Pricing Error: Variant Pricing

Hi Experts,
I have created KMAT material BOX. I have set all the pricing procedures and condition records correctly and when testing the material the pricing does come through correctly.
E.g.
Small = £50
Medium=£150
Large= £250
When putting in material Box and selecting small the price will come through correctly as £50 however I still get a
Price error u201CMandatory condition PR00 is missingu201D.
I donu2019t understand why, as the material BOX doesnu2019t not have a standard price and there can only be three options. So I tried creating a condition for PR00 that was 0.00 but that doesnu2019t work either
Please could you help?
M.Patel

Mr. Patel,
There will be a Standard Basic price for all the materials that are created. In your example you can maintain the standard price in PR00 as $50, and maintain the other prices as Variant Price in VA00.
Now the system will take the base price and depending on the other parameters (Size in you case), it can pick the Variant price(you need to maintain variant price as Mediun Size as $100 and Large as $200).
Regards
Vamsi Javaji.

Similar Messages

  • Error in pricing when doing sourcing in EBP 4.0

    Hello,
    We're experiencing random errors when doing sourcing in EBP 4.0. The shopping carts don't seem to have any similarities that could launch the error. There has been few cases when the same error has occured when user is creating a shopping cart.
    The problem occures when doing sourcing and the shopping cart is either being held or a PO is created. The error creates dump in ST22, "UNCAUGHT_EXCEPTION". This is somehow related to pricing and we have checked note 673372 and ran report BBP_CND_CUSTOMIZING_CHECK, all OK. IPC is running the same SP level as SRM, SP level 10.
    We have already created an OSS about this, but as this is completely random we haven't been able to reproduce the error and no solution has been found.
    Here's some data from ST22:
    Transaction......... "BBPSOCO01 "             
    Program............. "SAPLBBP_PDH"            
    Screen.............. "SAPLBBP_SOCO_UI_ITS 2000"
    The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT"
    The main program was "SAPLBBP_SOCO_UI_ITS ".                                                                               
    The termination occurred in line 69 of the source code of the (Include)   
    program "LBBP_PDHU08"                                                    
    of the source code of program "LBBP_PDHU08" (when calling the editor 690).
    000600   * get the messages from the application log    
    000610     TRY.                                         
    000620         CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'  
    000630           TABLES                                 
    000640             E_MESSAGES = LT_MESSAGES.            
    000650       CATCH CX_BBP_PD_ABORT.                     
    000660         REFRESH LT_MESSAGES.                     
    000670     ENDTRY.                                      
    000680                                                  
    >     RAISE EXCEPTION TYPE CX_BBP_PD_ABORT EXPORTING
    Thanks already in advance!
    -Jussi

    Hi
    Please refer to following SAP Notes:
    Note 860935 - pricing customizing exits are missing
    Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
    Also try to implement the latest IPC patches following the instructions from note 880749, then restart the VMC. It worked for us, after trying many things with no luck.
    Alternatively, try this as well. There must be some problem with VMC. Most probably java connection problem. Please execute program RSVMCRT_HEALTH_CHECK in SE38 transaction. You should see green for all 4 messages in the result. Please contact your basis consultant and refer notes 854170 (and 844817)
    <u>Other related OSS notes.</u>
    Note 1024374 - Unexpected pricing error for pricing irrelevant item
    Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
    Note 860935 - pricing customizing exits are missing
    Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
    Note 854170 - Activating the component "VM Container"
    Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
    Note 880749 - Patching of VMC based AP 7.00 engines
    Note 854170 - Activating the component "VM Container"
    Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
    Hope this will help.
    Please award points if helpful.
    Regards,
    -Atul

  • Vendor evaluation Pricing error: Field overflow

    Hi All,
    I scheduled monthly batch job for vendor evaluation, unfortunately i'm getting Pricing error: Field overflow with Message no. V1802
    Ofcourse pricing is one of the criteria for my vendor evaluation, my worry is that this evaluation is being carried out for all the vendors in more than 25 POrg's.
    Can you please guide me to resolve this issue.
    Thanks in advance
    Pavan

    Hi Arminda:
    yes i'm getting same error "price error: field overflow" even now
    Jürgen:
    yes i am running batch job for this vendor evaluation process with the variant, my problem is that " Batch job is getting cancelled due to few errors in vendor evaluation process called 'price error: field overflow'..
    can you please any one of you tell me how to get ride of this error.
    thanks
    Pavan

  • Variant Pricing Steps

    Hello,
    Variant pricing configuring steps
    Can anyone explain the steps in details for configuring this with explanation of class type.
    Full points will be awarded for good answers.
    Thanks,
    Anil Rajpal

