Price from Contract should default in the PO according to delivery date

Hi Gurus,
The scenario is:
I am creating a PO w.r.t. a contract. Now, the material in the contract line item has two different prices in two different validity periods. For eg, the price from Jan to Mar31st is Rs.5.00/unit. Now, in the next validity period, i.e. from April1st to Dec, the price is Rs7.00 /unit.
Now, I am creating a PO on Mar20th. The delivery date is expected in April and the date of April7th is put up in the PO. But, the price Rs5.00/unit is defaulting from the contract, since I am creating the PO in the month of March. Well, I can go ahead and change the price in the PO, but
is there any way, that the price from the contract defaults according to the delivery date in the PO, Not according to the PO creation date?
Thanks,
Kumar

Hello Kumar,
Contract validity date is related to PO creation data and not the PO Delivery Date. So whenever you create a PO system will refer to the contract which is valid on that date and hence you can not have price from the contract which is valid according to GR delivery date in the PO.
Customization, user exit are always there to help as per requirement but that would not be the correct option.
Better create PO according to your delivery date requirement so that PO will consider only that contract which system should actually refer.
Gurus,
Please correct if I am wrong.
Thanks And Regards,
Krupesh Kothari.

Similar Messages

  • Cost center PR price from contract

    Hi
    my requirement is to get  Purchasing Request ((which is cost center PR acct cat:K)) price, from a relevant valid contract..
    even when i assign the contract as a source of supply system doesnt take the PR price from contract?
    Any suggestions
    Thx in advance

    Hi ,
    Please take care of the SAp note 311174
    Cause and prerequisites
    The transfer of data from the source of supply is not planned and only
    makes sense in some cases. In particular when you change the source of
    supply later the copied data must be changed again. However, at this
    time it is no longer clear whether the data was copied from the source
    of supply or was entered manually.
    For your requirement, I would like to suggest you to use the enhancement
    below to implement your own logic in purchase requisition:
    LMEKO002
    Enhance communication structure KOMP for price determination
    MEREQ001
    Customer's own data in purchase requisitions
    BR
    Nadia Orlandi

  • Adopt net price from contract  if po created with referance to contract

    Hi expertise,
    Can any body so kind to find a way for the below requirement of my client:
    When PO is created with reference to contract, the net price of PO should be adopted from the contract & user should not allowed to change the net price of that PO (but allowed to change the quantity).
    Your earlier answer should be highly appreciated.
    Regards,
    Sp sahu

    Hi,
    You should make use of two very helpful options in SAP.
    They are known as the EVO parameter and the EFB parameter. These control what the user can do when generating .
    You configure a combination of flags on each parameter and so control things like "can prices be changed", can the user ONLY create by referencing a document (contract or req etc.)
    They are configured in the following menu path on SPRO
    Materials management > Purchasing > Environment data > define default values for buyers.
    This is the EVO parameter it is well worth reading the help text on the config for this. It explains that you have to then add a parameter (EVO) to the userid (in the normal way that they maintain their userid , or via the config).
    The EVO parametr is quite useful but the EFB parameter is even better, this conttrols what the user can do.
    The menu path  for the EFB is
    Materials management > Purchasing > Authorisation management > Define function authorisations for buyers.
    This is the one that will help with your problem. It works like the EVO parameter and so you add the EVO parameter to the userid and give it the code that relates to one that you have configured (careful the system is case sensitive for these codes, so use upper case or numbers for the codes when you configure them)
    In the EFB config switch on or off the flags that you want (in your case switch OFF the enter conditions and it may help to use an appropriate field selection reference key that makes the fields display only.
    Then when you allocate this parameter to the userid the settings will apply.
    try them out in your play client, they are VERY useful, especially the EFB parameter.
    Steve B

  • Vendor from Contract not defaulting in Shopping Cart in SRM 5.2 Classic Scenrario

    We have the Classic Scenarios implemented for Indirect Procurement. There is only a one contract maintained for the Material group + Vendor combination on the ECC system. When creating a Shopping Cart the Vendor shows up under the "Source of Supply" section. Shouldn't this default into the Vendor field as there is only one contract maintained? Is there any configuration that can prevent the vendor from defaulting? Please advice.

    Hello,
      The MM PO price value is calurated as in INR only but it is still taking the conversion as it was earlier
    as the vendor currency is in GBR.NOw as it has changed to INR no conversion has to take place but
    it is still happening.
    If I need to debug, which programs I need to, because these are ITS templates where
    PO creation will happen at backend may be i think through RFC calls.
    Thank you for your inputs.
    Br,
    SAAK

  • Price from Contract to SC.

    Hello Experts,
    We are on classic scenario, and our products are non-valuated which dose not have accounting view in Material master in R/3. So i could not run report to get backend prices.
    Now, when i choose this product from Internal Goods/Services, Price field will be open for enter the value. What i want is, When user choose contract or Info record from Source of supply tab in Shopping cart, price should be updated from Contract or Info record in SC price field so that user do not need to enter price.
    Can anyone help me on this issue?
    Thanks in advance.
    Aakash.

