Print Confirmation Form: All Plans

Dear Experts.
I want know What is the name of the service(link) that is closed in the box green for put this  service out in a subarea. In this moment this service is a link in the iView of Benefits Participation
Attach Image following:
[Print Confirmation Form: All Plans|http://www.freeimagehosting.net/uploads/312757289a.jpg]
Thank in advance for your help.
Best Regards
Juan.

Dear Suresh
I checked the Views V_T7XSSSERSAR & V_T7XSSSERSARC using SM31 in the backend, but I don't found a service assign to Subareas with Text "Print Confirmation Form."
I also check the view V_T7XSSSERVSRV and not exits a service with Service Link Text "Print Confirmation Form..."
Can I put this service as a link in a Subarea?
Thank in advance for your help,
Best Regards
Juan

Similar Messages

  • Print Confirmation Form link missing

    We recently upgraded to ESS 603 and now on the Benefits page we no longer have the link at the bottom that says "Print Confirmation Form: All Plans".
    Any idea how to get it back?
    Thanks,
    Jennifer

    But the OSS Note [1240906|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1240906] says ESS_603 will fix this issue.
    ~Suresh

  • Benefits Participation Print Confirmation Form

    There is a Print Confirmation Form link on the Benefits Participation page that brings up an adobe form with a benefits summary. Where that form is located, maintained, and how can it be changed?
    Edited by: David Keiser on Feb 25, 2009 12:33 AM

    Hi,
    Go to Flexible Admin-->Form setup -->Assign templates to form types.
    And also in
    ESS >Home Page>services-->EMPLOYEE_FLEXBENS_PRINT_FORM & EMPLOYEE_FLEXBENS_PARTICIPATION
    Resources-->EMPLOYEE_FLEXBENSPARTICIPATION_SERVICE
    Here give the URL for Benefits Participation.
    Kind Regards,
    Saisree.S

  • Err print confirmation ?

    Hi,
    In benefit management , when i want to print the confirmation for the benefit plan , i got the err: like : 'No entry for form type B2 " .. Could you help me out for this
    Thanks

    Hi Arun,
    Thank you very much for your reply,
    I got this error for all employees , i can not print confirmation but i can enroll them.
    In the setup form IMG i left it default ( There are 2 SAPscript form for confirmation and infomation ) But i changed nothing ,,,, So i think that the default will be used...
    Till now i still get the same error
    Thanks,

  • Error when trying to print a form

    Hi all,
    I'm getting the following error when I try to print a form (transaction SFP - Form Builder):
    Cannot find PDL type for output device LOCL
    Message no. FPRUNX113
    Does anybody know why I'm getting this error? I get it for all forms I try, but not when e.g. I print some source code in se80..., so I guess it's not due to my printer settings.
    tia,
    Jeroen

    Hi Jeroen,
    Maybe you don't have in the TSP03 table the Printer Declaration for the LOCL Output Device (TSP03-PADEST field).
    Please take a look at SE16 transaction to confirm it.
    NOTE: Try to see also the ADS_GET_PRINTER_ATTRIBUTES function module and the LFP_PRINTPRI include, the error you are getting is occurring in the Line 60 of that include.
    Regards,
    Daniel Carvalho.

  • Wrong Header Discount at Order Confirmation Form, /SMB40/SDORC_A

    Hi All,
    I have set the smartforms, /SMB40/SDORC_A as the print out form for Order confirmation. However, it is found the header discount shown on that form is always wrong.
    For example, the header discount is 6.00% but shown as 60.00%.
    Could you let me know what's the problem?
    Cheers,
    Chris.

    Dear Chris,
    Please check note 852250. Also check the following settings:
    1. User setting -> Defaults tab
    2. IMG -> SAP NetWeaver -> Set Countries -> Define Countries in mySAP
    Systems.
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Print multiple forms between FP_JOB_OPEN and FP_JOB_CLOSE

    I am aware, that there are questions regarding "Printing Multiple forms", but I didn't find answers there.
    Still my system is not working as expected:
    1.  FP_JOB_OPEN is called
    2. the generated Adobe Forms function is called multiple times
    3.  FP_JOB_CLOSE is called
    This program doesn't deliver all the pages, but just the first call. How shall I solve this problem?
    (Coding should work anywhere with copy-pase.)
    data: fm_name           type rs38l_fnam,
          fp_docparams      type sfpdocparams,
          fp_outputparams   type sfpoutputparams.
    parameters: p_fpname type fpname default 'FP_TEST_02'.
    * Get the name of the generated function module
    call function 'FP_FUNCTION_MODULE_NAME'
      exporting
        i_name     = p_fpname
      importing
        e_funcname = fm_name.
    * Sets the output parameters and opens the spool job
    call function 'FP_JOB_OPEN'
      changing
        ie_outputparams = fp_outputparams
      exceptions
        cancel          = 1
        usage_error     = 2
        system_error    = 3
        internal_error  = 4
        others          = 5.
    * Call the generated function module
    call function fm_name.
    * SECOND CALL ****************************
    call function fm_name.
    * Close the spool job
    call function 'FP_JOB_CLOSE'
    *    IMPORTING
    *     E_RESULT             =
      exceptions
        usage_error           = 1
        system_error          = 2
        internal_error        = 3
        others               = 4.

