Prime Infrastructure 2.0 to 2.1 upgrade; tftp/ftp fails everytime

We are trying to do an inline upgrade to 2.1 following the quickstart guide. When trying to use TFTP or FTP to copy the upgrade file to disk://defaultRepo the tftp software reports a timeout error waiting for the first acknowledgement. The defaultRepo directory then shows the file but only 512 bytes were copied.
This happens with multiple tftp programs and one FTP application.
Searching for a solution shows that this problem existed back in 1.2/1.3 and the fix involved logging in as root to modify a configuration file. Surely this isn't the same issue.

We have the same problems with upgrading IOSes via TFTP.
Other TFTP tasks, like gathering vlan.dat files in Configuration Archive Job, is also failed.
Netstat -an command in root shell shows that java process listening 69 udp.
udp 0 0 :::69 :::* 9183/java
/opt/CSCOlumos/jre32/bin/java -Djava.system.class.loader=com.cisco.xmp.classLoader.XMPSystemClassLoader -Dcom.cisco.xmp.XMPHome=/opt/CSCOlumos -Dinstall.dir=/opt/CSCOlumos -server -Xms32m -Xmx256m -XX:MaxPermSize=128m -Djava.awt.headless=true -Daes.dir=/opt/CSCOlumos -Dmibs.root=/opt/CSCOlumos/resources/wirless/mibs -cp /opt/CSCOlumos/classloader-conf:/opt/CSCOlumos/./lib/xmp/XMPClassLoader-8.0.24.jar com.cisco.remoting.packaging.RemotingServiceMain Tftp
Wireshark shows that Prime tried to do "copy flash:vlan.dat tftp:" but server says "%Error opening tftp://address/xxxx.cfg"
Strange thing that in directory /localdisk/tftp I see some collected vlan.dat files (about 10, regardless that we have >1000 switches). But I cannot copy them to device manually..
Summary, TFTP service is started but not works correctly.

Similar Messages

Prime infrastructure 2.1.2 cli template "copy tftp://..." error

I tried to copy a new ios image to several 3850 switche via CLI template but it failed.
The template lokks like:
#INTERACTIVE
copy tftp://10.x.x.x/cat3k_caa-universalk9.SPA.03.06.02a.E.152-2a.E2.bin flash: <IQ>Destination filename [cat3k_caa-universalk9.SPA.03.06.02a.E.152-2a.E2.bin]? <R>
#ENDS_INTERACTIVE
The error message looks like:
Error : Command returned an error : copy tftp://10.x.x.x/cat3k_caa-universalk9.SPA.03.06.02a.E.152-2a.E2.bin flash: ^ % Invalid input detected at '^' marker. SLT-EGDV4-255-4(config)#
What is wrong here?
Regards
Stephan

