Pricing condition in sales order-issue

Experts,
i am facing a very strange issue, functional consultant
did some configuration ,such that when header of
sales order have condition type ,let say some 'ZXX',
this pricing conditon should be applicable to all
the schedule line with pricing condition as 'ZXX' where material in schedule line is let say 'ZPP',that mean
these should only be applicable for material type
'ZPP',we are facing strange issue , when scheule line no
10 is having material 'ZPP' ,then pricing conditon is
working fine('ZXX'),but if scheule line no 10 is having
material other than 'ZPP' and if scheule line no 20
is having material 'ZPP' ,then for scheule line no 20
pricing condition is not getting copied from header

goto tcode - vk13
note that [A]--sequence for plant /material
note that --sequence for plant /material/cafgroup
enter ur pricing condition type and
for the plant/material combination etc.. [A]-
may be in the access sequence ur consultant ave given it to a new sequence say plant/material/caf group .. --
like this
suppose say item 10 is for option [A] so access sequence is for this only ..cause material is now in plant/material
now say item 20 is for option so
material at line item 2 will fall under this sequence ..
cumulatively u need to get the total ..
now if the material is same in line 10 20 , u will have to fetch the values from both the tables in sequence and not one table will store the values ..
cause sequence pass for the material is now [A] and 
rememebr that per classification the values are stored in diff table like a906 ,, a90*..
in order to fetch that u need to get it from the tables of classification
and then cumulate it ..
this is important ..
regards,
VIjay.
Message was edited by: Vijay

Similar Messages

Manual Pricing Condition for sales order!!

Hi,
I have an issue, My requirement is I have to add a manual pricing condition in sales order header level. I have define the pricing condition for Freight Charges and that I have added to the pricing procedure that we have used for the transaction.
The problem is when Iam creating the order in the condition tab manully want to choose the condition type, but what I created condition type (Freight Charges) is not appearing in the view. Only exesting condition types only appearing in tha selection view. I am on CRM Stand alone
Pls anyone can advise where I miss the setting, I am new in CRM PRICING
Regards
VJ

Hello VJ,
You must consider that there is a setting "manual" in the pricing procedure customizing, indicating that the condition must be manually entered, and also a setting in condition type customizing regarding changes that can be made. In condition type customizing you should NOT have option D "Not possible to process manually". Have you checked condition type customizing?
Additionally please execute function module from note 867428 ( IPC_DET_CLEAR_CUST_BUFFER ).
This will ensure that all the customizing changes are immediately available ( otherwise you would need to wait until the automatic buffer refresh occurs, by default once per day
Best Regards
Luis Rivera

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

How to read pricing conditions on sales order

Hi
i need to retrive pricing conditions of sales order but before posting sales order
any user exit avialable ...?
also i hv found one user exit in that there is FM EXIT_SAPMV45A_003
But i am not able to read pricing conditions values
also no data is there in konv table coz sales order has yet not been post
so before sales order can i read the pricing conditions values ...
pls guide
if possiple pls provide example also
thanks
Taran

Hi
The problem is you can't use the KNUMV, because u make sure to get the princing active in the document at run time.
If you want to know the old data you can read the table KONV using field KNUMV, but here you can't know if some modification is done.
U can try to know the field-symbols:
DATA: XKOMV LIKE KOMV.
DATA: FIELDNAME(30) VALUE '(SAPMV45A)XKOMV[]'.
FIELD-SYMBOLS: <TKOMV> TYPE TABLE.
ASSIGN (FIELDNAME) TO <TKOMV>.
LOOP <TKOMV> INTO XKOMV.
ENDLOOP.
Max

Change header pricing condition in sales order

Hi,
I have an requirement in VA01 and VA02 to automatically edit one header pricing condition. The user can able to change the value of that condition type in header not in items . Does anyone know what user exit I can use for this requirement.
Thanks

Hi Sunil,
Plealse find below 2 methods to change header pricing conditions in sales order.
1.Goto SE38, give prog name as MV45AFZZ and in that write logic under USEREXIT_PRICING_PREPARE_TKOMK . (OR)
2) The same can be done by creating a Alt Calculation type routine through VOFM and writng the logic in the routine, which will then be assigned to the pricing procedure in the condition type which will automatically calculate the condition.
Try with the options mentioned above..
Regards,
KK

Pricing conditions in sales order.

