Preventing the deletion of a PO with IR but no GR

Hello guys,
I am facing a requirement to prevent the deletion of non-GR related Purchase Orders. The POs are still marked as complete since an invoice has been released.
When trying to delete complete GR related POs, we are getting the following message: "Quantity delivered differes from qty invoiced (Function not possible)"
However, when there's no GR linked to the PO, the deletion is going through.
How can I prevent this?
Thanks

Hello guys,
I am facing a requirement to prevent the deletion of non-GR related Purchase Orders. The POs are still marked as complete since an invoice has been released.
When trying to delete complete GR related POs, we are getting the following message: "Quantity delivered differes from qty invoiced (Function not possible)"
However, when there's no GR linked to the PO, the deletion is going through.
How can I prevent this?
Thanks

Similar Messages

  • I downloaded lion but it wont install, it says that the software has been tampered with. But i downloaded from the app store.

    I downloaded lion but it wont install, it says that the software has been tampered with. But i downloaded from the app store.

    I have been through the same process three times now. The downloaded file is 4.07GB. I deleted it and re-downloaded and I get the same error.

  • After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.

  • Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

    Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

    I can't! Tried to deleteit  from the iphone and from itunes but the X doesn't appear!

  • I want to buy the new iPad in America with 4G, but I moving to Australia permanently. Will I be able to use any 4G networks once they are supported in Australia?

    I want to buy the new iPad in America with 4G, but I moving to Australia permanently. Will I be able to use any 4G networks once they are supported in Australia?

    Actually it depends on the Bandwidth of the network they will be using. You can see a list of tech specs on the iPad website.

  • Preventing the deletion of the workspace(Directory) while it is in use

    Hello,
    I have application which allows user to create the workspace.I want to avoid deletion of the workspace from backend while java application is using it.
    Eclipse has the this feature ,when i create the workspace("ABCWorkSpace") and start the Eclipse and now from the windows explorer if i try to delete the workspace("ABCWorkspace") ,it won't allow me to delete it.This might be because of the .lock file created in .metadata folder.
    I want the similar feature .Could anyone please sugest the way to handle this requirment.
    Appreciate your time.

    Thanks for your quick reply.
    I may be little wrong in explaining the problem .I will explain it again
    --I have application which allows user to create the workspace.I want to avoid deletion of the workspace from backend (i.e avoid manual deletion of the workspace from windows explorer)while java application is using it.
    -- The one way might be i open one of the file present in the workspace using the fileInputStream from the workspace
    like
    final currentWorkSpace ="C:\\MyWorkSpace\\config.txt"
    FileInputStream fis =new FileInputStream(currentWorkSpace);
    --Now if i tried to delete the workspace manually from the windows explorer it wont't allow deletion saying
    "Cannot delete config.txt.It is being used by another programm or person ....."
    --Using above approch i can prevent manual deletion of the workspace named "MyWorkSpace" and the file "config.txt " but it allows deletion of the other files present in "MyWorkSpace".
    Appreciate your time .

  • Is it possible to make the delete button work properly with google apps hosted gmail accounts?

    The subject says it all.  This has been ungoing problem for YEARS.  Has anyone come up with a fix or work around?  It is ridiculously annoying to have to come home and delete 100 messages I already saw over the course of the day and know are worthless...

    Unfortunately I do not have that option. 
    That screen gives me the following:
    Account
    Mail on/off
    COntacts on/off
    Calendars on/off
    Mail days ot sync
    Mail folders to push
    Delete account
    That is all I have.
    If I go into account form there I have:
    Email:
    Server:
    Domain:
    Username:
    Password:
    Description
    Use SSL on/off
    That is all I have.

  • My wifi will not turn on. The button is settings seems to be locked. I tried turning it on from the control panel, and also with Siri, but it still does not turn on in settings, so i cannot access wifi. Please help ASAP

    Wifi will not work. The button in settings seems to be locked. Tried control panel and siri to turn it on, doesnt work because the settings wont turn it on. Need help ASAP cause my data limit is approaching.

    If the battery was completely drained the iPad will not respond for some time after connecting it to the charger. Connect the iPad to the charger that came with it and plug that into a good wall outlet. Wait 30 minutes. Then reset the iPad.Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    If the iPad restarts let it continue to charge until it's battery shows fully charged. If the iPad still does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to back up your device before taking or sending it to Apple.

  • I've lost all the files that were on the desktop.  All the folders  are still there with subfolders but the files have all disappeared.  Someone please help!

    It's been over a month since I accessed my files for work. (microsoft office, photos, videos) Today when I came in to work I realized that all the files on my desktop had disappeared. (it's just the desktop) I didn't do anything with my computer.  I didn't use my computer for almost the entire month.    I don't know where they are or what happened.  I really need these files back ASAP..... help please! 

    Unless the files were dumped in the Trash unintentionally, your files are still on your computer, somewhere. It's pretty easy to put files or folders in places without knowing it, but there is a good technique to find your data.'
    Think over a file or folder whose name is familiar. Then, press Cmd-Space at the same time, which brings up Spotlight - the easiest way to locate files, folders, history, and much more. If you end up with a blank the first time, try again until you have a hit. If you have a hit, note the location of the files/folder; it's likely that all of your lost documents are in the same place.
    Post if you have success, or need more help!

