Presentation plays in mirror mode but not extended desktop

My presentation plays in mirror mode flawlessly.
But when played in extended desktop has only one life. After 'escaping' out of a playing slideshow, I am then unable to play the slideshow again in extended desktop and must either quit out of Keynote or switch to mirror mode.
My computer is connected with a Sanyo PLC-XU74 data projector at our church. The problem also exists when I test it connected to my Panasonic LCD TV at home.
The problem is not specific to any particular file.
My older version of Keynote 3.0.0 works without this issue on both secondary displays (church & home) but will not play the file created in Keynote 09 (error message 'Keynote cannot open the file .... because it is damaged.')
My wife's MacBook plays the same files without issue in extended desktop mode on the same secondary displays.
Files created in her identical version of Keynote 09 (5.0.1) misbehave when I attempt to play them on my MacBook Pro - just a slightly different error message ... ('Keynote cannot play your slideshow because an error occurred.' )
Again the file will play initially, but when I exit out of the playing presentation there is no way to resurrect it without quitting and restarting the application.
My head is spinning ... should I reinstall iWork 09?

Kyn (et al)
Thanks for your input. Problem solved with software update to Keynote 5.0.3!!
Seems that the original iteration of Keynote 09 did not like the hardware in my fancy new MacBook Pro. Whereas it was quite content with my wife's older MacBook. It would appear this bug is fixed ...
(Should have done this first - downloaded software update ... that's what you get for being stingy, or living in a remote part of Australia with a dribble of an excuse for broadband internet via satellite!!)
Cheers to everyone who poked their head in ...

Similar Messages

Embedded swf plays in preview mode but not when loaded onto site

http://delormdesigns.com/Oxen2008/2008Fair.html
I have created a swf by first creating an flv from an avi then publishing the swf in flash. I inserted into an html page and can see the video on preview. However, when I load the page and all of the assets onto the site, I get nothing.
I tried to view the swf directly, and it does not play. This may be an issue with how I converted the avi file or how I published the swf. I am starting in this forum just in case.
Thanks!

Yes, I did exactly what you recommended. I swapped the swf with another, loaded the page, and tested it. It worked perfectly. So, even though the original swf worked fine during the preview test, there must be something about the file that does not work when loaded on the site.
I found an article about creating and inserting a flv file from an avi...that will get me 1/2 way there so I will be trying that. Perhaps there was a step in the avi to flv process that needs fixing...and then the swf creation would work.
I appreciate your responses!
~ Caprice

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?am in

In Finder you will find the voiceover in the project's package contents folder. If on your internal drive, the project will be in your User (Home) folder Movies/iMovie projects. If on an external drive it will be in the iMovie Projects folder at the top (root) level of the drive.
Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu. There should be a file named something like Voiceover Recording.caf in the package contents folder. Copy and paste this .caf file to the Desktop. See if it will open in QuickTime, GarageBand or another program capable of editing audio, such as MPEG Streamclip or Audacity (both free). If it will open, save (export) it in a different format, such as AIFF, preferably to a location where it will not be moved, such as iTunes.
Now drag that file into iMovie to the desired position (if in iTunes drag from iMovie's music browser panel). Hopefully it will now play correctly.
John
Message was edited by: John Cogdell

Rented movies used to play in airplane mode but now won't load

Rented movies used to play in airplane mode but will no longer load. Does anyone know why?

What do you mean by "load" exactly?
Have you already placed the entire rental movie on your iPad? If you have not, and you're in airplane mode, then that would present a problem.

Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv

Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv
Thanks

What model of Mac? Mirroring will require a model from 2011 or later, running OS X 10.8 or later
About AirPlay Mirroring in OS X

I bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! its a Dell XPS 1330 with HDMI.....

i bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! and the oiption it gives me is to rebuy an SD version.......BS!!! my laptop plays HD! its a Dell XPS 1330 with HDMI.....how can i get this HD Ted movie to play on my laptop, as my mini pad has no HDMI cable to plug into my TV.

Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

PSE 10 will print from the organizer and in sharing mode, but not from full edit

I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share. Any thoughts on what I'm missing? Thanks for any help in advance.

