Primary Mailbox Database fails to replicate after failing over to secondary copy in DAG
We had an issue yesterday on a primary mailbox database server when the drive the log files are located on filled up and took the databases off-line on the primary server bringing them up on the secondary.
After the issue was resolved and enough space was freed up, all but one database failed back. The one that would not come back showed Failed in the copy status. It remained mounted on the secondary server. I attempted several times to 'update' the copy and
it would run for aver 40 minutes and look like it was going okay then it would 'fail' and end up in a 'failed and suspended' state. The error would indicated it could not complete because the it could not find the source server.
The Update job was configured to point to the server holding the secondary copy as the source so should not have a problem.
Any idea on how I can get the primary copy working again? I thought about making the second copy the 1st to activate and removing the primary copy from the DAG and recreating it, but past experience doing that did not resolve the issue.
Thank you,
Nick
Nick Laurino
Find out why database file is missing, I doubt on antivirus and start looking at the antivirus sacanning exclusion to ensure it is properly set...
File-Level Antivirus Scanning on Exchange 2010
Then try to reseed the database copy from a good source, it might be possible that antivirus would be scanning file when it is getting reseeded and causing issue...
How to Reseed a Failed Mailbox Database Copy in Exchange Server 2010
Blog |
Get Your Exchange Powershell Tip of the Day from here
Similar Messages
-
Disk failing to mount after failed repair
My g5 1.8dp is running 10.5.6. SInce I upgraded to Leopard from 10.4.11 it's been sluggish, quite unresponsive and programs are giving me the beachball a lot more often and for longer. I decided to run disk utility.
It told me I needed to repair the disk after verification highlighted some errors with "nodes. I booted from my install DVD and ran disk utility from the disc. Repair failed and now I can't remount my startup disk.
Any advice greatly received.Plastic Gangster:
While an exact copy of the error message you got from Disk Utility would have been helpful, your computer apparently has directory issues which Disk Utility cannot repair. Under conditions like these using a utility like Tech Tool Pro or Disk Warrior may be able to do the repairs DU can't.
There is a possibility that the HDD itself may be failing. If the HDD is three years old or more, I would consider replacing it. In any case, I suggest that you take immediate steps to secure your data. If you do not have a current backup of your data, that should be your first priority. If you do not have or do not wish to purchase one of the utilities linked, you could consider backup and reinstall, possibly using Archive and Install or Erase and install.
cornelius -
MacBook Pro fails to boot after failing to install Leopard
I have a Macbook pro G4 with tiger 4.11 and I tried to upgrade to Snow Leopard. The new system did not install "not compatible " and then it crashed. I tried to reboot but it won't do anything. I put the old installation disk and press "C" and it tried to boot up up and then just shuts off. I did the same with the four fingers: command, shift option, delete with the cd installation in and it will still not boot up. any ideas??
Hi Elaine, and a warm welcome to the forums!
Do you have access to another Mac with Firewire?
If so see if it boots into Target mode...
http://docs.info.apple.com/article.html?artnum=58583
To try to repair the Hard Drive. -
Mailbox Database Content Index Failed and Suspended
Hello,
I am having an issue with a Mailbox Database. The content index shows FailedAndSuspended. there are no Bad Copy Counts and it shows as Mounted. I have no DAG so this is a single database and followed the article
here:
http://technet.microsoft.com/en-us/library/ee633475(v=exchg.150).aspx
After it crawled for a little while it went to Failed, then unknown, then crawling, and has finally ended up at FailedAndSuspended again. I am also popping errors as follows:
MSExchangeFastSearch Event ID 1004
MSExchangeIS Event ID 1012
MSExchange ADAccess Event ID 4020
MSExchangeRepl Event ID 4087 (Though this is weird as it is a stand alone database why would it try to replicate it?)
MSExchange Common Event ID 4999
The following Warnings are hitting at the same time:
MSExchangeFastSearch Event ID 1006, 1009, 1010
MSExchange Mid-Tier Storage Event ID 6002, 10010
Anyone have any thoughts on a fix for this?
Michael R. Mastro IIOk I did a Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $false, then stopped both the MS Exchange Search and MS Exchange Search Host Controllers. Started them again and it showed disabled when I did a get-mailboxdatabasecopystatus. I then went
Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $true. After about 10 minutes got a FailedAndSuspended Status. So here are the logs from event viewer.
