Previous iWeb site is gone after upgrade.

I had made a site using the previous version of iWeb (in 10.4) but after I upgraded to 10.5, when I opened iWeb that site was not there. I do have it because I published it to a folder, but how can I get it back into iWeb so I can edit it? Do I have to make it all over again?
I don't see any way to "Open" a previous site.
Please help!

OK, So now is there any way to open that previously designed site using the new iWeb, since it's not listed in the pane on the left of iWeb?
I'd like to open that old site that I made so I can make changes and finish it.
Thanks!

Similar Messages

"Top Sites" capability GONE after upgrading to Safari 4.0.3

In a nutshell:
I've been running Safari 4.X June 09 with Top Sites becoming a key tool in everyday use, and a cool one at that. Top Sites worked on 15 August, did the minor rev upgrade from 4.02 to 4.03 on 16 August, and the Top Sites function is GONE on the 17th.
The rest of the story:
Upgraded to Safari 4.0.3 last night and to my dismay the TOP SITES function is now just GONE. No explanation, no warning, just "poof."
Read through the discussions, read through the support pages, took the immediate advice to reinstall...then tried the instructions for deleting select files under under com.apple.safari...et cetera...No Joy, 2 hours lost.
Read the discussions MORE CLOSELY and found this: http://support.apple.com/kb/HT3410
"Safari 4: Top Sites, Cover Flow features require compatible graphics card"
So Let me get this straight...I accept a minor rev upgrade, from 4.0.2 to 4.0.3, and LOSE functionality? Really, guys?
I lose the functionality, apparently, because the Intel GMA 950 is apparently not Quartz Extreme compatible.
Ok, then, riddle me this Batman: the support article above is dated June 2009. I've been running Safari 4.X since then with top sites working quite well under 4.0.2. My early adopted 2006 Mac Mini hasn't changed since it's manufacture.
What's going on? What am I missing? Anyone else seeing this?
G
P.S. From the Logs
Chipset Model: GMA 950
2009-06-11 16:59:26 -0600: Installed "Safari" (4.0)
2009-07-17 20:46:41 -0600: Installed "Safari" (4.0.2)
2009-08-16 22:44:21 -0600: Installed "Safari" (4.0.3)

Mikate,
Does your iMac have an Intel GMA 950 chipset? If not, then your comparison is not valid. If it does have the same chipset as my Mac Mini, then you may have eliminated a possibile cause. (same os + same chipset=reasonable assumption)
The central issues is still the loss of major functionality under a minor rev change.
What changed? The requirements for Top Sites to work? Then why did it work for me under 4.0.2? According to the article, Inel GMA 950 is not specifically named as supportable and therefore the function should not have worked at ALL when safari 4.0 was installed. NO Mac specific drivers from Intel at Intel's web site. Have NOT seen any under the apple support pages, but I could be missing them.
G

All bought titles and albums gone after upgrading I Tunes

Hi Guys,
unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
Can somebody please help me?
Thanks you very much...
Best regards - Greg

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

My iPhoto pictures are all gone after upgrade to Photos

Can anyone please help!!! All my pictures from iPhoto are all gone after upgraded to Photos tonight. Anyone know how I can recover them?

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library.
BUT you should always have a back up before doing this kind of work. Always.
Greeting from Co. Clare

Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
When the iPad finished resetting I got a popup message on the lock screen saying:
"This Accessory is Not Supported by iPad"
The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
The "TV Out" menu item is not there at all.
I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
This thread is talking about sort of similar issue (although it is about the VGA adapter):
https://discussions.apple.com/thread/2413622?start=0&tstart=0

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

Need Help Opening Previous iWeb Site

I recently got a new hard drive. I am trying to open my website "doman" file, but iWeb will not open it (...it only opens a new iweb site and asks me what template I want to use). How can I open my previous published site?

NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.

All apps and purchased upgrades gone after upgrading to iOS5.

Well, Apple, you've really Microsoft-ed this iOS5 upgrade.
After upgrading iTunes, then my iPad to iOS5, I lost all the apps and app data from the iPad.
I restored the apps by clicking on all of them in iTunes and Syncing iTunes and the iPad.
This probably did more harm than good, because now the original back up was overwritten with a bad back up.
After reading the forums, I thought I could restore my data and purchased application upgrades, however, nothing changed.
Can I get back to the original backup and selectively restore the application data?
I love the automatic back up feature, but, don't blast away previous back ups. Also, let us decide what to restore to the iPad.
Argh.

The same thing just happened to me and I was ticked!! All is well now though because this (http://support.apple.com/kb/HT2519) worked for me! YAYAYAY! Click the first "download previously purchased apps" and follow directions. It's annoying because you have to go back into the app store on your iPad and redownload every single one individually, but at least it works! I was not about to go repurchase them all. After this, I will backup from iPad into iTunes since they got lost in the iTunes update.

Complete library is gone after upgrade to 9.0.2

My complete library is gone after an upgrade to 9.0.2, however, the files are still on my external hardrive. Do I have to manually drop & drag each file to restore to iTunes? Is there an easier way to restore?
TIA,
Lynn

My complete library is gone after an upgrade to 9.0.2, however, the files are still on my external hardrive.
Let's try the following document first, Lynn. (No need to reinstall iTunes, though ... you can skip that step.)
[No content shows up in iTunes after updating|http://support.apple.com/kb/TS1967]

Battery life gone after "upgrading" to 4.3 (iPhone 3GS)

I've lost all battery life after upgrading last night to ios 4.3! I barely get 5-6 hours, whereas I always got a full day (probably two if i let it run down) before the upgrade. I can't believe this is a coincidence. How do I go back to 4.2? Or is there a cure for this?

