Pricing error with condition type HI02

Hi Friends,
I have problem in pricing procedure for customer hierarchy condition type HI02. I have created the condition node i.e.6222 and assigned customer 1500 and i also maintained the condition record for the same and also put in the pricing procedure as well. Now while i am creating sales order the condition type HI02 is not coming automatically rather i am able to put the same manually. I want the system should pick the condition type HI02 automatically. Please suggest me IMG setting which i sould maintain for customer hierarchy pricing.
Thanks in advance,
Bharat B

Dear Barath
You are right
HI02 is a item condition type only used for customer hierarchy discounts and the access sequence for the same is HI02 with condition table 065  that is customer hierarchy/material and the same is positioned in V/07 in the access sequence details in seven consecutive  steps (the same condition table in all the seven steps) but the field in each table differing
The field in table 065 which is positioned in no 1 is HIENR 01
The field in table 065 which is positioned in no 2 is HIENR 02
The field in table 065 which is positioned in no 3 is HIENR 03
and the most important thing here is exclusive indicator ticked in all the steps exept the seventh step
That means if at hierarchy level 1 system finds a record then it stops searching
I have a feeling that your access sequence alignmemt must be wrong somewhere and check for exclusive indicator marking
HI01 is a item condition type only used for customer hierarchy discounts and the access sequence for the same is HI01 with condition table 064  that is customer hierarchy and the same is positioned in V/07 in the access sequence details in seven consecutive steps (the same condition table in all the seven steps) but the field in each table differing
The field in table 064 which is positioned in no 1 is HIENR 01
The field in table 064 which is positioned in no 2 is HIENR 02
The field in table 064 which is positioned in no 3 is HIENR 03
and the most important thing here is exclusive indicator ticked in all the steps exept the last step
That means if at hierarchy level 1 system finds a record then it stops searching
I have a feeling that your access sequence alignmemt must be wrong somewhere and check for exclusive indicator marking
Moreover importantly if there is condition type in a PP then if a condition record is maintained if the same is not picked up in sales order then analysis has to give some hint and what is the hint you are getting
Regards
raja

Similar Messages

  • Urgently need solution for Pricing Error: Mandatory condition type missing

    Hello, All
    I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
    When I enter the product in the service order it gives me an error
    "pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it can’t find the condition record.  
    I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
    Regards
    Jacopo François

    Hi,
    Open u r transaction which u r getting the error, Double click on product u ll get the item level info,   Select condition there u click on create icon, there u can define the condition.
                     OR
    While creating a sold to party check whether u  r entered a sales area data properly or not.
    Hope it helps u
    Gentila

  • Pricing Table with Condition Types

    Hi Team,
    I am searching for a table i had used sometime back containing Pricing Procedure with the Condition tyeps used in each of the procedures giving a clear view.
    Does anyone know of that T table?
    Thanks .
    Waiting for an early response..
    Regards,
    Suman

    Thanks anyways but these are the basic table .
    I am asking for a T table which can give me the procedures in my system with the condition types used in those procedures.
    Suman

  • V-41 tcode error :Table 304 is not defined for use with condition type PR00

    Hi All,
    I am trying to create a BDC using the transaction V-41. 
    The first screen has fields:
    ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
    But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the  values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
    Then an error message  is displayed:
    Table 304 is not defined for use with condition type PR00
    This behaviour is not allowing me to use the BDC feature.
    Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
    Can anything be done via customizing?
    Regards,
    Namita.

    Dear ILHAN ,
    Well the problem you are facing is having the following solution:
    Table 304 is not defined for use with condition type PR00
    Message no. VK024
    Diagnosis
    The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
    Procedure
    Úse F4 help to choose a valid condition type.
    If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
    In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
    I hope this helps.
    It has worked for me.
    I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
    Please award points if you find it useful.
    Regards,
    Rakesh

  • Pricing error: Mandatory condition ZPRI is missing

    Hi,
    When creating a credit memo request with reference to the original order we get the error: Pricing error: Mandatory condition ZPRI is missing.
    Checking in Analysis we get following information:
    "The condition is set as an automatic condition without access sequence. Stored condition formulas may deactivate the condition.
    Example: In the case of the NRAB free goods condition the minimum amount is not reached. In this case the condition is deactivated using the base value calculation formula 029."
    The condition type (statistical price) is setup not to be maintained manually and we want to keep it this way.
    As no access sequence exist I do not know how to add a condition record.
    I am also unable to trace any condition formulas.
    I have checked other credit memo requests for this sales area and none of them have ZPRI in their pricing analysis.
    Could anyone help me out?
    Let me know if you need more information.
    Thanks in advance!
    Best regards,
    Geert

    Hi
    Can you check the pricing procedure that is triggered in the Credit memo by going  to Pricing analysis..
    kinly check and maintain the same.
    Regards
    Damu

