Print in duplex mode

Hi experts,
I need to print on duplex mode ABAP list documents. My printer works with  HPLJ4 PCL5 driver  (ricoh Aficio 3045) on SAP but when i try to print on duplex mode (the printer properties are set to print on duplex by default) i can't get it.
I don't use Smart forms. On SPAD i have created a new device, the acces metod is F: Printing on front end computer,  the device type copy of original HPLJ4 to test it, but i only can get paper printed simplex.
Please, Can you help me?
Thanks in advance

Hi,
The duplex settings in SPAD only work for device types that have the special list driver, Try using device type HPLJ4000 instead of HPLJ4 and create a new spool.
Regards,
Aidan

Similar Messages

  • SmartForm Last Page to be printed in Duplex mode

    I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode.
    Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page.
    My smartform contains 3 Pages  'First', 'Next' and 'TC'.
    If i set page 'Next' duplex then the 3rd page is getting printed on the back side of the 2nd page.
    So how can i Print the TC page on the backside of the Last Page.
    Thanks & Regards
    Sukriti.

    Hi All,
       I know this is a very old post. Currently I am also facing same issue. Does anybody has solution for it. ?
    Regards,
    Leona

  • Configurations done at SAP gui level to print in duplex mode

    Hi Gurus,
    We had a requirement to convert a printer to duplex mode, we changed all the settings at SAP level( kept duplex mode in printing mode and changed device type to SWAN (as post and pre2 device types are not available) ). But still we are not able to get the desired duplex mode.
    Is there are any further settings or something done in server?
    Is there any settings done at SAP gui to get the print as duplex from a report?
    Thanks in advance....
    Gopal.vvs

    Hi,
    Check the below links
    duplex printing configuration in SAP
    http://www.sap-basis-abap.com/sapab035.htm
    Hope it helps you.
    Rgds,
    Suman

  • Need Help...HP x476dw Printer and Duplex Mode

    My printer won't stop printing in duplex mode.  I have disabled all duplex settings and it's still printing double sided.  Don't know where else to look????

    From all of your apps or from one of them?  Where have you disabled the settings?  There are setting for page layour in apps (usually set to one page) and page settings on the HP (sest to duplex by default if my memory serves me on setup).

  • Canon ip4300 - Printing Properties, Duplex Mode

    Hi! Where can I activate the Duplex Mode? At Tiger it was no Problem, by using the standard driver. When I clicked on print button in menue (or APPLE + p), there were several options, for example the duplex mode. At Leopard there are no options, there ist just a print button. I use the newest driver from the Canon webpage. What can I do? Does anybody know the problem?

    Have you used the blue disclosure triangle next to the printer's name to expand the Print dialog?

  • How can i modify my report to print in duplex mode ?

    Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
    (Is there somewhere examples of duplex printing report?).
    Thanks in advance.

    Hi Ludek,
    I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
    Here is my reg key :
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
    "AuthorizedCDFPrefix"=""
    "Comments"=""
    "Contact"=""
    "DisplayVersion"="11.5.8.82627"
    "HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
      70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
      00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
      00,00
    "HelpTelephone"=""
    "InstallDate"="20080416"
    "InstallLocation"=""
    "InstallSource"="C:
    CRXIR2SP2Full
    win32
    "ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
      00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
      38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
      00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
      30,00,44,00,34,00,41,00,7d,00,00,00
    "Publisher"="Business Objects"
    "Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
      00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
      6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
      00
    "Size"=""
    "EstimatedSize"=dword:001bcc81
    "UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
      78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
      00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
      39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
      00,30,00,44,00,34,00,41,00,7d,00,00,00
    "URLInfoAbout"=""
    "URLUpdateInfo"=""
    "VersionMajor"=dword:0000000b
    "VersionMinor"=dword:00000005
    "WindowsInstaller"=dword:00000001
    "Version"=dword:0b050008
    "Language"=dword:00000000
    "DisplayName"="Crystal Reports XI Release 2"
    Hope this helps you.
    Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

  • HP Laserjet M1212NF USB no longer printing in manual duplex mode

    Hello All,
    I am currently having issues with my HP LaserJet M1212NF printer connected via USB.  First, basic system information:
    Windows 7 64-bit
    Now, some backstory:
    The printer was initially setup using Network installation.  Then, I moved and could no longer access the network, so I deleted it from the Windows Device and Printer area and reinstalled it as a USB perinter.  I installed all the updated drivers and Firmware updates.  The printer now CANNOT print in duplex mode.  I choose Manual Duplex in the printer settings AND when I print a multipage document.  The printer simply prints the document normally, with no duplex.  Please help.  I've googled the problem, but have come up empty handed.

