Print from wireless laptop and print comes out hours later

My wife has a wirelessly connected laptop and when she prints from it, the printer doesn't print for a few hours.  When I print from the desktop which is connected directly to the router it prints right away.    We have a Netgear router, windows 7 and the Printer is an HP C5180 All In One.
Any help would be appreciated.

If you are able to print from your desktop properly, then the printer has been setup correctly. The issue could be with AV or Firewall programs installed on your wife's laptop, or some connectivity issue between her laptop and your router. These are the only 2 possibilities I can think of at this point. Try to disable the firewall and AV and they try printing.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Printing from wireless laptop to ethernet connected Officejet pro 8500 A909a

    I have an officejet pro 8500 A900a and a Linksys WRT54G router and I've been having difficulty printing from my laptop via WiFi. I used to be able to print regularly and I think HP sent me an update to some software that has since stopped that from happening. I have the IP and mask for the printer set manually asto never change and set the default gateway to the correct setting for my router.  I can ping the device and I can access the printer admin pages from my laptop using the ip address. I can even print reports and run diagnostics from the HTTP connection but no printing from Word or ANY other source.  The printer does print from another desktop that has a USB connection to the printer but the connection is not always plugged in.  What do I do?
    cheers

    I'm betting you just need to open up the ports in the firewall. I'll list them below.
    HP printer ports
    UDP
    TCP
    Acronym
    Definition
    Used for
    137
    137
    NetBIOS
    network Basic Input/Output System - (basic communication)
    UDP: Printing, Photo Card Upload
    138
    NetBIOS
    network Basic Input/Output System - (basic communication)
    UDP: Photo Card Upload
    139
    NetBIOS
    network Basic Input/Output System - (basic communication)
    TCP: PhotoCard Upload
    161
    SNMP
    Simple Network Management Protocol - Monitering network attached devices
    UDP: Printing
    427
    427
    SLP
    Service Location Protocol (finding out what things can do on the network)
    UDP: Printing, Photo Card Upload, Scanning, Faxing, Installation
    9100
    PDL
    page description language - printer control language (how does the page you want printed look)
    TCP: Printing
    9220
    TCP: Scanning, Faxing
    9500
    TCP: Scanning
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Can not print from wireless laptop

    Hello. I have been searching forums for the past 2 days now and have tried many suggestions made but I still cannot print. My environment has a Cisco 3560G switch which does DHCP with a VLAN for wireless clients, connected to this switch is a Cisco WLC4402 to manage all wireless access points which are Cisco 1130 and 1140 series. We recently purchased an HP LaserJet pro CP1525nw color printer which we have connected with an Ethernet cable to the Cisco switch on a port in the same VLAN as the wireless clients. The printer will pick up a valid IP address from the switch and if I connect a laptop with an Ethernet cable to the switch I can ping the IP of the printer and print to it once I install the driver, if I unplug the laptop from the switch and go over the wireless my laptop gets an IP in the same range as the printer and I can ping the printer IP address as well as open the web interface for the printer but cannot print, once I open the print queue on my laptop I see error printing and nothing prints out. I always add the printer as an IP port and supply the IP address when I install the driver to test. I have also gone through the manual for the WLC4402 but did not find anything for printing. There has to be a setting on the controller that is preventing me from printing but I don't know what it could be. On the laptop I use to test I also installed LPR and LPD and I even tried using another printer that I know works fine in its place and still could not print, so I don't think it's the printer. Does anyone know where I can start looking?
    Thanks

    The printer setup on the laptop is using Protocol RAW with port number 9100, cannot set it up as LPR because we do not have a print server setup, we are trying to do printing via IP address. I enabled Multicast as it was the only option I saw available in the WLC4402 (did not see anything for broadcast) and tried printing but have the same results. Anything else I can try?

  • My Pixma MX925 prints from wireless laptop Win8.1 but won't scan. Only scans to desktop.

    How can I set up my Canon Pixma MX925 to scan to wireless laptop running Windows 8.1, no problem in printing.
    Desktop connected by ethernet prints and scans. Printer only offers option to scan to desktop. 
    Have searched unsuccessfull to find answer.  

    Hello Eduardo_Hebilla,
    I'm sorry to hear that you are unable to scan wirelessly to your Officejet Pro 8500. I can see that you have tried to set a manual IP and this did not help fix the problem and you are still seeing the message "Scanner Not Found". I have researched this issue for you and I will post the troubleshooting guide below for you to follow.
    You will need to choose your Operating System and continue following the steps from there.
    'The scanning device could not be found '
    I hope this helps!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Do I need a router to interface with my wireless laptop and printer, or can booth tooth.