    Hi ZSOLT,
    In order to call the form multiple times please do the following,
    1) Just before your FP_JOB_OPEN you need to pass the output parameters (good practice). You can also set other parameters as well (for example nodialog, preview, copies., etc)
      CLEAR  fp_outputparams.
      fp_outputparams-dest = 'PDF1'.      "Default pdf printer
      fp_outputparams-reqnew = 'X'.       "New spool request
    Now call your FM FP_JOB_OPEN with the above output parameters.
    2) Usually this step is processed in a loop. (getting your interface data into a internal table and then looping at it)
    But here I am enhancing your example code.
    In order to trigger the form multiple times you need to change some input data to the form (for example I have changed date and time below in the prepare test data sections) so that the call function fm_name gets regenerated every time there is new data
    data  l_datatypes       type sfpdatatypes.
    prepare test data
      l_datatypes-char = '#'.
      l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
      l_datatypes-numc = '42'.
      l_datatypes-dec = 0 - ( 12345 / 7 ).
      l_datatypes-fltp = 0 - ( 12345 / 7 ).
      l_datatypes-int = 4711.
      l_datatypes-curr = 0 - ( 12345 / 7 ).
      l_datatypes-cuky = 'JPY'.       " no decimals
      l_datatypes-quan = 12345 / 7.
      l_datatypes-unit = 'DEG'.       " 1 decimal
      l_datatypes-date = '20040613'.      
      l_datatypes-time = '100600'.         
      l_datatypes-lang = sy-langu.
    FIRST CALL ****************************
    Call the generated function module
      CLEAR fp_docparams.
      fp_docparams-langu = 'EN'.       
      fp_docparams-country = 'US'.  
      call function fm_name
        exporting
          /1bcdwb/docparams        = fp_docparams
          datatypes                = l_datatypes
          mychar                   = l_datatypes-char
         mybyte                   =
          mystring                 = l_datatypes-string
         myxstring                =
          mydate                   = l_datatypes-date
          mytime                   = l_datatypes-time
          mynum                    = l_datatypes-numc
          myint                    = l_datatypes-int
          myfloat                  = l_datatypes-fltp
          mypacked                 = l_datatypes-dec
      IMPORTING
        /1BCDWB/FORMOUTPUT       =
    prepare test data
      l_datatypes-char = '#'.
      l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
      l_datatypes-numc = '42'.
      l_datatypes-dec = 0 - ( 12345 / 7 ).
      l_datatypes-fltp = 0 - ( 12345 / 7 ).
      l_datatypes-int = 4711.
      l_datatypes-curr = 0 - ( 12345 / 7 ).
      l_datatypes-cuky = 'JPY'.       " no decimals
      l_datatypes-quan = 12345 / 7.
      l_datatypes-unit = 'DEG'.       " 1 decimal
      l_datatypes-date = '20100913'.                 "You need to change your data in order it to trigger a new form with the new data.
      l_datatypes-time = '10700'.                        "You need to change your data in order it to trigger a new form with the new data.       
      l_datatypes-lang = sy-langu.
    SECOND CALL ****************************
    Call the generated function module
      CLEAR fp_docparams.
      fp_docparams-langu = 'EN'.
      fp_docparams-country = 'US'.
      call function fm_name
        exporting
          /1bcdwb/docparams        = fp_docparams
          datatypes                = l_datatypes
          mychar                   = l_datatypes-char
         mybyte                   =
          mystring                 = l_datatypes-string
         myxstring                =
          mydate                   = l_datatypes-date
          mytime                   = l_datatypes-time
          mynum                    = l_datatypes-numc
          myint                    = l_datatypes-int
          myfloat                  = l_datatypes-fltp
          mypacked                 = l_datatypes-dec
      IMPORTING
        /1BCDWB/FORMOUTPUT       =
    Close the spool job
    call function 'FP_JOB_CLOSE'
       IMPORTING
        E_RESULT             =
      exceptions
        usage_error           = 1
        system_error          = 2
        internal_error        = 3
        others               = 4.
    I have tested the above code and I am getting multiple forms.
    Please try on your end and let me know if it works.
    Thanks
    Raj