Hi,
In my sales order pricing conditions, the Condition values are coming in change mode. so that the users can change the condition values.
I want to make it as disply mode. how can i do?
Regards,
jyothi.

Hi,
U can control the manual entry of pricing by following method:
Go to Condition type - In Changes which can be made screen, Select "D" ( Not possible to process manually).
However, please note u have to maintain condtion price for condition type through VK11.
Hope it solves ur issue.
Thanks
M G Shankar

Inserting Pricing condition in Sales order when saving the sales order

Dear ABAPers,
My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
How to do this.
Thanks & Regards,
Ashok.

Dear ABAPers,
I have Solved this Problem.
Thanks & Regards,
Ashok.

Users autorizations for pricing condition in sales order

HI all,
Can anyone tell me if there is any posibilities to control users autorization for certain pricing condition in a sales order? For example: User A can add/edit/display K007 but user B can only display K007 for a new sales order.
Thanks in advance
GeorgeR

Hi
Please check this link on WIKi
http://wiki.sdn.sap.com/wiki/display/ERPLO/UserexitforRestrictingUserModifyingConditiontypeinSales+Order
regards
Prashanth

Delete Pricing Condition IN Sales Order

Hello Forum,
Does anyone know how to delete a specific pricing condition in a Sales Order.
In a sales order for each line item there are multiple pricing conditions. I need to delete a specific price condition 'ZZZZ' for instance then how do I go about it?
This is what I have been able to find out so far.
1. Does NOT seem to be possible by BDC because there is no way to position the cursor on the particular condition record I require.
2. Although there is BAPI_SALESORDER_CHANGE, SAP via an OSS note specifies that this BAPI CANNOT be used to delete condition records.
3. None of the PRICING function modules seems to work for deletion. I did find out a function module PRICING_DELETE_LINE but this seems to rely on being called via SAP Standard function.
I have tried searching for some means to do this and I hope that someone on this forum can give me some help on the same.
Regards,

Hi Peter,
Your reference to OSS Note 593246 saved me from hitting my head to the wall, I had almost given up. Thanks a lot.
Here is the code, in case any one needs to add or change a condition type on the sales order.
REPORT ytest.
DATA:lt_conditions_in TYPE STANDARD TABLE OF bapicond,
     lt_conditions_inx TYPE STANDARD TABLE OF bapicondx,
     lt_return TYPE STANDARD TABLE OF bapiret2,
     ls_logic_switch TYPE bapisdls,
     ls_order_header_inx TYPE bapisdh1x,
     ls_conditions_in TYPE bapicond,
     ls_conditions_inx TYPE bapicondx.
ls_order_header_inx-updateflag = 'U'.
ls_logic_switch-cond_handl = 'X'.
ls_conditions_in-itm_number = '000010'.
ls_conditions_in-cond_type = 'PR00'.
ls_conditions_in-cond_value = '21.11'.
ls_conditions_in-currency = 'USD'.
APPEND ls_conditions_in TO lt_conditions_in.
ls_conditions_inx-itm_number = '000010'.
ls_conditions_inx-cond_type = 'PR00'.
ls_conditions_inx-updateflag = ' '.
ls_conditions_inx-cond_value = 'X'.
ls_conditions_inx-currency = 'X'.
APPEND ls_conditions_inx TO lt_conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
   salesdocument               = '0000053232'
ORDER_HEADER_IN             =
   order_header_inx            = ls_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
   logic_switch                = ls_logic_switch
TABLES
   return                      = lt_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
conditions_in               = lt_conditions_in
conditions_inx              = lt_conditions_inx
EXTENSIONIN                 =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait          = 'X'
      IMPORTING
       return         =
Regards
Amit Maole

