Pricing problem with value based free goods!

Hi All,
I've got a pricing problem.....
Can anyone can come out with a solution.
Here is the Business Scenario....
In a super market pricing...should be implemented in such a way that....if the customer purchases any material(all materials) for $1000 he should be given a materisl XXX one unit free (free goods)
How to implement this in SD R/3 Scenario...
i have tried out with Free goods...n pricing...but was not able to implement it..can any one of you suggest me a solution for this plz..
Regards,
Pavan.

Hi Pavan,
I would suggest that you post this message in the mySAP ERP business suite solution application forum. Here is the navigation info:
Welcome to the SAP Forums » SAP Solutions » Enterprise Resource Planning (ERP) . It is more likely that someone from the SD slide will be reading that forum than this "SAP NetWeaver integration with my SAP ERP" forum.
I hope this helps,
Mike.

Similar Messages

Problems with value-based hierarchies in Oracle 11gR2

Hello,
I have the following problem:
I want to cereate a dimension with 2 hierarchies.
These hierarchies have to be value-based.
It's no problem to fill and display one of them, but when I fill both and try to display them, at the lowest level, the parent-child relevancy is now incorrect.
Let's display this in OLAP Worksheet for Cube Type OLAP 11g :
lcolwidth=20
rpr down nim_2 w 25 NIM_2_PARENTREL
                          ------------------NIM_2_PARENTREL------------------
                          ------------------NIM_2_HIERLIST-------------------
NIM_2                                KON                       AGT
L1_Total_AGT_A            NA                        NA
L1_Total_KONZ_K           NA                        NA
L2_AGT_A_A                NA                        L1_Total_AGT_A
L2_AGT_B_A                NA                        L1_Total_AGT_A
L2_AGT_C_A                NA                        L1_Total_AGT_A
L2_KONZ_1_K               L1_Total_KONZ_K           NA
L2_KONZ_2_K               L1_Total_KONZ_K           NA
L3_100_A                  NA                        L2_AGT_A_A
L3_100_K                  L2_KONZ_1_K               NA
L3_200_A                  NA                        L2_AGT_B_A
L3_200_K                  L2_KONZ_1_K               NA
L3_300_A                  NA                        L2_AGT_C_A
L3_300_K                  L2_KONZ_2_K               NA
L4_101_A                  NA                        L3_100_A
L4_101_K                  L3_100_K                  NA
L4_301_A                  NA                        L3_300_A
L4_301_K                  L3_300_K                  NA
L5_302_A                  NA                        L4_301_A
L5_302_K                  L4_301_K                  NA
100                       NA                        L3_100_A
101                       L4_101_K                  NA
102                       NA                        L4_101_A
200                       NA                        L3_200_A
201                       L3_200_K                  NA
300                       L3_300_K                  NA
301                       NA                        L4_301_A
302                       NA                        L5_302_A
303                       NA                        L5_302_A
304                       NA                        L5_302_AAs you see, the lowest level items are only connectet with one of the hierachies, instead connected with both. (100, 101, e.g)
If I build the same dimension in a 10g Cube, the result is now correct.
Let's display this in OLAP Worksheet for Cube Type OLAP 10g :
lcolwidth=20
rpr down nim w 25 NIM_PARENTREL
                     -------------------NIM_PARENTREL-------------------
                     -------------------NIM_HIERLIST--------------------
NIM                             AGT                       KON
L1_Total_AGT_A       NA                        NA
L1_Total_KONZ_K      NA                        NA
L2_AGT_A_A           L1_Total_AGT_A            NA
L2_AGT_B_A           L1_Total_AGT_A            NA
L2_AGT_C_A           L1_Total_AGT_A            NA
L2_KONZ_1_K          NA                        L1_Total_KONZ_K
L2_KONZ_2_K          NA                        L1_Total_KONZ_K
L3_100_A             L2_AGT_A_A                NA
L3_100_K             NA                        L2_KONZ_1_K
L3_200_A             L2_AGT_B_A                NA
L3_200_K             NA                        L2_KONZ_1_K
L3_300_A             L2_AGT_C_A                NA
L3_300_K             NA                        L2_KONZ_2_K
L4_101_A             L3_100_A                  NA
L4_101_K             NA                        L3_100_K
L4_301_A             L3_300_A                  NA
L4_301_K             NA                        L3_300_K
L5_302_A             L4_301_A                  NA
L5_302_K             NA                        L4_301_K
100                  L3_100_A                  L3_100_K
101                  L4_101_A                  L4_101_K
102                  L4_101_A                  L4_101_K
200                  L3_200_A                  L3_200_K
201                  L3_200_A                  L3_200_K
300                  L3_300_A                  L3_300_K
301                  L4_301_A                  L4_301_K
303                  L5_302_A                  L5_302_K
304                  L5_302_A                  L5_302_K
302                  L5_302_A                  L5_302_K-----
We are using the latest Version of AWM: Version 11.2.0.1.0A
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Thank you verry much for any help.