This occurs frequently with HP printers, though others are implicted as well from time to time
In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
http://kb2.adobe.com/cps/865/cpsid_86566.html

TS2610 My project plays on any Mac but not on my dvd player. Please advise.

My project plays on any Mac but not on my dvd player. Please advise.

Unfortunately that didn't do the trick. For the life of me I can't figure this one out. However, if I author it using iDVD (with the same media) it works? I'd make do with IDVD if I could get rid of the Apple logo in the lower right corner.

HT1349 My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

CSS rules show up in design mode, but not in live or in browser.

So some rules work in the browser some appear when in design mode, but not in live mode or in the browser.
In one case there is no competing rules I applied background color and border color to a dynamic table and I see the colors in design view. In another there is a competing rule, but the one that wins is #content, when the rule I want #content #footer p is (obviously) a compound and at the bottom of the rules.
Any thoughts?
Thanks
Gregg

AH In preparing my stylesheet to show you, I noticed the rule above those two was missing it's ending curly brace. Problem solved! That's what I get for checking code when I am sleepy!
Thank you SnakeEyez02
Gregg

Why can firefox beta, aurora, and nightly open in windows 8.1 desktop mode but not app mode?

The applications will launch in desktop mode but not in a windows 8.1 app I am hoping for help with this I have tried everything to fix crashing or slowness and have reinstalled the program in aurora nightly or even firefox beta forms. Help!

Hi!
You may want to take a look at https://support.mozilla.org/en-US/kb/how-do-i-install-firefox-windows-8-touch
I would assume the options to switch into it would be the same. I can't confirm though since I don't run Windows 8.

Songs playing on one computer, but not on others.

I use my iPod on three different computers (Home/Work/brand new laptop). I recently upgraded my iPod from original 80gb to new Classic 160gb. Before I purchased my new iPod, I transferred my whole library (about 50gb)from my iPod onto my new laptop(using transfer software). Then when I purchased my new iPod I synced the whole library to the iPod. The problem is that when ever I connect my iPod to my work or home PC some songs have an exclamation mark next to them (and they don't play). So when I went to replace the "exclamation marked" songs from the laptop (where the whole library exist), I had NO exclamation marks. So my question is why do the songs play on one computer but not the others? Please help!

It looks alot like the problem we had when we couldn't resolve the CUPS server FQDN. But the desktop and laptop are on the same subnet and use the same DNS servers. I can ping the CUPS server by FQDN from the command prompt on both
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:46,319 [0x00001394] WARN LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::RegisterWithNextProxy[2852] - Order of routing attempt: :5060(TCP)>. Attempting to register to
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiSinks - (WABIMSG_REGSTATE6) ********* CUPS (@) (slot 0) REGISTER STATE: Registering... *********
2010-02-11 14:57:49,787 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:49,787 [0x000016f4] ERROR LCWabiSinks - (WABIMSG_REGSTATE11) ********* CUPS (@) (slot 0) REGISTER STATE: FAILED!! code=503, reason=Service Unavailable *********
2010-02-11 14:57:49,787 [0x00001394] ERROR LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::onFailure[3561] - Failed to register! error-code: 503, msg: 'Service Unavailable'. Retry in 20 second(s).
I swapped out the username for and the domain with to protect the innocent. Or maybe the guilty; we will see. From the command prompt I can ping BC-IPT-UPS. and I get a response from the CUPS at the correct IP address.

Flash Plays in Google Video but not in You Tube

I have Explorer 8 - latest Flash Player is enabled but it only plays in some sites but not in others - and for the sites it plays in it doesn't load automatically - i have to click on that bar that appears at the top of the browser window to allow it to play - other site tell me that i need to download Flash Player - pain in the neck - any one else have this problem? is there any way to fix it?
PS - i have been looking at adobe products for possible purchase but this is not a good showcase for their products -

I've been having the same problems only with different web sites. It's been happening to me since the end of March...I'm getting really sick of it. I've changed my internet security settings, checked that I had all the latest program updates, uninstalled and reinstalled Flash, and so many other things, nothing has worked! I really hope this gets resolved soon.

Presentation plays in mirror mode but not extended desktop

Similar Messages

Maybe you are looking for