Preventive Work Order Dates Synchronization with its automatic created  notification

Dear all,
Preventive Work Order Dates Synchronization with its automatic created  notification
My question was initiated from PM module forum, please check above URL if you have time.
My ultimate problem is that :
     "SMOD" Enhancement  "QQMA0018" needs to receive its origin data of work order when the execution time of IP10 or IP30.
     so that I can decide/calculate desired dates on the notification according to its origin work order date .
Do I need to use "export/import memory" statements to communicate with origin work order?
if it's true
Thanks for your help in advance.

Dear Pete,
I just made test data in our DEV server,
Work orders has been created by "IP30" which was executed today with its maint. plan( date format DD.MM.YYYY ).
below work order has been created and the basic start date seems derived from plan date.
below image is showing our 'SPRO' configuration for the PM priority.
"ZM03" order type is using "ZP" priority type.
(I don't know why is this work order didn't take the values defined on 'priorities for Each Priority Type' for calculating "basic start" & "basic finish" date, it seemed just copied same date with PlanDate)
you can see the notification which is created automatically by work order as below.
"M4" notification type is using "ZP" priority type as well.
It took the 'required start' date by adding 2 weeks from today(=creation date) as 'priorities for Each Priority Type' has defined and 'required end' date also set to 6 months later from 'required start' date.
(Am I right?)
Please let me know, if you need further information.
Thank you for your help.

Similar Messages

  • Work order dates calculated by priority when created by maintenance plan

    Can anyone tell me how to get the dates on a work order created via a maintenance plan to be calculated from the priority?  I know how to get the notification dates to calculate from the priority when created via a maintenance plan but I can't seem to get the order dates to do the same. 
    Any info would be most appreciated.

    Check these links
    Influence Order basic start/end dates from maintenance plan
    Scheduled Maintenance basic start and finish date

  • Prevent work order business close when there is open PO

    Hello,
    in standard SAP, when the work order have open PO, i will get a warning when i perform business close.  However this is only a warning.  On the warning window, if i click "Complete" option, i still can proceed to close the work order.
    This will cause me headache later if user somehow "accidently" click complete when they should now.
    Is there a way to make this a Error insted of warning or anyway to prevent order business close when the order have open PO.  Basically all i want is to prevent the work order business close when there is open PO.
    Thanks a million.

    There are order where due to urgency, the work is carried out first.  In this case, order is created then work done.  The PO is created later.
    When the PO is created, the cost is not shown as actual cost in order but rather its planned cost.  At this stage, someone can accidentally close the order even the PO is still open.  I understand that if there is cost in the order, CLSD is not possible until settlement is done.
    There is a workaround with CO99 + note 687572 but i wanted to prevent CLSD thru IW32.
    You can try this...
    1. Create a work order with a non-stock item. this will create a PR
    2. (if required) release the PR
    3. create PO from the PR
    Do not perform MIGO.
    4. TECO the work order
    5. perform business close from IW32.
    At the warning window, click "Complete".  You will see the order is CLSD.

  • Data Synchronization with laptop.

    Hi All,
    iam new to mobile programming.
    iam sorry if iam posting this issue in a wrong forum.
    my problem is.
    my customer will have a laptop which has wireless connection with a network.
    he connects to my application when the network is available and he performers normal insert,update or any such operations.
    now he wants the same operations to be allowed when he is away from network i mean when his laptop is not connected. but it should store the information at the local database and once the connection is acquired then the data must get synchronize with my application.
    this synchronization should happen automatic or on demand basis.
    to put the problem more clearly.
    we can take the analogy of microsoft out look mail client.
    which allows us to draft mail even or when no connectivity and it will be in outbox as long as there is no connection(in case when there is no connection) once connection is acuired then the mail will be sent automatically.
    please help me how can achieve the above.
    if any body can provide me the example links or steps to performe then i can take care of the rest.
    Thanks in advance
    Ravi

    Yes, I installed Palm Desktop 4.1.4 successfully and brought in the application directly from Palm.com. The check mark is next to Local USB (when I right-click on blue and red HotSync icon). I cannot Sync.
    What other settings do I need to 'look at' or 'confirm' within HotSync? Please advise!
    Post relates to: Palm V
    Post relates to: Palm V

  • Asset master data synchronization with HR Master data

    Dear Experts:
                          I am FI consultant and i am doing Research on Synchronization of asset master data with HR master data. Our management wants that if company gives any thing which is regarded as an asset e.g Laptop, expensive tools e.t.c to its employee then beside opening its asset master data in FI it should also be updated in HR Employee master data. For this from FI side there are 3 asset classes for which we want that if any asset is opened in these classes then the data should be updated in HR. I have turned on Personnel number in screen layouts and have fetched this field in asset reports. We want
    1...Asset Description
    2...Cost Center
    to be updated in HR master data. Now my question is that how this can be achieved. Is it possible? What configuration will need to be done for it.
    Regards