11.2.0.2 for AIX was announced in October 2010. See DOC ID 1249584.1
What is being announced?
We are pleased announce the October 19, 2010 release of Oracle Database 11g Release 2 Patchset 1 (11.2.0.2) on HP-UX > Itanium and IBM AIX on POWER Systems.Patchset 10098816
Description 11.2.0.2.0 PATCH SET FOR ORACLE DATABASE SERVER
Product Oracle Database Family
I have looked, but I cannot find a formal bug for this problem. My hunch is that it was fixed as a side effect of other changes, and I know there were several in this area. My simple test case did work in 11.2.0.2, so I hope it is all fixed. But feel free to enter an SR if you want. (If you mention my name in the SR then support should contact me.) You should certainly do this if moving on to 11.2.0.2 does not resolve the issue.

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Problem with replication based on materialized view

Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?

34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer"

Value-Basis Free Goods in ME21N

In PO creation, is it possible for free goods to be on value-basis rather than quantity-basis?
For example: If I buy A 1000USD, I'll get one B for free.
Cheers,
VT

Hi VT,
One more option....
Create PO with two line item,one line item for A and second line item for B.
To get the item B free, you have to select the check box of free item in the second line item.
if you will scroll right in PO line item you will get the check box of free item.
Regards,
Manish

Problem with value in object element declared as NUMBER(26,3)

We have an object OBJ_NAME_1 created like below and total element in the object are around 100 with in which only one element is of data type VARCHAR2(4000). Other are with small size as below
create or replace TYPE OBJ_NAME_1 AS OBJECT
( v_col1 VARCHAR2(4),
v_col2 VARCHAR2(4),
d_date DATE,
amount_1 NUMBER(26,3) . . . . . . . . . . .)
And we are creating an VARRY of above object as below:
create or replace TYPE ARRAY_NAME_1 AS VARRAY(1000) OF OBJ_NAME_1
Now we have one procedure with IN parameter of type ARRAY_NAME_1 as below and we are calling this procedure from java.
create or replace PROCEDURE SP_PROC_1 (
P_ARR_1 IN ARRAY_NAME_1,
P_FILE IN VARCHAR2,
E_MESS OUT VARCHAR2,
E_CODE OUT NUMBER) . . . . . . . .
My problem is with value of element amount_1 of array ARRAY_NAME_1 in the procedure. Actually data type of this element is NUMBER(26,3) in object. But from java we are able to pass value like 1234.12345 (with 5 decimal).
The declare section of the procedure are like below :
l_OBJ_NAME_1 OBJ_NAME_1;
m_amount_1 table_1.amount_1%type; /* amount_1 in table_1 declared as NUMBER(26,3)*/
n_amount_1 NUMBER(26,3);
In the begin section we are assigning variable like below:
IF (P_ARR_1 .COUNT>0) THEN
FOR i IN P_ARR_1.FIRST .. P_ARR_1.LAST LOOP
l_OBJ_NAME_1 := P_ARR_1(i);
m_amount_1 := P_ARR_1(i).amount_1;
n_amount_1 := P_ARR_1(i).amount_1;
END LOOP;
The value of variables are below after above assignment:
l_OBJ_NAME_1 . Amount_1 → 234.12345 (without round off)
m_amount_1 → 234.12345 (without round off)
n_amount_1 → 234.123 (with round off)
Actually all the above 3 variable/element has been declared as NUMBER(26,3), then the value in these variables should be with rounded up to 3 decimal place. Then why it is not happening with variable
l_OBJ_NAME_1 . Amount_1 and m_amount_1?
Please help.
Edited by: SANT007 on Aug 12, 2011 9:45 AM

