Print across multiple pages

I am setting up a financial statement that will include monthly actuals & budgets. Is there a way to print this across multiple pages? I currenlty have it setup in Excel and even printing on 11x17 it prints across 2 pages.
I currently have XI but didn't now if the feature was available in this version or possibly in 2008.

hello E Hammer,
in XI to XI R2 you have 2 options:
1) use a Cross-tab as it can easily print across multiple pages.
2) try the workaround using the attached sample report...there are instructions on the report itself on how to create this "banner" style report. you do not need a special printer driver to do this. just to warn you in advance though, it's a bit of work.
in cr2008 it is much easier as you can use the "Disocciate Formatting Page Size and Printer Paper Size" option to create a report which would print out to multiple pages horizontally.
cheers,
jamie

Similar Messages

My report prints on multiple pages

My report which shows change requests by categories I setup and sort on prints across multiple pages. I do not want that. It is starting a new page for every catgegory. Where can I check to see what setting I have made (unknowingly) that tells it to start a new page for each category?
Thx

Assuming that you are grouping on Category, there are two places where it is possible to set this.
1. Right-click in the gray area to the left of the group header and select "Change Group". Go to the Options tab and verify that "New Page After" is not turned on. Close.
2. Right-click in the gray area to the left of the group footer and select "Section Expert". Go to the Paging tab and verify that "New Page After" is not turned on. You might also want to check other sections and verify that there is no paging set up elsewhere.
-Dell

How do you Spread an Image across multiple pages and print?

I'm trying to create a large poster to be put on a bulletin board. I've mangaed to spread the image across multiple pages but I can't figure how to be able to print the pages have the edges line up successfully after cropping. I've been playing with the bleed settings but can't figure it out. Here a shot of what im working with:
Im working in CS3 on Mac OS X

Create your InDesign document at your final size and when you print it out put a check mark in the box for Tile

PRINT ENLAGED IMAGE ACROSS MULTIPLE PAGES

I have a scanned image that I want to print at 4 times its original size across multiple pages. Is there any known way to do this?

Thanks for the info, guys.
I don't have InDesign installed. I'll consider installing it, but it's sad that we have to install an entire app to get functionality for Adobe graphics programs that even browsers offer routinely. Jeez, Firefox spans pages automatically.
If you have a graphic larger than the page and you don't opt to resize it, Photoshop should offer to clip the overflow or print multiple pages. And ideally, to print multiple pages with an optional overlap.
I would have thought this was in version 1. But then again, Photoshop didn't have a thumbnail browser until what, version 7?

Printing large Panel across multiple pages!

We are trying to print a receipt which has master panel consisting of more than 10 components(transaction panels) which are going to spread multiple pages. Is there a way to print this multiple page spanning receipt. I appreciate your response.

I don’t think you want to set the image’s width/height to the page dimensions. I think that will shrink the image to fit the page. If you leave the image as a larger size, FlexPrintJob should chop into enough pages.

Span picture across multiple pages

Besides using "careful cropping," does anyone know of a way to take a given picture and span its parts across multiple pages when printing? The lagest format I can print is 8.5x11", but I am trying to print an exploded view of a picture that would ideally be four by four 8.5x11" pages or four pages across and six deep. Regardless, I was only able to get it to work by carefully duplicating a picture four times and then cropping it into four equal and lined up 4x6 sections and then printing each 4x6 on an 8.5x11" sheet.

Leo,
I'm not sure I would have done this with columns. Because of your desire to link from one piece of text to another, in all three columns, I would use linking text boxes. Each of the three boxes on a page will be independent of each other, but can be linked to the boxes on the following pages. Does that seem like what you're looking for?
-Dennis

Printing Across Multiple Labels

I have a requirement to modify a report that will print data in a designated format. The report was originally designed to accommodate five or less detail lines. Now I have to change the report to accommodate an indefinite number of detail lines that will print across multiple labels. The labels are 2 1/2" wide and 1" high with a Times New Roman font of 5 (small font, but acceptable). The top of the report allows two lines of data for a header. There is a subreport that allows 5 detail lines and a one line footer that totals the detail lines.
This design worked fine when there where only five detail lines. However, there can now be more than five detail lines and these print on the label, losing the footer. What I need to be able to do is to print these detail lines across multiple labels. There will not be header or footer lines on these labels until the last detail line is printed, at which time the footer will print.
I have not been able to figure out how to get labels to continue when the detail lines exceed a specified amount and continue on the next label.
Can anyone offer any assistance, please?
Thank you in advance.

