Preview Window lagging

When I try to preview a video in final cut express it is very laggy.

Alright so here is my situation. I have some DVDs with footage on that I need to edit in FCE. Thinkining it would be easy I just used handbreak to rip the DVDs which coverted it to m4v. Now that I realize it needs to be a different file type I dragged that into StreamClip and after a few minutes of converting it gave me: "Write Acess Eroor". What does that mean and where do I go from here? All I need to do is take the film off the DVDs and edit them in FCE.
Thanks so much in advance

Similar Messages

  • Preview Window really laggy in PE8?

    Hi
    I just can't get the Preview Window to keep up.
    I'm looking for a setting that will reduce the resolution of the image and lower the overhead (the preview quality is very high right now, It looks as good as the final output, it used to be pretty blurry, but it ran smooth) but I can't find a way to change it.
    The sound and everything is working and keeps pace but it's hard to edit when the preview window lags and then skips ahead 5 seconds completely skipping transitions etc or just stops at one frame and sit there to the end of the clip.
    The video I have loaded right now is only one and a half minutes long and the video is coming in as a 1600 by 900 avi file.
    I always worked at 1200 by 900 before but I'm trying to switch to wide screen.
    Everything else seems to be working ok.
    I recently did a clean install of my operating system (Windows 7), I have a very fast computer, i7 at 3Ghz and 8 Gigs of ram along with an ATI 5870 I gig video card, and everything else is running really well except for PE8 and PE9.
    Both of them are not running as well as they did in the past.  I can run Lord of the Rings Online at 250 fps, it shouldn't have trouble running a little 2D preview window.
    Both of my hard drives are defragged, and clean of any malware or junk.
    PE9 was so bad I went back to PE8 but it's only slightly better.
    When I do output the edited video it looks fine, and runs smoothly.
    Mike

    Hi
    I got it fixed, I removed both PE8 and PE9 using Revo Uninstaller.
    I cleaned everything out.
    I reinstalled PE9 in the default location and installed the update 9.0.1.
    I when I opened it up the old grainy Preview Window was back and it run normally again.
    I then discovered that somehow it had changed the Playback setting from Automatic to Highest, and that was the problem.
    I don't know how it got changed I had a lot of other things that were weird, for instance when I would open PE9 it wouldn't load all of the interface, just the preview window without the options on the right side of the screen, Organize, Edit etc.
    Anyway everything seems to be back to normal, and it no longer logs me in and tries to save all my files online either so I guess I'm all set.
    Now it's time to get back to work on my video.
    Mike

  • Preview window help

    When using the preview window my video really lags. Can you lower the preview resolution or do anything to make it run a little smoother?
    Thanks all.  

    http://help.adobe.com/en_US/premierepro/cs/using/WS40D098AD-37B2-4a0e-A46C-2C27F2CD0864.ht ml

  • What is this white line under my preview window?

    I accidentally hit T while editing and suddenly there were 2 preview windows in my preview window. I hit T again and it went back to 1 but now there's a white line under my preview screen. What is it? And did it do something to my image? How do I remove it? And what does T do in adobe premiere? And what were those 2 preview images in my preview window?
    Here's a picture:
    WHITE LINE:
    http://i.imgur.com/g9o9dDj.png
    2 PREVIEW IMAGES:
    http://i.imgur.com/nr1Akqe.png
    Please help me, I've worked too hard on this project to have it be ruined now.

    Dont think you have to worry about the white line. I think the program monitor is not updating correctly. Resizing the window should fix that.
    T is for Trimwindow.
    Half way down video tutorial on dynamic trimming.
    Adobe Premiere Pro Help | Trimming clips

  • Crystal report preview window freezes if I push any key on the keyboard

    our system is a pretty old one, and we are still using crystal report 7 and vc6(mfc6).
    It is a simple dialog based application with a button and a flex grid7.1 component on it.
    when the button is clicked, a crystal report preview window will be opened and become the active window.
    the problem is that, when i pushed a key on the keyboard ('a' for example) the whole application will freeze, and CPU Occupancy Rate is 100%.
    but if I switch the dialog to be current active window after a preview window opened, keyboard input won't make the application freeze.
    It seems that crystal report preview window don't know how to deal with the keyboard input.
    BTW:
    I use the methods below to open a preview window.
    PEOpenEngine
    PEOpenPrintJob
    PEPrintReport
    have anyone here met any similiar problems before?
    I really need your help.
    thanks in advance.
    Edited by: zhengli on May 26, 2010 4:36 AM

    Moved to Legacy Application Development SDKs forum.
    I have nothing for you, other than; consider upgrading - after all CR 7 shipped in 1998(!). I don't know what OS you are on, but I suspect what ever OS it is, it was not even in a concept stage of thought when CR 7 shipped. E.g.; this may be an OS issue more than anything else.
    BTW., print engine APIs were retired in version 9 of Crystal Reports. At this time, your best option is to upgrade to CR 2008 (12.0)and use .NET or Java. If you are using VB 6 or equivalent, you could still upgrade to CR XI r2 (11.5) and use the Report Designer Component (RDC). However, note that CR XI r2 will be out of support in June of this year. And CR XI R2 is the last version of CR to include the RDC.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Edited by: Ludek Uher on May 26, 2010 8:28 AM