Okay, thanks Patrick. I commented that out so now I can see the full error message. Actually, now the page just returns an "OK" (nothing else), and I click on that to return back to the page where I see:
Checksum error for Hidden and Protected item ID (26968176992578859), value ([object]), posted checksum (326873D5A54A4AF425EC4D500B9B4D02), expected checksum (********************************), index_i (10), index_j (2), index_m (2);
Okay, so that's evidently a new option in 3.1, it should have just been a 'Hidden' item, not 'Hidden and Protected'. So, I change this back to just 'Hidden', refressh the page, the re-execute it and try to select from the popup again. This time, instead of the more-or-less blank page with only "OK" on it, I also get "ORA-01722: invalid number" above the "OK". When I click the "OK", then I am returned back to the last good 'runnable' page I executed (since the search page is no longer 'runnable' (the javascript evidently is still returning an object instead of a number).
On a previous run of trying to track the problem down, I made the :P3_SEQ as a regular text field so I could try to see what was going on, and it briefly displayed "[object]" before the search executed and returned the error.
So thanks for helping me get past the first stage so I could see a better version of what the error is. Now I just need to figure out why an object is being returned instead of number. This worked fine in 3.0, and the only thing I can think of is that something, somewhere in 3.1's javascript is slightly different now, but I really don't know.
Bill Ferguson

DimensionmemberList with value-based dimension

Hi,
I'm unable to use a DimensionMemberList with a value-based dimension. It works fine with level-based, however when I select a value-based dimension and hierarchy in the wizard and click on "Next" an Error pop-up appears with no message and I have to click on "Cancel" to get out of the wizard.
Has anyone encountered this behavior?

Hi Ankita,
As per my Understanding the VP column did't map to any LTS .
When ever u have multiple LTS in Dim Admin tool won't create Dimension Hierarchy manually we need to create that.
Follow these steps to resolve your Problem...
1) give the simple join in physical layer for that two tables.
2) Create one Dim table in to BMM layer drag all columns in 2 tables in to BMM Dim table so u can able to see all the columns is mapped in to their respective LTS.
3) Now u can create hierarchy manually step by step.Like Grand total Parent ----> Child level .
4) If u have any fact table joined with these dimension in physical layer give the logical joins in BMM layer and set the content levels properly.
Let me know need any detail clarification.
Thanks,
Satya

Problems with location based applications

I am having problems with all of my location based applications i.e. none of them work. It seems I can never be located by the GPS no matter where i am and i just get a permanently spinning wheel. I have deleted and reloaded the Apps (although even with the generic Maps App i cannot be located) and i have reset the phone Reset iPhone (but havent Reset Settings or Restored yet). I love my iPhone but this is very frustrating. Can someone please help ?

Didn't work unfortunately. My Location Services were On so i proceeded to Restore. All went ok on the Restore but i still have the same problem. I have 4 App's that are location based and none of them work. Your suggestion ? Thanks for your help.

9860 Bluetooth problems with car hands-free

I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
Any ideas, please?
Thanks!
Solved!
Go to Solution.

Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
Dave

Problems with Listobject based on a recordgroup

Hi all,
I have three problems with a Listobject (popup-_list) showing the records of a recordgroup.
The recordgrroup is created programatically in the WHEN_NEW_FORM_INSTANCE-Trigger of the form. It shall be the source of a ListObject. The values of the recordGrpoup and therfore also of the Listobject depends on the values of an master-datablock. Changing the values of the masterblock, the recordgroup must be requeried and the listobject must be repopulated.
1. When opening the form, the masterblock is empty. Same I want to have the listObject empty. An empty recordGroup seems not to be applied to the ListObject. Is there any possibility?
2. My sql-statement of the recordgroup works with a global variable like so:
:global.grpartid := '1004';
group_id := create_group_from_query
('grpLagorte', 'SELECT evm_a_lagort.bez, evm_a_lagort.lagort_id from evm.evm_a_lagort, evm.evm_n2m_artikel_lagort where EVM_n2m_artikel_lagort.H_MANDANT = m.EVM_A_lagort.H_MANDANT AND evm.EVM_n2m_artikel_lagort.lagort_ID = evm.EVM_A_lagort.lagort_ID and evm.evm_n2m_artikel_lagort.artikel_id = ''' ||:global.grpartid||'''');
I would prefer to replace the global variable with an item from my master datablock, but that seems not to work.
3. I have to requery the group and repopulate the list when changing the master-data.
declare
status                NUMBER;
     list_item          item := find_item('evm_jn_a_l.lst_lagort');
begin
:global.grpartid := :evm_a_artikel.artikel_id;
status := populate_group('grpLagorte');
message ('Status: ' || status);
message ('artikel_id: ' || :evm_a_artikel.artikel_id);
message ('Global: ' || :global.grpartid);
if status = 0 then
     populate_list(list_item, 'grpLagorte');
else
     message('Fehler bei Abfrage der Datensatzgruppe');
end if;
end;
The messages show the right values
status = 0
artikel_id = the choosen next one
global.grpartid = the next artikel_id
The content of the Listobjet does not change.
Its a problem of the recordgroup (How can I figure that out?) or its a problem of the listObject or anything else?
Help would be very appreciated and the problem is a bit urgent.
Thanks
Silke

