Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

Similar Messages

(2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database

First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register now

Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers

Encryption failed because its identity could not be confirmed

Hello. I've been having this issue from time to time; I'm trying to connect to another computer which has both *Remote Management* and *Remote Login* activated. On this computer I got *Encrypt all network data (more secure)*, and for some reason after I try to connect to another computer (that has Remote Login activated) I keep getting this error:
Connection failed because its identity could not be confirmed. This could represent a security problem, or your SSH known_hosts file may be out of date.
Disable the "Encrypt all network data" security setting or update your SSH known_hosts file.
How would I update the SSH known_hosts file? And I thought all this was made automatically? I used to be able to do this before, but its not working lately.

Just found the answer:
http://support.apple.com/kb/TA27368
On the admin computer (Mac OS X client computer), choose Go to Folder from the Finder's Go menu.
Type in the path name to your home folder adding /.ssh to the end of the path. example:
/Users/username/.ssh where username is your short name.
Inside the .ssh folder, open the known_hosts file.
Locate the Servers IP and or its fully qualified Domain name and delete it and the associated characters.Example:
example.example.com,192.104.192.118 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAutfhNudfFzZ00dyrU5O7/Y1wYhkhVJTSlNLqFROuvkmsB39Y8/> q47cQzdFqRfxsAlirDQKWW2xfr8qAKormuz7fT7so1myuanG24IYPwWmnZdLa3MdQ2zrWDkw672TZUT PBErrZYetej+KnU500mOcvdHjsj0SyPkqVRdPAXs=
Note: These characters can wrap to several lines.
Save and close the file.
Message was edited by: Adrian Chen

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?

Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

While trying to re-install Mac OS X, appears the following screen: Install failed Mac OS X could not be installed on your computer The installer encountered an error that caused the installation to fail. Contact the software manufacture for assistance. C

While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.

You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

HT201304 I can't purchase any. I'm buying gems in-game. There always a message saying 'Your Purchase Could Not Be Completed.' What's the problem? I have $100.63 credits. I can't use them. I just change my name in my apple id. Can anyone help me?

Help me! I can't purchase any. I'm buying gems in-game. There always a message saying 'Your Purchase Could Not Be Completed.' What's the problem? I have $100.63 credits. I can't use them. I just change my name in my apple id. Can anyone help me?

It's still the same message. Your Purchase Could Not Be Completed. For Assistance, Contact iTunes support at www.apple.com/support/itunes/ww/.

I get this message when syncing "itunes can not back up the ipod because a session could not be started" any idea of the problem?

I get this message when syncing my Ipod touch "itunes can not back up the ipod because a session could not be started" any ideas?

Have you looked at the previous posts on the right side of this page under the heading "More Like This" with your same problem?

Preview failed because Adobe Muse could not make connection over HTTP.

Preview failed because Adobe Muse could not make connection over HTTP.
The most commons cause of this is fire wall software which prevents HTTP connections,
you mai need to change Fire wall settings to allow Adobe Muse to make connections??
Fire Wall is not problem!!
I asked this question a month ago, no one has answered.
does anyone know how to solve this problem?
I apologize for the bad English
thanks in advance

Mac or Windows? What software do you have installed that may be interfering with an application's ability to open an internet connection (i.e. virus checker, anti-malware utility, firewall, etc.).

Error: "install failed mac os x could not be installed on your computer"

Wanted to post an error I repeatedly got in case anyone else out there has the same issue. Went to do a snowleopard (10.6) upgrade and clean install on a mac pro (coming from 10.5). After about the "26 minutes left" mark I repeatedly got the following error:
"install failed mac os x could not be installed on your computer
the installer could not copy the necessary support files
click restart to restart your computer and try installing again"
i searched a bunch for this and could not find any definitive answers or help.
the log file was very vague, referring to errors writing package(s).
at first i thought it was a bad DVD drive as it was making a bunch of noise and taking a long time to boot. So i went and purchased a new DVD drive and successfully installed it. nope, same issue. then i pulled out all of my 3rd party RAM. nope. then i tried swapping the RAM into different configurations, nope.
after many many hours of various methods and re-partitioning, etc, just for the heck of it i replaced the harddrive, and it worked!
So, for those of you out there who get this error, try troubleshooting your hardware, try swapping your harddrive.

