Pricing error: Mandatory condition ZPRI is missing

Hi,
When creating a credit memo request with reference to the original order we get the error: Pricing error: Mandatory condition ZPRI is missing.
Checking in Analysis we get following information:
"The condition is set as an automatic condition without access sequence. Stored condition formulas may deactivate the condition.
Example: In the case of the NRAB free goods condition the minimum amount is not reached. In this case the condition is deactivated using the base value calculation formula 029."
The condition type (statistical price) is setup not to be maintained manually and we want to keep it this way.
As no access sequence exist I do not know how to add a condition record.
I am also unable to trace any condition formulas.
I have checked other credit memo requests for this sales area and none of them have ZPRI in their pricing analysis.
Could anyone help me out?
Let me know if you need more information.
Thanks in advance!
Best regards,
Geert

Hi
Can you check the pricing procedure that is triggered in the Credit memo by going to Pricing analysis..
kinly check and maintain the same.
Regards
Damu

Similar Messages

Pricing error : Mandatory condition ZHPR is missing

The user is doing sales return.
In VF02, The prices are not updated and ended up with the error " Pricing error : Mandatory condition ZHPR is missing"
He used VK11 and updated the price and also tried in all key combination.
Still it is showing an error.
Please help.

Hi,
This is very common error, you can ref. through sdn.forum, however
1, First check the Pricing procedure for your condition ZHPR, also check if any requirements assigned to your billing doc.
2, Please check the analysis of the pricing in u201CVF02u201D, Just click on the condition u201CZHPRu201D and view the reason on right side.
I am sure you would find the fault.
Regards
DSR

Pricing error mandatory conditions TTE are missing

Daer all,
by creating an sales-order via transaction CRMD_BUS2000115 we get the following 2 errors after the input of one sales-position:
- Item 10     No Tte Input document found B7FA9743CEC6A21DE1000000C0A84D08
- Item 10     Pricing error: Mandatory condition 0TTE is missing
The oss-notes 519942 (and the depending ones) did not lead into a solution. The simulation TTE_SIMULATION of the pricing was successful.
Has anybody an idea especially, what appoints the relevant customizing settings ?
Thanks in advance for any feed-back.

Hi Michael
   CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
PLEASE CHECK
Business Partner Classification
*Assignment of tax types and groups
*Tax Calculation per country and Region.
*Tax numbers for NATURAL PERSON
Product Tax Classification.
*Assisgnment of tax types and Groups
*Tax Calculation per country and Region
Organisational Unit-Business place
Customizing of Tax Types and Tax Groups for BP and Products.
I hope this helps!!

Pricing error: Mandatory condition MWST is missing

Hi Every Body
While creating a sale Order i have enter two items when i double click on Meterial the following error appears.
Pricing error: Mandatory condition MWST is missing.I am using RVAA01 standard pricing procedure. what i have to do.
Thanks

Thanks for your respond. Actually i want to mantain the tax. when i enter the sale order and i and i click check item availbility Pricing error: Mandatory condition MWST is missing .
Then Logistics > sales and distribution>master data
>conditions>Change. there i select Taxes-->VAT/ATX1 click execute button. when i try to enter data in this the following error accor. i think upper error related with it. Tax code in procedure PKJTAX is invalid
please guide for mainting tax in sale order what should be the exact process.
Regards.
Rai Zeeshan

Pricing error : mandatory condition proo is missing

Hi,
here i am getting error,while i am saving the crm inquiry.kindly give me some inputs
error:pricing error : mandatory condition proo is missing
thanks
siva

Hi Siva,
you are getting this error because PR00 is a mandatory condition in the pricing procedure that you are using for your transaction type-Enquiry.
Check your pricing procedure,However if it is manual you can add it in the conditions tab of your inquiry directly. otherwise you can enter the price in either the product or the BP masterdata
Regards
Itty

Pricing error: Mandatory condition ZPR0 is missing

I have download the Pricing Conditions from ECC to CRM and I even checked the tables in CRM they are available.
When I raise the sales order I am getting the error saying that Pricing Mandatory Condition is missing
I found the following thing in Accesses Analysis
Root -> Condition_Determination --> TracerNo No price determination analysis available
only this i can find in Condition tab.
Can you guide me how to over come this problem?
It is very urgent.
Thanks in advance

