Print service error

Hello Everyone,
I am trying to print an image from from a jdialog . It compiles fine but when I try to run, the print dialog box appears from where I can choose a printer. But after that, nothing is printed. I tried to log the error and this is what I found:
java.awt.print.PrinterException: No print service found
Can anyone help me with this?
Thanks,
Riddhi.

HI:
I am trying to print an image from a printDialog . It compiles fine but when I try to run, the print dialog box appears from where I can choose a printer. But after that, nothing is printed. I tried to log the error and this is what I found:
java.awt.print.PrinterException: No print service found
The console show me this error :
java.awt.print.PrinterException: No print service found.
     at sun.print.RasterPrinterJob.print(Unknown Source)
     at sun.print.RasterPrinterJob.print(Unknown Source)
     at PrinterGUI.printMyJob(PrinterGUI.java:303)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.plugin.javascript.invoke.JSInvoke.invoke(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.plugin.javascript.JSClassLoader.invoke(Unknown Source)
     at sun.plugin.com.MethodDispatcher.invoke(Unknown Source)
     at sun.plugin.com.DispatchImpl.invokeImpl(Unknown Source)
     at sun.plugin.com.DispatchImpl$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.com.DispatchImpl.invoke(Unknown Source)
I found this fix BUG ID: 5024816 and Related Bugs 4930594 but my problem continue.
Can anyone help me with this?

Similar Messages

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer Services Error Can't align printer heads.

Can't find the toolbox to align printer heads. crooked lines. HP Deskjet D2445. Took off software and put it on again. When I select the "Printer Services" button it simply states, "Unable to perform the operation". I have a window's XP. Never had a problem before, but I didn't realize until just recently that the "align" printer heads prompt after inserting new ink carts. Hasn't come up for some time now. Any thoughts would be greatly appreciated!

Can you reply with your email address, but in the form of user_name at domain_name dot com (dot country if applicable). I have some files to send you to replace the Canon files that are possibly causing the error.
Also, for your reference, you posted in the Lion forum but you have Mtn Lion. If you posted in the Mtn Lion forum I would have got to you sooner.

79 Service Error Message on the LaserJet Pro 200 color M251 Series printer

I've been using this printer with the Mac OSX 10.9.4 OS for about 9 months.
I'm now getting a 79 Service Error message. I've tried to turn the printer Off and On several times to no avail.
Strangely enough, when I try to print a new document, a message keeps appearing on my computer, that says "The printer has been paused. Do you want to resume printing?" When I click the Resume button, nothing prints out.
The user manual says that the 79 Service error message is linked to a firmware problem? Do you know how I can fix this issue?
Many thanks,
Pierre
This question was solved.
View Solution.

Hi NebraskaPierre,
I see by your post that you are getting a Service 79 error on the printer. I can help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
This can be caused by malformed PostScript documents.
Please do the following:
Locate the on/off switch on the bottom of the printer.
Switch the printer off position and COUNT to 10.
Turn the printer on again and the system should be all set.
Try printing from another application to see if you have the same issue.
If a print job of yours repeatedly causes this error, it may indicate a problem with the print job.
Try breaking your document up smaller before printing it.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign, then select the printer from the list and click on the Add button.
(make sure it shows the printer name beside Use, not the Airprint driver)
Try printing again.
I would recommend to run a firmware update on the printer if the issue continues.
There are none on the website for the 10.9, but you can run the updates right from the printer.
Go to setup, services, Laserjet Update, Check for Updates now.
What are you trying to print and from what application are you using? (PDF)
Please provide in detail the results if you are still having issues.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Error 800f0922 when adding Print Services

I have two Windows 2012 R2 servers having the same problem. I removed the Internet Print Service from one of them to troubleshoot a problem and when I try to add it back I get an error that doesn't say very much. (Unable to complete installation. Error 0x800f0922)
I removed print services from a second non-production machine and have the same errors. I have run SFC checks as well as DISM health checks and there are no reported errors on either system.
Any guidance would be appreciated.
Update: I was able to get Print Services to reinstall by installing it separately from Internet Printing. Internet Printing still will not install.

