Preventing setup/cleanup from being displayed during exec.

I am trying to prevent the setup/cleanup sections of my sequence from being displayed during execution. (i.e. I do not want the users to see anything other than the main sequence). This way they can see the progress being made through the sequence and the cleanup sequence will not block the view of the main sequence(and the values from individual tests).
If anyone has a clue how to do this please let me know.
(Note: I still want the startup/cleanup to run, just invisibly)
Thanks

This tracing option is set in the Station Options. In Sequence Editor, goto:
Configure >> Station Options, Tab Execution: Remove the checkmark from "Allow Tracing into Setup/Cleanup".
Regards, Guenter.

Similar Messages

Preventing Password Characters from being Displayed

I know this question has been asked and answered about a billion times but I can't seem to find any definitive answer as to how it will be addressed or if there are any plans to address it in the future.
We all know that when an iPad, iPhone, or iPod Touch user is prompted for a password (AppleID, enterprise, web site, etc) that the characters are displayed before being concealed by a black dot. Again, arguing over how ridiculous of a design flaw this is, at this point, completely moot. However, does anyone from Apple have an answer as to what will be or can be done in the future?
My situation is this: I am an IT administrator in a private Jesuit school. Nearly all of our faculty have been given iPads and we have installed AppleTVs and new projectors in all of our classrooms for the faculty to mirror content on their iPads rather than using a desktop PC (we're trying to phase desktops out of the enterprise except for labs and work areas).
All faculty using iPads have been briefed on this situation and we've had very few occurences of passwords being compromised. However, even the most vigilant educator slips up and, just today, it was determined that one of our teachers' test banks (which resides on the teacher's network home share) was accessed by a student who saw his password during an iPad mirroring session. The student copied tests and distributed them to his classmates.
Besides venting a little and looking for some sort of solution, what I would like to know is Apple plans on addressing this in the next version of the IOS. Frankly, for the inroads that Apple has made into the classroom and enterprise with iPads, there appears to be very little thought given to how little things like password security and AppleID/iPad provisioning and the difficulty managing these things can affect an institution's decision to introduce a device that holds so much promise.
Any case, if anyone at apple is listening, I VOTE THAT YOU OFFER SOME WAY TO CONCEAL PASSWORDS WHILE THEY ARE TYPED INTO THE PASSWORD FIELD (this can be configured as an option on Android devices, not sure why Apple can't do it).

No sorry, The only way I can think of would require modifying the iOS itself. Unless you can find a password management app that would allow copying and pasting without showing the characters. I use mSecure, and with that one can paste-to-clipboard a password without actually displaying the password. As long as the app you are pasting the password into supports hidden password characters, you can paste the password into the field without it every dispalying any characters. It works that way at least with the apps I use (banking/financial apps, for example).
The onle issue with mSecure is that if you tap a bit too far to the left of the "copy to clipboard", you will display the password. But there are lots of password manager apps in the app store, so I'm not saying msecure is the only or even the best option.

In filters (liquify) my pic is black, when I click on the black screen I keep getting a message that my background settings is preventing the image from being displayed.. please help

Could someone please help with a step by step for dummies to rectify this.

With these settings it does not raise that alert for me.

Is there a way to prevent HTML from being displayed in forum?

Is there a way to prevent HTML from being displayed in forum in BC to avoid linking to other sites on an eCommerce site?

Thank you for your post!
Unfortunately there isn't a way to restrict customers to post on your forums links to other sites.
However what I suggest here is to choose to moderate each forum post and this way you can choose to approve or remove links from the posts sent by customers.
I hope this helps!
Andrei

Preventing Podcasts from being displayed as Music and\or songs.

How can I prevent Podcasts from being displayed as Music and\or songs?

Welcome Mr. Lutz,
Note: This is for Windows version of iTunes because this is the OS I'm running. Even with diferent OSes, the process should be similar enough.
1.Open iTunes
2.Connect your iPod
3.Highlight it in the source list
4.Go to Edit, then Preferences
5.Click on the iPod tab
6.Click on Automatically update selected playlists only
7.Click which playlists you want on your iPod
8.Switch to the Podcast tab
9.Select automatically update all podcasts
10.Click OK
11.Disconnect your iPod
12.Now, follow steps 1-7 with one of your daughter's iPods.
13.Now, switch to the Podcast tab
and select Do not update podcasts
14.Click OK
15.Disconnect the iPod.(Repeat Steps 12-15 with the other mini.
This should allow your iPod to update your songs and podcasts, and allow your daughters to update their songs and no podcasts.
Happy iPodding,

Preventing expired batch from being sold

Currently in one of our client's setup, I can select expired batch from the list of items. Is there a way to prevent expired items from being selected when creating sales order (VA01) or, if the user can select the expired item, at least display an error or warning message?