  • Closing Report Preview window closes all parent windows

    I have a form 6.0 calling a report 6.0 with several user parameters using run_report_object in preview mode. After the finishing previewing, the user closes the report preview window. Then the preview window closes all the parent windows.
    Need help!
    1) The parameters are char, date and number types.
    2) I don't have a parameter form. I take out the high-light of the parameters on the parameter form and the parameter form title.
    3) I have several user parameters and without the parameter form i'm still able to pass the parameters from the Form.
    Thanks
    null

    report_other parameter can only take 255? characters.
    I use create parameter list and add_parameter instead.

  • Printing Crystal Reports without calling Adobe Acrobat preview window

    Post Author: akurilin
    CA Forum: General
    Hi, each time a click a Print icon in a Crystal report preview toolbar, it opens a dialog box which opens an Adobe Acrobat preview window. Is it possible to print a Crystal report without calling Adobe Acrobat window?
    Thanks in advance,
    Anatoly Kurilin

    Post Author: lakarne
    CA Forum: General
    I want to know if I useing Crystal Reports xi and want print without calling Adobe Acrobat preview window, how can I do it?

  • IMovie 11 projects no longer working, preview window is glitched or black, event library not playing imported vids

    I am having a lot of trouble with iMovie 11.  I bought a new MacBook Pro 15" for the sole purpose of editing surgical videos for work.  iMovie 11 was working great initially for me (taking full length surgical video - up to 2 hours) and editing these down to anywhere from 5 to 30 min videos highlighting crucial steps for the surgeries along with transitions, ken burns, etc  (with the plan of overlaying narrative voice-over later).  I had about 15 of these videos edited sitting in my Project Library and multiple imported videos (dvd to m4v via handbrake then imported via iMovie 11) in my Project Library.  Now none of my projects play in the preview window, it's either black or a weird glitchy picture (like messed up pic of my doc or desktop... really weird) and only about 2 of my imported videos play in the project library, otherwise they are just black when I roll over them.  My projects are still intact as far as edited clip lengths and transitions, but nothing plays, even in full screen mode.  I tried making a new project and the imported video shows in the event library but when I add it to a project it's black (but does play in full screen mode, but impossible to edit this way).  I think the audio is actually intact although i'm not positive because these videos don't have any audio (there's some baseline level that fluctuates on the audio bars). 
    I tried finalizing and exporting a project as an m4v (one that was a combination of two edited imported videos - one of the source imported vids working in the event library and the other not working) and the first half is all glitched up with no surgery video, but the second half is there with the transitions and everything (the half that is working in the event library).  This part does not show up when I am trying to edit the project. 
    fyi - I had deleted some of the videos from my event library to unclutter a little some time ago, the projects were still working after that.
    I can find all of my imported videos (in .mov format) that should be working in the event library when I look in the folder:
    users/me/movies/iMovie events
    If someone could please help me resolve this issue, I would really appreciate it.  I put a lot of work and time into these videos and it would be near impossible to start from scratch (which would probably be on some other movie editor like windows movie maker since my iMovie is not working properly even for new projects).  I'm hoping this is just some sort of glitch that can be fixed and my projects are still salvagable.  I can't remember if this started after I did a system software update or not.  This will be a huge dissapointment for me in the Apple platform if I have to scrap my projects because I had just switched over from the PC platform. 
    I even got Norton antivirus and internet security to make sure I don't have some sort of weird virus.
    I have a Feb 2011 15 in MacBook Pro 2.2 Ghz, 4 g RAM, 750 g HD, 1 g vid card.  iMovie ver 9.0.4.  Lion 10.7.2

    Did you by any chance upgrade your Mac OS from version 10.6 (Snow Leopard) to 10.7 (Lion) during the time you were working in iMovie on all these projects?
    If not, start by deleting the iMovie Preferences file.
    Go to the Desktop
    Hold down the Option key and choose the Go Menu > Library
    Go to Preferences > com.apple.iMovieApp.plist
    Move the .plist file to the trash and restart iMovie
    See if the Project files react any differently. Failing that try doing a Repair Disk Permissions:
    Restart the Mac, hold down the Option key continuously until 2 hard drive icons appear
    Choose the Recovery Volume as your startup disk and let it run until you see the Desktop
    Choose Disk Utility from the Recovery Menu
    Run Repair Disk Permissions in Disk Utility
    Reboot the Mac and when you see the Desktop appear launch iMovie
    See if the Project files are the same or different. Next step after this is to one at a time take the Project folders out of users/me/movies/imovie projects. Move one to the desktop and start iMovie. Try skimming the projects that acted up recently. Moving one project at a time might help isolate which project may be causing problems. You can also place project folders back in their original location after doing this testing and iMovie will recognize them on the next relaunch. It won't hurt anything.