    Im having a problem interfacing the HP B210 all in one wireless printer to my ASUS wireless Laptop. Do I need a router or can I some hoe make the wireless connection using my blue tooth on my laptop. Please help.

    Well, the printer does not have bluetooth so that will not work.
    However, you can connect to it directly via wi-fi on your laptop.  From the front of the printer go to: Setup > Network > Restore Network Defaults.
    Now, on your PC, look for a wireless network beginning with "HP".  Join it.  There is no password.
    Now, go to Control Panel > Printers and Add a Printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Cannot print from wireless laptop with ultra line 9100 em router

    I am having the same problem with the new router unable to print from a wireless connected laptop only I have a ultra line 9100 em router from Verizon. I am naive as to terminology and I don't know where to start to change the IP address in the printer(HP series 6110 office jet) I got no help from Verizon and HP referred me back to Verizon. Can anybody help in plain English

    Does the Printer ALSO have a Wireless Connection ?
    Also are you running a Software based Firewall on either the desktop with the printer or the laptop ?
    I have seen instances where the Actiontec TCP/IP Range is different that the previous router and the software firewall detects this as a new network and blocks access unless you give it permission.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Print from wireless laptop (win7) to HP 5550 attached to desktop (xp-pro)

    network is wireless access point to router to multiple desktops.  Desktops are all XP-pro with a workgroup name (dexter).
    I can see the printer in a list on the laptop when I search for printers.
    Win 7 on laptop says I cannot use because there is no driver and it cannot find one.
    I temporarily connected printer to laptop and it installed a driver but still wants to search for one when I ask it to use the printer on the desktop.   This is a piece of cake in XP.  Driving me mad with Win7.  HELP!
    Thanks,

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Print from wireless Mac to Printer on PC (USB)

    Helping a friend. She has a mac connected to a wife Linksys router. PC is connected by ethernet to same router.
    How do I set up Mac to print rhough Windows XP machine USB connected printer please?
    I set up neighborhood printing on the PC and logged on usign teh Mac, but that is as far as it gets. It will not spool on the PC.
    -EMS

    On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
    If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
    http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
    (This guide mistakenly says it doesn't apply to Tiger - but it DOES)

  • Can't eprint from iphone or ipad. can print from wireless laptop????

    I cannot get my iphone to find my eprinter.   I started having this problem after my wireless co installed a
    new router.  Phone and Ipad will recognized my neighbors printer.  I have reset the network name etc.

    Please follow the instructions here in order and answer all questions in detail.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Just bought new replacement iphone from apple store and less than two hours later, the screen went blurry and I can barely see anything. Phone still functions fine though.

    Just bought a new replacement phone at the apple store and as soon as I got home, vertical lines came up through the screen and now it's extremely blurry. All the functions of the phone still work fine and I really can't see anything except a small part of the screen at the top. I called the apple store and he told me to put the phone in recovery mode on my computer and the restore and update it. I did this and I can tell the phone has restored yet it is still extremely blurry and I can't see anything to type it in. Is there anything I could do with this? The apple store is over an hour away and saving another trip down there would be great. Thanks

    Bad luck. Take ti back.

  • 5512 all in one wireless; unable to find printer from my laptop

    Last week we had to replace our wireless modem.  Yesterday was the first day we needed to print something. The printer was showing it was "offline" on my laptop and my son's laptop. It hadn't been connected to the new modem, so I did that. It shows a wireless connection and good signal strength. After that our laptops still showed it was offline.  Another laptop doesn't show the printer is offline but we get an "unable to print" error message. I decided I would uninstall the printer from my laptop and then reinstall it (I'd had this issue before and this worked) but now it says there's no printer found when trying to add it back.  Any ideas??? 

    Hello LLHRN07,
    Welcome to the HP Forums.
    I see that you are having an issue when it comes to connecting the printer to the new wireless router.
    I suggest that you try to run the Wireless setup Wizard from the printer. To do so, please go to the front panel on the printer, use the right arrow and go to the SetUp Menu.  Use the right arrow again and select the Wireless Menu. From here, go to the Wireless SetUp Wizard and follow the prompts to connect to the new router.
    If you have any issues, or any other questions, please feel free to write me back.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How can I print from my iPad air? We have wifi and can print from our laptop.

    How can I print from my iPad air?  We can print from our laptop.