You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

Do I need to change any settings to connect my mac book pro to my tv?

Do I need to change any settings on my mac book pro to connect to my tv

Almost certainly, yes. Did you want to know which settings?
Exactly what settings you would need to change, where, and to what would depend on many factors, including at least the following:
* what model MBP you have (which will tell us the connector available),
* what version of Mac OS X it runs (which will tell us the settings available),
* what sort of TV you have (resolution, what connectors it offers, how they are switched, etc.),
* what connecting facilities you have (like wires or an AppleTV),
* how you want to use the TV (primary screen, secondary screen, mirror screen, sole screen),
* whether you want to play audio through the TV,
and even
* where the TV is located with respect to the MBP.
Simple case: New enough MBP to have HDMI output, running a recent OS X, TV new enough to have an available HDMI input, an HDMI cable on hand, using the TV as a secondary screen, and you don't care about how the screen positions relate or where the audio plays. You might be able to get away with default settings on the computer, but you'll still probably have to switch the TV to the HDMI input, and you'll have to drag windows onto the new screen.

W henever I try to open an Adobe file I get this message: Adobe Reader could not open ....because it is either not a supported file or because the file has been damaged. This is driving me nuts. Can I purchase somethine from Adobe that will allow me to op

Whenever I try to open an Adobe file I get this message:
Adobe Reader could not open ..... because it is either not
a supported file type or because the file has been damaged
(for example, it was sent as an e-mail attachment and wasn't
correctly decoded). This is driving me nuts !! Is there an Adobe
product that I can purchase that will make my Adobe Reader
work??? Right now it is useless to me and I have an important
download taht was sent as an Adobe download file and after
I downloaded the file Adobe Reader refuses to open it.
Please Help!!!!

I am having the same problems!!! How can a person get help from ADOBE? Or do I cancel and find a different program for converting.

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Adobe Reader could not open 'A9R7D1F.tmp'

Greetings~
I have seen others with this issue, but none of their solutions have been able to fix my problem.
When attempting to open a PDF document from a web site, I receive the following error:
"Adobe Reader could not open 'A9R7D1F.tmp' because it is either not a supported file type of because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
This is limited to a specific set of computers. Others within the organization function appropriately. As such, it is not a web server or network problem. Here are the specifics of the offending machine(s): Windows 7, Internet Explorer 8, Adobe Reader 9.3.2. Note that other machines with this same specs function appropriately. I have confirmed there are no differing group policies and all are within the same subnet.
Here is what I have tried. After each item, the browser was closed and/or system rebooted. Everyone of these tests resulted with the same error.
Deleted all history in IE (cookies, temporary files, history, etc.).
Uninstalll Reader, reboot, re-install Reader, reboot.
Saved the PDF to the local desktop and tried to open that way.
Installed an older version of Reader.
Ensured the following Reader settings are selected: Display PDF in Browser, Allow Fast Web View, Allow Speculative Downloading in the background (which match machines that are successful).
Ensure IE browser settings are configured to "Automatically" check for newer versions of stored pages.
Ensure PDF document is smaller than allowable disk space limit within IE.
Can anyone help me with this? I am out of ideas!
Thank you.

If you are generating files with anything before %PDF, these files are faulty. It's never been allowed, but Reader used to tolerate it for compatibility with an obscure Mac format.

PDF won't open on Mac with Adobe Reader Error message:Adobe Reader could not open

I have Adobe Reader 10.1.3 for Mac, (10.7.3) and am having problems opening pdfs. I get an error message: Adobe Reader could not open file name.pdf because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). The files are not from emails, but are from websites, government sites, professional organizations etc.) Help! Adobe is no help!

Manually download the files to your computer (right-click on the url). When the file is downloaded to your computer do you get the same message when you try to open in Reader through the File->Open menu? What about when you open the file in Mac's Preview application?

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Similar Messages

Maybe you are looking for