Well, from my point of view I've set up all things regarding ssh/scp correctly, but an upgrade via software deployment and ssh fails. Here is the logfile:
ade # cat 10.142.255.5_scp_telnet.log
dir /all flash:
Directory of flash:/
54210 -rwx 2097152 Apr 28 2015 08:01:10 +02:00 nvram_config
69697 drwx 4096 Apr 16 2015 14:27:37 +02:00 dc_profile_dir
54215 -rw- 10435 Apr 23 2015 14:04:01 +02:00 wnweb.tgz
14 -rw- 1248 Apr 23 2015 15:02:23 +02:00 packages.conf.3-6
54216 -rw- 82615244 Apr 23 2015 15:02:18 +02:00 cat3k_caa-base.SPA.03.06.02aE.pkg
54222 -rw- 99253056 Apr 23 2015 15:02:19 +02:00 cat3k_caa-wcm.SPA.10.2.120.0.pkg
15 -rw- 1248 Apr 28 2015 07:52:55 +02:00 packages.conf.3-5
54218 -rwx 2296 Apr 17 2015 09:52:48 +02:00 vlan.dat
54217 -rw- 4922044 Apr 23 2015 15:02:18 +02:00 cat3k_caa-drivers.SPA.03.06.02aE.pkg
12 drwx 4096 Jan 6 2014 07:41:29 +01:00 mnt
85188 -rw- 79122052 Feb 10 2015 08:44:16 +01:00 cat3k_caa-base.SPA.03.03.05SE.pkg
85189 -rw- 6521532 Feb 10 2015 08:44:16 +01:00 cat3k_caa-drivers.SPA.03.03.05SE.pkg
85190 -rw- 34530288 Feb 10 2015 08:44:16 +01:00 cat3k_caa-infra.SPA.03.03.05SE.pkg
85191 -rw- 34846028 Feb 10 2015 08:44:17 +01:00 cat3k_caa-iosd-universalk9.SPA.150-1.EZ5.pkg
85192 -rw- 25170832 Feb 10 2015 08:44:17 +01:00 cat3k_caa-platform.SPA.03.03.05SE.pkg
85193 -rw- 77456192 Feb 10 2015 08:44:17 +01:00 cat3k_caa-wcm.SPA.10.1.150.0.pkg
54219 -rw- 33756144 Apr 23 2015 15:02:18 +02:00 cat3k_caa-infra.SPA.03.06.02aE.pkg
54220 -rw- 42882380 Apr 23 2015 15:02:18 +02:00 cat3k_caa-iosd-universalk9.SPA.152-2a.E2.pkg
54221 -rw- 27362192 Apr 23 2015 15:02:18 +02:00 cat3k_caa-platform.SPA.03.06.02aE.pkg
13 -rw- 1248 Feb 10 2015 08:44:22 +01:00 packages.conf
1621966848 bytes total (1021952000 bytes free)
SLT-EGDV4-255-5#software clean
Preparing clean operation ...
[1]: Cleaning up unnecessary package files
[1]: No path specified, will use booted path flash:packages.conf
[1]: Cleaning flash:
[1]: Preparing packages list to delete ...
In use files, will not delete:
cat3k_caa-base.SPA.03.03.05SE.pkg
cat3k_caa-drivers.SPA.03.03.05SE.pkg
cat3k_caa-infra.SPA.03.03.05SE.pkg
cat3k_caa-iosd-universalk9.SPA.150-1.EZ5.pkg
cat3k_caa-platform.SPA.03.03.05SE.pkg
cat3k_caa-wcm.SPA.10.1.150.0.pkg
packages.conf
[1]: Files that will be deleted:
cat3k_caa-base.SPA.03.06.02aE.pkg
cat3k_caa-drivers.SPA.03.06.02aE.pkg
cat3k_caa-infra.SPA.03.06.02aE.pkg
cat3k_caa-iosd-universalk9.SPA.152-2a.E2.pkg
cat3k_caa-platform.SPA.03.06.02aE.pkg
cat3k_caa-wcm.SPA.10.2.120.0.pkg
packages.conf.3-5
packages.conf.3-6
[1]: Do you want to proceed with the deletion? [yes/no]: yes
[1]: Clean up completed
Than it fails back to TFTP which is working but taking lots of time... Attached is a screenshot of image management in PI.

Upgrading from LMS 4.1 to Cisco Prime Infrastructure

Looking for some information and confirmation on the upgrade process.
Currently we are running LMS 4.1 with a valid SAS Service Contract which will allow me to upgrade to Prime Infrastructure 1.1 or Prime Infrastructure 1.2 using the upgrade tool at no charge. After using the tool I am given access to download PI1.1 or PI1.2, however, it only actually let me download PI1.1 but said i do not have the proper permissions to download the 1.2 license. I also noticed that the software images for 1.2 are not available ont he ciso download page.
I am wondering what the latest version of Prime Infrastructure I will be able to upgrade to without an additional purchase. Can I upgrade up to all the way up to 1.4 or can I only go up to 1.2 (but then where is the download for the software).
If i can upgrade to 1.4 then what path should I take? 1.1 to 1.3 to 1.4? Just skip 1.2 since the download is not available and it will not let me download the license file?
Thank you for your help

LMS 4.x to Prime 1.x would not be considered a functional or recommended "upgrade" for most intents as you would lose several major capabilities (Topology, Ciscoview, many reports, compliance templates, etc.). Your best path right now would be to move your LMS along to the current version - 4.2.4. The release notes explain the upgrade path for that.
Licensing and upgrade eligibility-wise you need SASU for PI (not plain SAS for LMS) for major upgrades (i.e to go to 2.0). An LMS SAS contract entitles you to migrate to PI 1.2 which in effect means 1.3 although Cisco had some issues with updating the ordering system so there was not actually a SKU for PI 1.3 sold - only the 1.2 version which, when combined with your LMS SAS service contract, entitles you to move to PI 1.3 (or 1.4 but that's not generally recommended). More details are in the Prime Ordering and Licensing Guides here.
Personally, I recommend customers with existing LMS 4.x installations wait until PI 2.1 comes out to consider the upgrade. 2.0 still misses several tools present in LMS 4.x.
If you really want to move over to PI, you can export the data from LMS 4.2.4 and import into PI 1.3 (or 2.0).

