Price chnage at sales order level but not in billing

Hi
I want to maintain the price manually in sales order but donot want to allow user to change the price in billing. I understand it is controlled at condition type level but not at document level.
Need your advise as to how we an achieve it.
Regards,
Neeraj Srivastava

Hi Neeraj,
You can achieve this by following below setting:
Go to into the condition for which you want to maintain price manually.
put C in manual entry field.
Set check mark for Header cond., Item cond & Delete only. Remove check mark for Amount/percent & value. Save it.
Go to pricing procedure and mark this condition for manual entry and mandatory.
Only thing in this is you need to put this condition in sales order manually & maintain price for this condition before pressing "Enter". Once you press "Enter" it will go in gray mode.
Ramchandra

Similar Messages

Specific Price conditions at Sales Order level

Dear Gurus,
We have introduced some Pricing conditions and their calculations at Sales Order level and we have made it to appear at the Sales Order Output which is for Internal reference.
We dont want the Pricing conditions to be shown in Customer Invoice.
Kindly advise.
Regards,
RK

Create the new Document Pricing procedure of the Billing Type & don't assign the Document Pricing Procedure to the Sales Area / Document Pricing procedure / customer Pricing procedure.
Best Regards,
Ankur

Expected Price ED1 EDI2 Sales Order & Incompletion issues re: Delivery/Bill

Hi,
We are using ED1 and EDI2 conditions for expected price on the sales order to trigger incompletion. This works fine, and it's possible to use V.25 to release or manually adjust the pricing conditions to match.
However we have problems in the way it is working re: Header/Item - if say we have two lines, line10 EDI1/2 prices are ok, complete; line 20 EDI1/2 conditions also added but incorrect and therefore incomplete.
Now when user trys to create a Delivery - they can create a delivery for line 10 but the line 20 errors because it is incomplete. This at line level would be ok, if we could subsequently Bill this line, but doing this through VF01 errors because of message 'VF055 (VF)055 Pricing error in document'
The only way to clear it is to clear line 10 on the sales order, say V.25 which then allows Line 10 to also be Delivered and Billed.
The above is with incompletion status group 06 which should prevent Delivery & Billing. Alternatively we could use Incompletion status 02, which blocks Delivery but allows Billing.
However this is inconsistant with the EDI1/2 conditions - Delivery seems to be blocked at the Item Level, but Billing at Header Level.
Is there a solution? Ideally we want the either:-
i) Delivery to prevented if any line is incomplete for EDI1/2, or
ii) Billing to be prevented only if the line Billed on the Delivery is incomplete on the Sales Order, not any line.
Any advice appreciated.

Hi,
I suggest you check copy control (delivery->billing) at item level in tr. VTFL.
Do you use standard routine in 'copying requirements' ? If needed you can also create custom routine that would not raise error for your scenario.
Regards,
Dominik Modrzejewski

Price calculation at sales order level

Hello Gurus,
This is poultry industry scenario: Cutomer is ordering the quantity in numbers example the :material is : Live Birds: 500 EA order quantity but the price should be calculated in KG wise for the birds quantity in the sales order .How this can be done in price calculation, looking for your inputs
Thanks in advance
Regards
Venkat

Hi,
While creating the Material you have the option to enter the sales unit in the sales oganisation 1 view
Enter the Sales unit as KG and maintain the relation from EA to KG ( as 500 EA = 1KG)
Now maintain the condtion records for the Base price as KG
Now try to create the sales order with KG, automatically the Price will be calculated Per KG and displayed
Hope it is clear
Please check and revert
regards,
santosh

Customer Visible in Sales Order Screen.But not visible in the customer Web form in R12

Hi all,
I have created a customer of organization type using the customer API.I have also created a location and a customer account and account site as well
The created values are loaded into the HZ tables and are visible in the tables such as hz_parties, hz_party_sites, hz_party_sits and so on.
But the issue is that I cannot find the customer in the customer web form in the receivables.but at the same time it is visible in the sales order screen in the order management.
so please, someone help me resolve this issue.
Thanks and Regards,
Bhaskar.