Hi,
Do try making the batch in resticted use in change batch basic data1 tab,activate radio button of batch status for Batch restr.
It makes
Batch in Restricted-Use Stock
Specifies that the batch is included in restricted-use stock.
Use
If, though a batch has the status "restricted", you want to use a goods movement to post a quantity to unrestricted-use stock, the quantity is posted to restricted-use stock and not to unrestricted-use stock.
If the status of a batch is set to restricted, the total unrestricted-use stock is transferred to restricted-use stock by means of a transfer posting. A material document is created.
You cannot change the status of a batch (unrestricted/restricted) in a goods movement, only with the following functions:
by maintaining the batch master record manually
using the control function provided in the QM system
Configurations for Restricted-Use Stock
For planning purposes, restricted-use stock is treated like blocked stock, that is, it is either available or not available, depending on your system configuration.
Withdrawals from restricted-use stock are either possible or not possible, depending on your system configuration.
The status of a batch can be considered in batch determination, that is, you can search for unrestricted or for restricted batches.
_(This has been adopted from SAP documentation.)
Change batch T.code-*MSC2n*Regards,
Reddyy

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

How to lockdown and prevent add-ons from being installed?

Hi. I'd like to lockdown an installation of Firefox on a Win XP computer, to prevent add-ons from being installed by limited account users. How do I accomplish this please?

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
lockPref("xpinstall.enabled", false);

How to stop volume icon from being displayed randomly

How to stop volume icon from being displayed randomly

Thanks for the quick response.
I have a number of slides which act as a training module. The quiz follows this. All the answers to the quiz are in the module slides. I'd like the user to be able to see which questions they're failing on, but not be shown the answers, as, if they are failing the quiz, the whole module needs to be reviewed and the test retaken.
If this isn't possible, I'll probably just remove the review option, thereby meaning my retake button can stay, and the user can just go back and re-read the module slides to learn the answers.
Thanks

[svn:osmf:] 9861: Fixing bug where sizing pixel from the previous run of updateIntrinsicDimensions would prevent the dimensions from being decreased .

Revision: 9861
Author:   [email protected]
Date:     2009-08-31 23:08:03 -0700 (Mon, 31 Aug 2009)
Log Message:
Fixing bug where sizing pixel from the previous run of updateIntrinsicDimensions would prevent the dimensions from being decreased.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/layout/LayoutContextSprite.as

Prevent OST file from being excluded from workstation backups

Is there a way to prevent OST files from being excluded from client/workstation backups in WS2012E?
Thanks,
Reg
This is especially a problem for clients that have migrated to Office 365 exchange service as they have no local backup of emails that were deleted and think synced with Office 365.
Reginald Hook

OST files are not a local backup, they are a cache of what is in the mailbox.
https://support.office.com/en-gb/article/Introduction-to-Outlook-Data-Files-pst-and-ost-6d4197ec-1304-4b81-a17d-66d4eef30b78#__toc290027730
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Is there anyway to set a passcode for my iPhone/iPad, but prevent the device from being disabled?

My wife and I have iPhones, and also have an iPad. We also have three children, and recently they have been trying to guess our passcodes so that they can watch videos and play games. Trouble is, after 10 attempts, the device will disable for 60 seconds, and then if the 11th attempt is wrong, the device will disable for 5 minutes, etc. My iPad is currently disabled for 60-minutes. Grrr.
Is there anyway to set a passcode to keep the children out, and yet prevent the device from being disabled on successive attempts? I realise that this feature is there to protect our devices from brute-force attacks, but we are being penalised, in that our devices become disabled for a period of time.

Well, so you have to ask: Is the problem your iPad or your children? Another question: If they're not to watch videos or play games, then why are they on the iPad in the first place?
Obviously you already know the answer to your question; there is no way to set it up the way that you want to. If you nonetheless feel that you should be able to do that, then put together your best case for it and make your wishes known directly to apple via their established Feedback links:
http://www.apple.com/feedback/ipad.html
Posting here is no substitute for doing that

[svn:osmf:] 14598: Fix FM-500: reinstating onMetaData handler clause that prevents incoming dimensions from being applied if they are not different from the dimensions that were already set .

Revision: 14598
Revision: 14598
Author:   [email protected]
Date:     2010-03-05 02:13:40 -0800 (Fri, 05 Mar 2010)
Log Message:
Fix FM-500: reinstating onMetaData handler clause that prevents incoming dimensions from being applied if they are not different from the dimensions that were already set.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-500
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamDisplayObjectTrait.as

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

On a MacBook, in Messages, how do you prevent your IMs from being sent as texts?

In Messages, how do you prevent your messages from being sent as texts?

Shootist007 wrote:
Not sure how and why this type of thing started but it seems every program you install these days likes to start part of itself when the system starts.
That started with Lion and progresses with the hillside feline. Ever since that pair got a personality disorder and can't make up their mind whether they're computers or phones, the world went to the dogs. "Always on" paradigm my azz!

Prevent "We're opening your workbook in Microsof Excel" message from being displayed

Hi all,
I have multiple environments with SharePoint solutions installed on them. Almost all of them are working fine except one that has an issue and don't know how to solve it.
Each time I open an Excel file in Excel Services and then choose to "Edit in Excel", the following message is being displayed and Excel Services do no close automatically as it does on the other environments.
How can I fix this?
Thanks,
Florin

Did you check this
https://social.technet.microsoft.com/Forums/en-US/590617de-629f-413b-8c11-f3cc79e27e7a/excel-2013-error-on-open-were-sorry-but-excel-has-run-into-an-error-that-is-preventing-it-from?forum=officeitpro ?
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Preventing setup/cleanup from being displayed during exec.

Similar Messages

Maybe you are looking for