    Hi
    FOr assets created in FI and reflect them in HR use the feature ANLAC and it will take care.
    This feature determines whether or not the system checks the fields Asset number in infotype 0040 (Internal Control) and Loan object number  in infotype 0040 (Objects on Loan) against database ANLA.
    R K

  • Master data Synchronization with SAP XI - IDOC

    Hi,
    I have scenario to synchronize master data between ERP1 -
    > ERP1, for example GL Account (FS00). Every time user make a changes in the ERP1 on the GL Account screen  (FS00), by automatically system will be generated IDOC and sending to XI.
    is that scenario can be done ? or have to do manually to send the IDOC.
    Please elighteen me.
    Best Regards
    Fernand

    Fernand,
    You can do it, by using Change Pointers. Please see the below discussion, it might give u an idea.
    Re: How to trigger an Idoc automatically when a transaction is saved?
    -raj.

  • Extract work order data from r/3 system in flat file(csv)and export to BI

    Hi,
    I am new in interface.
    I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
    This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
    Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
    Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
    Please provide the step-by-step proces to do this.
    Thanks
    Suchi
    Moderator message: anything else? please work yourself first on your requirement.
    Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

    Hi Ravi,
    you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
    BR Michael

  • How we can use existed REST data services with JSON to create MBO??

    Web site having REST web services with JSON format data interchange. By using these service call how we can create MBO ( MOBILE BUSINESS OBJECT ) in SAP Mobile Platform. Any Limitations are there for hybrid application development in SMP?? 

    You would need to parse the XML feed into your site with PHP or JavaScript. 
    http://www.w3schools.com/php/php_xml_simplexml.asp
    Nancy O.

  • Purchase requistion number and line item number linkage with work order opr

    Hello,
    I want to know what is the link between Purchase requisition number along with its line item number with work order operation number.
    For the non stock component assign to Work order operation ( say operation 10) the PR get generated for that component which assign to that operation .
    in which table we can find that PR as input and output as Work order number along with its operation .
    In AFVC table if we put PR as input then it does not show any entry for that PR number?
    Regards
    Vaibhav

    HI Vaibhav,
    If you have the Work Order Number AUFNR, then you can get AUFPL from AFKO.
    Then Pass AUFPL to AFVC table to get BANFN(Purchase requisition number) and BNFPO(Item number of the purchase requisition in the order).
    Regards,
    Ravi

  • Preventing Deletion indicator in PR once work order is completed

    Dear colleagues,
    Users create work orders in IW31 with the choice of external service; control key is PM02. Once work order is saved purchase requisition (PR) is created in background. With reference to PR, purchase order (PO) is created by purchase specialist.
    When work order is technically completed (system status TECO) deletion indicator is set to PR line item(s) automatically which result in undesirable situations since PR(s) has subject to release strategy in our system.
    Is it possible to prevent setting deletion indicator in PR once reference work order is technically completed?
    Kind regards
    Melih

    Hi,
    In this case that behavior has negative effects on PR Workflow process because in our system when PR(s) is created it is subject to release strategy according to preconfigured conditions.
    Once the order is technically completed (TECO) deletion indicator is set to PR line item(s) automatically meanwhile release strategy tab is disappeared from PR line item(s).
    In addition to that in ME54N system gives the MEPO822 (Purchase requisition XXXXXXXXX cannot be released) message even PR is approved before the order is technically completed.
    Kind regards
    Melih

  • Automatic creation of Work Orders on SAP

    Hello Friends,
    I have work order data in XML format.
    Now, I need to create the Work Orders on SAP automatically using that XML data.
    Please suggest the best possible method to resolve the issue.
    Thanks in advance.
    Best Regards
    Prasad

    Now, using this Idoc i need to create an PI Interface (File to Idoc) scenario and create work orders on SAP.
    Is that what i need to do? Please correct me if i am wrong.
    Please suggest.
    Thanks a lot!!!
    Best Regards
    Prasad

  • How is functional location linked with work order tables

    Hi, Experts:
    I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
    Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
    Many Thanks,
    Jenny

    Hi, Thyagarajan:
    Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
    Any suggestions?
    Thanks,
    Jenny

  • Automatic full duplex not working on Inkjet 1200 with W7

    I am using a Business Inkjet 1200dtwn with a clean install upgrade from XP2 to Windows 7 Premium.  Automatic Full Duplex worked fine with XP and HP’s driver; but Full Duplex will not work with the Microsoft driver that installed after the upgrade to W7. 
    Does HP have a driver for my combination?  If not, what do you suggest?
    Printer was purchased through the HP Store on 11/8/04.
    Product model number: C8156A
    Product serial number: TH47N11022
    Windows upgrade from XP to W7 Premium was purchased through the Microsoft Store earlier this year and is up to date via Microsoft’s automatic upgrade notification.
    I bought the HP Pavilion dv9000t Notebook through the HP Store on 12/31/06.
     Pavilion dv9000t, p/n: EZ379AV, s/n: CNF7012K4X.  aka: HP Pavilion dv9000t CTO Notebook PC. 
    This question was solved.
    View Solution.