Not much info including version of CR but think of it this way, and it may be printer dependent, rather than defining your label size as 2 1/2 x 1 set your page size to the size of a typical printer or a continuous form feed printer. Something that lines up with your labels.
For example is if you print to a laser printer you'll see the label header info and then the multiple detail lines ( this is the Detail section of the designer ) and it prints until no more data then you see the footers being printed.
So what you do is manually space your fields so it lines up with the labels and then it should print all detail lines. You will have to create formula to insert lines to adjust for any missing lines so the labels line up when the footers start printing. Example, you don't won't the footer to start in the middle of a label, unless that is what you do want.
Think of it like a Continuous form Printer rather than a label printer. Depending on the printer and labels being used I'm not sure it will allow you to create a custom paper size, if it does though and you'll have to test this, set it for the maximum length you expect your labels to be printed.
Hope this makes sense?
Thanks
Don

Need to select and move images across multiple pages...

Hi,
I am using Indesign CS2 on a Windows machine and have a 25 page document with 4-up photos (4"X6") on individual pages. I used the ImageCatalog javascript to load these images so I don't seem to have any control from the Master page. I would like to group and move these images to a different location on their own pages.
Do you know how to select these images across multiple pages? Or can a simple script be written to process this task?
Thanks in advance for your help.
-Greg

Hi Greg,
A script can certainly do what you want to do--but you have to be a bit more specific. Do you want to move them to different pages in some predefined way, or do you just want to adjust them a bit on the pages they're already on?
Thanks,
Ole

Diplay results which span across multiple pages

hello friends
i want to display my search results which span across multiple pages with next and previos buttons. example google search .ie if u search for a topic it gives severl pages with next and previos buttons.
thanks in advance
R.G.SHARMA

Hi,
There is no way to delete those records selectively from front end.
The best possible way is to delete the records from MRP_FORECAST_DATES tables from backend.
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Select multiple frames across multiple pages for photos frames

Hi people!
How can i select multiple frames across multiple pages? I want my images to fit the frames by one click. I do not want to go through each page one by one . There must be some way to solve this.. or? Cant find a options that can do that so far?
Useing Adobe Indesin CS6.
thanks!

suppien_ wrote:
How can i select multiple frames across multiple pages?
You can't.
You can do it in Find/Change box. Set desired Frame Fitting Options in Object section and run find/change.

Orphan table header at bottom of page when page breaks a table across multiple pages

Hi all,
I think similar questions have been asked before but I have not found an answer.
Here's the scenario:
I have several dynamic tables in a dynamic form. The layout is flowed, and everything can grow and shrink as needed. That all works.
However, my tables have headers. Occasionally when one of these tables is large and needs to break across multiple pages, there will be just enough room at the bottom of the previous page to show the next table header, but not enough space to show any of the related table rows. So it ends up looking silly, with just an orphaned header at the bottom of one page, and then the table continues on the next.
I have my tables set up so that headers get repeated on subsequent pages, by setting the header row to "repeat row for each data item" on the binding tab. I would like to keep that functionality, but I just want to find a way to avoid these "orphaned" table headers that sometimes appear.
I have tried the "keep with next" option. However, although this does push the rendering of the header to the next page, it seems that according to livecycle the table still officially began on the previous page. Therefore I get a duplicate header because of the "repeat row for each data item" option.
I have also tried having two header rows, one that is set to only be displayed on the initial page, and the other that is set to appear only on subsequent pages (pagination tab). This did not work - I ended up with duplicate table headers.
Can anyone help me?
Thanks!

You shouldn't have "repeat row for each data item" selected for header rows.
You should have "include header row in initial page" and "include header row in subsequent pages" selected on the Pagination tab.
Then using a "keep with next" might work ok.

