Presenter not loading into Power point - help

I need help
Been using Presenter in Power Point. it froze yesterday. Had to shut down. When re-opening computer and PP, Presenter was no longer there.
Have uninstalled Acrobat 9 extended, Presenter , and MS Enterprise (with PP). all new downloads. Re-installed. Everything acts like it installed fine, but NO Presenter inside the Power Point. Have repeated and re-peated. disabled McAfee. repeated. No luck. I'm running on a pretty new HP with windows 7.
Spent hours in chat with university helpers and hours with Adobe helpers - totally useless.
Any ideas out there?
Thanks
Carolyn

Try the Presenter forum:
http://forums.adobe.com/community/connectpro/connectpro_presenter?view=discussions&start=0

Similar Messages

Can not load any power point files, the Microsoft version will not work as well only open systems works

After upgrading to 10.8.3 I cannot load files into keynote, the apllication will freze about 75% of the load. My Microsoft Power Point application will load them but the when I try to play the presentation it will freeze. Only OpenSystems will load them and then play them with no problem. Can Any one tell me waht is going on? ...

Hi Gary,
The presentations were created originally with PowerPoint. I have been using them on both KeyNote and PowerPoint with no problem, even after updating to MountainLion. Problems started at the 10.8.3 upgrade. The installation was an upgrade form Lion. Yes I mean Open Office, I am able to open the presentation with Open Office and play it with no problems.
The presentation gets loaded by Power Point and the Power Point freezes. Key Note can not even load it. Stops 3/4 of the way. This happens with ALL my presentations.
I want to thank you for your help.
Leonardo

I can not delete some power point files in the trash.help?

I can not delete some power point files in the trash.help?

Hi Gary,
The presentations were created originally with PowerPoint. I have been using them on both KeyNote and PowerPoint with no problem, even after updating to MountainLion. Problems started at the 10.8.3 upgrade. The installation was an upgrade form Lion. Yes I mean Open Office, I am able to open the presentation with Open Office and play it with no problems.
The presentation gets loaded by Power Point and the Power Point freezes. Key Note can not even load it. Stops 3/4 of the way. This happens with ALL my presentations.
I want to thank you for your help.
Leonardo

Help! Help! Help! Why is DPV and LACS not loading into memory ?

Postalsoft Desktop Mailer - load into memory is checked and it does not load into memory,
I tried it unchecked and it is the same speed.
How do I fix this problem?????

Tim,
Please make sure to post any "classic Firstlogic software" questions under the Business Objects Enterprise Information Management (EIM) forum and you will get a much faster response. Also you can log a case for support by going to the Help and Support tab on the SAP website, then click on Report A Product Error to log a case for support. Just make sure to choose BOJ-EIM-COM for the component when logging a case for DeskTop Mailer or Business Edition.
Steve is correct.... we are aware of the slow speed issue with address correction when using DPV and LACS in DeskTop Mailer and Business Edition 7.90. Rev 4 should be out by the end of this week. This will correct the speed issue. Please make sure to have the auto update option turned on in the software so you get this update.
Thanks,
Kendra

Can't embed a Captivate video (swf) into Power Point 2007

I am trying to embed an Adobe Captivate video (swf) into power Point 2007. I very carefully followed all the steps outlined from a search I did on the web and it is not working.
These are the steps I followed:
1. Create a simulation using Adobe Captivate and publish it as a SWF file.
2. Open the PowerPoint presentation and insert a blank slide for adding simulation.
3. We need to work with the Developer tab now. If you can't see it in the ribbon, follow these steps to make it visible.
(steps to get developer)
4.On the developer tab, in the Controls group, click More Controls
5. In the list of controls, click Shockwave Flash Object and click OK.
6. Drag diagonally to create a box in which the simulation would appear. Don't worry about sizing it accurately; you can adjust it later as well.
7. Right click the Shockwave Flash Object, and then click Properties.
8. On the Alphbetic tab, click the Movie property. In the value columnm type the full drive path, including the file name.
9. Set the Playing property to true, Loop to false and Embed Movie to true.
10. Close the Properties dialog and test the movie.
The simulation will now play in your PowerPoint presentation.
Note: If during the slideshow,t he simulation doesn't play automatically, right-click and select Play.
I followed these steps, and it is just not working. I go to play my power point presentation and set it to play from the beginning, and when it gets to the slide with the swf file, I just get a faded out still picture of the video, and it will not play. If someone has had luck with embedding swf files from Captivate into Power Point, please let me know how you did it. Thanks.