  • How can i print logo in all the page

    i've created a form(SAP script) which have  five page.pls can anybody tell me how can i print logo in all the five page?

    hi,
    u can try this in
          windows
    change window type as CONST or MAIN.
    cheers,
    sam

  • Error while importing Forms in Planning using Formdefutil

    Hi,
    I am getting the following error when i try to import the forms into planning using Formdefutil utility provided. It used to work fine but today i am getting this error.
    Warning: unable to read transaction.interoperability config property*
    Setting HBR Mode to: 2*
    Cache Manager initialized...*
    HBR Logging Config File : HBRServer.properties*
    HBR Logging Config File : HBRClient.properties*
    +2011-04-28 10:27:13,336 WARN main com.hyperion.hbr.core.AccessControlManagerServ+
    er - HBR repository is not configured. HBR will not be available.*
    Embedded HBR initialized.*
    +2011-04-28 10:27:13,477 WARN main com.hyperion.hbr.db.DBConnectionManager - Unab+
    le to create a new connection for jdbc:hyperion:oracle://142.101.188.210:1521;SI*
    D=HYPQA1*
    +2011-04-28 10:27:13,477 FATAL Embedded EDS Server com.hyperion.hbr.core.PluginDa+
    taManager - Error deleting old Plugin Data.*
    +2011-04-28 10:27:13,555 WARN main com.hyperion.hbr.db.DBPluginDataTable - Error+
    while executing query: delete from HBRPluginData where UPPER(PlanningServer) = '*
    WHMM2459' and UPPER(PlanningAppName) = 'FEDERAL' and UPPER(PlanningRmiPort) = '1*
    +1333'+
    +2011-04-28 10:27:13,555 WARN main com.hyperion.hbr.db.DBPluginDataTable - Error+
    while executing query: insert into HBRPluginData (PlanningServer, PlanningRmiPor*
    t, PlanningAppName, OlapServerName, OlapUserName, OlapPassword) values(?, ?, ?,*
    +?, ?, ?)+
    +2011-04-28 10:27:13,555 FATAL main com.hyperion.hbr.core.PluginDataManager - Err+
    or adding Plugin Data.*
    Error adding Plugin Data.*
    Add/Update form under form folder - 4.3. AR & WIP*
    Import Form Failed - Balance Sheet Opening.xml*
    Kindly help
    Amogh

    First of all those errors look more related to HBR, though if it worked before I would restart services then log into the planning app and then try again.
    Have you tried a different form as well one without an ampersand &.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Printing a form

    Hi folks,
    I had an question, related to printing the form using sapscript. I am printing a sapscript form using two printers. The first one is HPLJ4000 : HP Laserjet 4000   and the model is Dell Printer and using this printer the form is printing fine.
    However when I print using another printer HPLJ4000 : HP Laserjet 4000 but a different model HPLJ 2100TN some of the data is not printing in the right font size. The font I am using is HELVE and I believe it is not recognising it.
    I do not know how to work on the issue, asked the Basis guy too he has no clue about it.
    Any thoughts or ideas will be helpful?
    Thanks,
    Sk