Silke,
I may not have the answer to all of your questions.
1. If you do a clear_list on the list item and, prior to this, assign it a null value. Does this work, assuming you didn't set the "other" property ?
2. What if you do
_artikelId varchar2(100);
_artikelId:= :block.item;
group_id := create_group_from_query
('grpLagorte', 'SELECT evm_a_lagort.bez, evm_a_lagort.lagort_id from evm.evm_a_lagort, evm.evm_n2m_artikel_lagort where EVM_n2m_artikel_lagort.H_MANDANT = m.EVM_A_lagort.H_MANDANT AND evm.EVM_n2m_artikel_lagort.lagort_ID = evm.EVM_A_lagort.lagort_ID and evm.evm_n2m_artikel_lagort.artikel_id = ''' ||_artikelId||'''');
You should be able to do the same using global variables, in case you need it to be global
3. I don't see whats wrong with the list, maybe you can try to do a clear_list before repopulating it. If this doesn't help try the "magic bullet" and call
synchronize;
after populating the list. I checked if there is a bug filed on this issue for Forms 6i (I remember that you are using Forms 6i) but there is none. So the component should be fine.
Frank

Problems with value retorned by FM: 'SPELL_AMOUNT' with language 'ES'

Hi,
I'm having problems with the FM 'SPELL_AMOUNT' with language 'ES'.
When amount it's over 1 billion, the output is something like this:
Amount (NUM)--Actual output--
wanted output
1.000.000.000, 00 -
Un Millardo Millones -
Un Millardo or Mil Millones
25.000.000.000,00 -
Veinticinco millardos millones -
Veinticinco millardos or veinticincomil millones
Please, if somebody could help me, god bless you!!!
Alexis Sanchez
ABAP Trainee
Valencia, Venezuela

Hi,
I tested it in SE37, i am getting the correct output, Please make sure that you are passing all the values correctly i mean the CURRENCY .
Regards
Sudheer

Problems with file based repository

I am facing problems with Oracle 10g cluster which is using file based repository.Every now and then one of the nodes in the cluster gives problems and I get error message
"The DCM repository is not currently available. The Oracle Application Server ins
tance, "abc", is using a cached copy of the repository information. This operation will update the repository, therefore the repository must be available."
When I check the repository host its up and running. This happens intermittently. Is there any way to bring this node back in sync with repository? dcmctl resyncinstance doesnt seem to work.
Thanks
- Jayram

Generally this issue comes if esb-dt and BPEL runs on the same server. Try this:
1> go to <SOA_HOME>/integration/esb/config
2> edit esb_config.ini
add 2 parameters at the end of the file
PingCount = 30
PingInterval = 30
3> save it and restart soa

Facing problem with Value Help

Hi Friends,
I am trying to use Value helps for 4 different variables.
When I click on any Value help for a range of that variable, it gives list of 1st variable only.
Please help..
Jatin

Hi,
What is "We need all the variables with value help in a single form".
For this creat all variables with single form and then add value helps there.
You are getting same list means you are creating (using same design parameters) for both fields:
comp_code and Emp_code .
I think u did mistake in fields mapping while creating value help i.e step no 2
Can u check this once and if this is not correct just send ur gml file i will check and let u know the problem
Regards,
Govindu

Problems with Zone based Firewall and mtr (mytraceroute)

