Pricing condition distributed

Hi Experts,
I would like to create a new Fret condition at header level which should be distributed on quantity (and not on net value)
So i created a new condition type with indicator header condition activated and and groupe condition activated in V/06.
And on my pricing procedure, i tried several routines in field "Alternative formula for condition base value" but none of them distributed the condition on quantity.
So my questions are :
1) Do you know if there is a standard routine? Or should i ask for a development?
2) Do you have any other ideas to distribute my new condition on Quantity?
Thank you very much,
Louis

Hello,
In the Header condition, Use the Condition Category as F and calclation type as B (Quantity ).
Then atomatically it will distribute the Amount of Freight based on the Quantity.
please check this and revert if you need further details.
thanks,
santosh

Similar Messages

Pricing condition FRB1

Hi All,
I am using standard pricing condition FRB1 for standard PO .
Busienss requirement is to define FRB1 in document header condition and the same should be distributed to all the line items in PO document on prorata basis of each line item value.
But when I define FRB1 condition in header condition say 100 USD, its condition value is multiplying with nos. of line items. I mean I PO is having two line items. Than condition value becomes 200 USD automatically.
What business need is to distribute 100 USD for both line items on the basis of line item value. Example line item 1 is having value 1000 USD and 2 is having value 3000 USD. Than it should distribute 25 USD to line item one and 75 USD to line item 2 for inventorizing the freight cost in Material account.
Currently it is inventorizing 100 USD for both line items.
How can I achieve this?
Thanks
Sanjay

if the condition was entered at the header level i think it should not be. however, please check pricing scale config of FRB1. check wether it is value or quantity scale.

Header Pricing Condition -- Can I attach rotuine..

Hi,
I want to attach routine for the header pricing condition (instead of manual) to fetch the price from ztable then the price
has to be equally distribute to item level/
Is this possible? can i attach a rotuine to Header condition?
Laxman

Hi,
The price for this Header condition is stored in classification field of material master.
Example..
We created charactersitc called deductables,and
attached this characterstic to the class of material. finally we given value of 100 usd in the material master classification tab.
So when I attach a routine (say 602) to ZDED (header discount condition), it has to go to the material master and find this 100 usd and equally distribute to all line item.
My direct questions is
Is SAP header condition will work if I attach a routine (altenative calcualtion type)?
If yes, once i identify the value of 100 USD how to pass to header level condition rate?
Need advice

Header Pricing Condition (SD)

Hello,
We have a header pricing condition type both applicable to header and line items. When manually putting an amount on the header, it automatically distributes the amount on the line items proportionally.
When running in batch or IDoc via requirement routines (or any VOFM routines), how can I populate the header amount so that it will distribute the amount automatically also on the line items?
I normally do this on the line item level by modifying XKWERT on a requirement routine but I cannot get it to to work when the target is a header pricing condition.
Please help me if you have any ideas.
Thanks in advance,
John

which include? i think you forgot to include the name of the include

Value of Manual Pricing Condition is becoming zero while saving.

My clientu2019s pricing calculation requirement is complex. Here I am mentioning :-
We have one pricing condition type YPR4 which is header as well as item condition. Value will come only from condition record . So, we maintained access sequence in the configuration. Beside this we maintained u2018Manual entries u2018 in the configuration as u2018Not possible to process manuallyu2019. Condition record for this pricing condition type we maintain for line items.
We have another pricing condition type Y255 which is also Item condition as well as header condition. For this pricing condition value ( header level) can come from condition records if record exist , or , if condition record is not there or if user wants, user can enter value in header level of the sales order. For getting this functionality we maintained access sequence and u2018Manual Entryu2019 in the condition type configuration we have maintained as u2018No Limitationu2019.
In the line item level Y255 will come only if YPR4 is there for that item. The total value of the Y255 in the header will need to be distributed in the line items accordingly as per existence of YPR4 in the line item.
Issue:
Now the issue is that, when there no condition record for Y255 and when we are entering the value of Y255 manually in the header, the value of Y255 is becoming zero when we are moving from one screen to another screen in the same sales order , or when we are saving the sales order..
Can anybody suggest what we need to do so that manually entered value of Y255 remains in the sales order after moving to another screen or after saving the sales order ?

Hi ,
Please check the pricing routines funcationality which is assigned to both condition types.check the requirement and alt.cal. type routines of Y225 condition , on what basis condition record is updating manully entry as well as picking value from condition records.

SRM 7.0 pricing conditions mapping to the backend system

Experts,
I am new to SRM & working in SRM 7.0. I have a serious problem in distributing the pricing conditions.
I need to distribute/map the pricing conditions in SRM 7.0 to the backend ECC system. I need step by step procedure for the same. Plz help me.