Hi,
Regarding your description, I did a test on my Windows Server 2012 R2 environment.
I removed the internet printing service through the add roles and features function and then reinstalled the internet printing service back successfully.
Besides, I also removed the print services feature and then reinstalled it back with internet printing service installed. However, I didn’t receive any error on the above 2 tests.
So I’d like to suggest you to reboot the server and then have a try. If you still got errors, can you please check the event log, and send us the event log. In that way we can do a further investigate.
Best Regards,
Eliane
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

Print Service API Errors

Hi,
I am trying to use the new print services API's, I have a code example that will complie but failes at runtime.
I am using Wepshere develoment studio client for the Iseries (V4.00).
Can any one help me get this example running ?
Error Message >>
java.lang.NoClassDefFoundError: javax/print/PrintException
Exception in thread "main"
java.lang.NoClassDefFoundError: javax/print/DocFlavor
Exception in thread "main"
Example Code >>
import java.lang.*;
import java.io.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
import javax.print.event.*;
public class Print01
static FileInputStream psStream;
public static void main(String[] args)
try
psStream = new FileInputStream("file.ps");
catch (FileNotFoundException ffne)
System.out.println(ffne.toString());
if (psStream == null)
return;
DocFlavor psInFormat = DocFlavor.INPUT_STREAM.POSTSCRIPT;
Doc myDoc = new SimpleDoc(psStream, psInFormat, null);
PrintRequestAttributeSet aset =
new HashPrintRequestAttributeSet();
aset.add(new Copies(5));
// aset.add(MediaSize.A4);
aset.add(Sides.DUPLEX);
PrintService[] services =
PrintServiceLookup.lookupPrintServices(psInFormat, aset);
if (services.length > 0)
DocPrintJob job = services[0].createPrintJob();
try
job.print(myDoc, aset);
catch (PrintException pe)
System.out.println(pe.toString());
Thanks

Looks like a runtime CLASSPATH problem...
Try to include this code in your main, and check that the version is the same as the one expected:
System.out.println("JAVA VERSION IS: " + System.getProperty("java.version"));

Print Service -- Queue Log location

Hi,
I'm sure this is just a minor thing I should know, but I'm trying to find the individual Queue logs. In reading the OS X Server -Print Server Admin document, it mentions:
A print queue log records information such as the name of users who submitted
jobs, the size of each job, and errors associated with a job.
It then tells me how to view a Print Service log which only contains info on the Print service itself, but not how to view the individual Queue logs. I've dug around for the past 2 hours but cannot locate it. I'd really like to have a log of that info-- any help would be much appreciated.

I appears the nature of this question has changed a bit. I can't the queue logs because it appears my jobs are not being processed by the server.
Here's the deal. I have a 10.6 lab set up pointing to an 10.6 server. All of the lab computers are set up to printing, using the printers provided by my MCX prefs. When you print a document from the workstation, it processes and prints as expected-- however at no point does the server have this job appear in the queue.
I just want to see if there is something I've missed. I set up the server with the printers I want in my queue. I then added said printers to the list via workgroup manager. The workstations see AND print to only the printers supplied in workgroup manager. But it appears that jobs do not actually go through the queue-- it's almost as though they bypass the server and print directly to the printer. Is there a step I left out?

49 Service Error - Turn Off then On - LaserJet Pro 200 M276nw

I was adding to another post for a different printer but didn't want anyone with MY printer to MISS this problem.
***UPDATE*** (at least for my LaserJet Pro 200 M276nw)
I have found the root cause but will need further assistance from someone at HP to "solve" this one....
My new M276nw keeps throwing a 49 Service Error, chat support yielded alot of power off, power on, wait, try again blah blah blah, fuser problems blah blah. 10 minutes of forum searching put me onto possible wireless networking issues with other printers and SSID's. Anyway after returning one printer to Staples and having the problem come up again on a another brand new one....Tried Forum searching & Tada! at least I got to find a root cause.
I have a D-Link DIR-825 wireless router. It has dual band (2.4 GHz and 5 GHz).
Normally I have both enabled for the myriad of devices that people have these days in my home.
I updated the firmware to the latest update (20121026) then restarted.
Received the 49 Service Error shortly after restart.
Then I disabled both bands to test each wireless band independently.
The printer acted normally so I decided to enable each band seperately.
When I enable the 2.4 GHz band in the router, the printer immediately throws a 49 Service Error.
I tested this several times (5 to be exact) and each time during the router reboot the printer indicated the error.
So I left the 2.4 GHz band disabled and went on to the 5 GHz band.
I enabled the 5 GHz band 3 times and disabled it and found no effect on the printer (at least within a 5 minute window).
So now I'm left with only a single band wireless router or a printer that likes to restart itself every 20 minutes or so.
There is probably a setting (or 2) that can be tweaked in either the router or the printer that can prevent this (I hope).
I just need to find the right HP person............
This question was solved.
View Solution.