We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see
http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.:
<code>
 Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 100.0 8 0.0 0.0 0.0 0.0 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
7. de-cix20.net.google.com 100.0 7 0.0 0.0 0.0 0.0 0.0
8. 72.14.238.230 100.0 7 0.0 0.0 0.0 0.0 0.0
9. 72.14.239.62 100.0 7 0.0 0.0 0.0 0.0 0.0
10. 209.85.242.187 100.0 7 0.0 0.0 0.0 0.0 0.0
11. ???
12. ???
13. ???
14. bk-in-f94.1e100.net 0.0% 7 20.0 20.6 20.0 21.2 0.4
</code>
So it seems that the Firewall on my asr1001 is throwing away all packets with ttl-exceeded coming back from hops in between, they have another destination address.
At the moment I am inspecting all kind of traffic from my network outgoing:
ip access-list extended 101
permit ip any any
class-map type inspect match-all cmap1
match access-group name 101
policy-map type inspect pmap1
class type inspect cmap1
inspect
etc... (zones, zone-pair in-out with policies applied)
So I tried to let pass all icmp-traffic from the outside to my network:
class-map type inspect match-all cmap_icmp
match protocol icmp
policy-map type inspect pmap2
class type inspect cmap_icmp
pass
etc... (zones, zone-pair out-in with policies applied)
So this has no effect, but I tested and I could figure out, that when I pass all icmp-traffic from my network to the outside, THEN mtr does work.
BUT then normal ping does not work anymore, because it will not be inspected any more.
But I want to have a secure Firewall with inspecting echo-replys and working mtr anyway.
Has anyone the same problem or can even solve this issue?
Thanks in advance,
Stefan

Hi Andrew, thanks for Your answer...
So I have now:
class-map type inspect match-any cmap_icmp
match access-group name icmp_types
ip access-list extended icmp_types
permit icmp any any ttl-exceeded
PMAP IN--> OUT
(don't be confused, my "vlanxxx_pmap_in" is the pmap FROM my network TO the outside...)
policy-map type inspect vlan664_pmap_in
class type inspect vlan664_cmap_in (this is an extended ACL "permit ip x.x.x.x any")
inspect
class type inspect ipsec_cmap_in (this is because I have problems with VPN when inspected, another problem...)
pass log
class class-default
drop log
PMAP OUT-->IN
policy-map type inspect vlan664_pmap_out
class type inspect cmap_icmp (here comes the "ttl-exceeded"-ACL)
pass log
class type inspect vlan664_cmap_out (some open ports for some clients)
inspect
class type inspect ipsec_cmap_out (same problem with VPN when inspected)
pass log
class class-default
drop log
But unfortunately, the same problem occurs. Curiously, the first two packets seem to go "through" the firewall, but with 3rd packet the packetloss comes up:
 Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 50.0% 3 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 50.0% 3 0.9 0.9 0.9 0.9 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 0.0% 2 2.7 2.7 2.7 2.7 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 0.0% 2 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 0.0% 2 2.5 2.5 2.5 2.5 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 0.0% 2 4.1 4.1 4.1 4.1 0.0
7. de-cix20.net.google.com 0.0% 2 5.0 5.0 5.0 5.0 0.0
8. 72.14.238.44 0.0% 2 39.2 39.2 39.2 39.2 0.0
9. 72.14.236.68 0.0% 2 5.4 5.4 5.4 5.4 0.0
10. 209.85.254.118 0.0% 2 5.4 5.4 5.4 5.4 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 2 5.5 5.3 5.2 5.5 0.2
 Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 66.7% 4 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 66.7% 4 0.8 0.8 0.8 0.8 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 66.7% 4 2.1 2.1 2.1 2.1 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 66.7% 4 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 66.7% 4 2.6 2.6 2.6 2.6 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 66.7% 4 4.2 4.2 4.2 4.2 0.0
7. de-cix20.net.google.com 66.7% 4 5.3 5.3 5.3 5.3 0.0
8. 72.14.238.44 66.7% 4 70.3 70.3 70.3 70.3 0.0
9. 72.14.239.60 66.7% 4 5.8 5.8 5.8 5.8 0.0
10. 209.85.254.116 66.7% 4 5.8 5.8 5.8 5.8 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 4 6.3 5.7 5.2 6.3 0.5
In the sessions on the routers, I see only this entry:
 Session 206F66C (129.143.6.89:8)=>(8.8.8.8:0) icmp SIS_OPEN
Any other suggestions?

Pricing problem with value based free goods!

Similar Messages

Maybe you are looking for