Hi,
with the help of SDN, i have done the mapping part of pricing conditions as below.
field-symbols:
 <ls_be_item> type BBPS_CTR_ITEM,
 <ls_be_cond> type BBPBAPICONDCT,
 <ls_be_cond_bapi> type BBPBAPICONDIT.
loop at ct_be_items assigning <ls_be_item>.
 if <ls_be_cond>-COND_TYPE = '0100'.
 <ls_be_cond>-COND_TYPE = 'PB00'.
 elseif <ls_be_cond>-COND_TYPE = '01CT'.
 <ls_be_cond>-COND_TYPE = 'PBXX'.
 elseif <ls_be_cond>-COND_TYPE = '01RA'.
 <ls_be_cond>-COND_TYPE = 'RB00'.
 elseif <ls_be_cond>-COND_TYPE = '01RP'.
 <ls_be_cond>-COND_TYPE = '01RP'.
 ENDIF.
 if <ls_be_cond_bapi>-COND_TYPE = '0100'.
 <ls_be_cond_bapi>-COND_TYPE = 'PB00'.
 elseif <ls_be_cond_bapi>-COND_TYPE = '01CT'.
 <ls_be_cond_bapi>-COND_TYPE = 'PBXX'.
 elseif <ls_be_cond_bapi>-COND_TYPE = '01RA'.
 <ls_be_cond_bapi>-COND_TYPE = 'RB00'.
 elseif <ls_be_cond_bapi>-COND_TYPE = '01RP'.
 <ls_be_cond_bapi>-COND_TYPE = '01RP'.
 ENDIF.
endloop.
But the problem is, when i put the external break point in the above code, its not getting triggered. Can any plz tell me how to debug the code.

Free Goods with pricing condition (Urgent)

Hi MM Expert,
we have a probleme with free goods. because in PO item of free goods, there is no condition management (no Invoice entry) but we should manage some pricing condition for the item (spécifique condition relative to transport, ...).
so are the any way of managing the expenses annex condition(transport charge, customs clearance charges,) for the free goods in an item of Purchase Order ??
thank's in advance.
Said

Hi,
This is not possible to maintain the condition s for free goods because while creating the PO for free goods by selecting the free goods tad at item level, There is no Condition tab at Item detail .means you are not able to mainatin conditions.
If you want to maintain the conditions ,you have to treat as a Normal scenarios .
Regards
Sanjay L

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

Unable to display the pricing conditions for a product.

Hi All,
I have created a product with help of function modules.The problem is that i am able to populate the pricing conditions data into internal table,but the pricing conditions is not being displayed in the Masterdata->Products-> Maintain Products screen. Can anyone suggest me in this regards.Is there any function module to be used? or any other procedure to be followed for the pricing conditions to be dispalyed? If any sample code also please provide me.Please respond soon it is an Urgent Requirement. Points will be awarded for useful answers.
Thanks in Advance,
Shwetha.

Hi,
The pricing in SD and MM is a separate module like thing and is maintained for different products based on the Condition records.
The basic Pricing Procedure consists of Condition Types, Condition Records, Accesss Sequences and condition tables.
Generally with respect to all sales and purchase documents the pricing is maintained in KONV and KONP tables based on the different condition types.
reward points if useful
regards,
ANJI

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Change Pricing Condition for an item with CRM_ORDER_MAINTAIN