Pricing conditions for sale order create BAPI

Hi guys and gals,
i am workin on a object where i would have to create a variant of VA01 screen with pricing details , item details , shipping details etc, visible in a single screen .
What i have understood so far is that i would have to use BAPI simulate to get the pricing conditions and ATP details to display to the user before he saves the order , the issue now is when is adding new pricing conditions or changing the existing conditions on my screen i would have to update the other conditions types based on his input and i also understand that some conditions r editable and some arn't and like in regular VA01 the user should be able to delete the pricing conditions also , which means i should taken into account all this when iam finally saving this order , please guide me further in this regards
Thanks in advance

Hai
Try with the following
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Thanks & regards
Sreenivasulu P

Copy Pricing Conditions from Sales Order to Billing

Hi,
Is there anyway to copy pricing conditions for item level from Sales Order to Billing Document at the time of creation of Billing Document.
Thanks

This question is not on topic for the Web Dynpro ABAP forum and has been locked.

Dectivate pricing condition for sales order not service order.

Hi,
We are on ECC6.0 and CRM5.0
I need to add new condition type to the existing pricing procedure.It should be activtaed only for service orders and not for sales order.I can achive this by adding new requirement in pricing procedure to limit this condition type based on order type.
Example: if KOMK-AUART eq ORDER_TYPE.
sy-subrc = 0.
But I don't want to do this,because I would need to change this requirement everytime I add new service order type.
Is there any field in Pricing structure KOMK bu using which we can achieve this. ?
Please suggest any other idea by which I can achieve this
Thanks
Dona

Currently ,we have one pricing procedures for both the scenarios...
We control if the perticular condition type to be active or not by writing a requirement which checks the order types.
This has been done this way because we built the pricing procedure in ECC and tranfer it to CRM.Also we donot have service orders in ECC.
any further alternatives guys..

Copy the pricing conditions from Sales Order to Delivery

Hi all,
I have to send the princing conditions from the delivery trough Idoc.
That's the reason why I need the princing conditions in the delivery. But I can't redetermine the pricing procedure in the delivery creation. I need to copy the pricing conditions from order to delivery.
Because if there is any manual modification of a condition in the sales order, If I redeterminate the pricing procedure in the delivery, I would lost the changes.
Anybody knows any User Exit or anyway to copy the pricing conditions from SO to Delivery?
Thanks in advance

I think pricing will not determine in delivery, if any shipmentchanges will copy to delivery, not standard pricing.
Logically, when you create delivery by that time your pricing need to finsh, no changes, so send pricing infor from order to customer, as its standard process in any client.

Authorisation for pricing conditions in sales order

Hi,
This could be a tipical requirement. he requirement is a sfollows:
Some users should not be allowed to enter / change some of the pricing conditions (manual) in the create / change mode of sales order (VA01/VA02). But they should be allowed to enter/change couple of other condtion types (manually).
The other requirement is to disable the functionality of adding new condtions type through dropdown in the item pricing condition screen in VA01/VA02. The pricing update button also should be in a disabled mode for some users.
Please advice me whether this can be achieved through some user exits or Basis authorisation?
Regards,
Sam

Hi,
Yes this can be done. If you are on EP4 you cna use the Badi PRICING_AUTHORITY_CHECK_UI to disallow users to use certain conditions.
If you are not on EP4 you can still use the exit userexit_field_modification in program LV69AFZZ to check against authorisation.
Choose the one that best suits your needs.
Regards,
Naveen

User exit to add header pricing condition in sales order

Hi experts,
I have an urgent requirement in VA01/VA02 to automatically add a header pricing condition and rate (Kanban charges) for a certain type of Sales order (Kanban Sales order). Does anyone know what user exit I can use for this requirement? Also, the additional header pricing condition should be included in the net value for the item.
Thanks!

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

Pricing condition in sales order-issue

Similar Messages

Maybe you are looking for