Hi,
It was helpful, know i found the detail errors.
The Error is for the Condition Type ZPR0 i have the following fields they are
Sales org. of order
Plant
Customer group
Attribute Class Value for the Sales org. of order and Plant are nil
only Attribute class value for the customer group has read it.
Can you suggest me any idea ?
Thanks

Help.. Pricing error: Mandatory condition 0PR0 is missing

I've been having this warning message everytime i try to use a "
zero priced" item in CRM 4.0..
Part of its effect was, the "message number" for this particular warning message contains invalid characters (such as '###' or 'CH' etc..) which gives us a dump screen.
Could someone pls help or give an idea on how to resolve this issue?
Many Thanks! Ü

In addition..
This was how the material was configured.
COMMPR01
Status of condition record @5B@ No Errors
Scale available @00@ No scale available
Condition Type 0PR0 Price
Sales Organization Corp_DB Draft Beer Sales-Corporate
Distribution Channel 88 Draft Beer
Condition Rate 0.00
Condition currency PHP Philippine Peso
Condition Pricing Unit 1
Product unit PC Piece
Calculation Type C Quantity
Created by NGT THERESA VINA A. NG
Created on 10/09/2007
Valid From 10/09/2007
Valid To 12/31/9999
Again, Thank you so much!

Pricing Error : Mandatory Condition ZR00 is missing.

Hi Guys,
When i try to create a sales order i am coming across this error. From the forum i could find many answers such as to enter it manually or create a new condition type in VK11.
But i could already find the condition type exist for that particular material for the respective price list type. is the only solution here is to enter the condition manually or is there any other way i could solve this.
This is happening only for a particular order type.
Kindly advise.
Thanks & Regards,
Sanu

Hi,
The price list in the sales order is defaulted or you are changing it manually in sales order .
If you are changing it mnually system will not trigger automatic condition record.
You need to go to item details --> condition --> update pricing --> carry out new pricing option with out changing manual condition type
system will redetermine the price and for your condition type based on price list condition record will be picked up.
Hope this will help you to resolve your issue.
Please revert back for any query.
Regards,
Krishna O

Set "E" for V1801 Message: Pricing error: Mandatory condition ZR01 missing

Dear All,
I want to set below error message to appear as ERROR.
Right now this message appear as a GREEN Color message. Therefore user can save the sales order without pricing.
My requirement is to BLOCK the user from entering a sales order in to the system without pricing. (Not even a incomplete order)
Message
Pricing error: Mandatory condition ZR01 is missing
Message no. V1801
Please note I have done following configurations.
- I have set ZR01 condition as MANDATORY in my pricing procedure. - B'se it's the price for the material
- I have set "Manual Entry not possible" for this condition type - Price should always pick from VK11, User should not be able to enter manually.
If Price is not there, user should not be able to create a SO.
NOTE:
In the transaction OVAH, I cant see this message no to set as E.
even in SE91, I don't see a place to set the message type.
Is there any other way to set this message as "E" & to prevent user from entering a SO to the system without price???
Appreciate your help !

Dear Senya,
Your suggestion works really fine with me.
It didn't make that message an ERROR message type. But it prevents user saving any incomplete document, where in my case it's pricing. So user has to complete the pricing in order to save it.
Thanks a lot for the help !
All others, thanks a lot for your suggestions !!!
Edited by: Anupa Wijesinghe on Aug 10, 2009 6:41 AM

Pricing error: mandatory condition MWST missing

hai SAP experts,
while trying to create a sales order OR i am getting the error pricing error: mandatory condition MWST missing
please help to create the sales order.
thanks in advance
reddy

Hi Narayana
pricing error mandatory condition MWST is missing
there are two possible reasons
1) In your pricing procedure you have maintained MWST has ticked mandatory .
2) you have not maintained VK11 for this MWST condition type after ticking mandatory in your pricing procedure.
maintain VK11 for your MWST condition type and then create sales order with sales doc type OR.
another option is in MWST condition type details go to manual enteries can be changed there you can see manual entries feild as D change it C. .so that the time creation of sales order also if you get the same error you can enter manually. in emergency case
Reward points if useful
Regards
Srinath