Hi community,
I try to change an existing condition with the function module crm_order_maintain.
Everything looks fine, no error no dump, but no success
The condition stays the same!
Can anybody find a solution for this?
Heres my report so far:
*& Report ZTEST_PRICING2
REPORT ztest_pricing2.
DATA: lt_guid TYPE crmt_object_guid_tab,
 lt_item TYPE crmt_object_guid_tab,
 lt_saved TYPE crmt_return_objects,
 lt_pridoc TYPE crmt_pric_cond_t,
 ls_pridoc TYPE crmt_pric_cond,
 lt_pricom TYPE crmt_pridoc_comt,
 ls_pricom TYPE crmt_pridoc_com,
 lt_header TYPE crmt_orderadm_h_comt,
 lt_input TYPE crmt_input_field_tab,
 ls_input TYPE crmt_input_field,
 ls_input_fn TYPE CRMT_INPUT_FIELD_NAMES,
 ls_cond_chg TYPE prct_cond_external_change,
 ls_cond TYPE PRCT_COND_DU,
 lt_pricing_i TYPE CRMT_PRICING_I_WRKT.
PARAMETERS: lv_head TYPE crmt_object_guid DEFAULT 'C4C61C4E35DDF306E10000000A024089'.
PARAMETERS: lv_item TYPE crmt_object_guid DEFAULT '09C71C4E35DDF306E10000000A024089'.
PARAMETERS: lv_kbetr TYPE prct_cond_rate DEFAULT '100'.
INSERT lv_head INTO TABLE lt_guid.
INSERT lv_item INTO TABLE lt_item.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
 it_header_guid = lt_guid
 it_item_guid = lt_item
* IV_MODE =
* IV_ONLY_SPEC_ITEMS =
* IT_REQUESTED_OBJECTS =
* IV_NO_AUTH_CHECK =
* IT_ITEM_USAGE_RANGE =
* IV_SUBITEM_DEPTH = -1
* IT_OBJECT_FILTER =
* IV_ONLY_CHANGED_OBJ = FALSE
* IV_STATUS_H_CHECK_RELEVANCE = FALSE
IMPORTING
 et_pridoc = lt_pridoc
 et_pricing_i = lt_pricing_i
* CHANGING
* CV_LOG_HANDLE =
EXCEPTIONS
 document_not_found = 1
 error_occurred = 2
 document_locked = 3
 no_change_authority = 4
 no_display_authority = 5
 no_change_allowed = 6
 OTHERS = 7.
IF sy-subrc <> 0 AND lt_pridoc IS NOT INITIAL.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE lt_pridoc INDEX 1 INTO ls_pridoc.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE ls_pridoc-pric_cond INTO ls_cond WITH KEY kschl = 'PB00'.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
ls_input-ref_guid = lv_head.
ls_input-ref_kind = 'A'.
ls_input-objectname = 'PRIDOC'.
ls_input_fn-fieldname = 'WAERS'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
ls_input_fn-fieldname = 'KBETR'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
INSERT ls_input INTO TABLE lt_input.
ls_pricom-ref_guid = lv_head.
ls_pricom-ref_kind = 'A'.
*ls_pricom-PRICING_TYPE = 'B'.
*ls_pricom-pricing_procedure = 'ZZMTA'.
ls_pricom-pric_cond[] = ls_pridoc-pric_cond[].
MOVE-CORRESPONDING ls_cond TO ls_cond_chg.
ls_cond_chg-waers = 'EUR'.
ls_cond_chg-kbetr = lv_kbetr.
INSERT ls_cond_chg INTO TABLE ls_pricom-cond_change.
APPEND ls_pricom TO lt_pricom.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
 it_pridoc = lt_pricom
CHANGING
* ct_orderadm_h = lt_header
 ct_input_fields = lt_input
EXCEPTIONS
 error_occurred = 1
 document_locked = 2
 no_change_allowed = 3
 no_authority = 4
 OTHERS = 5.
IF sy-subrc <> 0.
EXIT.
ENDIF.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
 it_objects_to_save = lt_guid
IMPORTING
 et_saved_objects = lt_saved
* ET_EXCEPTION =
* ET_OBJECTS_NOT_SAVED =
EXCEPTIONS
 document_not_saved = 1
 OTHERS = 2.
IF sy-subrc EQ 0.
COMMIT WORK AND WAIT.
ELSE.
ROLLBACK WORK.
ENDIF.
regards
Markus