Table not going across multiple pages

I have two simple side-by-side tables that I want to stretch across multiple pages when necessary by clicking the Add Another button object.
I think I've done everything necessary to have the table repeat on multiple pages:
1. My table is in a subform.
2. The subform is set to Flowed.
3. The table has Allow Page Breaks with Content
4. The table is not a group table
5. I have the Rows in Binding to Repeat Row for Each Data Item
What I do notice is that when I click on either Table and then click the Pagination tab in Object--- Pagination is greyed out
Can anyone offer any suggestions?
Thank you.

Hi,
first of all thanks for the link to the tutorial
function(){return A.apply(null,[this].concat($A(arguments)))}
Niall O'Donovan wrote:
Example of building dynamic tables here: http://assure.ly/gk8Q7a.
I have created a header on my master-page (just a Logo-picture). When my dynamic table reaches the end of the page, it creates a new page - any problem yet.
But on the new page, the table just starts directly on the top (y = 0). In this way the table is placed above my logo.
Is there any way to solve this problem?
Anything like "check if there is a header on master page and set new rows on next table under the header"?

Spreading a single form across multiple pages

I'd like to implement a single record form that spreads it's items across multiple pages for the purpose of grouping related information on each page such as "Contact Details"," Education Profile" etc. There are way too many columns for a single page.
In Oracle forms you can create a form across multiple canvases or on different tabs of a tabbed canvas. Each item has a property to position it on which canvas.
Is this possible in ApEx? I can see that transaction processing could be complex.
How do I avoid, for example, inserting the record a second time if I commit from a different page?
Any comments appreciated.
Paul P

Another way to do this without javascript and ajax that works pretty well is to setup a list that represents the logical "sections" and display it as a sidebar list.
Create a hidden item on the page called PX_ACTIVE_SECTION and set the visibility of each region on the page based on the value of this item. For example: :PX_ACTIVE_SECTION = 'Contact Details'. You can also have multiple regions associated with a single tab. Set the default value to whatever section you wish to display first.
Next, set each list item to be "current" when :PX_ACTIVE_SECTION is equal to that item ('Contact Details', 'Education Profile', etc.). Also set the URL destination of each item to: javascript:doSubmit('section name');
Finally, add a branch back to the current page that sets PX_ACTIVE_SECTION to &REQUEST.. This traps the doSubmit call so you can set the hidden item. (Add a condition, if needed, to prevent this branch from executing due to other buttons and requests).
The result is that the user can switch freely between sections and save after all data is entered. The page does refresh (since it doesn't use AJAX), but if your regions aren't too big, it should be reasonable.

How to identify a user across multiple pages

Hi,
I'm doing a homebanking and I would like to know how to identify a user across multiple pages.
I have already take a look at HTTPSESSION, but I didn't understand.
Can someone help me.
I'm send the servlet Logon.
import java.io.*;
import java.sql.*;
import java.util.Date;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Cons_logon extends HttpServlet
     private Connection conexao = null;
     Login1 login1;
     public void init (ServletConfig cfg) throws ServletException
          super.init(cfg);
          try
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               conexao = DriverManager.getConnection("jdbc:odbc:bank");
          catch (Exception e)
               System.out.println(e.getMessage());
     public void doPost (HttpServletRequest req,
HttpServletResponse res)
throws ServletException, IOException
          String Suser, Spassword;
     PrintWriter out;
          res.setContentType("text/html");
out = res.getWriter();
String opcao = req.getParameter("log");
Thanks

I would recommend using the authentication mechanism that's guaranteed by the servlet spec. If you do that, you can just call
request.getRemoteUser()
to get the user name across multiple pages.
If you want to use your own login scheme, you can create a new session object and map it to a user name somewhere in your app. Or you can just put the name of the user on the session. But the preferred way is to use the default authentication scheme defined by the spec.

Same Region across Multiple Pages

Hi There!
Working on a requirement where I need same region across multiple pages.
One way (Hard way) to do it is , repeat the region in all the pages.
Is there any other way (smart way) so that I can write region once and reference it in other pages ? ? ?
Thanks
Krishna

Yes, you can design this form on Page 0. Then this form will apply to every page.

Print across multiple pages

Similar Messages

Maybe you are looking for