Pricing Procedure for Stock Transport Order

Can anybody explain me that where can i maintain the Pricing Procedure for Stock Transport Order, Please Reply me .

Hi Sairam,
I am facing a similar problem.
Can you please guide me as to where I can maintain the price in STPO. I will be raising the STPO on an intercompany plant to get a (sort of ) subcontracting done.
I want to maintain the prices for the processing done by that plant. However, goods will be provided by us against the STPO and then receive them back after the work is done.
Any help on this is welcome.
Thanks
Anshuman

Similar Messages

Excise Pricing procedure for Stock Transport Order in MM with TAXINN

I am an SD guy running STO from manufacturing plant to sales depot
AND not able to create JEX proforma excise invoice from NL
to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB means configuration is ok
BUT base amount in J1IS is coming as zero because of missing excise conditions in MM STO pricing procedure
CAN anybody give me a sample EXCISE pricing procedure for STO
AND do i need to create records for the condition types in FV11 OR MEK1 please clarify
I know that calculation type 362 attached to BASB in TAXINN has something to do with this
I am able to see chapter ID in J1IS
And the relation between condition types in TAXINN and excise pricing procedure for STO
And I am able to create excise invoice in J1IG with zero excise values
I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
I think my explanation is sufficient enough
please give A sample of TAXINN

Hi Yoga,
Here u not need to do VL10b.just follow this steps and try.
In PO,Document type is UB and Item Category is U.
After creating PO,In MB!B with reference that PO number and using movt type 541
then u can see that stock in Transit.Now u do GR with respect to PO number.
Thanks & Regards
Suresh.
> Hello MM Gurus,
>
> I am doing Stock transport order between 2 plants
> under same company code.
> I have maintained all the required settings.Following
> is the process flow.
>
> 1.Creation of Purchase order with document type
> UB.(ME21N)
> 2.Creation of outbound delivery with respect to
> Purchase order.(VL10B)
> 3.Post Goods Issue from the supplying plant. (VL02N)
> 4.Creation of Excise Invoice in supplying plant.
> (J1IS)
> 5.Goods receipt at the receiving plant.(MIGO)
>
> While I am doing Goods receipt in the receiving
> plant, system is giving an error
> message "Maintain Vendor for the Excise Invoice" -
> Message no. 4F185.
> Why this message is coming and how to resolve this?
>
> Thanks & Regards
> Yoga

Minimum order qty for Stock transport orders

Hello
I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
Minimum order qty
Minimum delivery qty
Delivery unit
As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
Thanks,
OT

Hello
We are in an intracompany business case. The supplying and recieving plant are in the same company.
The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
So far I have not found any way to do this. Any ideas are greatfully received.
BR,
OT

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Plant as Vendor Defination and Assignment, for Stock Transport Order.

Hallow All,
Can anybody explain the procedure of Plant as Vendor defination and their assignment for the Stock transfer with Stock Transport Order.
Thanks in advance !!!!!!

hi
Following are the steps:
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2 Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4.In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5.Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM> Purchasing > Purchase Order > Set up STO> assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO>Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21n and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:[VL02n
13. Billing:VF01n
Save the document and its done
try this
reward points if heilpful

Inv. receipt field for stock transport order

guyz,
when we are creating a normal PO(from me21n), in 'Invoice' tab of item overview screen, we can find following three fields
inv. receipt
GR. based IV
final invoice
however when i'm creating a stock transport order from ME21N, i'm not able to see 'Invoice' tab at all... i thought it couuld be related to document type and its field selection but not able to find these fields in field selection group for po document types....
any help?

Hi,
In case of STO (Document Type "UB"), you will not find the "Invoice" Tab if it is between plants of same Co. Code and if you are using "Supplying Plant" instead of "Vendor". But if you want to do Invoice Verification for Freight/Delivery Cost, etc... you can fill the values for freight conditions in "Conditions" tab page and also assign a Vendor to the condition type itself by going into "Details"
Standard Pricing Procedure - RM2000
And in MIRO after GR (MIGO) > Select this STPO and also select "Only Planned Delivery Cost", it will populate the values and you can do LIV.

Auto Batch Determination For Stock Transport Order/Replenishment Delivery

All,
I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
Thanks,
Jeremy

Hi Jeremy,
you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
regards,
Santosh

Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218
4       6000038321 000010 Only 0 ST of material F784100 available
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000020 Only 0 ST of material F784100 available
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000030 Only 0 ST of material F784100 available
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Automatic delivery for stock transport order

Hi,
with ECC6 you have the possiblity to automatically create the delivery out of the stock transport order (STO) using the following customizing steps in SPRO:
Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation and CRM Billing
Materials Management ->Purchasing->Purchase Order->Set up Stock Transport Order->Activate Automatic Delivery Creation for PO Type and Shipping Point
We want to use a batch job that runs ME59N to autmatically convert the purchase requisitions to STO and deliveries. While testing we found out that ME59N gives a warning when the availability check in the STO is running in case there is not enough stock. But you still can create STO and delivery.
In case you only create a STO and put it in VL10B to create the delivery it will only create delivery items with the quantities that are available in warehouse. So no stock means no delivery at that time.
Is it also possible using ME59N to
a) not create STO and delivery in case there is no stock
b) only create STO and no delivery in case there is no stock
Cheers
mickey

Hi,
Setting to error message not possible as this would cause all STOs not be convertered where no stock is available. But we need this functionality only for one specific process.
Omit faulty items we also tested and did not provide the result we need. It is related to faulty purchase requisition items.
Cheers
Mickey