  • Set "E" for V1801 Message: Pricing error: Mandatory condition ZR01 missing

    Dear All,
    I want to set below error message to appear as ERROR.
    Right now this message appear as a GREEN Color message. Therefore user can save the sales order without pricing.
    My requirement is to BLOCK the user from entering a sales order in to the system without pricing. (Not even a incomplete order)
    Message
    Pricing error: Mandatory condition ZR01 is missing
    Message no. V1801
    Please note I have done following configurations.
    - I have set ZR01 condition as MANDATORY in my pricing procedure. - B'se it's the price for the material
    - I have set "Manual Entry not possible" for this condition type - Price should always pick from VK11, User should not be able to enter manually.
    If Price is not there, user should not be able to create a SO.
    NOTE:
    In the transaction OVAH, I cant see this message no to set as E.
    even in SE91, I don't see a place to set the message type.
    Is there any other way to set this message as "E" & to prevent user from entering a SO to the system without price???
    Appreciate your help !

    Dear Senya,
    Your suggestion works really fine with me.
    It didn't make that message an ERROR message  type. But it prevents user saving any incomplete document, where in my case it's pricing. So user has to complete the pricing in order to save it.
    Thanks a lot for the help !
    All others, thanks a lot for your suggestions !!!
    Edited by: Anupa Wijesinghe on Aug 10, 2009 6:41 AM

  • Pricing error:Mandatory condition xpi1(intercompany price) is missing

    when i wanted to create Return order with ref to Invoice,its throwing an error Pricing error:Mandatory condition xpi1(intercompany price) is missing.Infact this condition type is there in Order,but its missing in Invoice,so not able to create Return order.What cud be the reason for the condition type missing in Invoice????

    In T. Code V/06 go to this condiition type XPI1 and in control data 2 - check "Inter-company billing condition". This makes this condition to flow in the inter company invoice. Then you will be able to process the returns wrt to the invoice.
    In the copy controls from Inv to Retruns order , T Code VTAF, at the item level, use pricing type D or G(G if you want to redetermine taxes)
    Hope this helps
    Regards
    Sai

  • Pricing error - Mandatory conditions ZMWS DIFF are missing.

    Hi All,
    We have the error in package quotation Mandatory condition types (ZMWS) & (DIFF) is missing. We check randomly with some customers error is not appearing.(Error is occurring only for particularly ONE customer.)    
    Initially while entering the details in document (customer no., material, sales areau2026) before saving the document the error message is u201CInternal Error during Pricingu201D.
    After saving the document error is occurring as mentioned below.
    Error messages:   
    1. Pricing error: Mandatory condition MT Output Tax (ZMWS) is missing
    2. Pricing error: Mandatory condition Rounding Off (DIFF) is missing.
    Error message is clearing after some work around in the documents.   
    1. At header level, change the currency from CHF to EUR and then back to CHF.This will get rid of Round condition(DIFF).
    2. And to get rid of out put tax, Ship to address (at header partner tab) by change the country from CH to DE, and changing  Transportation zone and Post code country specific to DE. Close the address window and open it again. Change back the address to the original CH and close the window. Out put tax (ZMWS) error will go away.
    Kindly any one can give your valuable inputs on this issue. Your help will highly appreciate.
    Thanks in advance.
    Regards
    Bala

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • Pricing error: mandatory condition MWST missing

    hai SAP experts,
    while trying to create a sales order OR  i am getting the error pricing error: mandatory condition MWST missing
    please help to create the sales order.
    thanks in advance
    reddy

    Hi Narayana
    pricing error mandatory condition MWST is missing
    there are two possible reasons
    1) In your pricing procedure you have maintained MWST has ticked mandatory .
    2) you have not maintained VK11 for this MWST condition type after ticking mandatory in your pricing procedure.
    maintain VK11 for your MWST condition type and then create sales order with sales doc type OR.
    another option is in MWST condition type details go to manual enteries can be changed there you can see manual entries feild as D change it C. .so that the time creation of sales order also if you get the same error you can enter manually. in emergency case
    Reward points if useful
    Regards
    Srinath

  • Pricing error: Mandatory condition Price (ZPRO) is missing

    Hi team,
    We downloded the pricing procedure and all condition types from ECC to CRM.When we create an opportunity we are facing this kind of issue.P Pricing error: Mandatory condition Price (ZPRO) is missing.
    Since its downloaded from ECC i cant change it.
    Any point in the above issue.
    Thanks & Regards
    Rajesh

    Hi Rajesh,
    You need to check the condition type ZPRO in customizing - is it a manual condition Iin the pricing procedure? If so then it should be added manually to the document to remove the error. If not then it should be determined automatically. In order to determine why this is not done you should switch on a pricing trace - parameter PRC_TRACE in SU01 set to X will do this - see note 1545713 if WEBUI or 521908 to check in SAPGUI. After you switch this on log off and log on again then go into the document in change mode and check the condition tab at item level and click on accesses. Here you will see the path that was taken to determine the condition.
    Hope this helps with solving this.
    Kind regards,
    Vanessa

  • Pricing error : Mandatory condition ZHPR is missing

    The user is doing sales return.
    In VF02, The prices are not updated and ended up with the error " Pricing error : Mandatory condition ZHPR is missing"
    He used VK11 and updated the price and also tried in all key combination.
    Still it is showing an error.
    Please help.