    Hi
    See this OSS notes
    OSSNote:960341
    Symptom
    In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
    Other terms
    CONVERT_OTF, SAPscript, Smart Forms
    Reason and Prerequisites
    The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
    The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
    Example:
    %Charwidth values from HP4300 HELVE 060 normal
    /Widths
    [ 278 333 500 633 633 1000 758 333 333 333 633...
    Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
    This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
    The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
    Solution
    Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
    Header Data
    Release Status: Released for Customer
    Released on: 30.06.2006  12:44:06
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: BC-CCM-PRN Print and Output Management
    Secondary Components: BC-SRV-SCR SAPscript
    OSS Note: 776507
    Symptom
    Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
    Other terms
    SAPscript, SmartForms, printing, device types, OTF
    Reason and Prerequisites
    Help required to choose proper fonts in a SAPscript or SmartForm
    Solution
    When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
    1) The language version of the form used to produce the printout.
    Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
    2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
    Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
    3) The output character set of the device type
    Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
    A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
    Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
    As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
    4) The set of available printer fonts for a given device type
    When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
    To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
    If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
    Note on SAPscript/SmartForms Print Preview:
    The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
    A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
    Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
    Which fonts are suitable for a given language?
    Language(s):            Font family to use in a form:
    Latin-1 (Western Europe/Americas) *******
    DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                            (LETGOTH, LNPRINT)
    Latin-2 (Central Europe) ****************
    PL, CZ                  COURIER, HELVE, TIMES
    ISO 8859-4 (Baltic) *********************
    ET, LT, LV              COURIER, HELVE, TIMES
    ISO 8859-5 (Cyrillic) *******************
    BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
    ISO 8859-7 (Greek) **********************
    EL                      COUR_I7, HELV_I7, TIME_I7
    ISO 8859-8 (Hebrew) *********************
    HE                      COURIER, HELVE, TIMES
    ISO 8859-9 (Turkish) ********************
    TR                      COURIER, HELVE, TIMES
    Simplified Chinese **********************
    ZH                      CNHEI, CNKAI, CNSONG
    Japanese ********************************
    JA                      JPMINCHO, DBMINCHO, DBGOTHIC
    Korean **********************************
    KP                      KPBATANG, KPDODUM, KPGULIM
                            KPGUNGSE, KPSAMMUL
    Traditional Chinese *********************
    ZF                      TWDPHEI, TWMING, TWSONG
    Thai ************************************
    TH                      THANGSAN, THDRAFT, THVIJIT
    Arabic (Unicode systems only) ***********
    AR                      ANDALE_J
    Verify your output by examining the OTF data
    When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
    The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
    Goto->Display Requests->Settings
    and choose
    Display Mode: Raw
    Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
    Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
    //XHPLJ8000    0700 00000000001
    IN04EALEXTEST_ZEBRA
    IN05%PAGE1
    OPDINA4  P 144  240 1683811906000010000100001
    IN06%WINDOW2
    MT0024401289
    CP11000000E
    FCHELVE  120  00109XSF100SF101110000067E X
    UL +0000000000000
    SW00067
    CT00000000
    ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
    The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
    //XHPLJ8000    0700 00000000001
    The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
    IN04EALEXTEST_ZEBRA
    In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
    The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
    OPDINA4  P 144  240 1683811906000010000100001
    The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
    CP11000000E
    Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
    FCHELVE   120  00109XSF100SF101110000067E X
    Header Data
    Release Status: Released for Customer
    Released on: 22.08.2005  09:57:20
    Priority: Recommendations/additional info
    Category: Customizing
    Primary Component: BC-CCM-PRN Print and Output Management
    Secondary Components: BC-SRV-SCR SAPscript
    BC-SRV-SSF Smart Forms
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Rearrange pages when printing adobe form with multiple master pages

    Hello!
    Good day to you all.
    I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
    1st master page: a
    2nd master page: b
    3rd master page: c
    4th master page: d
    all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
    What happens is that the preview/print shows (example: 3-page item)
    a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
    What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
    a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
    This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
    Thanks a lot in advance!
    Best Regards,
    abap_peer_dangs

    Hi,
    Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
    Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
    Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
    Let me know if this suffice, I can try with a local file and send you the script.
    @ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
    Cheers,
    Sai.

  • Printing Adobe Form in Webdynpro

    Hi Experts,
    I need one help  from all of you , its quite urgent.
    Actually I am trying to print Adobe form in webdynpro method like below:
       "----- Take the Adobe fprm -------------------"
          lv_form_name = 'ZHR_SAP_FORM'.
          CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
            EXPORTING
              i_name     = lv_form_name
            IMPORTING
              e_funcname = lv_fm_name.
          lfs_output_params-nodialog = 'X'.
          lfs_output_params-getpdf   = 'X'.
          lfs_output_params-device   = 'TR5T'.
          lfs_output_params-connection   = 'ADS'.
          CALL FUNCTION 'FP_JOB_OPEN'
            CHANGING
              ie_outputparams = lfs_output_params
            EXCEPTIONS
              cancel          = 1
              usage_error     = 2
              system_error    = 3
              internal_error  = 4
              OTHERS          = 5.
          IF sy-subrc <> 0.
    * Implement suitable error handling here
          ENDIF.
    *---Form language
          lfs_doc_params-langu = 'E'.
    *---Call Adobe form.
          CALL FUNCTION lv_fm_name  
            EXPORTING
             /1bcdwb/docparams         = lfs_doc_params
              gt_item                  = lit_zhrauth_item
              gs_hrauth                = lwa_zhrauth
           IMPORTING
             /1bcdwb/formoutput       =  lwa_output
           EXCEPTIONS
             usage_error              = 1
             system_error             = 2
             internal_error           = 3
             OTHERS                   = 4
          IF sy-subrc <> 0.
    * Implement suitable error handling here
          ENDIF.
    *---Job Close
          CALL FUNCTION 'FP_JOB_CLOSE'
    * IMPORTING
    *   E_RESULT             =
           EXCEPTIONS
             usage_error          = 1
             system_error         = 2
             internal_error       = 3
             OTHERS               = 4
          IF sy-subrc <> 0.
    * Implement suitable error handling here
          ENDIF.
    Here , the funtion module name is coming correctly.
    But when calling function CALL FUNCTION 'FP_JOB_OPEN' ,
    It is giving sy-subrc = 2 , i.e. usage error (An Exception).
    Similarily , due to this i am getting same exception in 
    CALL FUNCTION  lv_fm_name
    So some one please help me , what should i do ,
    am i supposed to pass some other parameter in  CALL FUNCTION 'FP_JOB_OPEN'
    Hopefully , waiting for responds.
    Thanks & Regards;
    Gaurav Singh