I really wish I could help but I am afraid this is a bit beyond my level of comprehension. What I took from this was, you have to turn off the duel band feature to get the printer to work without that error message, correct? The User Guide may help you but when I tried to read it my mind was blown away by just how many settings could be adjusted to fit your needs. No need to do anything troulbeshooting-wise just yet. All I need for you to do is look at page 137 on how to set sleep delay and auto power down functions and page 132 for link and duplex settings and let me know if you think it could be something to do with these.
As far as a setting within the router, I do not know. I did find another user guide with very technical information in it. The Software Technical Reference hinted to bi-directional printing which basically turns off or on the print spooler if the printer was so big it was using up network resources but I am not sure of that at all (see Page 59 for an example). Page 89 and on is a brief introduction to the embedded web server but really these are just definitions, nothing new to report there.
This website hints that it may be a firmware error. Lastly, the only other thing I can offer as you have probably seen it yourself is another HP forum thread regarding your exact error. I know I won't be of much assistance but some hopefully is better than none. I'm just glad it works partially. Let me know if I can answer any questions for you but this is just a step out of my league. Good luck!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Tip regarding the "systemd[1]: Failed to start Journal Service" error

Just a tip regarding the well-known
systemd[1]: Failed to start Journal Service
error (which I ran into last weekend) to maybe save one or two among you a couple of hours of your time:
The error is described here https://bbs.archlinux.org/viewtopic.php?id=151012 as well as in several other threads in other language boards / in other forums etc. It is usually (as in the linked thread) 'solved' by reinstalling the system - good old Windows magic, also useful when dealing with systemd.
The Problem with this error is that you do not get into your system. Instead, systemd will print you the mentioned "Failed to start Journal Service" error message a couple of million times. There are also no logs that you could retrieve (when booting from a livesystem) and that would give you any helpful hints, since journal is systemd's logging service, old-style system logs are not kept, and the dmesg log doesn't survive the reboot with default settings.
As pointed out in the above mentioned thread, you will see a few more instructive error messages when adding 'emergency' to the kernel line in the bootloader config.
Now there may be plenty of reasons why the systemd journal service might not work. The most common and most annoying, however, appears to be this one:
In this case you will see that the problem actually lies in
systemd[1]: Cannot open /etc/machine-id: No such file or directory
Now, 'man machine-id' reveals that "the /etc/machine-id file contains the unique machine id of the local system that is set during installation. (...) The machine ID is usually generated from a random source (...)". It is obviously perfectly justified to refuse to boot the system because an absolutely insignificant random number is missing. As far as systemd is concerned anyway.
Usually, it seems, the /etc/machine-id is set by /usr/bin/systemd-machine-id-setup during installation or system upgrade. It is not documented anywhere that this is a rather important step and that you should better check if this was or was not actually done before rebooting. Obviously (but for no apparent reasons) systemd fails to run this (or to run this successfully) sometimes.
Also to be recommended: Always retain (back up) your old kernel and initramfs and edit your bootloader config appropriately to be able to boot with your old kernel again ... just to have one or two options left to get back into the system in case of running into an unpleasant surprise from the side of systemd or other packages.
The solution is, obviously, to create this file /etc/machine-id ... You probably want to do that from a livesystem (if you want to try it from the emergency shell, you would need to remount / (i.e. root) as rw and hope that systemd will not punish you for that) by just running the program that was designed for creating this file manually: /usr/bin/systemd-machine-id-setup
http://permalink.gmane.org/gmane.comp.s … devel/7528 states that it might also work with merely creating the file 'touch /etc/machine-id'. Though I didn't try that since I had enough fun with systemd for one week and didn't want to break my system again just to see if that works.

Jristz wrote:
ackalker wrote:Sorry for necrobumping this.
Generating the machine-id in a consistent way is very important when working with KVM and containers, where the machine-id can be set for the VM or container. See `man systemd-machine-id-setup`.
Again, _don't_ just put some random UUID in there, especially not in the systemd package install script, this makes provisioning Arch Linux containers a PITA.
If you thing that the way that arch is handlynbg the machine-id is wrong or can be improved, then file a bug.
He already did.
Jristz wrote:Anyway, I thing if reinstalling systemd package or if systemd have a command to reinitialize the machine-id file.
Like so many of your posts, I had to read this a half dozen times before it made any sense. I think you're hinting at the utility that ackalker already pointed out in the post you're replying to. And, if you read the install scriptlet, you wouldn't need to think about whether or not reinstalling would be an option. You would know that it isn't.