How to control Inspection for Stock Transport Order Just like Reg Receipt

Hi Folks,
We do Stock transport order to bring stock to the dock from a Hub. I would like the inspection process (using inspection plan to drive) similar to the regular receipt.
I tried setting up material master with 08 , but in this case everything went to quality and all transfer posting done between storage locations created an inspection lot.
Basically i want to setup 2 inspection types for a material, 01 for regular receipt and something else for all stock transport order. Both should use the same inspection plan to determine the quality process.
Let me know if this is possible.
Thanks
Jithin

Again I am saying very much depends upon the process that you follow.
My way to look at it is "Main Intention of your is to cut down the inspection lots while transfering storage location to storage location".So what would I have preffered is
1.Either make copy of mvt type 311 & deactivate QM for that .Every time when I transfer material from Sto to Sto then use this movt type so that lot will not be generated.
or
2.Deactivate QM for 311 & only use the mvt type which is copy of 311 for STO orders along with 01.
can i setup the material with both 01 and 08 inspection type and will it work with inspection plan for both type of PO's?
Yes ,as per above explaination !!

Document type for stock transport order

Dear all;
I have created one new purchase order document type for stock franport order from UB and given to a separate name ZUB ,but the at the time of creating one stock transport order the condition tab page is missing both in the header level and the item level. what may be reson and how to solve it ?
Please reply .
Regards;
Joydeep Mukherjee

Joydeep Mukherjee wrote:
Dear all;
>
> I have created one new purchase order document type for stock franport order from UB and given to a separate name ZUB ,but the at the time of creating one stock transport order the condition tab page is missing both in the header level and the item level. what may be reson and how to solve it ?
>
> Please reply .
>
> Regards;
> Joydeep Mukherjee
Hi Joy,
It could also be authorization issue, which needs to be assigned to the user. Check with your basis consultant.
Shiva

How to implement issuing stock in-transit for stock transport orders

Hello,
We are using stock transport orders in SAP. At the moment the supplying plant does a post goods issue for the delivery, the stock in-transit is "owned" by the receiving plant. Our Finance department wants this to be changed in such a way that the stock will be owned by the issuing plant until it has been received by the reciving plant.
It seems there is a possibility to do that, but I can not figure out what exactly needs to be done. Can someone explain to me the steps that need to be taken to implement this?
Thanks,
Ed

Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
Edited by: Csaba Szommer on May 22, 2009 8:28 AM

Pricing Procedure in stock transfer orders

Hi
I have a standard cost material which is to be stock transferred from one plant to another. (std cost in both plants). In this movement, I need the accounting document to generate an accrual to another account for Royalty that has to be paid at a later date to government.
This is not a delivery cost for which I will do any invoice verification. It is only an amount to be accrued to this account for every movement.
Example: Material at 10/- std cost in supply plant, 12/- std cost at receiving plant, when I am moving 1 unit, accounting normally will have cr inventory supply plant 10/-, dr inventory receiving plant 12/- and price difference 2/-.
Assuming a royalty of 1/- per unit, the above accounting should have an additional entry cr 1/- Royalty account.
I tried using stock transfer pricing procedure with a condition for Royalty (not delivery cost condition) with account key. But it is not hitting the royalty account.
Can some one suggest how to setup the pricing procedure in such case for stock transfer?
Greatful for any help.
Sriram

Hi
Any suggestions?
Thanks
Sriram

Delivery list for Stock transport orders

Hello,
I need to run a list of delivery documents (for stock transfers) including the reference PO number also u2013 list of deliveries and to which PO document delivery belongs to.
I tried to get that data from VL06O but there are no PO number mentioned, header with that name is found but info is missing/field is empty.
Could you inform me with what transaction/report I could get this information, similar as VL06O but with PO number?
thanks
Akkshaya

Hi,
is there no standard transaction for this?
Users cant get the data from tables
thansk
Akkshaya

Batch determination for stock transport order in po for delivery.

Dear All,
When I am creating a delivery in VL10D against a srock transport PO, while determining batches, i am getting an information message "batch determination is not possible because there is no search procedure".
How to configure so that , the batch should determine for making a delivery.
Quick responce will be highly appreciated.
Thanks & Regards
Prasant Sekhar

Hi,
I had the similar problem with one of the client and I could solve it.
The procedure is as follows:
1)goto spro->logistic general ->batch management->batch determination
2)Define condition table with proper selection of field .
3)Define access sequence which will consists of sequence of condition tables.
4)Define batch strategy and assign access sequence to it defined in step3.
5)Define batch search procedure and assign it to movement type 641 or 643.
6)Maintain batch search strategy condition record in tcode VCH1 with the combination u defined in access sequence.
7) Apply a USER-EXIT (MV50AFZ1) in the program - SAPMV50A as follows:
IF LIKP-VKORG = '0326' AND LIKP-LFART = 'ZNL' AND LIKP-KALSM_CH = ' '.
Select single KALSM into ikalsm
               from T683C
               where VKORG = likp-VKORG
               and VTWEG = '04'
               and SPART = '00'
               and AUART = ''.
               Likp-KALSM_CH = IKALSM.
ENDIF.
8) Once you create the delivery (VL10D) against PO, go to VL02N -> Batch Split -> Batch determination
You will find the batch will be splited into the delivery automatically.
Reward the point if feel relevant.
Regards,
Praveen Ghosh

Pricing Procedure for Stock Transport Order

Similar Messages

Maybe you are looking for