    Hi Wilhendrickx,
    I understand you aren't able to print two sided.
    Thank you for your reply.
    I will be happy to help you with this.
    You can set the two sided option two different ways. Try both to see if it makes a difference.
    To set the two sided printing for all print jobs.
    Go to start, devices and printers, right click the printer, left click printer
    properties, click on the finishing tab and check Print on both sides, (manually) apply and OK.
    To set the two sided printing for 1 job.
    From the application go to file, print, preferences, click on the finishing tab and
    check Print on bot sides, (manually) apply and OK.
    Disable the bidirectional support to see if that will make a difference.
    Go to start, devices and printers, right click the printer, left click printer
    properties, click on the ports tab at the top, uncheck Enable bidirectional support.
    If it didn't work then go back in and check it again.
    I would download and run the Print and Scan Doctor since it might resolve the issue
    automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    If that doesn't work then I would uninstall and reinstall the printer software.
    Uninstalling the Printer Software.
    Here is a URL to download and install the latest drivers again.
    HP LaserJet Pro M1212nf Multifunction Printer Drivers.
    Try the two sided printing now.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Smartforms output in Duplex mode

    Hello Gems,
    I have defined 3 pages and i had set all the pages to duplex mode.
    I need to print set of  instructions in my smartform output in duplex mode (front & back of page)
    Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
    Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
    Page INST : Does not has main window and next page is Page 2.
    My pages flow  in the following way:
    page1>Page INST>Page2
    Page 1 & 2 have main windows.
    I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
    with no INSTRUCTIONS at the back.
    when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
    Can some one suggest me ?
    Thanks
    Dan

    Hi,
         Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
    To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
    Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
    For more details please refer to the below limk
    http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
    Thank U,
    Jay....

  • Printing in TUMBLE mode not working

    hello,
    I have the problem that the TUMBLE mode does not work in my program.
    I have tested the printer with MS Word to be sure it works with my hardware and
    it succeeded.
    I use a DocPrint Object and specified the PrintRequestAttributeSet attributes OrientationRequested.LANDSCAPE and Sides.TUMBLE (=Sides.TWO_SIDED_SHORT_EDGE).
    If I change this to Sides.ONE_SIDED, the printer correctly prints each pair of sides on 2 papers (one-sided).
    If I change this to Sides.DUPLEX, the printer prints in DUPLEX mode correctly (TWO_SIDED_LONG_EDGE)
    If I change this to Sides.TUMBLE, it still prints in DUPLEX !
    If I use OrientationRequested.PORTRAIT, the printer prints always binding to the short side , like I need it (no matter if I switch to DUPLEX or TUMBLE).
    What could be the reason that the program ignores the TUMBLE attribute ?
    Here is my code:
    public static void doPrint(Print printData)  throws Exception {
                    PrintService printer = null;     
              printer = printerLookup(printerName);                         
              DocPrintJob job = printer.createPrintJob();
              DocFlavor flavor = DocFlavor.SERVICE_FORMATTED.PRINTABLE;
                    Doc doc = new SimpleDoc(printData, flavor, null);
                    PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
              aset.add(OrientationRequested.LANDSCAPE);               
              aset.add(Sides.TWO_SIDED_SHORT_EDGE);
                 job.print(doc, aset); //print
    }

    Yes, it's not a permission issue. And it only happens on this one machine too. No error messages in any of the log files. This is a real tough one. I'm tempted to think that it might be a graphics driver issue. The machine with the problem is a 2008 Mac Pro with a GeForce 8800 GT. So if anyone with a similar configuration could test it I'd at least have another hint for what's going on.
    As an interesting sidenote, other capture applications like Voila work fine, which makes the graphics driver theory unlikely, but well, I'm running out of possible causes.
    Thanks,
    Jazz

  • How do you set the Crystal Report Viewer Printer to Duplex

    Using the code below I can print in duplex mode, but this does not let me view a report before printing
    How do I set the Printer in the Viewer Control Bar of the Crystal Report Viewer to Duplex Printing programmatically rather than having to manually select Duplex through the preferences option?
    I have searched but the only example code I found produces errors in the code and will not run
    Private myReport As ReportDocument
    myReport = New ReportDocument()
    myReport.PrintOptions.PaperSize = PaperSize.PaperA4
    myReport.PrintOptions.PaperOrientation = PaperOrientation.Portrait
    myReport.PrintOptions.PrinterDuplex = PrinterDuplex. Vertical
    myReport.PrintToPrinter(3, False, 0, 0)
    In my VB6 Project that I am converting to VB.NET when I added Report.PrinterDuplex = crPRDPVertical, this allowed me to view the report and then print with Duplex without having to set the Print Preferences manualy
    I found 1386475 - How to set printer name and print job title at runtime using Report Application Server SDK for Visual Studio .NET
    But this causes errors
    Imports CrystalDecisions.ReportAppServer.ClientDoc
    Imports CrystalDecisions.ReportAppServer.Controllers
    Dim boReportClientDocument As ISCDReportClientDocument
    Dim boPrintOutputController As PrintOutputController
    Dim boPrintReportOptions As New PrintReportOptions
    Edited by: DavidMills on Feb 18, 2011 11:58 AM