Log Name: ApplicationSource: MSExchange Mid-Tier StorageDate: 7/20/2014 7:53:49 PMEvent ID: 6002Task Category: ResourceHealthLevel: WarningKeywords: ClassicUser: N/AComputer: MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="MSExchange Mid-Tier Storage" /> <EventID Qualifiers="32768">6002</EventID> <Level>3</Level> <Task>6</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" /> <EventRecordID>703314</EventRecordID> <Channel>Application</Channel> <Computer>MRM2EX1.MRM2Inc.com</Computer> <Security /> </System> <EventData> <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data> <Data>00:00:00</Data> <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name: ApplicationSource: MSExchangeFastSearchDate: 7/20/2014 7:37:17 PMEvent ID: 1006Task Category: GeneralLevel: WarningKeywords: ClassicUser: N/AComputer: MRM2EX1.MRM2Inc.comDescription:The FastFeeder component received a connection exception from FAST. Error details: Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed() at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout) at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document) at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state) --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="MSExchangeFastSearch" /> <EventID Qualifiers="32772">1006</EventID> <Level>3</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-07-20T23:37:17.000000000Z" /> <EventRecordID>703192</EventRecordID> <Channel>Application</Channel> <Computer>MRM2EX1.MRM2Inc.com</Computer> <Security /> </System> <EventData> <Data>Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed() at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout) at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document) at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state) --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name: ApplicationSource: MSExchangeFastSearchDate: 7/20/2014 7:43:22 PMEvent ID: 1010Task Category: GeneralLevel: WarningKeywords: ClassicUser: N/AComputer: MRM2EX1.MRM2Inc.comDescription:An operation attempted against a FAST endpoint exprienced an exception. This operation may be retried. Error details: Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) --- End of inner exception stack trace --- at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager) at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) --- End of inner exception stack trace --- at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count) at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) --- End of inner exception stack trace ---Server stack trace: at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager) at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout) at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout) at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows() at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16() at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey) --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="MSExchangeFastSearch" /> <EventID Qualifiers="32772">1010</EventID> <Level>3</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-07-20T23:43:22.000000000Z" /> <EventRecordID>703224</EventRecordID> <Channel>Application</Channel> <Computer>MRM2EX1.MRM2Inc.com</Computer> <Security /> </System> <EventData> <Data>Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) --- End of inner exception stack trace --- at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager) at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) --- End of inner exception stack trace --- at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count) at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) --- End of inner exception stack trace ---Server stack trace: at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout) at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager) at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout) at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout) at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows() at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16() at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey) --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name: ApplicationSource: MSExchange Mid-Tier StorageDate: 7/20/2014 7:53:49 PMEvent ID: 6002Task Category: ResourceHealthLevel: WarningKeywords: ClassicUser: N/AComputer: MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="MSExchange Mid-Tier Storage" /> <EventID Qualifiers="32768">6002</EventID> <Level>3</Level> <Task>6</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" /> <EventRecordID>703314</EventRecordID> <Channel>Application</Channel> <Computer>MRM2EX1.MRM2Inc.com</Computer> <Security /> </System> <EventData> <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data> <Data>00:00:00</Data> <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name: ApplicationSource: MSExchange Mid-Tier StorageDate: 7/20/2014 7:58:39 PMEvent ID: 10010Task Category: ResourceHealthLevel: WarningKeywords: ClassicUser: N/AComputer: MRM2EX1.MRM2Inc.comDescription:Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="MSExchange Mid-Tier Storage" /> <EventID Qualifiers="32768">10010</EventID> <Level>3</Level> <Task>6</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-07-20T23:58:39.000000000Z" /> <EventRecordID>703327</EventRecordID> <Channel>Application</Channel> <Computer>MRM2EX1.MRM2Inc.com</Computer> <Security /> </System> <EventData> <Data>Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,</Data> </EventData></Event>
Michael R. Mastro II -
Passive server database still failed and suspended after seeding
Hi,
I have a 2 exchange 2013 servers in windows 2012 OS both servers are configured with DAG one is active and the other one is passive
I moved the 5 databases in other drive and it was successful but no matter what I try one of my database in passive server show "ContentIndexState: FailedandSuspended"
I tried to manually copy the database file from the active server to passive server but still the status is the same. Tried to reseed the database and wait for at least 1 day to change the status from FailedandSuspended
to healthy but still no changes happened.