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

Manual price change on Sales Order line

Hi everyone,
Say I have a product A and have entered this in the price list Product A = USD 100 per unit.
I create the order and process the order, do ship confirm, but at the time of creating the invoice, I want to change the price to 97. or 95 or whatever. This is not fixed and depends probably on various business factors not in anyone's control.
I tried to manually change the price on the sales order line, but it is not allowing me to change, saying 'no manual discounts available'. My questions are :
1. How can I manually change the price of a product at the time of invoicing?
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
3. At what level can the price be changed? at order booking or even after ship confirm?
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
5. Do I need to make this price change in the price list also?
Pls reply asap.
Thanks a lot in advance.
Sudhindra Desai

Hi Sudhindra,
Check out if this helps:
1. How can I manually change the price of a product at the time of invoicing?
You cannot change the price once invoicing is done or when the Order Line Status becomes 'Closed' . Any change at the order entry level can only be effected till the Order Line Status is in 'Entered' Stage.
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
We have defined a modifier for our business purpose where by we can manually change the Price at the order entry level. If you require I can send you the screen shots of the setups we have done. I would need your e-mail id for that.
3. At what level can the price be changed? at order booking or even after ship confirm?
Price can be changed till the order is in 'Entered Stage'. It cannot be changed once it is 'Booked'
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
I did'nt understand this question actually. I think the price change is done on an order to order basis, if it is done for a particular order I don't think so it would affect further orders. If i'm changing the price in my price list then surely it would affect future orders.
5. Do I need to make this price change in the price list also?
This depends on ur business situation. If the price change is permanent u can make the changes in the price list also. Our business situation demands a base price to be defined in the price list even though the price we enter at the order entry level is always different from what comes from the attached price list.
Hope this helps you.
Regards,
Anil Wadhwa

Cash discount calculation at invoice level not at sales order level

Dear Friends
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
where these setting incurred in this process. i have verifies all the routies, there is no such kind of logic to calculate in a particular palce.
treat this one as high priority and let me know.
Thanks
Raju.

Hi
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
Please check your Pricing Procedure, whetehr against your Cash Discount Condition Type, Requirement 24 or 23 is maintained? If it is maintained remove these requirements and save. Then try to run the transaction.
Regards,
Amitesh Anand

Route not determing automatically at sales order level for some sales order

Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
Venkat

Hi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB

Status not updated at sales order level though the billing is done.

HI,
This is related Third party sales, where i created order, billing but document status has been showing as BEING PROCESSED.
There are 3 line items, where one item status is showin as completed, and for other two line items status is being shown as BEING PROCESSED.
PLEASE LET ME KNOW THE REASONS.

Read the following OSS notes to understand the status related to third party orders?
1) Note 210500 - Billing status of a third-party item
2) Note 549818 - FAQ: billing status for third-party items in sales order
Regards,

Credit check at sales order level?

Dear experts
I want to set credit check at sale order level with following conditions
consider open deliveries for credit exposure
consider billing documents for creadit exposure
do not consider any open orders
Also if oldest items are open for more than 7days then block the sale order creation
e.g suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-. In this case system should block the new sale order created of value more than Rs.50000/-
plz suggest the configuration steps
regards
kailash

dear friend
For i am already having the same setting but still my scenario is not working. i will explain my scenario again
suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-.
In this case system should block the new sale order created of value more than Rs.50000/-
But with the said settings purpose is not getting solved.
my settings are;
In OVA8 ;
Update: 000015
Static check: TICK
Status: TICK
open deliveries: TICK
Plz suggest
kailash

SD Stock checkint at Sale order level

Dear Gurus
I would like to know that, instead of delivery stage i would like to give control at the time of material entry in sale order level. Whenever user enters a material code system should not allow unless stock is there.
regards
Prasad

Hi there,
Are you asking that in order entry if a material is not available, then the system should not allow to even enter the material?
May I know the reason for that?
Through customizing it is possible. But consider this scenario which you will surely come across in that case. Consider that you will code in such a way that material will have a block if stock is not available. Consider that on 13th Oct you will carry out stock inventory in your plant & find that 100 quantity is available. So you will remove the material block & allow order entry for that material. Consider that you have an order with quantity 150 logged in. Since there is no block on the material, user will be allowed to enter the material. Customer requires 150 but you have just 100. That means there is no sufficient stock available to fulfill your order. This will contradict your requirement. Right?
Unless the material is entered, system will not be able to carry availability check. Coz only then you will come to know what quantity the customer requires. Only then you will be able to confirm when the item will be available.
So what I feel is that your requirement may be feasible through customized user exists but it will surely have issues like above.
Regards,
Sivanand