    Congratulations on your Post!  As a Student you earned an A+
    Some time ago I got auto duplex to work by deleting the 1200 in Devices and Printers, Restarting just to be safe, then letting Plug-N-Play install the driver by enabling install to search my computer and the web to find the latest driver.  The new driver properties had the option to install 2 sided printing.  I clicked on the option and tne printer worked (just as you said). 
    Then I failed to post my solution.  My bad
    Thanks for your post! 

  • Updating PO confirmation and ASN through Work Order Confirmation

    Hi,
    We implemented PO collaboration and Supplier is doing PO Delivery confirmation and ASN.Now we are implementing Work Order Collaboration and system  created Work Order with reference to Purchase order.
    I want to know whether PO confirmation  and ASN date gets copied from Work order dates(after doing confrimation for phase Transport).
    I want to know what setting we need to do as presently it is not getting copied to Work order. And I want to know how it updates ECC confirmation tab for Purchase Order.
    Please do the needful
    Regards
    Raghavendra Pai

    Hi Raghavendra
    The above validation check will prevent supplier confirming purchase order request lines in PO details screen, so only supplier can confirm through WO confirmations, i.e by accepting the work order request lines in delivery overview, adapt the work order
    This will make the work status as CIAG from CINE, in negotiation to in agreement
    Then you can publish the work order, this will copy the confirmed data from the work order as identical request data and confirmation data to the purchase order. this data will be picked by ROC_Out and updates the po data in backend
    Please check whether ROC_out is available in customizing
    SPRO-SNC-BASIC SETTINGS-PROCESSING INBOUND & OUTBOUND-PROCESS TYPES OUTBOUND MESSAGES
    ASSIGN OUTBOUND MESSAGES TO DEFAULT PROCESS TYPES
    REPLORDC_O ASSIGNED TO ICH SUPPLIER COLLABORATION
    Still if does not trigger, kindlly check the log slg1
    it could be problem with ODM's ,POS etc
    Best Regards
    vinod

  • Line item Settlement and KOB5 for automatically created AUCs to PM orders

    Hello Experts,
    I am trying to set up line item settlement for automatically created AUCs. We would like to use line item settlement because we want to see the costs split up by either percentage or amount when settled to the AUC.  If I can't settle by percentage or amount to the AUC then i'd like to be able to temporarily block some of the costs from settling.  This is for billing not capitalization purposes since all costs will eventually settle to one final asset. The settlement is done using transaction KO88 or KO8G and automatic processing type.  I’ve configured a PM Order type as an investment order and set up the related investment profile and investment asset class.  Some of the things I've determined from my testing:
    Using transaction KOB5, costs can be split up by creating other distribution rules, but only to another object (i.e. another
    asset, order, cost center etc. by using the Preliminary) not to the automatically created AUC linked to the order
    The default settlement rule is account assignment category FXA, percentage rate 100%, settlement type AUC to the AUC
    and therefore cannot be updated/altered when using KOB5 or any other transaction.
    Once the costs are settled to another object other than the AUC, those costs cannot be settled to the final asset. Creating Preliminary
    settlement rules to a receiver IO and changing the period or fiscal year will not “block” costs from settling whether the processing type is automatic, by period, partial capitalization or full settlement.
    I’ve been testing this out in our development client and need verification that this is the way that transaction KOB5 works with line item settlement or did I do something incorrect . 
    Your feedback is greatly appreciated.  Thank you in advance.

    Hi Zaid,
    Thank you for your response.  Assets are not my area so I’m not sure if I missed a transaction or step in the process.   I tested this out by doing the following steps:
    Created AUC Asset class with line item checked
    Assigned PM Order type as non-investment with no investment profile and created order number
    Created a main asset number 
    Created an AUC sub asset number to step 3
    Created settlement rule to sub asset number on order
    Posted costs to order
    Settled from order to AUC with transaction KO88
    Created distribution rules for asset with transaction AIAB
    Settled from sub asset to main asset number with transaction AIBU
    When I settled from the sub to the main asset number in step 9, I found I lost the line item detail.  Is there another configuration setting I need to make to allow me to see the line item detail when I use AIBU?
    Thank you,

Maybe you are looking for