I tried to delete the afftected database in passive server and copy the healthy database from active to passive again and do the reseed procedure but still the problem is the same. Please help. Thank you!Hi,
Now, you have active database in E:\ disk on active server and passive database in C:\ disk on passive disk, is it right?
We need to note that the relative location of the passive copy of the database is identical to the location of the active copy. In your case, you need to check if the relative location of the passive copy of the database is identical to the location of the
active copy.
If the path is different, you need to re-add database copy to check result.
Otherwise, you can check the following article to see if this can help you.
Content Index status of all or most of the mailbox databases in the environment shows "Failed"
http://support.microsoft.com/kb/2807668
Best regards,
Belinda Ma
TechNet Community Support -
MapiExceptionADNotFound When Creating a new Mailbox Database, No such error on the internet
HI
I have a problem that is when I create a new Mailbox Database I face the Error
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: EMAIL\Second Storage Group\EmailData; Error code: MapiExceptionADNotFound: Unable to mount database. (hr=0x80004005, ec=2417)
Exchange Management Shell command attempted:
mount-database -Identity 'CN=EmailData,CN=Second Storage Group,CN=InformationStore,CN=EMAIL,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Domain,DC=com'
Elapsed Time: 00:00:00
I have this server exchange 2007 SP1 running on Server 2003 SP2 R2 64-Bit
its also additional exchange to the old ex server 2003 SP2
what is this error
I check the evenlog and there is NO related error for this
and I ran EXPBA and it report no problem
I search MSN and Google for this and nothing usefull found
what shell I do
I am a fried that the Main database may fail if this presentForce replication betwenn Domain Controllers.
Article in PT-BR:
http://www.wellingtonagapto.org/2014/07/mapiexceptionadnotfound-unable-to-mount-database-hr-0x80004005-ec-2417-Exchange-Server-2007.html
Wellington Agápto
Consultor de Comunicações Unificadas & Mobilidade
ITIL, CCNA, MCP, MTA, MCITP, MCTS, MCSA, MCSE Communication
Edefense Segurança Digital
Site: http://www.edefense.com.br
Blog: http://www.wellingtonagapto.org -
I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?
Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.
-
How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
<subsystem xmlns="urn:jboss:domain:datasources:1.0">
<datasources>
<datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
<connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
<connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
<driver>oracle</driver>
<pool>
<min-pool-size>2</min-pool-size>
<max-pool-size>10</max-pool-size>
<prefill>true</prefill>
</pool>
<security>
<user-name>TEST_USER</user-name>
<password>Password1</password>
</security>
<validation>
<valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
<validate-on-match>false</validate-on-match>
<background-validation>false</background-validation>
<use-fast-fail>false</use-fast-fail>
<stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
<exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
</validation>
</datasource>
<drivers>
<driver name="oracle" module="com.oracle.jdbc">
<xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
</driver>
</drivers>
</datasources>
</subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed. -
Fail to add mailbox database copy
Hello,
When I am trying to add a mailbox database copy in DAG, I receive the following error:
error
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to notify source server 'mbx1.domain.local' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find the file.
when viewing details of the passiv, error message shows:
The database file wasn't found after log replay. The copy will be set to failed
Please help. ThanksHi,
Please use the Get-MailboxDatabaseCopyStatus cmdlet to check the health and status of mailbox database copy.
Please dismount and remount the active mailbox database, remove the failed passive database copy and then add it again to check the result.
Besides, please check the application log to see if there is any related events.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'
I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
Data migrated:
Migration rate:
Error:
MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227) Diagnostic
context: ...... Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server
FQDN> Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585 Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 45169 StoreEc: 0x824
Lid: 50544 ClientVersion: 15.0.847.32 Lid: 52080 StoreEc: 0x824 Lid: 44273 Lid: 49064 dwParam: 0x1 Lid: 37288
StoreEc: 0x6AB Lid: 49064 dwParam: 0x2 Lid: 59431 EMSMDB.EcDoConnectEx called [length=203] Lid: 51239 EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184 Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 3460 Lid: 12696 dwParam: 0x0 Msg: EEInfo:
Generation Time: 0414-04-07T16:32:03.2100000Z Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x0 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4 Lid: 8856
dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server FQDN> Lid: 12952 dwParam: 0x0 Msg: EEInfo:
prm[2]: Long val: 2767313664 Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 59505 StoreEc: 0x824 Lid: 50544 ClientVersion:
15.0.847.32 Lid: 52080 StoreEc: 0x824 Lid: 36081 Lid: 51152 Lid: 52465 StoreEc: 0x80040115
Lid: 60065 Lid: 33777 StoreEc: 0x80040115 Lid: 59805 Lid: 52487 StoreEc: 0x80040115 Lid: 19778 Lid: 27970
StoreEc: 0x80040115 Lid: 17730 Lid: 25922 StoreEc: 0x80040115
All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
The Source Server is Running Exchange 2007.