    Hi,
    you can implement the following badi: BBP_DOC_CHANGE_BADI method SC_CHANGE (SE19). You can write your own logic to fill the price field based on your own requirements (including calls to RFC enabled function modules in ECC).
    Regards,
    Robin

  • Consignment PO to get Price from Contract

    Hi Gurus,
    Is it possible for me to create a Consignment PO where in the Price is taken from the Contract Instead of the Consignment Info Record?
    Thanks,
    Jograd

    hi,
    Yes its possible, this is because when you maintain conditions in the contract and then make the PO/release order  for it with the info update indicator, then system will create a new PIR document ie. Consignment info record and whenever the liability will be raised, will take the prices....
    Regards
    Priyanka.P

  • When i play an album the first one plays but a different track from itunes plays instaed of the one on album.upto date on version

    when i play an album the first one plays but a different track from itunes plays instead not the one on album.

    Sorry guys, I had the shuffle on. Doh..

  • What can I do when I get this message from my Time Machine?  The backup disk image "/Volumes/Data/Jeanne's iMac.sparsebundle" is already in use.

    What do I do when I get this message on my Time Machine?  "The backup disk image “/Volumes/Data/Jeanne’s iMac.sparsebundle” is already in use."

    See C12.
    Time Machine Troubleshooting

  • PO delivery date changed according to delivery date on the inbound delivery

    Hi!
    Initial PO date is changed according to the inbound delivery date when I create inbound delivery.
    For example, initial PO has order qty. 1000 and delivery date 8/10/07.
    And then I created inbound delivery for that PO with qty. 500 and changed delivery date to 8/5/07 on the inbodund delivery. Then when I check PO again, PO line item delivery date was changed to 8/5/07 which is
    inbound delivery date. I think remaining 500 should have the same
    delivery date originally assigned unless we change manually.
    If somebody have experience, please let me know.
    Thank you!

    Dear Wan Lee,
    I think you also need to check for your Configuration setting for confirmation:IMGMM> Purchasing-->Confirmation.
    Regards,
    w1n

  • IPhone 6 Plus Gold 64 bit on the Edge Plan and Delivery Date?

    After reading a ton of the posts, a lot of people are saying that they are receiving confirmations that their phones are shipping Friday.  I ordered mine 3am CST (that's how long it took the pages to load).  My screen said delivery by Friday the 19th but then my confirmation said Oct 7th.  Most people are saying they know it has been shipped to Fed Ex when they get charged for the phone in their bank/credit accounts.  But, I signed up for the Edge plan and there was not a charge, just what my monthly bill would be.  I just need to know what day I have to stay home from work to sign for the package.  My company likes at least a few days notice.  Can anyone from Verizon shed some light on my order, did it go through OK (status still says unknown), I did receive the original order confirmation email within an hour of ordering the phone at 3am.  I know you are being bombarded with the same question over and over but I am starting to get a little concerned with all the different answers to other people's posts.  If a Verizon Person can help me out I would be truly grateful!!! Thanks so much!
    Suezyg

        I understand your anticipation and concerns regarding your new phone and your order status Suezyg23451! Please visit this link http://vz.to/RWWFB and enter your order information for that latest status available.
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • When I save a webpage, the file name should default to the page title, as it does in IE. Why doesn't it, and how can I get that as default?

    The current default file name appears to be from the URL.

    So, we have to install an addon to get this basic bit of functionality back. I've just spent over an hour trying to work out what was wrong with some updated pages on my site - and the answer is, nothing at all. It's Mozilla's fault, like several other bits of crap that keep happening to me.
    WHY did Mozilla release this crap when either
    they hadn't finished testing it
    or they couldn't care less about their users
    Yeah, yeah, you're a not-for-profit and you're open source, so you're lovely. I'm sure you've got dozens of ways of making money from this.
    Go to hell, Mozilla, I'm using Chrome from now on.

  • HT4137 I have a new ipad and an old Iphone 3G I'm still using - Should I use the old Iphone to restore data to ipad or set up ipad as "new", which it is?

    I have a new IPad and I'm trying to set it up - I don't know whether I should set it up as "new" (which it is) or use my
    old IPhone 3G (which I still am using) to "restore" data to the Ipad - any suggestions?

    Try restore from iPhone first. If you don't like the restore, you can setup your iPad to Factory Default.
    Restore to Factory Default (setup as new):
    Settings>General>Reset>Erase all content and settings

  • Delivery date from the submitted quotation

    Is there any way to compare and get the report of Delivery date comparison(like price comparison) in sap

    Hi Pranav ,
    Please  use standard SAP report ME80AN (general analysis for quotations) here document category should be A ( it will came by default A= RFQ)
    Here enter your material, plant etc and execute
    it will show you the RFQ s for that material now click on change view it will show 3 options select 2nd one Del. Schedule
    You will get the list according to delivery date as per your requirement
    Edited by: redriver on Nov 30, 2011 2:59 PM

  • Default NET price reflected in to PO from contract

    Dear GURUS,
    i have one requirement as fallows,
    the net price should be reflected at the time of PO creation from contract when we create the PO wrt to the contract,
    please let me know the configuration for this in detail.
    rgds

    Hi lakshmi,
    No need to do any config settings to pick the Net price from contract to the PO.
    If you are creating the PO WRT contract system will always pick the contract net price only.
    Regards
    Karthick

  • How can I copy the price from a reference invoice

    Hi,
    How can I programmatically copy the price from a reference invoice to the orders which I am creating using FM SD_SALESDOCUMENT_CREATE.
    Regards,
    Tanmay

    Hi,
    Try using the BAPI BAPI_SALESDOCU_CREATEFROMDATA1.
    In that pass REFOBJECTTYPE
    REFOBJECTKEY
    REFDOCTYPE
    to create from an invoice..
    Thanks,
    Naren

Maybe you are looking for