    Hi
    STEP 1: CREATE CHARACTERISTICS: -   T.CODE: CT04
    Logistics , central functions , classification , characteristics , create,
    Go for value tab page
    save it .
    Go for the change mode and change the status to RELEASED
    Create another characteristic Namely called CAR_COLOUR with char value as white and black and follow the same above procedure.
    Step 2: Create Pricing Characteristic CT04
    SAVE IT
    Go for change mode and change the status to RELEASED AND SAVE IT
    STEP 3: CREATE CLASS CL02
    GO TO CHAR TAB PAGE
    Save it
    Again go for change mode and change the status to RELEASED
    Step 4: Create configurable material with material type kmat: mm01
    Go for mrp3 view
    Give strategy group =25 ( make to order ) and rest as usual.
    Step 5:
    Create sub material masters for finished products
    Like : white, black, normal, and disc.
    Step 6: create BILL OF MATERIAL (BOM)
    PRESS ENTER
    SELECT THE LINE ITEM AND GO OF EXTRAS, OBJECT DEPENDENCIES , EDITOR,
    SELECT SELECTION CONDITION
    PUT THE SYNTAX AS CHARACTERISTIC = u2018CHAR VALUEu2019
    CHECK THE SYSTAX ERROR (CRTL + F2)
    IF NO ERROR  THEN SAVE.
    STEP 7: CREATE CONFIGURATION PROFILE: CU41
    SELECT MATERIAL AND PRESS ENTER,
    SELECT THE LINE ITEM AND GOTO PROFILE DETAILS
    Select the user interface tab page and click the setting button
    Select the appropriate option as u like
    No we have to link the characteristics and values
    For the above , for the screen cu41, go for extras , object dependencies, editor
    SYNTAX  : $ SELF.PRICING CHARACTERISTIC = u2018CHAR.VALUEu2019 IF $SELF.CHARACTERISTIC = u2018CHAR.VALUEu2019
    Save it
    Come back and again save it
    Step 8:
    Place the variant condition in the pricing procedure
    Procedure zvaa01
    Create condition record vk11
    Save it
    Now entire configuration was done for variant configuration
    N0w create a sales order
    Va01
    Item category: TAC
    Billing relevance : (A) : delivery related billing.
    thanks
    Kuntla

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

  • Free Goods Pricing Error

    Dear SAP Gurus,
    I have configurde the Free Goods as Exclusive and accordingly kept the condition records. When I am creating Sales Order, I have given the first line item as 1482 and when I entered
    , the second line item automaticaly vame with item category TANN. Everything is fine up to this. I have kept price in VK11 for the material 1482 and 1483 is the free material.
    At the time of creating Sales Order, it giving the error as "Pricing error: Mandatory Condition ZPR1 is missing"
    I could not find out any solution for this. Please help in finding the solution for this.
    Thanks,
    Jans

    Hi Jans
    Your free goods configuration is something like buy 10 pens and get one pencil free
    Free goods are picked by R100 condition type with requirement 55 and aternate base value formula 28 in the pricing procedure
    Free goods are represented with item category TANN with pricing as B in VOV7 which measns 100 % discount
    This means the price of the pencil is to be maintained as condition record in VK11 for the condition type  ZPR1 (in your case) which will be picked by the system and nullifies it with 100 % discount
    This is missing from your end (this is my guess only)
    Without knowing the price of the second material 1483 how the system will give 100 % discount for it
    Soln is
    Maintain the condition record for the condition type  ZPR1 in VK11 for the free material 1483
    Hope this may help you
    Regards
    Raja

  • BOS problem in Sales Order (Pricing error)

    Hello every one,
    In my project i am getting scenerio of BOS- Bill of services. Now in that when i am creating sales order i m puting material and everything. Now at item level in am selecting "SERVICE" tab. When i am putting service there i am getting one pricing error that is "Conditions for service price determination incomplete". This is scenerio of bill of services. Kindly help me in this.
    Regards
    Abhishek

    Hi,
    Have you maintained the item level pricing?
    regards,
    raja

  • FREE OF CHARGE DELIVERY pricing error

    Hi SAP SD Gurus
    I am krishna new to this forum also new to SAP SD
    I have dought about free of charge delivery subsequent process.
    Can anybody please explain about the difference between those also what are the item category and scheduling cat for both.
    i created free of charge delivery but it is showing pricing error .where I have done mistake please explain?
    Regards,
    KRISHNA
    Edited by: kris_hna on Sep 19, 2010 2:14 PM