OK, problem solved, with the help of Apple Support.
They suggested that I re-install the upgrade using Restore on iTunes. So I backed-up the iPhone, did a Restore to factory settings, and then restored all the apps, music etc from the back-up. The phone was fully charged 8 hours ago now, and has gone down to 80% with some occasional use .... this is typical for my 3GS. So: "Restore to Factory Settings" worked. Don't ask me why!

Faces gone after upgrades to Mavericks and iPhoto database.

After upgrading to Mavericks from Mountain Lion, the iPhoto Database had to be upgraded by iPhoto to work with Mavericks. It went thru the process and afterwards many (but not all) of my Faces were gone. The photos are still there...and they're still tagged with the appropriate Faces name, but they will not show up in Faces. The only way I can get them to show up there is to delete the Faces names that are already on the photo and re-enter the Faces from scratch. But since there are at least 1500 photos that are affected, there's got to be a better way! I've done each of the following to no avail:
1) Repaired permissions.
2) Rebuilt Thumbnails.
3) Repaired the Database
4) Rebuilt the Database
5) Restored the Database from Time Machine to pre-Mavericks. The database had to be converted by iPhoto like before. And the results are the same - lots and lots of Faces missing - though everything else appears to be there. The only thing I can see is that it's the same set of years where the Faces are missing (it's something like all Faces from 1942-1970 are missing - but the ones before and after that are there).
Anyone have any ideas? Thanks in advance.

Since you've tried all of the standard fixes there's only one left:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
If no change try rebuilding the thumbnails again.
OT

Import previous iweb site from the internet? No old iweb files

My mac crashed and I lost all the information I had stored in it, including the iweb files of the blog I created using Iweb. Is there a way to import my iweb blog into a new Iweb in the mac I purchased? The iweb site I created is still up, so I am wondering if I can import the entries from my old iweb blog into my new mac/iweb using RSS or some other mechanism to capture the text and pictures in my old iweb blog and transfer them to my new mac. I also use idisk, so when I log in to mobile me I see links to my old iweb blog under if I click on Idisk and then go to "site". Any ideas about how I can import my old iweb blog from the internet?
The iweb version I have in my new mac is Iweb 3.0.3 (501)

Jorge ~ Welcome to the Support Communities. Apple says:
"iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb. You can manually back up the Domain file, or use Backup to back it up.” (Source)
...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWeb_Backup_retrieve.html

Get Info panel metadata all gone after upgrade to Yosemite!

Shortly after upgrading to Yosemite I discovered that all the metadata I had typed into the Get Info panel for a multitude of image files has been wiped out! Need less to say I'm ****** off. What happened and is there any way to recover this info? On a related note I also discovered that the field where you type info now behaves like a tag entry field, where typing a comma creates separate snippets of text. Whose brilliant idea was that? Is there a preference that can be reset so the field will accept text normally? Thanks.

I have the same problem, and no I haven't moved it.. but it's back to the default WIKI after the upgrade..
It seems there's the data in there.. a good 7-8 gig's worth, so I'm not thinking that's the default/empty data.
There IS a
Config
Config.original
Actually.. I'm not sure about the exact wording cos I can't access the computer as Yosemite is hanging right now.. **** Yosemite, I'm never going there again...

Network utility gone after upgrade to Mavericks

Hello,
After upgrading my 1 year old Retina Macbook Pro from Mountain Lion to Mavericks my Network Utility app was removed after the successful upgrade.
Is this just an incident by me or was this intended to happen as function of this utility is put somewhere else or considered by Apple not to be necessary anymore.
Regards,
Rob

Apple moved it to /System/Library/CoreServices/Applications/.
(91926)

IPhoto library gone after upgrade to Tiger

My iPhoto library was empty after upgrading to Tiger. I am on my 4th digital camera, so you can imagine how many photos I can no longer find. What is worse, and I don't think there is anything worse, I can no longer see photos of my child who is deceased. I want my photos back!! Can anyone help. The "computer nerd" company that did our upgrade is of no help at all. They talk to me as if I knew anything about computers and I know nothing. Please help me.
Elizabeth,
Ray'sMom

Phil
Three separate issues then:
1. The files which are corrupt or a file format that Preview doesn't recognize
Some things to try:
Change the file suffix to .jpg (i.e lowercase) or .jpeg and see if that helps.
Download Graphic Coverter and try open them with it. Graphic Converter is a image editor, and frankly, if it won't open them, I doubt anything will.
2. "Unreadable Files: 1
The following could not be imported. (The file is in the iPhoto Library folder.)"?
iPhoto will not import files from the iPhoto Library Folder - it's a simple protection against duplication.
3. iPhoto fails to display any of these images at all.
Do you get a blank square in the iPhoto Window? What happens when you click on a pic to edit it in the iPhoto Window? Do you get a ? or a !
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. The most common cause of this is User Activity in the iPhoto Library Folder. Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
If you want to start over:
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

IWeb Site Just Gone! Can I import the HTML info???

Not sure how, but iWeb no longer shows my website in the organizer. I tried looking for the domain file and it's gone also. I know I was saving every 30 mins. Just gone. I do have the folder that I published too. When I open the index.html file the site loads like it should. But I can't do anything in iWeb. I really don't want the last 3 days of work to be a waste.
Please Help.

Did you happen to upgrade or create the site in iWeb '08 and then try to open from another drive or partition in '06? '06 does not open '08 domain files. That's the only explanation I can think of for the "disappearance."
If your site is till online, you may be able to "suck' the elemnts back:
http://www.sitesucker.us/home.html
Good luck-- Scott

Previous iWeb site is gone after upgrade.

Similar Messages

Maybe you are looking for