    HI Sikka,
    Thanx for the reply ,
    With your solution CALL FUNCTION 'FP_JOB_OPEN' is done.
    but the same  problem is still happening with
    CALL FUNCTION  lv_fm_name and it is giving sy-subrc = 2.
    i.e.   system_error             =  2
    Thanx !!!

  • Printing the form using output type and Standard program

    Hi all,
       I am a beginner on SAP.Now i get a doc for smartforms.
       It need to print a form.And need to create a output.I don't know how to create it and how to use it.
       And how to use the standard program to print the smartfroms.
       Can you give me a thought about that??

    Hi steven,
    first u copy the standard form and modify as u required.
    copy the print program.
    after that assign modify form to modified print program using NACE transaction code.
    NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program  name and form name->save the details.
    go for view->go for transport.
    go with the appropriate transaction suitable to your application.
    and provide one existing record->issue out put->go with print
    i think it will useful for you.
    Reward points if useful.
    Thanks,
    Usha

  • How to assign Vendor balance Confirmation form to F.18

    Hi All,
    I have customized the vendor balance confirmation form and program.
    Is it possible to assign this to Transaction code : F.18, if yes where to specify this.
    Thanks and Regards
    Parthi.

    hi,
    try trx.:
    ob77-79,  ob96
    A.

  • Problems printing a form with Adobe 8 Standard

    I created a form using LifeCycle Forms ES and sent it out for use in our company.
    I have received comments back from Adobe 8 Standard users that when they print the form the form rearranges itself.  Has anyone ever run into this issue or know how to fix it?
    Thanks!

    This is basically the same question as : http://forums.adobe.com/message/5405961#5405961
    You can only fill out the PDF forms in Adobe Reader, Adobe Acobat and Acrobat Mobile. Some browser will have Reader plug-ins which would allow you to fill out the form dirrectly in the browser but that is not guarenteed. This is a limitation from the browser (like Chrome) pdf capabilities (they just don't support all the PDF form's features and scripting).
    You will not have the option to embed the form when it is an PDF imported into FormsCentral. This is a feature only available for forms's designed in FormsCentral (web forms).
    We always suggest to people to have a button to download the PDF from their website (not embeded) and that they warn their fillers that they need to fill out the form using Adobe Reader, Acrobat or Acrobat Mobile
    For more information see:
    http://forums.adobe.com/docs/DOC-2013
    http://forums.adobe.com/docs/DOC-2653
    Gen

Maybe you are looking for

  • Is there a way to mirror the screen of an iPad to a mac via wifi?

    hi, I'm starting work on a system for a school, part of which will be to project the screen of a selected ipad onto an LED projector. Ideally this will go via a mac (iMac or mac pro) so that I can switch the source ipad in software. And even more ide

  • Ical server invitations to external email adresses are sent from "user"@localhost.localdomain

    Hello, I have quite a bad time getting the ical server in OSX 10.7 server to work correctly. If I invite a co-worker who also has an account on the server, everything seems to be fine. When I invite someone with an external email address, an email is

  • USB audio out of phase

    I'm having a strange problem with the USB audio output of my PowerBook. The left and right channels are out of phase, both on my USB speakers and my USB headset. The analog output from the headphone jack is fine. The problem seems to have arisen some

  • XML-RPC Service is not available

    I'm experiencing a problem where CF 8.01 will not start. the log shows the message "The XML-RPC service is not available. This exception is usually caused by service startup failure. Check your server configuration." I traced this to a corrupted /lib

  • Nokia 5800: Can I use EU version in US?

    Noob question maybe, but I use Tmobile and their 3G will NOT be compatible with either the US or EU version of the 5800. That's OK b/c I really only care about music AND style (I like the EU colors). So, all things considered, ex 3G, will the EU vers