    Hi Krishna,
    When you wantto send some Promotional Materials or Sample materials ( which do not have any commercial value), we use Order Type FD (Free-of charge Delivery) in standard SAP.
    Order Type FD does not require any reference document.
    But, suppose we had already sent 10 pieces of material to the Customer out of which let say 2 pieces are damaged and customer has returned back it to you.
    Now, you have two options, either to issue a credit memo for the 2 pieces or you need to send fresh 2 units to the customer again.
    If you want to send fresh 2 units (which we call replacement) instead of giving him a Credit memo then we process with Order Type SDF (Subsequent Free-of-charge Delivery).
    Order Type SDF always requires a reference document. It is created with ref to the Return order.
    In both the above case (FD & SDF), Pricing is not applicable.
    Ensure that Item category is KLN in the Sales order and in the Item category details, "Pricing" check box should be blank.
    Regards
    Pradyumna

  • FD - Free of Charge Delivery and Pricing Error

    Hello Gurus,
    I want to make a Free of Charge Delivery.
    In VA01 I chose FD.
    Prior to doing that I have checked the following:
    - Item Category = KLN
    - Schedule Line Category = CP
    In KLN, Pricing tab is left blank
    So why when I want to create a Free of Charge Delivery I get the following message of error:
    "No pricing procedure could be determined"
    Why does the system react like this when no pricing procedure for this item category has been triggered or checked?
    Regards
    Chris

    Hi there,
    Many thanks, I have done all this however it still doesn't work.
    This is what I think I have to do:
    I am using the standard SAP pricing condition RVAA01 where the main condition type is PR00 + document pricing procedure set to "A" which is Stantard.
    Now, I understand how the PP works with regards to its domain of activity (Sales Area + documents types etc...)
    But I want to be able for the same Sold to Party 100277 to order normally using this pricing procedure + condition type PR00 as well as getting Free Goods.
    1- Does it mean that I can still keep the same pricing procedure and add a condition type such as R100 or NRAB in VK11?
    2- Given this pricing procedure is set to be "A" = Standard does it mean that whatever Free Goods condition type I may enter such as R100 or NRAB, the system is not going to accept them?
    3- Shall I need to re-create a whole pricing procedure for Free Good set to "C" for free? In that case what happens when I want to create a normal sales order in VA01 using OR? Which procedure is SAP going to select? A or C
    Regards
    Chris

  • Pricing Error - Billing doc. not generated

    Hi All,
    As there was a pricing error in Scheduling agreement the billing document could not be generated.
    Current Status :-
    SA(Scheduling agreement) Created.
    DO(Delivery ) Created
    PGI done.             Stock removed from the system     "Shipment Start"   ON
    Invoice can not be generated , in VF01 
    Pricing Error - YBR0 missing.
    What should be done ? Please help in this issue.
    Regards,
    Nikhil
    Message was edited by:
            Nikhil Pavagadhi

    Hi,
    I think this is something related to Shipment costs calculation. First of all you need to complere the Shipment and proceed for VI01 for Shipment Cost Calculation. You need to maintain condition record for YBR0 and then create Invoice. Hope this will work for you. Please let us know for further problems.
    Regards
    SD
    Message was edited by:
            Samier Danish

  • Pricing ERROR in SALES ORDER

    HI Guys,
      I am Using BAPI BUS2032 to migrate all the Sales Order from Legacy to SAP through LSMW.
       When I process the Idocs I get Error. Processing Terminated. Pricing Error.
    (KOMP-FXMSG = 801). The status is 51.
       But the Pricing Procedure is maintained in OVKK for the corresponding Sales Organisation combination and the record is maintained in VK11 too.
        I have also checked the A900 table where the material also exists.
        Can you sort me out what the problem is. Client is very specific in doing things through LSMW.
    Regards,
    Jack.

    Hi Jack!
    Did u get any solution to it? Because even I am facing similar problem while updating a sales order through BAPI - BAPI_SALESORDER_CHANGE.

  • Pricing Error in Sales Order - How to Maintain...

    I am newbie in SD and having issue, I have a sales order where I enter material and get "Pricing error: Mandatory condition PB00 is missing". Now I know this condition is set for manual entry if it is not found via procedure. But where do I maintain this manual entry, I have checked everywhere and cannot find where I can manually enter or edit the PB00 condition at the item order level?