Final price of the Sales Order calculation on payment term

Hi,
Out Business requirement as follows.
1) one ZNAP pricing condition will be maintained by the monthly wise by business for pricing. this is a statistical condition only checking at sales order level only. this condition will check with Final price of the Sales order.
Now the requirement is
1) based on payment term of the Sales Order. plus if its a credit payment if the its CASH payment. these deduction should be added to ZNAP condition, and same will calculate with Final price, while creating Sales order.
For Example:
ZANP condition maintained 1000 USD.
while creating the SO:
If the payment term of the customer: PT30, ( it means payment with be in 30 days of the bill creation date)
system should do the below calculations
1) Scenario
Sales Order: Final price :                                       1500 USD( maintained by the Sales User while creating the SO)
ZNAP price                      :                                    1000 USD
according payment term 30 days                            20 USD ( as per table maintenance for calculation of the payment term.)
Calcuation:                                                          1000+20= 1020 (approximate need to add as interest rate)
Then final it should display final price 1500-1020= 480 USD.
2) Scenario:
If the payment term Cash:
ZNAP                                                            : 1000 - 20= 980 ( approximately and deduct, from the condition due to cash payment its like discount)
calucalte"                                                       1500-980= 520 difference
this purely internal pricing calculation with final price...
pl let me know how to get this in the pricing. and payment could be 30 days, 45 days 60 days etc.
Thanks.

Hi M Sham,
I believe your requirement can not be met with Standard pricing and you will have to create Routines for getting this result.
From scenario I believe you will be doing below points:
You should Create Z-Table with Payment Term and respective rates against those payment Term.
You should create a statistical condition type(Ex. ZNP1) and create Calculation Type routine with Logic to get KOMK-ZTERM field and derive value from Z-Table and update XKWERT field.
Calculate addition of ZNAP and ZNP1 (With +ve or -ve Signs)
And then again make deduction of derived value from Finale Value.
Do let me know if I have misunderstood your question.
Regards,
MJ.

In Sales order plant is not allowing to change

Hi Guru's
In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
dnr

Hi friend,
I suppose you cannot change the plant at order level if the material is created to a particular plant.
As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
Regards

Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

Availability check at sales Order level

I am working in retail project and we have Cash sales, Rush order, Standard order scenario. All articles are created as Trading articles HAWA.
When we create a sales order with cash sales document type, Rush order the availability check happens at sales order level itself but if I use the OR document type the availability check happens at delivery document level not at sales order level
I want the availability check to be happening at sales order level so I have marked the availability in VOV6 for schedule category CP and CV.
I donu2019t have the stock for the material X and we have not created any purchase order for X material but system is giving the confirmed delivery date with OR document type. So I have marked the check without RTL in OVZ9. After this system shows the confirm delivery qty is 0.
I think if the availability check happens without replenishment lead time then only I can get the output as per my requirement
Can anyone guide me is it the right way to address this scenario

Hello,
Cash sales --> The detail configuration that has to be made for Cash sales are as follows:
1. Create a new order type ZBV by Copying the BV Standard Order and in the functionality of ZBV activate immediate delivery.
2. Create a new category ZBVN by copying item category BVN and check whether credit active unchecked or not in ZBVN.
3. Make all the neccessay setting for the item category determination for cash sale for which u configured.
After the delivery document is created in the background, billing document is generated wrt Order.
Rush order -
>
1. Create a new order type ZRO by Copying the RO Standard Order and in the functionality of ZBV activate immediate delivery.
2. Create a new category ZTAN by copying item category TAN and check whether credit active unchecked or not in ZTAN.
3. Make all the neccessay setting for the item category determination for Rush order which u configured.
Please remember here the goods has to be picked and then PGI has to be posted. Then only you can bill the Order.
And for standard order process, please refer the below link:
[Standard order scenario|http://help.sap.com/bp_blv1600/V5600/BBLibrary/Documentation/148_BB_ConfigGuide_EN_IN.doc]
Regards,
Sarthak

Price chnage at sales order level but not in billing

Similar Messages

Maybe you are looking for