    Hi,
    This is very common error, you can ref. through sdn.forum, however
    1, First check the Pricing procedure for  your condition ZHPR, also check if any requirements assigned  to your billing doc.
    2, Please check  the analysis of the pricing in u201CVF02u201D, Just click on the condition u201CZHPRu201D and view the reason on right side.
        I am sure you would find the fault.
    Regards
    DSR

  • Pricing error mandatory conditions TTE are missing

    Daer all,
    by creating an sales-order via transaction CRMD_BUS2000115 we get the following 2 errors after the input of one sales-position:
    - Item 10     No Tte Input document found B7FA9743CEC6A21DE1000000C0A84D08     
    - Item 10     Pricing error: Mandatory condition 0TTE is missing     
    The oss-notes 519942 (and the depending ones) did not lead into a solution. The simulation TTE_SIMULATION of the pricing was successful.
    Has anybody an idea especially, what appoints the relevant customizing settings ?
    Thanks in advance for any feed-back.

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing

    Hello All,
    For Complaint in CRM change in default item category gives the captioned error. The error is there for all Sales Organisations.
    Any suggestion how this error can be removed.
    Thanks & Regards,
    DP

    Hi PePe,
    Thanks for the response. Yes in the pricing procedure condition 0TTE is mandatory. We use this pricing procedure in some other transactions where tax is calculated.
    When we add an item (let say item 160) the defaulted item category does not result in any error , but when we change it to a different item category which is not price relevant this error pops up for item 110. Moreover this error disappears with some dummy change or with an Update price on Conditions tab.
    We in fact tried to trace the TTE for different instances and it fails with an error "TTE processing terminated" which eventually results with error "Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing" on the order.
    Any suggestions what all needs to be checked and how this error can be diffused?
    Regards,
    DP

  • B2B: Copy Pricing Procedure or Condition Types

    Hello sdners!
    I use b2b sap crm: e-commerce 7.0.
    Please advice me FM, which copy Pricing Procedure or Condition Types from catalog item to basket (order)!
    E.g: i want to buy a position from catalog with the name " A ". It cost 10 eur.
    When I click to order - the price of the catalog is transferred to the order (basket).
    Please help me find FunctionModule which do it ?
    Thanks

    Technically the price for the catalog item and the basket item come from two entirely different ways.
    Whereas the catalog item gets the price "directly" from IPC (or TREX in some instance), the basket price is computed in the ABAP side of the application. In the ABAP, the item price is again technically comes from IPC, but IPC is provided with some additional information to get the "customer specific" price.
    So, in theory, you can not copy the catalog item price using any FM.
    Even if you "copy" from catalog to basket (say, in the UI or java layer), the item in the basket will get the price from CRM backend everytime  the basket get updated.

  • How I tie the formula with conditions type?

    Hi,
    Than create the formula with tcode O3I7:
    1) how I tie the formula with conditions type?
    2) how I tie the conditions type with the formula with Calculation Schema?
    help me, please.
    thanks
    Edited by: celeste ziantoni on Feb 5, 2008 6:45 PM

    Hello,
    Pricing formula is created using transaction VOFM. It is tied to the condition types in Pricing Procedure definition in Alternate Calculation Type column. For Pricing procedure, the menu path is SPRO->Materials Management->Purchasing->Conditions->Define Price Determination Process->Define Calculation Schema.
    Thanks,
    Venu

Maybe you are looking for

  • Code Analyzer

    I am currently using CF 4.5 on a Windows 2000 server and am trying to migrate to MX7 on Windows 2003. The code analyzer does not seem to want to analyze code on a remote server, so after I installed developer version and copied all the files over to

  • Can't open powerpoint files in keynote since Mountain Lion upgrade

    Not having much luck and not sure which forum to post in as this could be a Mountain Lion issue, an iWork issue, but is also an iWork and/or IOS6 issue! Until last week I had Lion on iMac and IOS5 on iPad. I was able to log on to my work network serv

  • Nokia 2330 sofware update

    I have tried to connect my nokia 2330 and laptop using a connectivity adapter cable CA-50 but in vain. Even though i have sucessfully installed the nokia pc suite.....it cannot recognice my phone.I have tried to update the phone software in vain. Any

  • Business object data is not reflecting in data control

    Hi I am new to BPM i have a scenario to expose the Business objects(created in my own not from XSD) into data control while updating the any attribute in the business object,but it's not happening while i am trying this scenario. can some please help

  • My touch screen won't work when I wan to listen to music.

    When I try t scroll or touch any buttons while in the "Music" option, I can't do anything. The touch screen works for absolutely everything else, but the Music. Has anyone else had this problem?