    GaryGrewal ,
    In SD we use PR00 Condition type and not PB00. For PR00 you maintain datas in various combinations. Customer/ Materila or Material or Price list catgeory/ currency/material. This condition can be either kept manual or maintained as manadatory.
    Can you explain us why you are using PB00 - Gross- Price Only if you have some special  scenario...
    You rename PB00 to ZPB0 and include in the pricing procedure.
    This codition type does not have access sequence so you enter data manually during sales processing.
    Which means moment you create sales order by entering sold to party, po no, material and the qty. Then Double click Item details --> Choose Condition tab.  OR Choose the line item and then Click GoTo --> Item --> Conditions
    In Condition Type column enter "ZPB0"
    In Amount Column enter the value.
    That's it check the value. click save
    Please visit
    [www.sap-img.com ] Choose sales and Distribution  and go through the concepts i hope it will help you understand the basic principle and the process
    Regards
    Sathya
    Edited by: Sathya Pavan Yedavalli venkata on May 5, 2009 9:41 AM

  • Variant pricing in Sales order and Purchase Order for same Config material.

    Hi,
    I am stuck to a point wherein the varaint pricing is working either in Saler Order or in Purchase Order.
    The issue is that the Variant Condition Characteristics 'VARCONDMM' has MMCOM and VKOND in additional tab and in the multiple selection active (arrow) I have maintained SDCOM and VKOND.
    SO the variant pricing is active at the time of PO creation when 'VARCONDMM' is used and not at the time of SO creation.
    So I created  Variant Condition Characteristics 'VARCONDSD' has SDCOM and VKOND in additional tab and in the multiple selection active (arrow) I have maintained MMCOM and VKOND. and changed the dependencies accordingly for other characteristics.
    Then the variant pricing is active at the time of SO creation when 'VARCONDSD' is used and not at the time of PO creation.
    Any positive/quick inputs are highly appreciated.
    Regards,
    Abhilash

    Hi,
    did you check the code in dependency editor of the dependencies..? do they match between your previous system and new one?
    Regards,
    Raghu.

  • Pricing error: Exchange rate conversion Message no. V1803

    Hi,
    I am getting an error in the pricing procedure
    Pricing error: Mandatory condition XXXX is missing
    Message no. V1801
    Pricing error: Exchange rate conversion
    Message no. V1803
    where as the exchange rate is maintained.
    Please guide me

    hi
    Pricing error: Mandatory condition XXXX is missing
    Message no. V1801
    this error comes for pricing procedure , check the pricing procedure your mandatory condition not maintain the condition records , i  think it is for basic price, please maintain the condition records at vk11,
    Pricing error: Exchange rate conversion
    Message no. V1803
    this error comes for exchange maintain at img-general settings-currencies-enter exchange rates .
    here you will maintain the exchange rates, please fallow the above path,

  • Pricing error: Mandatory condition ZPRI is missing

    Hi,
    When creating a credit memo request with reference to the original order we get the error: Pricing error: Mandatory condition ZPRI is missing.
    Checking in Analysis we get following information:
    "The condition is set as an automatic condition without access sequence. Stored condition formulas may deactivate the condition.
    Example: In the case of the NRAB free goods condition the minimum amount is not reached. In this case the condition is deactivated using the base value calculation formula 029."
    The condition type (statistical price) is setup not to be maintained manually and we want to keep it this way.
    As no access sequence exist I do not know how to add a condition record.
    I am also unable to trace any condition formulas.
    I have checked other credit memo requests for this sales area and none of them have ZPRI in their pricing analysis.
    Could anyone help me out?
    Let me know if you need more information.
    Thanks in advance!
    Best regards,
    Geert

    Hi
    Can you check the pricing procedure that is triggered in the Credit memo by going  to Pricing analysis..
    kinly check and maintain the same.
    Regards
    Damu

Maybe you are looking for

  • I FORGOT MY SKYPE NAME AND PASSWORD

    I FORGOT MY SKYPE NAME AND PASSWORD

  • Reading and Writting to sharedd variable is so slow

    I am using shred vairable to make a connection between 2 VI's. when writting to the variable at a VI, it take much time(5 seconds) in order to respon to the value chane in the second VI. I am using LabVIEW 8.6 my operating system is WINDOWS VISTA, PR

  • Creating Private Inner Classes in Separate Files

    I sometimes find myself wanting to use private inner classes to do things, but then moving the classes to separate files and giving them package access just because I don't like having single large files. Is there a way to create private inner classe

  • Use case for describing a web service

    Dear all, I have a fundamental question for describing a web service. An analyst will first write (1) a use case for describing the web service and (2) wsdl and xsd files for describing the web service. As a developer, I would say that artifact (2) i

  • Contractor idoc inbound processing

    Hi, Cabn anyone please explain me how to process inbound idoc for purchasing contractor? thanks, raghav