    Setup AirPrint Printer
    1. Buy an AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and set printer and iPad on the same network
    3. Start printing from your iPad using AirPrint

  • [SOLVED] Apps freeze when i try to wirelessly print from this laptop

    I have an HP Zv6000 running arch that is about 2 1/2 years old, and I have shared the printer on my main desktop so that the laptop can print wirelessly (the desktop also runs arch).  The problem is, when I try to print from the laptop, Openoffice stops responding.  This also happens on certain other dialogs, especially when I am trying to change stuff in the Options dialog.  I am also unable to print from other applications.  I really don't know what the problem is here.  I have the printer's driver installed on the laptop and the usblp module loaded.
    Last edited by kclive18 (2008-06-24 11:02:56)

    Sorry for the double-posting, but I uninstalled and installed CUPS on both client and server, and followed the Linux to Linux printer sharing configuration posted on the arch wiki.  This laptop still freezes whenever I try to print anything except for a test page from the CUPS web interface.  So it must be config-related and the problem HAS to be on my laptop, since my server can print just fine.  Does anyone know what the problem is?  I've been trying for hours and nothing's wanting to work for me.
    EDIT: I tried running soffice from the terminal and I looked for any output.  This is what I got:
    [ken@myhost ~]$ soffice
    libGL error: open DRM failed (Operation not permitted)
    libGL error: reverting to (slow) indirect rendering
    Nothing really related to printing here.  Also, running gedit from terminal gave me no output whatsoever when it froze.  Weird...:|
    Last edited by kclive18 (2008-05-29 16:13:15)

  • Access Printer from both desktop and laptop

    Can i install a  HP Photosmart 5510 on my desktop using the usb connection, and access the same printer from my laptop using wifi?  Desktop is XP Pro and Laptop isn 64 bit Windows 7.

    You can, but why?  The 5510 is a network-able printer.  Connect it wirelessly to your wireless router and be able to print AND scan from both computers.  
    Sharing via USB will only sharing printing, not scanning.  It is hard to set up and the host computer can never go to sleep!
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing from pc laptop over wireless network

    Hi,
    I have been successful getting my mac to see my wife's xp pro laptop and the laptop sees the mac. I installed the canon i960 driver on the laptop but can't get it to print.
    If I open the i960 q on the mac and send a file from the laptop nothing happens. If i send a file from the mac it shows up. Withe the q on hold and the mac file showing I send a file from the laptop and it shows in the q. If i resume printing the mac file will print but the laptop file just disappears.
    If there is nothing in the q on the mac side the laptop file will not show up. when it does show up along with the mac file it does not print.
    I can see the q on the lap top as on the the mac. I also get a general message that the laptop cannot communicate with the printer
    Driver problem?
    baffles me.
    thanks

    Have a look at this guide if you are running 10.4
    Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
    http://www.ifelix.co.uk/tech/3014.html
    otherwise
    Printing to a printer on a Mac from a PC running Windows XP
    http://www.ifelix.co.uk/tech/3000.html
    Important note:
    If the printer attached to the Mac is a black and white printer you need to use the Apple Laserwriter driver regardless of which printer you actually have.
    So if you have a black and white laser printer, you should use the Apple Laserwriter driver.
    If the printer attached is a colour printer use the Apple Color Laserwriter driver regardless of which printer you actually have.
    So if you have a colour inkjet printer, you should use the Apple Color Laserwriter driver.

Maybe you are looking for

  • Need to convert the Varchar2 to decimal

    Hi, I need to convert source sybase varchar2 record in to decimal record in Target DB2 table by using the function in Oracle data integrator. In my source table, column is defined as varchar2 (4) and in target table same column has defined as Decimal

  • Error: Creation of a new user in CUP

    Dear all, During the creation of a new user in CUP, is generated the following error message: Error in the provisioning request. The error occurred in the system(s). Details of error: USER CREATE-Length password is not enough (minimum length: 8 chara

  • How to add a side bar?

    In many books, there is always a side bar that shows tips, interecting facts, etc. How do I add these in iBooks? And will it work for landscape and portait mode? Thanks!

  • How use locator with sax to get line number of an element?

    dear friends, it's clearly stated in subject. after trying for hours, i still couldn't figure out how to get line numbers. my class extends defaulthandler. please help. ozgur

  • How To Delete Certain Voice Recording in QM

    Dear all, I'm running UCCX 10.5 dan QM 10.5. Configuration is done using Archive Workflow and calls can be recorded. I've done several call for testing only. When i will enter production phase, i want to delete several testing voice recording. Does a