Hello Jordi,
The example below is whereby i was trying to copy all the pricing condition on one document to another and deleting what's not present on the source document.
You can used this piece of code to adapt your requirement.
CALL FUNCTION 'ZCRC_FM_COPY_PRICE_COND_ALL'
 EXPORTING
id_object_guid_src = <fs_el_con_guid>
id_object_guid_dest = <fs_el_so_guid>
id_commit = abap_false
 EXCEPTIONS
not_allowed = 1
error_occured = 2
OTHERS = 3.
PERFORM f_recup_donnees USING id_object_guid_src
 id_object_guid_dest.
PERFORM f_modif_condition_prix USING id_object_guid_src
 id_object_guid_dest.
PERFORM f_header_copy_pricing using id_object_guid_src
 id_object_guid_dest.
FORM f_recup_donnees USING pd_object_guid_src TYPE crmt_object_guid
 pd_object_guid_dest TYPE crmt_object_guid.
DATA:
 lt_header_guid TYPE crmt_object_guid_tab.
INSERT pd_object_guid_src INTO TABLE lt_header_guid.
INSERT pd_object_guid_dest INTO TABLE lt_header_guid.
CLEAR: gt_orderadm_i, gt_doc_flow.
CALL FUNCTION 'CRM_ORDER_READ'
 EXPORTING
 it_header_guid = lt_header_guid
 IMPORTING
 et_doc_flow = gt_doc_flow
 et_orderadm_i = gt_orderadm_i
 EXCEPTIONS
 document_not_found = 1
 error_occurred = 2
 document_locked = 3
 no_change_authority = 4
 no_display_authority = 5
 no_change_allowed = 6
 OTHERS = 7.
IF sy-subrc NE 0.
 RAISE error_occured.
ENDIF.
" F_RECUP_DONNEES
FORM f_modif_condition_prix USING pd_guid_src TYPE crmt_object_guid
 pd_guid_dest TYPE crmt_object_guid.
DATA : ld_pd_handle_src TYPE prct_handle,
 ld_pd_handle_dest TYPE prct_handle,
 lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
 ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
 ls_komv_print_src LIKE LINE OF lt_komv_print_src,
 lt_cond_chg TYPE prct_cond_print_t,
 lt_cond_chg_insert TYPE prct_cond_print_t,
 ls_cond_chg TYPE prct_cond_print,
 ls_cond_chg_tmp TYPE prct_cond_print,
 ls_input_fields TYPE crmt_input_field,
 lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
 lt_item_ret TYPE prct_item_ret_t,
 lt_cond_ret TYPE prct_cond_print_t,
 ld_data_changed TYPE xfeld,
 gv_decimal TYPE usdefaults-dcpfm,
 ld_lines TYPE i,
 ld_ajout_cond TYPE abap_bool.
FIELD-SYMBOLS : <fs_orderadm_i_dest> TYPE crmt_orderadm_i_wrk,
<fs_orderadm_i_src> TYPE crmt_orderadm_i_wrk,
 <fs_cond_chg> TYPE prct_cond_print,
<fs_cond_chg_insert> TYPE prct_cond_print.
* Début Ajout CD1K904313-001.
DATA: ld_guid_src TYPE crmt_object_guid.
FIELD-SYMBOLS: <fs_doc_flow> TYPE crmt_doc_flow_wrk.
* Début Ajout CD1K904313-001.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
*Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
iv_header_guid = pd_guid_src
 IMPORTING
ev_pd_handle = ld_pd_handle_src
 EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
 iv_header_guid = pd_guid_dest
 IMPORTING
 ev_pd_handle = ld_pd_handle_dest
 EXCEPTIONS
 error_occurred = 1
 handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* A ne pas traiter les postes de type ZPDF
DELETE gt_orderadm_i WHERE itm_type = 'ZPDF'.
LOOP AT gt_orderadm_i ASSIGNING <fs_orderadm_i_dest> WHERE header = pd_guid_dest.
 REFRESH : lt_komv_print_src,
 lt_komv_print_dest,
lt_cond_chg,
lt_cond_chg_insert.
* Début Modif CD1K904313-001.
* Récupérer le guid de l'item liée au item destinataire.
 READ TABLE gt_doc_flow ASSIGNING <fs_doc_flow> WITH KEY objkey_b = <fs_orderadm_i_dest>-guid.
 CHECK sy-subrc EQ 0.
 ld_guid_src = <fs_doc_flow>-objkey_a.
* READ TABLE gt_orderadm_i ASSIGNING <fs_orderadm_i_src> WITH KEY header = pd_guid_src
* number_int = <fs_orderadm_i_dest>-number_int.
* Fin Modif CD1K904313-001.
* Récupérer les pricing document
 IF sy-subrc EQ 0.
* Document source
 CALL FUNCTION 'PRC_PD_ITEM_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_src
* iv_item_no = <fs_orderadm_i_src>-guid "Supression CD1K904313-001
 iv_item_no = ld_guid_src "Addition CD1K904313-001
 IMPORTING
 et_komv_print = lt_komv_print_src
 EXCEPTIONS
 non_existing_handle = 1
 non_existing_item = 2
 ipc_error = 3
 OTHERS = 4.
 ENDIF.
* Document destinataire
 CALL FUNCTION 'PRC_PD_ITEM_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 iv_item_no = <fs_orderadm_i_dest>-guid
 IMPORTING
et_komv_print = lt_komv_print_dest
 EXCEPTIONS
 non_existing_handle = 1
 non_existing_item = 2
 ipc_error = 3
 OTHERS = 4.
* Modification et Suppression des conditions de prix
 LOOP AT lt_komv_print_dest INTO ls_komv_print_dest .
 CLEAR: ls_cond_chg,
 ls_komv_print_src.
 MOVE-CORRESPONDING ls_komv_print_dest TO ls_cond_chg.
* Rechercher la condition sur le document source
 READ TABLE lt_komv_print_src INTO ls_komv_print_src WITH KEY kschl = ls_komv_print_dest-kschl
zaehk = ls_komv_print_dest-zaehk. "CD1K904313
 IF sy-subrc EQ 0.
 ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
 ls_cond_chg-kwert = ls_komv_print_src-kwert.
 ls_cond_chg-kinak = ls_komv_print_src-kinak.
 ELSEIF ls_cond_chg-kschl IS NOT INITIAL.
 CLEAR ls_cond_chg.
 CONTINUE.
 ENDIF.
* Format décimal
 CASE gv_decimal.
 WHEN space. "format N.NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 WHEN 'Y'. "format N NNN NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 ENDCASE.
 INSERT ls_cond_chg INTO TABLE lt_cond_chg.
 CLEAR ls_cond_chg.
 ENDLOOP.
* Ajout des conditions de prix
 LOOP AT lt_komv_print_src INTO ls_komv_print_src WHERE kschl IS NOT INITIAL.
 CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp, ld_ajout_cond.
* Vérifier la présence de la condition sur le document destinataire
 READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk. "CD1K904313.
 IF sy-subrc EQ 0.