Upgradding Prime Infrastructure version 1.2 and LMS 4.x to Cisco Prime Infrastructure 2.0

Hello,
A customer currently have 2,500 Cisco Prime Infrastructure Lifecycle device license using Prime Infrastructure version 1.2 and LMS 4.x. the customer wants to upgrade to Cisco Prime Infrastructure 2.0.
Does anyone know if it is possible to upgrade to version 2.0 without additional cost? the licenses from
Cisco Prime Infrastructure 1.2 has to be upgraded or we need only to rehost the VUDI.
Also could be possible to upgrade LMS 4.x to Cisco Prime Infrastructure 2.0?
thanks!

The two features you mention are two big missing ones. Another is full syslog capability. I don't believe CiscoView or day one support via package updates is included either.
Another is less tangible - the depth of experience and documentation available for LMS vs. Prime Infrastructure (particularly the wired management features). I agree for wireless PI 2.0 looks good. Some new features are coming for wired that look promising but they are new as of PI 2.0 so I'm taking a wait and see on them.
I hope to get 2.0 up in my lab in the next week or so and will hope to be pleasantly surprised but that's seldom the case with a major new release.

Prime LMS 4.2 to Prime Infrastructure 2.0 license migration

A couple of months ago I upgraded WCS to Prime Infrastructure (WCS via NCS to PI 1.2 at that time). Meanwhile PI is running version 2.0. For some reason, when purchasing the upgrade licenses, I also got a 500 device LMS4.2 upgrade license.
The exact part numbers were:
R-W-PI12-M-K9 WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration
R-PI12-BASE-K9 Prime Infrastructure 1.2 Base License and Software
L-PI12-LF-500-LIC Prime Infrastructure 1.2 - Lifecycle - 500 Device Lic PAK
L-PILMS42-500-M Prime Infrastructure LMS 4.2 - 500 Device Upgrade Lic
I have a virtual LMS appliance running where I installed the 500 device license I mentioned. I've actually never used LMS but that's a different story...
As I'm running low on PI device licenses (lifecycle licenses to be precise), the question is:
Is there an officially supported scenario to migrate these 500 LMS 4.2 licenses (that are already the result of a license upgrade) to PI 2.0?
If so: what part numbers do I need to purchase? I suppose I need
R-L-PI2X-U-K9 LMS to Cisco Prime Infrastructure 2.x Upgrade
plus
(L-L-PI2X-500-U LMS to Cisco Prime Infrastructure 2.x Lifecycle Upgrade 500 Device)
XOR
(L-L-PI2X-500-UP LMS to Cisco Prime Infrastructure 2.x Lifecycle Upgrade with PASS 500 Device)
Maybe someone can comment on that... thanks in advance.

In case anyone is facing the same issue:
Meanwhile, I finished the upgrade process using the following part numbers:

Migrating from NCS 1.0 to Prime Infrastructure 1.2

Hi friends
I know i had short discussion about this before but here it comes again and this time in detail.
I have NCS 1.0 with 100 devices support license installed. Now knowing it has reached end of sale, and also for the fact that Prime does cover devices like routers, i went ahead to the upgrade path via PUT (Product Upgrade Tool).
Finally I received an email (OBA) advising my order is ready. This email included two items in the shipment,
L-N-PI12-100-M=
NCS 1.0 to Prime Infrastructure 1.2 Minor Upg 100 Device
L-PILMS42-100-M
Prime Infrastructure LMS 4.2 - 100 Device Upgrade Lic
When i click to the link in the same email to download the license, it only shows me one file which is
L-PILMS42-100-M
I tried using this file and installing on the NCS1.0 but it gives me error that this file is not a license file. The license name suggests me that it is not the license to be installed on the NCS. The file should be L-N-PI12-100-M=
Thanks for reading this all and would appreciate all your inputs here.
Regards,
Mohit