I have an HP Laserjet Pro 200 Color MFP Getting constant error message: service error 79

The product name listed on back of the machine is : CF145A. I keep getting an error message " 79 Service error Turn off and Back On. I have turned it off and on several times but the error message will not go away and will not let me perform any functions.

Hi,
Try connecting the printer to your PC with a USB, then install the latest firmware using the following tool:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-6&cc=us&dlc=en&lc=en...
It should address a such and may resolve the described problem:
•Fixed a 79 error when printing certain documents.
If he printer stuck in such an error state, I would also suggest unplugging any cable form the printer first (such as a USB, Ethernet, Phone Cable, etc.). Then turn the printer off and turn it back on and check if the same error appear.
Also ensure the printer is directly connected to a wall socket and not through any power splitters, extensions or a surge protector and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaserJet Pro 400 M401dn - 79 SERVICE ERROR

We have only had this printer less than a year and I am getting a 79 SERVICE ERROR. I have power cycled, unplugged and all the normal tries... no go. It will print the menu map but will not accept a print job from a user. I try to get to the printer page on HP.com but it errors out so I cannot get to any of the support docs for the model. Anyone out there have a suggestion?

I ran into this same problem with the LaserJet M401dn. I noticed this issue occured when the printer was hooked up to the PC via USB. I followed HPs steps on trying to fix this problem and needless to say, their steps weren't worth a hill of beans. The printer is working now now via these steps that I'm going to list. 1) Restart the printer with only the power cord being attached. If you're STILL getting the 79 error service, then it is most likely a firmware issue. Luckily for me it wasn't. The printer started right up as it should.2) If your printer starts right up, attach an Ethernet cable from the printer to your router/switch/DSL or cable modem.3) Select the Network icon on your printer screen and check to see if your printer has authenticated to the network and lists an IP address. If you're on a home network the IP address will show something like 192.168.x.xx. 4) Once connected to the network you'll run a firmware update. Click on your Settings icon, select LaserJet Update, Check for Updates Now. Continue by selecting the update and download and install. After the firmware installs, at this point you might be able to get the printer to work by hooking the USB cable back up to the printer. I on the other hand did a couple other steps before hooking the printer back up. 5) I installed all of the Windows Updates (critical), updated Java6) Uninstalled the HP printer software for the M401dn and restarted the PC7) THIS STEP IS NOT FOR THOSE THAT AREN'T FAMILIAR WITH EDITING THE REGISTRY. If you have no knowledge of how to edit your registry, then PLEASE DO NOT ATTEMPT this. Have someone with knowledge do this step. I, nor HP can be held responsible for any mistakes that you make with this step. DO AT YOUR OWN RISK. In the registry I searched for Packard and deleted all Keys or entries that had M401 listed. DO NOT DELETE THE KEY IF IT DOESN'T LIST M401, as there are Hewlett-Packard printer drivers that are built into the operating system and they do show up in the registry.I ran through the registry twice searching for any sign of the printer driver being installed. Restart the computer again.8) Reinstall the HP LaserJet Pro 400 M401 Printer Series PCL6 Print Driver that is relevant to your PC. (Sorry, I don't know how to deal with Macs.) DON'T download the Full Software and Drivers or the one WITHOUT the installer. Don't use the disc to install the drivers either. Just download the most recent version of the software from HPs website. Install the software and attach the printer when asked to do so. Hopefully you're golden at this point just like I was! If for some reason this doesn't work for you, I would format your hard drive and reinstall Windows and all of your software. Apparently there is something within the registry or on your computer that is keeping the printer from working. I hope this helps you all out!

I can't go further "waiting for Printer Services" on Mac OS X 10.3 can U?

Evening, I'm a new user, and ocassionally use my iBook.I turned it on but it takes ONE HOUR to get to the prompt Waiting for Printing Services. I was advised to re boot but no success, I guess this all happened after i tried to update latest version.
I appreciate if you can help!!!