 CLEAR: ls_cond_chg, ls_komv_print_dest.
 CONTINUE.
 ELSE.
 DESCRIBE TABLE lt_cond_chg LINES ld_lines.
 READ TABLE lt_cond_chg INTO ls_cond_chg_tmp INDEX ld_lines.
 IF sy-subrc EQ 0.
 ld_ajout_cond = abap_true.
 MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
 ls_cond_chg-knumv = ls_cond_chg_tmp-knumv.
 ls_cond_chg-kposn = ls_cond_chg_tmp-kposn.
 ls_cond_chg-stunr = ls_cond_chg_tmp-stunr + 10.
 ELSE.
 CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp.
 CONTINUE.
 ENDIF.
 ENDIF.
* Format décimal
 CASE gv_decimal.
 WHEN space. "format N.NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 WHEN 'Y'. "format N NNN NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 ENDCASE.
* Récupérer les nouvelles conditions qui seront ajouté au document destinataire
 IF ld_ajout_cond EQ abap_true.
 INSERT ls_cond_chg INTO TABLE lt_cond_chg_insert.
 ENDIF.
 INSERT ls_cond_chg INTO TABLE lt_cond_chg.
 CLEAR ls_cond_chg.
 ENDLOOP.
 CALL FUNCTION 'PRC_INT_ITEM_INPUT'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 iv_item_no = <fs_orderadm_i_dest>-guid
 it_cond_prt = lt_cond_chg
 iv_bal_log = bal_log
 iv_req_ret = abap_true
 iv_req_cond_prt = abap_true
 IMPORTING
 et_item_ret = lt_item_ret
 et_cond_prt = lt_cond_ret
 ev_data_changed = ld_data_changed
 EXCEPTIONS
 non_existing_handle = 1
 non_existing_item = 2
 ipc_error = 3.
 IF sy-subrc = 0.
* En cas d'ajout de nouvelles conditions de prix, appeler le MF PRC_INT_ITEM_INPUT
* avec les montants
 IF lt_cond_chg_insert IS NOT INITIAL.
 REFRESH lt_cond_chg[].
 lt_cond_chg[] = lt_cond_ret[].
 LOOP AT lt_cond_chg_insert ASSIGNING <fs_cond_chg_insert>.
 READ TABLE lt_cond_chg ASSIGNING <fs_cond_chg> WITH KEY kschl = <fs_cond_chg_insert>-kschl.
 IF sy-subrc EQ 0.
 <fs_cond_chg>-kwert = <fs_cond_chg_insert>-kwert.
 <fs_cond_chg>-kbetr_prt = <fs_cond_chg_insert>-kbetr_prt.
 ENDIF.
 ENDLOOP.
 REFRESH lt_cond_ret[].
 CALL FUNCTION 'PRC_INT_ITEM_INPUT'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 iv_item_no = <fs_orderadm_i_dest>-guid
 it_cond_prt = lt_cond_chg
 iv_bal_log = bal_log
 iv_req_ret = abap_true
 iv_req_cond_prt = abap_true
 IMPORTING
 et_item_ret = lt_item_ret
 et_cond_prt = lt_cond_ret
 ev_data_changed = ld_data_changed
 EXCEPTIONS
 non_existing_handle = 1
 non_existing_item = 2
 ipc_error = 3.
 ENDIF.
* Publish event afin de sauvegarder les conditions de prix
 CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
 EXPORTING
 iv_obj_name = 'PRIDOC'
 iv_guid_hi = pd_guid_dest
 iv_kind_hi = 'A'
 iv_event = 'SAVE'
 EXCEPTIONS
 OTHERS = 1.
* As no order_maintain will follow implicitly and therefore no
* exec times for the events will be set, call CRM_ORDER_MAINTAIN
* without any parameters
* Then the exec time 'end of document' will be set and with the
* group logic also all exec times before
* But at least one object is needed in input_fields
* --> use PRIDOC
 ls_input_fields-ref_guid = <fs_orderadm_i_dest>-guid.
 ls_input_fields-ref_kind = 'B'.
 ls_input_fields-objectname = 'PRIDOC'.
 INSERT ls_input_fields INTO TABLE lt_input_fields.
 CLEAR ls_input_fields.
 CALL FUNCTION 'CRM_ORDER_MAINTAIN'
 CHANGING
 ct_input_fields = lt_input_fields
 EXCEPTIONS
 error_occurred = 1
 document_locked = 2
 no_change_allowed = 3
 no_authority = 4
 OTHERS = 5.
 ENDIF.
ENDLOOP.
" F_MODIF_CONDITION_PRIX
*& Form F_LOCK_DOCUMENT
* Verrouillage d'un document
FORM f_lock_document USING pd_guid TYPE crmt_object_guid.
CONSTANTS : lc_orderadm_h TYPE crmt_object_name VALUE 'ORDERADM_H',
 lc_orderadm_i TYPE crmt_object_name VALUE 'ORDERADM_I'.
DATA: lv_process_mode TYPE crmt_mode,
 lv_order_initialized TYPE crmt_boolean,
 lv_process_type TYPE crmt_process_type,
 lv_already_locked TYPE abap_bool.
DATA: ls_admin_ui_status TYPE crmt_admin_ui_status,
 ls_item_usage_range TYPE crmt_item_usage_range.
DATA: lt_objects_to_read TYPE crmt_object_guid_tab,
 lt_requested_objects TYPE crmt_object_name_tab,
 lt_item_usage_range TYPE crmt_item_usage_range_tab,
 lt_locked_contract TYPE crmt_object_guid_tab.
INSERT pd_guid INTO TABLE lt_objects_to_read.
INSERT lc_orderadm_h INTO TABLE lt_requested_objects.
INSERT lc_orderadm_i INTO TABLE lt_requested_objects.
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '02'.
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
* LAM: Financing Options should be viewed in a separate screen:
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '05'. "Financing options
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
*-> read document in change mode
CALL FUNCTION 'CRM_ORDER_READ'
 EXPORTING
 it_header_guid = lt_objects_to_read
 iv_mode = 'B'
 it_requested_objects = lt_requested_objects
 it_item_usage_range = lt_item_usage_range
 EXCEPTIONS
 document_not_found = 1
 error_occurred = 2
 document_locked = 3
 no_change_authority = 4
 no_display_authority = 5
 OTHERS = 6.
PERFORM enqueue_order IN PROGRAM saplcrm_order_ow IF FOUND
 USING pd_guid
 abap_false
 abap_false
 abap_false
CHANGING sy-subrc
 lv_already_locked
 lt_locked_contract.
" F_LOCK_DOCUMENT
* Fin Ajout CD1K904074-001
FORM f_header_copy_pricing USING pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src TYPE prct_handle,
 ld_pd_handle_dest TYPE prct_handle,
 lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
 ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
 ls_komv_print_src LIKE LINE OF lt_komv_print_src,
 lt_cond_chg TYPE prct_cond_print_t,
 ls_cond_chg TYPE prct_cond_print,
 ls_input_fields TYPE crmt_input_field,
 lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