    Hi David,
    You can mix both engines, just declare them both with different report object names. Here's all of my references:
    using System;
    using System.IO;
    using System.Xml;
    using System.Drawing;
    using System.Collections;
    using System.ComponentModel;
    using System.Windows.Forms;
    using System.Data;
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.Shared;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.ReportAppServer.CommonControls;
    using CrystalDecisions.ReportAppServer.CommLayer;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.ObjectFactory;
    using System.Data.OleDb;
    using CrystalDecisions.ReportAppServer.DataSetConversion;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportSource;
    using CrystalDecisions.Windows.Forms;
    using System.Data.SqlClient;
    using System.Runtime.InteropServices;
        public class frmMain : System.Windows.Forms.Form
            CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
    My file open dialog:
            private void btnOpenReport_Click(object sender, System.EventArgs e)
                rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
                openFileDialog.Filter = "Crystal Reports (*.rpt)|*.rpt|Crystal Reports Secure (*.rptr)|*.rptr";
                openFileDialog.FilterIndex = 1;
                 if (openFileDialog.ShowDialog() == DialogResult.OK)
                      btnOpenReport.Enabled = false;
                      btnSaveRptAs.Enabled = false;
                      object rptName = openFileDialog.FileName;
                    try
                        rpt.Load(rptName.ToString());
                        rptClientDoc = rpt.ReportClientDocument;
                    catch (Exception ex)
                        MessageBox.Show("ERROR: " + ex.Message);
                        return;
                    MessageBox.Show(rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString());
                        MessageBox.Show("Report opened.","RAS",MessageBoxButtons.OK,MessageBoxIcon.Information );
                        btnOpenReport.Enabled = true;
                        btnSaveRptAs.Enabled = true;
                    //MessageBox.Show(rpt.RecordSelectionFormula, "my record: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
                    MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
    As for the page number I use it off the Engine report object:
    MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
    And it works for me...
    Thank you
    Don

  • Not able to print in duplex

    On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
    Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
    How do I fix this problem?
    See screen print picture

    Hi,
    The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
    You may perform manual duplexng on Mac OS using the Pages to Print option as following:
    From the file used to print click the File menu and select Print.
    NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
    From the main drop does menu select Paper Handaling.
    The main menu will usually list the program name (e.g. TextEdit).
    Will appear as Copies & Pages within Microsoft Office applications.
    Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
    After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printing multiple copies of 3 page BOL in Duplex mode-

    Hi Gurus!
    I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
    At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then  again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
    Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
    Please suggest.

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

  • Printing on the A5 in duplex mode on the printer HP1606dn

    Good day! When you print on A5 format in duplex mode on the printer only prints HP1606dn second page - the printer does not return the page to be printed on the other side. When printing on A4 prints on both sides of the paper. Format settings before printing exhibited true. The problem is the driver? Installed Software 2012-10-17, Version 9.0
    Need help! FNX

    Don't know the answer, just a comment:
    The User Guide manual states:
    The printer driver only supports certain media sizes for automatic duplexing.
    Use the manual duplexing procedure for media sizes not available in the printer driver
    although it doesn't appear to say which sizes are affected! 

  • How to print a PDF document in duplex mode using command prompt?

    I want to print a pdf document in DUPLEX mode by command prompt.Already tried with /p and /t.

    Hello Ram,
    Please see this link - http://www.coolutils.com/Print-PDF-duplex-cmd
    ~Deepak

  • Printing SD Documents in DUPLEX mode

    Hallo,
    i have a big trouble. If i want to print all pages in DUPLEX mode (via change in SE71), first page is printed separately in SIMPLEX mode(all of these pages are set to DUPLEX mode).
    Standard attributes are: FIRST page then LAST page.
    Please help, thanks

    Hi,
    I don't know, but a weird guess is:
    Is it S/w-realeted issue or H/w-related..
    I think its printer-relaed.
    Contact with your Admin - SAP as well System, in company itself.
    Best regards,
    Amit

Maybe you are looking for

  • HP Laserjet 1022n Network installati​on WS 2008 R2 X64

    i'm setting up a new printserveron WS 2008 R2 x64 OS. I have a HP LaserJet connected to the network that i'm struggling with to install. Via http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4393​... I c

  • I found out issue distinct clause in query ,refcursor not returning rows

    URGENT hi the following procedure returns records  but when i add  distinct clause to (open v_refcursor for select ) i.e   open v_refcursor for select distinct column1,column2   .......... in the procedure the procedure is not returning records. plea

  • How to use own or other creditcard in Family Share?

    Hello together, i'm using the Family Sharing functionality(for example my dad set up the Family Share), great ideal. But now i want to buy an App on my own and do not want to use the Family-Creditcard but my own creditcard (sometimes i want to pay on

  • Best way to pull spark view nav out of mobilecomponents.swc?

    I would like to use the new view navigator code introduced in Flex 4.5, however it is important that our mobile apps share the same code base (mostly) as our web and desktop apps. Since these components were only included in the mobile build, what wo

  • Error when including JAR

    Hi all, I am getting this error when i try to include xbean.jar. The error is: The project was not built since its build path is incomplete. Cannot find the class file for javax.xml.stream.XMLStreamReader. Fix the build path then try building this pr