I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
I would appreciate any help you can give me!
Thanks,
JonAny update if you have resolved the issue.
Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required -
Mailbox Database Copy Status Failed
We have 2 Exchange 2010 servers. We run a DAG. Recently I have noticed that database copy DB2 which is located on Exch-1 is showing "Failed". Database copy DB1 which is located on Exch-2 is showing Healthy. I searched online
for information regarding the issue with the failed database copy. I found information that led me to run these commands.
Suspend-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name”
Update-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name” -DeleteExistingFiles
It went thru the seeding process and completed but the database copy still shows "Failed". Copy Q Length is 19. I have refreshed the console. What else do I need to do to correct this? I did recently shut down Exch-2 server
for maintenance. thanksHi,
It's glade to hear the good news. Thanks for your updating.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Switchover_status "FAILED DESTINATION" on both primary-standby databases
Hi,
I setup primary-standby databases and try to test the switchover functionality between them using the following commands:
alter database commit to switchover to primary with session shutdown;
alter database commit to switchover to physical standby with session shutdown;
Currently, both DBs are showing
open_mode= READ WRITE for "select open_mode_from v$database;" and
switchover_status = FAILED DESTINATION for "select switchover_status from v$database"
When both databases get into these states, how can I return them back to primary and standby roles? Could you please provide me a sequence of steps that I can execute to return them back to normal primary-standby states?
Thanks in advance for your suggestion.The OS is Red hat 4.1.2-500.
Oracle version is 11g.
Here is the sequence of steps that lead to this issue:
1. switchover_status on primary = to standby, switchover_status on secondary = not allowed
So on primary, I execute
alter database commit to switchover to physical standby with session shutdown;
and could be shutdown/startup mount ( I don't remember exactly)
2. switchover_status on secondary = to primary
So on secondary, I execute
alter database commit to switchover to primary with session shutdown;
alter database open;
3. Now on secondary, the switchover_status = FAILED DESTINATION
On primary, I execute
alter database commit to switchover to primary with session shutdown;
and could be "alter database open" ( I don't remember exactly)
The switchover_status in step 1) and 2) above should indicates that the data guard is working. At the end of the above steps, I cause both databases to get into switchover_status = "FAILED DESTINATION".
I hope to get one of the DBs back into standby role.
If I execute "alter database commit to switchover to physical standby with session shutdown", I will get
"ORA-16416: No viable Physical Standby switchover targets available"
In this situation, is there any recommendation for rescue? -
Exchange Connector - Update Mailbox Database Failed
Hi everyone,
OIM : 11g R2
Exchange : 11.1.1.6
I want to update "mailbox database" attribute of an exchange user.
I can make provisioning successfully.
When I update "Mailbox Database", "Database Updated " failed.
In log :
SEVERE: oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : doUpdate : Error while updating user
java.lang.IllegalArgumentException: Update type [Database] not supported
at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:274)
at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:271)
at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$ThrowableHandler.deserialize(CommonObjectHandlers.java:115)
at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObjectField(BinaryObjectDecoder.java:417)
at org.identityconnectors.framework.impl.serializer.MessageHandlers$5.deserialize(MessageHandlers.java:155)
at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
at org.identityconnectors.framework.impl.api.remote.RemoteFrameworkConnection.readObject(RemoteFrameworkConnection.java:153)
at org.identityconnectors.framework.impl.api.remote.RemoteOperationInvocationHandler.invoke(RemoteOperationInvocationHandler.java:101)
at $Proxy519.update(Unknown Source)
In Process Definition of Exchange User target resources, there is a "Database Updated" task.
If this task is exist, database must be updated.
Why I can not update mailbox database?
Thanks.