 lt_cond_ret TYPE prct_cond_print_t,
 ld_data_changed TYPE xfeld,
 gv_decimal TYPE usdefaults-dcpfm.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
 iv_header_guid = pd_guid_src
 IMPORTING
 ev_pd_handle = ld_pd_handle_src
 EXCEPTIONS
 error_occurred = 1
 handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
 iv_header_guid = pd_guid_dest
 IMPORTING
 ev_pd_handle = ld_pd_handle_dest
 EXCEPTIONS
 error_occurred = 1
 handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_src
 IMPORTING
 et_komv_print = lt_komv_print_src
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 OTHERS = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 IMPORTING
et_komv_print = lt_komv_print_dest
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 OTHERS = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
 CLEAR: ls_cond_chg,
 ls_komv_print_dest.
 MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
 READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
 IF sy-subrc EQ 0.
 IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
 ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
 ls_cond_chg-kwert = ls_komv_print_src-kwert.
 ls_cond_chg-kinak = ls_komv_print_src-kinak.
 CASE gv_decimal.
 WHEN space. "format N.NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 WHEN 'Y'. "format N NNN NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 ENDCASE.
 ENDIF.
 ENDIF.
 CLEAR ls_cond_chg-krech.
 INSERT ls_cond_chg INTO TABLE lt_cond_chg.
 CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 iv_bal_log = bal_log
 it_cond_prt = lt_cond_chg
 iv_req_ret = abap_true
 iv_req_cond_prt = abap_true
 IMPORTING
 et_cond_prt = lt_cond_ret
 ev_data_changed = ld_data_changed
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 not_allowed = 3
 OTHERS = 4.
CHECK sy-subrc EQ 0.
* * Publish event afin de sauvegarder les conditions de prix
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
 EXPORTING
 iv_obj_name = 'PRIDOC'
 iv_guid_hi = pd_guid_dest
 iv_kind_hi = 'A'
 iv_event = 'SAVE'
 EXCEPTIONS
 OTHERS = 1.
* As no order_maintain will follow implicitly and therefore no
* exec times for the events will be set, call CRM_ORDER_MAINTAIN
* without any parameters
* Then the exec time 'end of document' will be set and with the
* group logic also all exec times before
* But at least one object is needed in input_fields
* --> use PRIDOC
ls_input_fields-ref_guid = pd_guid_dest.
ls_input_fields-ref_kind = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
 CHANGING
 ct_input_fields = lt_input_fields
 EXCEPTIONS
 error_occurred = 1
 document_locked = 2
 no_change_allowed = 3
 no_authority = 4
 OTHERS = 5.
ENDFORM.
FORM f_header_copy_pricing USING pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src TYPE prct_handle,
 ld_pd_handle_dest TYPE prct_handle,
 lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
 ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
 ls_komv_print_src LIKE LINE OF lt_komv_print_src,
 lt_cond_chg TYPE prct_cond_print_t,
 ls_cond_chg TYPE prct_cond_print,
 ls_input_fields TYPE crmt_input_field,
 lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
 lt_cond_ret TYPE prct_cond_print_t,
 ld_data_changed TYPE xfeld,
 gv_decimal TYPE usdefaults-dcpfm.
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
 iv_header_guid = pd_guid_src
 IMPORTING
 ev_pd_handle = ld_pd_handle_src
 EXCEPTIONS
 error_occurred = 1
 handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
 EXPORTING
 iv_header_guid = pd_guid_dest
 IMPORTING
 ev_pd_handle = ld_pd_handle_dest
 EXCEPTIONS
 error_occurred = 1
 handle_determination_error = 2
 orgdata_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_src
 IMPORTING
 et_komv_print = lt_komv_print_src
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 OTHERS = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 IMPORTING
et_komv_print = lt_komv_print_dest
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 OTHERS = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
 CLEAR: ls_cond_chg,
 ls_komv_print_dest.
 MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
 READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
 IF sy-subrc EQ 0.
 IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
 ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
 ls_cond_chg-kwert = ls_komv_print_src-kwert.
 ls_cond_chg-kinak = ls_komv_print_src-kinak.
 CASE gv_decimal.
 WHEN space. "format N.NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 WHEN 'Y'. "format N NNN NNN,NN
 REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
 ENDCASE.
 ENDIF.
 ENDIF.
 CLEAR ls_cond_chg-krech.
 INSERT ls_cond_chg INTO TABLE lt_cond_chg.
 CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
 EXPORTING
 iv_pd_handle = ld_pd_handle_dest
 iv_bal_log = bal_log
 it_cond_prt = lt_cond_chg
 iv_req_ret = abap_true
 iv_req_cond_prt = abap_true
 IMPORTING
 et_cond_prt = lt_cond_ret
 ev_data_changed = ld_data_changed
 EXCEPTIONS
 non_existing_handle = 1
 ipc_error = 2
 not_allowed = 3
 OTHERS = 4.
CHECK sy-subrc EQ 0.
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
 EXPORTING
 iv_obj_name = 'PRIDOC'
 iv_guid_hi = pd_guid_dest
 iv_kind_hi = 'A'
 iv_event = 'SAVE'
 EXCEPTIONS
 OTHERS = 1.
ls_input_fields-ref_guid = pd_guid_dest.
ls_input_fields-ref_kind = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
 CHANGING
 ct_input_fields = lt_input_fields
 EXCEPTIONS
 error_occurred = 1
 document_locked = 2
 no_change_allowed = 3
 no_authority = 4
 OTHERS = 5.