  • In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

    In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
    These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

    Yea, and it's a pain to get to.  What was the rational for removing the print size button?   With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size.  Of all the buttons you could have taken away, why not fill screen?  I never use that.
    Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop.   The Brush preview window is  unchanged in CC but in CC2014 it's basically worthless.  If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

  • Topic area: Apple Mail.  Question:  How do I get the message preview window to display to the right of my list of email messages?

    Topic area: Apple Mail.  Question:  How do I get the message preview window to display to the right of my list of email messages? i.e. to preview whatever message is currently highlighted in the center window list of messages?

    At present there is no preference option available to move the preview
    pane to right side of the mail window.
    Best.

  • How do i get back my mail-Preview window?

    My mail preview windows has vanished, and it has been bothering me to work without it for quite some time.
    I have tried finding solutions on google, but none of them seem to be possible?
    (there is no dot to click on, and i can't just pull it out from somewhere)
    Can someone tell me what i seem to be doing wrong?
    - 2011 Macbook Air / OSX Lion

    Richard,
    Double Click or drag the bar that's located on the far right of the mail window.
    If your mail preferences is set to "Classic layout" then it's located at the bottom of the mail list window.
    Regards,
    Captfred

  • Why is the preview window for my timeline so pixilated?

    why is the image in my preview window for my timeline so pixilated? im using a mac pro 16gb ram/ 6 core / firepro d300

    thanks for your feedback!  This is my first week with premiere and its been a lot of fun, but im still learning my way around and the terminology, so i appreciate all feedback and correction. 
    What I'm seeing in the program monitor is a sharp image when it's paused and a pixilated image when it's playing.  I'm not sure how, or where i would make the adjustments.  Also,  I have been using lots of educational videos on youtube to learn my way around, but is there like a book or something that will teach me the basics?  I don't want to be asking basic stuff on here.  Thanks again

  • Problem with the preview window in Premiere Elements 10

    Hi guys,
    I have a question:
    I have a new PC (data follow) and Adobe Premiere Elements 10.
    My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
    PC:
    AMD FX-8350 Eight Core Processor 4 GHrz
    NVIDIA GeForce GTX 750 Ti
    Do you need even more?
    What I have already tried:
    - Adobe Premiere Elements 10 anew inst.
    - Graphics drivers update
    - Check DirectX
    - Windows Media Player and QuickTimePlayer anew Inst.
    Already to many thanks for your help!!!!!
    lg
    Börni

    borni123
    What computer operating system is your Premiere Elements 10 to run on?
    You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
    in the Announcement at the top of this forum. Copy for your convenience below.
    You gave a lot of details but did not include the computer operating system. This information may be the key whether
    the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
    is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
    a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
    specific for Premiere Elements 10 and the NVIDIA GeForce cards.
    Copy of Announcement at top of this forum....
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
    roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
    available to you.
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    Please update us on your progress,
    Thank you.
    ATR

  • I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

    I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

    The license allows YOU to install on a 2nd computer... it does not allow someone else to use your license
    Licenses and terms of use | Adobe
    You may also not purchase an Education version for someone, they must do that for themself... if they qualify
    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html
    I do not  know how it is done, but you MAY be able to buy her a regular subscription and pay with your credit card... just not the Education version that has strict requirements

  • How to close the scopes / preview window

    I guess I have the opposite problem that most people have (I did try to do a search on this one). I would like to close or disable the scopes/preview window. Is there anyway to do this?
    I am running 1 large monitor and would love to just have the main color interface fill the entire screen. (I have read that color is designed for 2 monitors.. but it's easier to fit one large (28") monitor on my desk rather than 2 smaller ones) In single display mode, I can minimize the scopes window, but I can't seem to maximize the main color window. If I do dual monitor mode, I can minimize the scopes window, but when I hit play, it pops up and jumps in front of my main window. I have a kona for my external monitor and I have an external scope.
    Is there anything I can do? Did Apple just not give us many ways to customize the interface (Can't re-size the main color window)? I am running color 1.0.4 on OS X 10.4.11 (on a G5), and have the ATI X800 XT.
    Thanks so much,
    Peter

    +Then the scopes screen jumps in front of my main grading window.+
    Don't know why this is happening to you. Under window set for a single display and restart Color. If your doing DVD/TV work the only monitor that going to be any help is a grading TV monitor. A second computer monitor would be a waste and useless.
    I have a two screen setup. I mainly do work for internet delivery. I have Color set up for single display. My main monitor (calibrated as close as I can get it) is better than my second monitor. And that's were I view my Quicktime videos. The second monitor is only used for programs tools/pallets. When I do something for TV I set up a second TV monitor.

Maybe you are looking for