Marvin Rhoads wrote:Your PI 1.2 also includes the right to install and use LMS 4.2 - a separately installed and licensed server.If you want Assurance (or Compliance) licenses for PI, they will have to be ordered separately. The license files delivedred when you buy those product SKUs will allow you to use those features. The starting point (base) in PI 1.2 is Lifecycle.
when i followed the inpath upgrade, i receved an email from the licensing that the license file is ready for download. the order said,
Product Name : L-PILMS42-100-M
Product Description : L-PILMS42-100-M : Prime Infrastructure LMS 4.2 - 100 Device Upgrade Lic
and the attached lic file "LMS2013021XXXXXXX.lic" came along from them.
but when i installed that lic file, i got the error message from the upgarded the PI 1.2 that the file is not a license file.
The trouble is i cannot generate another lic file (if the exsting generated file was corrupt) cos the PAK is already been used once.
Now i am wondering i can avail that LMS file that would be good, but when i spoke to the TAC, i was told that this file name doesnt seem correct as this is PI and it wont understand LMS file. It was only useful if you were upgraing from LMS to PI and because my case was NCS to PI, this will not work.
Any suggestions?

Prime Infrastructure Licensing question

I received a PAK and I generated a license from it. E Mail that I received shows this:
Product Name : L-PILMS42-50-M
Product Description : Prime Infrastructure LMS 4.2 - 50 Device Upgrade Lic
Now this says Prime Infrastructure LMS 4.2 and according to this link this is for LMS. Is this right or did our reseller sent us a wrong PAK?
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/quickstart/guide/cpi_qsg.html#wp71203

Hi Mohammad,
I dont have any seperate server and even I did not order for this license still I got this.It came with PI 1.2 -100 devicess licence.
it comes in bundle:
Understanding License Files Delivered with Prime Infrastructure
The following tables explain which license files are provided with Prime Infrastructure based on the PIDs you order. Prime Infrastructure 1.1 and 1.2 are product bundles that provide license files for multiple products.
The Prime Infrastructure 1.2 (bundle) includes:
•Prime Infrastructure 1.2 (product) - replaces Cisco Prime NCS 1.1 and NCS (WAN) 1.1
•Prime LMS 4.2
did u order seperately- Prime Infrastructure LMS 4.2 - 50 Device Upgrade Lic ??
Regards

Getting past "Fetch VLAN configuration - Command failed" errors in Cisco Prime Infrastructure 2.0 - How?

I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.

Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help.

Upgrade Prime Infrastructure v1.2.1.012 to v1.3.0.20

Hi,
is there any patch for upgrade from v1.2.1.012 to v1.3.0.20?
Or I can install upgrade directly?
St.

But there is:
IMPORTANT: You MUST patch your existing system prior to using this upgrade installer. See appropriate patches under Prime Infrastructure Patches.
And in the table:
f your existing system is...
Download this point patch file
Cisco Prime Network Control System 1.1.0 (1.1.0.58)
ncs_patch-1.1.0.58-upgrade-12.tar.gz
Cisco Prime Network Control System 1.1.1 (1.1.1.24)
ncs_patch-1.1.1.24-upgrade-12.tar.gz
Prime Infrastructure 1.2 (PI 1.2.0.103)
pi_1.2.1.12_update.tar.gz
Last row doen't match current version (1.2.1.012)
St.

Error in Prime Infrastructure 2.0 after Controller upgrade

Hello
I've got two WiSM and Prime Infrastructure 2.0. Last week I upgraded one WiSM to 7.0.250.0, plus a third controller. That worked fine, but since then, my PI shows one of the two controllers of the second WiSM as "Unreachable". I rebooted the PI and also rebooted the controller again, to no avail.
I tried now to update the snmp v2c credentials in PI, but receive an error.
The error message shown when I try to update the credentials is:
Error: Common-1: Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
Error:Detail: errorId=6 Invalid credential name: snmp_transport.
Any ideas?
I can normally access the controller through its webinterface and don't see any errors that would spring to the eye.
[edit]
Just manualy run the Task "Controller Operational Status" and received this error:
com.cisco.wnbu.server.common.errors.InternalException: COMMON-1
Thanks
Patrick

I worked with TAC Team and the final solution was to delete all controllers and add them again. This might get fixed in a future version though.

Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurt

i have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same

Cisco LMS 4.0.1 to Prime Infrastructure 2.x Upgrade

Hello,
we are using Cisco LMS and want to upgrade to Cisco Prime Infrastructure.
Now we have received the following license update: L-L-PI2X-100-U - LMS to Prime Infrastructure 2.x Upgrade 100 Device
and I wonder what is the best way to upgrade.
After a long search I found the following document on cisco:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide-c07-729990.html#wp9000727
There is only the talk of the upgrade from 4.2 LMS to Prime.
The problem is that we can not update to version 4.2 because of an error. Thats one reason why we need to upgrade to prime.
Is the only possibility now to export databases?
thanks in advance

Hi Heiko,
Upgarding from LMS 4.0.1 to LMS 4.2 , you need a New Licesne . Are you getting that error..
Upgarding from LMS to PI is alomost like a new Installation of PI. because only thing you can IMPORT from LMS to PI is the device list .
you can download the software from the below link:
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=284272932&release=2.0.0&relind=AVAILABLE&rellifecycle=&reltype=all
Installation link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html
hope it will help
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Cisco Prime Infrastructure - Assurance. Upgrade from 1.2 to 2.0

Hi,
We had purchased Prime Infrastructure 1.2 with SAU smartnet. Before we deployed 1.2 now I see 2.0 version is out and we qualify for upgrade license. However when I login to CCO to download the OVA file, I see 3 different editions. Express, Pro and Standard. Which one do I qualify to install? I have purchased following part numbers with 1.2 version.
R-PI12-K9     -     Qty 1
L-PI12-LF-100-LIC     -     Qty 1
L-PILMS42-100     -     Qty 1
L-PI12-LF-100     -     Qty 1
Thanks in advance,
Sam

Hi,
Check the below link for difference between [ Express, Pro and Standard ]
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/quickstart/guide/cpi_qsg.html#wp46865
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/quickstart/guide/cpi_qsg.html#wp75315
L-PI12-LF-100-LIC and
L-PI12-LF-100   :: Prime Infrastructure 1.2 - Lifecycle - 100 Device Lic PAK
are same as per my understanding and you can use these license to installed PI 2.0 with device count of 100.
Note: you can also add additional licenses(feature license ) for more Lifecycle (via R-PI12-K9 skus), which can be used for both Prime Infrastructure and LMS.
Thanks-
Afroz
[Do rate the post if you find it useful]

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
gmsncs/admin# dir disk:defaultRepo/
Directory of disk:defaultRepo/
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 1544204288 bytes total used
                27185573888 bytes free
                30293413888 bytes available
gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Local file not found
Anybody experience with this procedure.
Thank You
--- Update ---
Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
gmsncs/admin# dir disk:/defaultRepo
Directory of disk:/defaultRepo
926193986 Sep 26 2012 17:48:12 GRDbackup-120926-1736.tar.gpg
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 2471309312 bytes total used
                26258468864 bytes free
                30293413888 bytes available
gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
gmsncs/admin#

Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup. Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

Upgrade questions about Prime Infrastructure 1.1.1.24 to 1.3

               My existing NCS is installed with the small deployment and I'll have a total of 94 AP's but we are installing a new data center and replacing the existing 2 WISM blades for 2 new 5508 WLCs and added 20 more AP'S which will total 114 AP's and 4 controllers. The old WISMs blades and new 5508s will be up together until we migrate exisitng AP's to the new 5508s, so do I need to install the medium deployment since Table for Scaling Prime Infrastructure states:
Medium: 500 Total. The mix of devices may included up to:
     Wired devices: 300
     Controllers: 5
     Autonomous AP's: 300
     Unified AP's: 300
Small Deployments are for a total of 250 devices "with up to" 100 Unified AP's and 2 controllers??
Also as part of the download of software for PI 1.3 it   includes Automated Deployment Gateway is this a required piece to install for PI?? We don't use Cisco works so I'm not installing the LMS piece.
thank you,
Sandra

Isn't it rediculous the message says:::
Error(s): You must correct the following error(s) before proceeding:
Error:Unknown Exception Occurred. If the problem persists send logs to Tech Support.
And the fix is to use a different browser?
BTW:: Good Idea to try a different browser. By the looks of the Error Msg, it just didn't look like a browser issue to me so I didn't think to do that but certainly will next time on this and probably many, many, many other issues I see-
We only spent about an hour chasing our tails around to see what the issue was.
Again good catch!
I was speaking w/ another customer today who mentioned if the application were re-written to use HTML 5 these type problems would go away.
Oh well.
Glad I could help you get all the way upgraded and all the way up and running and able to push templates to your lightweight APs.
Cya

Prime Infrastructure 2.0 to 2.1 upgrade; tftp/ftp fails everytime

Similar Messages

Maybe you are looking for