Urgently need solution for Pricing Error: Mandatory condition type missing

Hello, All
I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
When I enter the product in the service order it gives me an error
"pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it cant find the condition record.
I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
Regards
Jacopo François

Hi,
Open u r transaction which u r getting the error, Double click on product u ll get the item level info, Select condition there u click on create icon, there u can define the condition.
OR
While creating a sold to party check whether u r entered a sales area data properly or not.
Hope it helps u
Gentila

Convert Pricing Error : Mandatory condition PR00 missing as a red error

HI GURUS,
May I know if I can make the error "Pricing error : Mandatory condition PR00 missing" as a no-go red error? We would not want to be able to save the sales order, then create the outbound delivery and only to reverse them after not being able to post the outbound delivery. Making it a no-go error will help us save time and effort if we commit mistakes in the sales order encoding.
Thanks a lot for your prompt reply.
Regrds,
Frances

Hi
Rahul
The error is becose of two reason
1. Check have u entered plant or not? If yes then
2. Mintain PR00 condition thr. Tcode VK11 and do the update pricing.
This two are the possibilities please check and try.
Hope this will help you.
Thx.

Pricing error:Mandatory condition xpi1(intercompany price) is missing

when i wanted to create Return order with ref to Invoice,its throwing an error Pricing error:Mandatory condition xpi1(intercompany price) is missing.Infact this condition type is there in Order,but its missing in Invoice,so not able to create Return order.What cud be the reason for the condition type missing in Invoice????

In T. Code V/06 go to this condiition type XPI1 and in control data 2 - check "Inter-company billing condition". This makes this condition to flow in the inter company invoice. Then you will be able to process the returns wrt to the invoice.
In the copy controls from Inv to Retruns order , T Code VTAF, at the item level, use pricing type D or G(G if you want to redetermine taxes)
Hope this helps
Regards
Sai

Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing

Hello All,
For Complaint in CRM change in default item category gives the captioned error. The error is there for all Sales Organisations.
Any suggestion how this error can be removed.
Thanks & Regards,
DP

Hi PePe,
Thanks for the response. Yes in the pricing procedure condition 0TTE is mandatory. We use this pricing procedure in some other transactions where tax is calculated.
When we add an item (let say item 160) the defaulted item category does not result in any error , but when we change it to a different item category which is not price relevant this error pops up for item 110. Moreover this error disappears with some dummy change or with an Update price on Conditions tab.
We in fact tried to trace the TTE for different instances and it fails with an error "TTE processing terminated" which eventually results with error "Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing" on the order.
Any suggestions what all needs to be checked and how this error can be diffused?
Regards,
DP

Pricing error - Mandatory conditions ZMWS DIFF are missing.

Hi All,
We have the error in package quotation Mandatory condition types (ZMWS) & (DIFF) is missing. We check randomly with some customers error is not appearing.(Error is occurring only for particularly ONE customer.)
Initially while entering the details in document (customer no., material, sales areau2026) before saving the document the error message is u201CInternal Error during Pricingu201D.
After saving the document error is occurring as mentioned below.
Error messages:
1. Pricing error: Mandatory condition MT Output Tax (ZMWS) is missing
2. Pricing error: Mandatory condition Rounding Off (DIFF) is missing.
Error message is clearing after some work around in the documents.
1. At header level, change the currency from CHF to EUR and then back to CHF.This will get rid of Round condition(DIFF).
2. And to get rid of out put tax, Ship to address (at header partner tab) by change the country from CH to DE, and changing Transportation zone and Post code country specific to DE. Close the address window and open it again. Change back the address to the original CH and close the window. Out put tax (ZMWS) error will go away.
Kindly any one can give your valuable inputs on this issue. Your help will highly appreciate.
Thanks in advance.
Regards
Bala

Hi Michael
   CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
PLEASE CHECK
Business Partner Classification
*Assignment of tax types and groups
*Tax Calculation per country and Region.
*Tax numbers for NATURAL PERSON
Product Tax Classification.
*Assisgnment of tax types and Groups
*Tax Calculation per country and Region
Organisational Unit-Business place
Customizing of Tax Types and Tax Groups for BP and Products.
I hope this helps!!

Pricing error: Mandatory condition ZPRI is missing

Similar Messages

Maybe you are looking for