Sales order: How to add pricing conditions at item level in BDC of VA01

Hello Experts,
Am writing BDC for sales order, in this process I need to add ITEM PRICING CONDITIONS, so, am selecting item and pressing the DOLLAR symbol button and am adding the conditions by pressing PLUS button in loop!! but am getting this erorr- Field KOMV-KMEIN (2) is not an input field!! when I execute it in we19-BACK GROUND only!! if I execute the same CODE IN we19-Fore ground, I dont have any issue!! I checked this SDN (field status in config), Google, but did not helped me!
Pls. let me know is there any other way to add conditions at item level in VA01 in BDC code?
THank you

Hi,
It is happening because the second row of the item level data screen is becoming display only. Please check whether In foreground mode you are pressing an extra enter to give data in the second row of the item level data after giving data in the first row and in BDC recording you have not recorded that 'Enter'.
Regards,
Gargi

How to update pricing condition in sales in batch in the evening

Gurus,
I have a situation where I am supposed to update the freight charge condition type ("ZFR9" in my organization) on a scaled basis, depending on how much the customer (ship-to) has ordered on the same date. Since this changes from time to time, I need to write a program that does the following in the background in the evenings.
1) Accumulate the wt of the material ordered by the same ship-to customer on the same delivery date.
2) Find the scaled freight rate from a central universal freight charge table.
3) Update the ZFR9 by this new frieght rate in all such sales order/line items that have the delivery date in question.
The problem with using BDC is that the condition type ZFR9 appears on different lines depending on presence or absence of other condition types.
Also I could not find any BAPI that does the update on a line item pricing condition.
I am on 4.6C.
Thanks for any help you can offer me.
Regards
Raju