  • I bought a used mac air notebook the computer says it comes with iphoto but i cant find it help please

    i need help finding i photo on my mac air

    The license to use iPhoto is not transferable. It is included with new Macs, but it cannot be sold, so it will not be on any used Macs. You will not have iMovie or GarageBand either.
    You must purchase your own copies of these apps from the App Store.

  • Linn kinsky does not show all music folders - only the one which was created with wma but not the flac files wich where created with winamp

    Who can give me advice - do i have to change settings in i pod touch or in the folders from my computer ?

    Linn Kinsky is a app which helps you to control your LINN  audio - streamer
    This Kinsky programm is available for computers and apple products as well.  So the Kinsky programm runs perfectly on my windos computer and after reading articles i decided to purchase a more handy ipod touch to control my audio-streamer instead of using the notebook.
    unfortunately wma files are shown only. Meanwhile i ripped some cds as AIFF because I expected the problem here but nothing has changed.
    Anyway thanks for your answer Matthias

  • I have the new IPad and the sound does not work with games but works everywhere else, any clue?

    IIiiiiii

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can I change the key to delete a message from the delete key to command-delete like it is in the finder?

    These new forums confuse me... Sorry.
    I often think I am typing in another window but I'm actually typing while Mail.app is selected.  When I discover this, I often (without really thinking) start whacking the delete key.  When I whack the delete key, of course, a message is moved to the trash.  So, without really thinking about it, I delete three to six messages.  Go ahead -- call me stupid.  But...
    If delete is not used to delete files in the Finder, then why is it used to delete files in Mail?
    One group suggested making customer keyboard macros.  Sounded like a plausible solution.  I could make a customer keyboard macro so that delete did nothing (or something benign) and make command-delete delete the message.  Alas, using the Apple => System Preferences => Keyboard => Keyboard Shortcuts => Application Shortcuts gave me no Joy because it won't let me do either of those.  When I try to enter either delete or command-delete into the "Keyboard Shortcut" box, it just beeps at me.
    Does anyone here have a suggestion?
    Thank you,
    pedz
    p.s.   I can get the deleted messages back using Undo (repeatedly) but I think that is new with Lion.  So life isn't tragic but it still is an interface that I'd like to change if I could.

    You can define your own custom keystrokes in System Preferences -> Keyboard.  I'm not 100% sure that this blocks the old keystroke, though, and am posting from my iPad and can't check that at the moment.

  • I'm not able to delete games. My icons jiggle but not getting the "x" in upper left corner. This just happened; any suggestions????

    New at this this but need help: I can't delete icons from my iPad. They will jiggle but I am not getting an"x"  in the upper left corner. I have never had this problem before.  Any suggestions how to correct this????

    Built in apps can't be deleted.
    If it's not the built in apps, then maybe you've enabled restrictions to prevent the deletion of apps. Look in the settings, restrictions and see if you've locked that out

  • Prevent ChaRM Deletion???

    Hello Gurus,
    I am aware that deleting service desk messages is not a straight forward task.
    As ChaRM is also based on service desk, I assumed that ChaRM messages too cannot be deleted. But, it behaves the other way. We are able to delete ChaRM messages. I am sure there should be a way to avoid ChaRM deletion.
    Can anybody throw some light in this regard? Your help will be greatly appreciated.
    best regds,
    Alagammai.

    Hi Alagammai,
    You can use the authorization objects CRM_ORD_PR and CRM_ORD_OP to prevent the deletion of change transactions. Please remove the 'Delete' authorization from these Authorization Objects.
    Also refer to SAP Note 881553.
    It is very important that you remove the delete authorization from user roles - since the CRMD_ORDER transaction can be used to delete all transaction types including maintenance cycles.
    Regards,
    Kriti Bhalla

Maybe you are looking for

  • Invoice Lines spill over to top of the second page

    Hi, I have a program that prints invoice and its lines. Looks like if there are too many lines that do not fit one page, it spills the lines on top of the second page rather than the space provided for lines. How can I correct this so that the line a

  • Limited Number of fire wire ports

    I am editing with Final Cut Express using my laptop (MacBook). There is only one fire wire port. So in order for me to capture the video footage I have to capture from the camera to the computer's hard drive and then transfer to my external drive. It

  • Oracle 10g installation on aix 52

    Oracle 10g installation is failing on a aix52 64bit machine After installing the product running $ORACLE_HOME/root.sh for setup as user root results in the following errors: exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin

  • TNS-12560: TNS:protocol adapter error - Of a different sort

    Hi , Have a unique problem. System :- Win 2K I have installed 9iDB & 9iDS. They were working perfectly fine. I was able to connect to DB from forms. But due to some restrictions i had to resort to 6i forms. Now i installed 6i forms on the same machin

  • Using IDOC_INPUT_DELINS_START

    I neeed to create a scheduling agreement for inbound IDocs using IDOC_INPUT_DELINS_START. Don't see no examples in the forum on how to populate the parameters - has anyone used this FM before and can you send a code sample? Thanks