Best regards.Thank you Alex. As I was firing up the shell to test this out I realized I was using the wrong account! Poor naming convention it seems =)
Appreciate the help. -
Active Manager failed to mount database Mailbox Database?
So we had our stuff working fine with exchange 2010 rc and 08 r2 rtm... We installed antivirus on our server and now get the below message.... Everything "seems" to work though... We get two of these messages per reboot though... one with the main box database and one for the public folder one....
Again all seems to work okay, we have tried to remove AV but didnt fix.
Any suggestions?
Active Manager failed to mount database Mailbox Database 0539218550 on server main-server.hq.local. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error A transient error occurred during discovery of the database availability group topology. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2009-09-04 16:40:25:54
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115.I get this as well - two exchange 2010 SP1 UR2 servers. they host all roles on each, non-dag members as of now. Every time I reboot either server I get the same thing. MSExchangeRepl 3154 Service
Log Name: Application
Source: MSExchangeRepl
Date: 1/3/2011 10:54:07 PM
Event ID: 3154
Task Category: Service
Level: Error
Keywords: Classic
User: N/A
Computer: mail.mydomain.com
Description:
Active Manager failed to mount database Exchange DB on server mail.mydomain.com. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:07:310
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">3154</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-01-04T03:54:07.000000000Z" />
<EventRecordID>8851</EventRecordID>
<Channel>Application</Channel>
<Computer>mail.mydomain.com</Computer>
<Security />
</System>
<EventData>
<Data>Exchange DB</Data>
<Data>mail.mydomain.com</Data>
<Data>An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:07:310
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115</Data>
</EventData>
</Event>
Log Name: Application
Source: MSExchangeRepl
Date: 1/3/2011 10:54:06 PM
Event ID: 3154
Task Category: Service
Level: Error
Keywords: Classic
User: N/A
Computer: mail.mydomain.com
Description:
Active Manager failed to mount database Public on server mail.mydomain.com. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred
during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:05:732
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">3154</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-01-04T03:54:06.000000000Z" />
<EventRecordID>8850</EventRecordID>
<Channel>Application</Channel>
<Computer>Gmail.mydomain.com</Computer>
<Security />
</System>
<EventData>
<Data>Public</Data>
<Data>mail.mydomain.com</Data>
<Data>An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:05:732
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115</Data>
</EventData>
</Event> -
Load balancing failed to find a valid mailbox database.
While trying to create new mailbox, the following message is displayed:
"Load balancing failed to find a valid mailbox database."
If database is manually selected, there are no problems.
I've checked this:
Get-mailboxdatabase | ft name,isexcludedfromprovisioning
Name
IsExcludedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
Get-MailboxDatabase –Status | FT Name, Mounted
Name
Mounted
MAILBOX01
True
MAILBOX02
True
MAILBOX03
True
MAILBOX04
TrueWillard Martin:
Get-mailboxdatabase | ft name,issuspendedfromprovisioning
Name
IsSuspendedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
PK M:
This is Output for: Get-ManagementRoleAssignment -RoleAssignee <UserCreatingMailboxes>
Name Role RoleAssigneeName
RoleAssigneeType AssignmentMethod EffectiveUserNam
e
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup RoleGroup All Group Mem...
UnScoped Role Management-Or... UnScoped Role ... Organization M... RoleGroup RoleGroup All Group Mem...
MyDiagnostics-Organization ... MyDiagnostics Organization M... RoleGroup RoleGroup All Group Mem...
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipients-Organizatio... Mail Recipients Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup RoleGroup All Group Mem...
MyTextMessaging-Organizatio... MyTextMessaging Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup RoleGroup All Group Mem...
Organization Client Access-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup RoleGroup All Group Mem...
MyProfileInformation-Organi... MyProfileInfor... Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup RoleGroup All Group Mem...
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup RoleGroup All Group Mem...
User Options-Organization M... User Options Organization M... RoleGroup RoleGroup All Group Mem...
Audit Logs-Organization Man... Audit Logs Organization M... RoleGroup RoleGroup All Group Mem...
Database Copies-Organizatio... Database Copies Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup RoleGroup All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup RoleGroup All Group Mem...
Migration-Organization Mana... Migration Organization M... RoleGroup RoleGroup All Group Mem...
Move Mailboxes-Organization... Move Mailboxes Organization M... RoleGroup RoleGroup All Group Mem...