I am working on a friend's Ibook, I am a PC IT, and know very little about Mac's so please bare with me in helping (1st grade Mac user).
In my Mac fixing journey, I have used:
1. Repair Disk = no repairs found to fix
2. Repair Permissions = stalls and gives a prompt disconnected quit and restart, did that same prompt
3. Booted in safe mode, gets to the same point "waiting for Printing Services" and then fades out and shuts itself down after a long period.
4. I have tried to holding down opt, apple, p & r keys to reset "pram" = no go.
5. Removed the power source and batter to reset computer.
6. Booted computer connected into the printer and not connected to the computer. Same freeze place.
After all this being done,and reading alot in here, I purchased disk warrior, it corrected a few errors, rebuilt and rebooted...only to come back to "waiting for Printing Services" and then freeze.
Anyone have anything else they can help me with, that might get me passed this problem??
Thanks in Advance for any advice!!
Sav
Ibook G4 Mac OS X (10.0.x)

Print internal error when tring to print PPA document

Hello experts,
    We got a problem when we tried to print out PPA document in HR system using t-code PHAP_ADMIN_PA. The system always shows the message Error when printing: Internal error. And message no: HRHAP00_DOCUMENT160.
    I have searched the forum but I have no idea how can I check and how can I do to solve this problem. Can anyone help me?
    Any help will be highly appreciated.

Hi Joseph,
This error is usually linked to an incorrect configuration of the printer.
Please check the following notes for information on the type of printer supported for PDF
   685571 - Printing PDF-based forms
Check also your ADS settings (or install it if it's not already done as it is required for PDF as well).
The installation steps you can fbe found in ADS Configuration Guide:
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Once installed or if it's there already then please check the following:
Execute the ADS test program "FP_TEST_00" in your system, check whether form is being displayed once you specify the
printer name. Also, could you check in transaction SM59 the ADS status?
In order to print an appraisal form, you need:
1- the Adobe Document Services (ADS) installed and well configured
   on a J2EE engine in your system landscape
2- an appropriate connection called ADS maintained in SM59
ADS configuration guide is available on Help Portal.http://help.sap.com/nw2004s
-> SAP NetWeaver Library -> Technology Consultant's Guide ->Cross-NetWeaver Configurations -> Adobe Document Services ->Configuration.
Please also make sure, that ADS is used on a supported platform. You can check the Product Availability Matrix (PAM) for informationabout supported plattforms for ADS.Link: http://service.sap.com/pam
Notes: 863872, 925741 and 736902 Adobe Credentials
Hope the above will help you solve this error
Thanks
Sarah

How does one print to enterprise Windows print services in Yosemite? CUPS 2.0 problem?

One of my co-workers upgraded to Yosemite yesterday and it broke his ability to print to our corporate printing services (which are built around a Windows print server). Obviously, the printer discovery in the System Preferences can't find the Windows print server - that's never worked. However, we had previously been able to add a printer through the CUPS web front-end by adding a Windows printer and specifying an SMB URL in the format:
smb://DOMAIN;USER:[email protected]/QUEUE-NAME
... which worked like a charm in Mavericks. However, Yosemite has upgraded to CUPS 2.0.0 and this no longer seems to work. Print jobs enter the CUPS queue, but authentication fails and they are not accepted by the remote server.
I've consulted the CUPS 2.0.0 documentation, and there's not really anything helpful there. In fact, there's no mention of SMB / Windows printing at all in the 2.0.0 documentation. Unfortunately our campus print services does not support IPP, LP, LPR, or JetDirect as options -- just Windows printing.
Does anyone have a suggestion?

Just finished testing 10.10 printing via a Windows 2008 R2 print share. I also found that when trying to add the printer using CUPS I would get an authentication error. But if I added the printer using the Windows section of the Add printer pane, then I was able to print fine.
So with you mentioning that using the Windows section of the Add printer window has never worked (which is interesting because it's always worked for me) I want to suggest another approach to adding the printer, still using the Add printer window. With this window open you can right-click on the toolbar and select Customize Toolbar. You can then drag the Advanced icon to the toolbar. Then when you select this, you can set the Type menu to "Windows via spoolss" and then enter the URL as smb://servername/sharename. Select the supporting driver and click Add to complete.
Then when you select to print for the first time using this printer you will be prompted to authenticate. Enter the account details, set the save to Keychain option and OK to send the print job.
This worked fine for me and creates the same queue as using the Windows add printer setting. Curious to hear if this gets your co-worker printing again.

Print service error

Similar Messages

Maybe you are looking for