Thanks, I really appreciate the information. The only problem is that I have to keep it as a power point presentation. I convert from ppt to a video, so I need to keep it as power point.
I found these steps on the internet and followed them exactly, and went through the steps 3 times, to make sure I wasn't leaving anything out, and it just didn't work. I have a tech guy who's supposed to call me today regarding this issue, and hopefully he'll be able to go through it with me step by step to try and work it out.
Ultimately, these are going to be training videos that are going to be set up on a website, so they ultimately have to be saved as videos.
I'm keep trying to figure it out though.
Thanks.
Ariane

Embed dynamic smart view report into power point

Hello All.
can amyone help with How to Embed dynamic smart view report into power point
Thanks.

Have you tried dragging and dropping onto a ppt slide? I just did and showed up sheet one of the workbook. If you have many sheets in the workbook and want to show a particular sheet/data, you may want to save workbook with that sheet visible when you reopen. One thing I have not checked is dynamic content of the worksheet.
Venu

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

CDC Error (JOURNALIZED DATA is not loading into tartet database)

HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer Hussain

Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

Report into power point

Hi
I would like to display Bex report or web report into Power point, I never seen this feature anywhere, is there anybody has idea about this or is there any other tools are supporting. Thx in advance.
Regards
Venkatuk

hi TK,
do you mean capture the web report screen ?
if so try if software SnagIt helps
http://www.techsmith.com/products/snagit/default.asp
and check this thread
Web report to Power point
hope this helps.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Cropping web images to paste into power point

I have a web image that I would like to crop using photoshop elements, and paste into power point with out a background.
I used the magnetic lasso tool to out line the crop area, select cut, and when I paste it into power point, a rectangular background comes with it. How can I paste just the selected area?

It is probably a format thing
Jpegs do not have transparency. That is probably what you are using.
Gifs have transparency. I think Tiffs and PNGs do also.
Try one of those.
I just noticed you used copy>paste
Maybe you should try insert>picture>from file.
If you can't get this to work, try matching the power point background in PSE. That will give you the illusion of transparency.

All of a sudden my CDs will not load into my iTunes ...

I just recently noticed that cds will not load into my library, nor will iTunes prompt me to play them when inserted. You can hear the machine plunking along as if trying to read it, then it will automatically eject. What gives? Have not had this problem before...I am running iTunes 9 on a iMac with OS 10.4. thanks.

Hey aj5c,
Let's see if resetting Safari helps the issue:
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/PH11914
For best results, make sure all of the options are checked.
Thanks,
Matt M.

Iphoto does not load into iDVD- too many photos?

Recently upgraded to Leopard 10.5.6 and iLife '09. Ever since, iPhoto will not load into iDVD (iphoto 8.0 and iDVD 7.0.3). When trying to open current and new projects in iDVD, the project opens, and plays, but the photos from iPhoto never load, the loading icon just spins on and on. When I open a new document, the same thing happens. Tried trashing preferences in both programs, reinstalling iLife, and reparing permissions. All software updates are current. Still won't work.
I am starting to wonder if it has to do with the number of photos I have in iPhoto, which is about 4000. The photos loaded with no problem until I upgraded. Could it be that the upgrades in iPhoto just make the files too large, and it's too much to expect that many photos to load? Does anyone know how many photos is too many,— or can you suggest anything I have not tired that might work?

This is from Mac Help. It is a good idea to create another account to use in troubleshooting situations such as this. After you create the new account, open iDVD from that account. Try creating a small project to see if you are having the same problems. Post back with your results.
_Adding a new user account to your computer_
You can create individual user accounts for each person who uses your computer. Each new user has a separate home folder and can adjust his or her own preferences without affecting other users.
Choose Apple menu > System Preferences and click Accounts.
If some settings are dimmed, click the lock icon and type an administrator name and password.
Click Add and type the user's name.
If you don't want to use the short name generated automatically, type a new short name. (Once the account is created, you won't be able to change the short name.)
Type the user's password in the Password and Verify boxes.
Type a hint to help the user remember the password if they have trouble remembering it at login.
Click Parental Controls and select options to determine what the user can do with the computer.
If you change your mind while you're creating a new user account, click Delete to cancel.

Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

To answer some basic questions posted to aid people in helping me. These are
I believe it is version 11 of iphoto as i tried to update but it says it has the latest update and Mac is 2 weeks old from new.
OS is Lion.
I have just tried to look everywhere on the Mac to see where the photos might be.
There are no error messages showing on screen and it was fine before my wife did what she did. Even though we have back -ups of 95% of the pictures. I would like to know what happened so that it won't happen again.

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?

Why won't Canon Raw images in IPad air photoroll NOT load into LightRoom Mobile ?
I can import Canon Raw images from my s120 into the iPad Air's photo roll but then the import from photoroll into LightRoom Mobile collections fails.
Any ideas on how to get this working ?
Thanks,

Raw import is not yet supported by Lr Mobile. You can vote for this feature request Lightroom mobile: Ability to import raw files

Presenter not loading into Power point - help

Similar Messages

Maybe you are looking for