Move Mailboxes-Organization... Move Mailboxes Organization M... RoleGroup RoleGroup All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup RoleGroup All Group Mem...
Migration-Organization Mana... Migration Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup RoleGroup All Group Mem...
Database Availability Group... Database Avail... Organization M... RoleGroup RoleGroup All Group Mem...
Database Copies-Organizatio... Database Copies Organization M... RoleGroup RoleGroup All Group Mem...
Monitoring-Organization Man... Monitoring Organization M... RoleGroup RoleGroup All Group Mem...
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup RoleGroup All Group Mem...
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup RoleGroup All Group Mem...
Support Diagnostics-Organiz... Support Diagno... Organization M... RoleGroup RoleGroup All Group Mem...
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup RoleGroup All Group Mem...
Transport Rules-Organizatio... Transport Rules Organization M... RoleGroup RoleGroup All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup RoleGroup All Group Mem...
Address Lists-Organization ... Address Lists Organization M... RoleGroup RoleGroup All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup RoleGroup All Group Mem...
Role Management-Organizatio... Role Management Organization M... RoleGroup RoleGroup All Group Mem...
Information Rights Manageme... Information Ri... Organization M... RoleGroup RoleGroup All Group Mem...
Legal Hold-Organization Man... Legal Hold Organization M... RoleGroup RoleGroup All Group Mem...
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup RoleGroup All Group Mem...
Retention Management-Organi... Retention Mana... Organization M... RoleGroup RoleGroup All Group Mem...
Send Connectors-Organizatio... Send Connectors Organization M... RoleGroup RoleGroup All Group Mem...
MyDistributionGroups-Organi... MyDistribution... Organization M... RoleGroup RoleGroup All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup RoleGroup All Group Mem..
Database Availability Group... Database Avail... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Tips-Organization Mana... Mail Tips Organization M... RoleGroup RoleGroup All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup RoleGroup All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup RoleGroup All Group Mem..
Monitoring-Organization Man... Monitoring Organization M... RoleGroup RoleGroup All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup RoleGroup All Group Mem..
Public Folders-Organization... Public Folders Organization M... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup RoleGroup All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup RoleGroup All Group Mem..
User Options-Organization M... User Options Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup RoleGroup All Group Mem..
Retention Management-Organi... Retention Mana... Organization M... RoleGroup RoleGroup All Group Mem..
Journaling-Organization Man... Journaling Organization M... RoleGroup RoleGroup All Group Mem..
Transport Rules-Organizatio... Transport Rules Organization M... RoleGroup RoleGroup All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folders-Organization... Public Folders Organization M... RoleGroup RoleGroup All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup RoleGroup All Group Mem..
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup RoleGroup All Group Mem..
Journaling-Organization Man... Journaling Organization M... RoleGroup RoleGroup All Group Mem..
Mail Tips-Organization Mana... Mail Tips Organization M... RoleGroup RoleGroup All Group Mem..
Mail Recipients-Organizatio... Mail Recipients Organization M... RoleGroup RoleGroup All Group Mem..
Audit Logs-Organization Man... Audit Logs Organization M... RoleGroup RoleGroup All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup RoleGroup All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup RoleGroup All Group Mem..
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
MyBaseOptions-Organization ... MyBaseOptions Organization M... RoleGroup RoleGroup All Group Mem..
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup RoleGroup All Group Mem..
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup RoleGroup All Group Mem..
Legal Hold-Organization Man... Legal Hold Organization M... RoleGroup RoleGroup All Group Mem..
Send Connectors-Organizatio... Send Connectors Organization M... RoleGroup RoleGroup All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup RoleGroup All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup RoleGroup All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup RoleGroup All Group Mem..
ApplicationImpersonation-Or... ApplicationImp... Organization M... RoleGroup RoleGroup All Group Mem..
Address Lists-Organization ... Address Lists Organization M... RoleGroup RoleGroup All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup RoleGroup All Group Mem..
Databases-Organization Mana... Databases Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup RoleGroup All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes Organization M... RoleGroup RoleGroup All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup RoleGroup All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes Organization M... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
MyContactInformation-Organi... MyContactInfor... Organization M... RoleGroup RoleGroup All Group Mem..
Mailbox Search-Organization... Mailbox Search Organization M... RoleGroup RoleGroup All Group Mem..