Guys,
I am trying to make this work. I am able to add extra pricing conditions to sales order but I can not understand
- how to change the value of an existing condition type OR
- how to delete the condition type from the sales order line item
Here is the sample code that I am using to test this out (most of the information is hard coded so that I can focus on a particular record)
REFRESH RETURN.
    CLEAR   RETURN.
    REFRESH ORDER_ITEM_IN.
    CLEAR   ORDER_ITEM_IN.
    REFRESH ORDER_ITEM_INX.
    CLEAR   ORDER_ITEM_INX.
    REFRESH PARTNERCHANGES.
    CLEAR   PARTNERCHANGES.
    REFRESH CONDITIONS_IN.
    CLEAR   CONDITIONS_IN.
    REFRESH CONDITIONS_INX.
    CLEAR   CONDITIONS_INX.
    CLEAR SALESDOCUMENT.
    CLEAR ORDER_HEADER_INX.
Move screen accepted docnumber TO SALESDOCUMENT.
    MOVE P_VBELN       TO SALESDOCUMENT.
    ORDER_HEADER_INX-UPDATEFLAG = 'U'.
    APPEND ORDER_HEADER_INX.
Move screen accepted line item
    ORDER_ITEM_IN-ITM_NUMBER = P_POSNR.
    APPEND ORDER_ITEM_IN.
Move screen accepted line item
    ORDER_ITEM_INX-ITM_NUMBER = P_POSNR.
    ORDER_ITEM_INX-UPDATEFLAG = 'U'.
    APPEND ORDER_ITEM_INX.
Set the condition value
    CONDITIONS_IN-ITM_NUMBER      = P_POSNR.
    CONDITIONS_IN-COND_ST_NO      = '230'.
    CONDITIONS_IN-COND_COUNT      = '01'.
    CONDITIONS_IN-COND_TYPE       = 'ZSR3'.
    CONDITIONS_IN-COND_VALUE      = '333.00'.
    CONDITIONS_IN-CURRENCY        = 'USD'.
    CONDITIONS_IN-COND_UNIT       = 'LB'.
    CONDITIONS_IN-COND_P_UNT      = '100'.
    APPEND CONDITIONS_IN.
    CONDITIONS_INX-ITM_NUMBER     = P_POSNR.
    CONDITIONS_INX-COND_ST_NO     = '230'.
    CONDITIONS_INX-COND_COUNT     = '01'.
    CONDITIONS_INX-COND_TYPE      = 'ZSR3'.
    CONDITIONS_INX-UPDATEFLAG     = 'X'. " update
    CONDITIONS_INX-COND_VALUE     = 'X'. " update
    CONDITIONS_INX-CURRENCY       = ''.   " no update
    CONDITIONS_INX-COND_UNIT      = ''.   " no update
    CONDITIONS_INX-COND_P_UNT     = ''.   " no update
    APPEND CONDITIONS_INX.
    WRITE: / 'BAPI Called for', P_VBELN, P_POSNR .
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
      EXPORTING
        SALESDOCUMENT               = SALESDOCUMENT
ORDER_HEADER_IN             =
        ORDER_HEADER_INX            = ORDER_HEADER_INX
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
      TABLES
    RETURN                      = RETURN
   ORDER_ITEM_IN               = ORDER_ITEM_IN
   ORDER_ITEM_INX              = ORDER_ITEM_INX
PARTNERS                    =
PARTNERCHANGES              = PARTNERCHANGES
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
     CONDITIONS_IN               = CONDITIONS_IN
     CONDITIONS_INX              = CONDITIONS_INX
EXTENSIONIN                 =    .
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
                WAIT = 'X'.
IMPORTING
RETURN        =
    ELSE.
     WRITE: ' BAPI RETURN CODE = ', SY-SUBRC.
    ENDIF.

Purchase Order:Pricing condition report

Hello Experts,
Greetings.
I would like to know that is thair any such report avaible by executing particular pricing condition we may know how many purchase order have been created against that particualr condition.(i.e purchase order list - pricing condition wise)
Any help would be highly appriciated.
Best Rgds
Nitin

Hi
I dont think so there any report which you will give condition against Po
but we can check this in table or develop with help of ABAp consultant
in se16n t-code give table EKKO AND GET CONDITION number field KNUMV and pass this number
Now pass this into table KONV and find condition against PO
Regards
Kailas Ugale

Pricing condition distributed

Similar Messages

Maybe you are looking for