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup RoleGroup All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Organization M... RoleGroup RoleGroup All Group Mem..
Information Rights Manageme... Information Ri... Organization M... RoleGroup RoleGroup All Group Mem..
Mailbox Import Export-Organ... Mailbox Import... Organization M... RoleGroup RoleGroup All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup RoleGroup All Group Mem..
Organization Client Access-... Organization C... Organization M... RoleGroup RoleGroup All Group Mem..
Role Management-Organizatio... Role Management Organization M... RoleGroup RoleGroup All Group Mem..
UM Prompts-Organization Man... UM Prompts Organization M... RoleGroup RoleGroup All Group Mem..
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup RoleGroup All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup RoleGroup All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup RoleGroup All Group Mem..
UM Prompts-Organization Man... UM Prompts Organization M... RoleGroup RoleGroup All Group Mem..
MyRetentionPolicies-Organiz... MyRetentionPol... Organization M... RoleGroup RoleGroup All Group Mem..
Databases-Organization Mana... Databases Organization M... RoleGroup RoleGroup All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup RoleGroup All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup RoleGroup All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup RoleGroup All Group Mem..
MyVoiceMail-Organization Ma... MyVoiceMail Organization M... RoleGroup RoleGroup All Group Mem..
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup RoleGroup All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup RoleGroup All Group Mem..
MyMailboxDelegation-Organiz... MyMailboxDeleg... Organization M... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Recipient Policies-Recipien... Recipient Poli... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Distribution Groups-Recipie... Distribution G... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Message Tracking-Recipient ... Message Tracking Recipient Mana... RoleGroup RoleGroup All Group Mem..
Mail Recipient Creation-Rec... Mail Recipient... Recipient Mana... RoleGroup RoleGroup All Group Mem..
Migration-Recipient Management Migration Recipient Mana... RoleGroup RoleGroup All Group Mem..
Move Mailboxes-Recipient Ma... Move Mailboxes Recipient Mana... RoleGroup RoleGroup All Group Mem..
Mail Recipients-Recipient M... Mail Recipients Recipient Mana... RoleGroup RoleGroup All Group Mem..
Monitoring-View-Only Organi... Monitoring View-Only Orga... RoleGroup RoleGroup All Group Mem..
View-Only Configuration-Vie... View-Only Conf... View-Only Orga... RoleGroup RoleGroup All Group Mem..
View-Only Recipients-View-O... View-Only Reci... View-Only Orga... RoleGroup RoleGroup All Group Mem..
Public Folders-Public Folde... Public Folders Public Folder ... RoleGroup RoleGroup All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Public Folder ... RoleGroup RoleGroup All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyTextMessaging-Default Rol... MyTextMessaging Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyContactInformation-Defaul... MyContactInfor... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyVoiceMail-Default Role As... MyVoiceMail Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyBaseOptions-Default Role ... MyBaseOptions Default Role A... RoleAssignment... RoleAssignment... All Policy As..
I've tested functionality with other admin-accounts and they have the same roles and same behavior. There have been no changes in roles or other Exchange settings as far as I know.
Maybe you are looking for
-
Stuck Outbound Queues in CRM system
Hi Guys, In CRM system the out bound queuse for the Sales Orders got stuck with the following error "Too many recursive subroutine calls" The Sales Orders are not getting replicated from the CRM system to R/3. The business partners associated with th
-
Option to download all the reports in a page
Hi All, I have a requirement like this.I have a page on my dashboard.In that page i have 4 reports.Is there any option to download all the reports in the page at a time or any workaroungd for this. Thanks, chandra
-
How to get the .class file for the extended Controller .java file
Hi, I did the below steps. 1. Created New OAWorkspace 2. Created New project 3. Imported the page .xml file 4. Added new .java file by extending the controller class 5. Added code in the .java file. 6. Ran the .xml file As I copied all the folders fr
-
Resetting the transaction figures of an account
Hi Is it possible to reset the transaction data for one master record/account alone. I know that the TCode OBR1 would reset data, but for the entire company code. How can I reset the transaction data for one account - say a vendor account? Thanks in
-
Loading master/transaction data from BI to NW BPC
hi what is best way of loading master & transaction data from BI to BPC? I know around 6 options for loading master data and 5 options for loading transactional data from BI to BPC . What is easiest and recommended method? what is typical method foll