Print size problems with Epson R3000 and Mountain Lion

I am using Mountain Lion on a 2008 MBP and an Epson R3000 printer.  I can not get prints to size to my paper.  In aperture I am choosing custom since there is no option for 11.7X16.5.  I have set the print size to the same and still it does not work.  I tried both landscape and portrait but that did not work. 

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Similar Messages

  • Mouse problems with Illustrator CS6 and Mountain Lion

    The mouse in Illustrator selects and deselects as it moves over buttons and cells:
    1. In Graph data the cells the mouse passes over go dark grey if not already selected, then deselect if they are selected. This makes it very difficult to use the data cells.
    2. In Layers window, where I may have 100s of layers, I want to hide one layer or more which are not necessarily adjacent to each other. Illustrator hides all of the layers it passes. It is very difficult to click and unclick the show/hide button (and also the lock button). Ditto with show or unlock toggle layer. I had to start up in Lion in which Illustrator does not have this problem in order to get a job finished in time.
    Seems there needs to be a fix for Illustrator to work properly in Mountain Lion.
    Has anyone found such a fix?

    No I don't have Right-Zoom (don't know what it is), but I have the same problem with Apple's Track Pad, which I don't use much and I only use the inbuilt software.
    I use Kensington Slim Blade and before that LogiTech's marble mouse and both need their software to work properly.
    All of them work fine in Lion and earlier. Could it be that Adobe has overlooked some new aspect that’s in Mountain Lion which, in my case, needs to be fixed for Illustrator?

  • Driver Problems with CanoScan 9000F and Mountain Lion?

    I have recently taken delivery of a MacBookPro with Mountain Lion. I used Migration Assistant from an older MacBook and all seems to have gone well except for my CanoScan 9000F. This refused to load the MP Navigation software, even though I downloaded the latest drivers. I am a heavy user of the Scanner as I move towards a Paperless Office .
    Does anyone have experience of this combination of Scanner and Lap Top? Thank you.

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Anyone having printer problems with adobe cs5 and mountain lion

    I can print one copy in adobe cs5 but if I hit the print button it shuts down the program.  Anyone having this problem besides me?

    Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Problems with connection to the Mountain Lion

    Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.

    Have you tried to reset your network settings ?
    What I would do is delete the connection, and then retry the set up of that connection.
    System Preferences>Network, select Wi-Fi on the left and then click on the 'minus' button

  • Does anyone know of any issues with photoshop CS4 and Mountain Lion?

    Does anyone know of any issues with photoshop CS4 and Mountain Lion?

    See here:
    http://www.macrumors.com/2012/07/25/adobe-and-avid-report-only-minor-issues-with -mountain-lion/

  • Isolated dual boot with OS mavericks and mountain lion

    I just created a dual boot between mavericks and mountain lion (1 physical drive with two partitions) but I'm having troubles where they each see each other.  Bin/ lib/ etc are fine (i think) as they are added via environment vars but it seems as though the spotlight privacy directories are shared.  For instance, I thought I could simply add the other partition to the Spotlight Privacy list, ie while using mountain lion add /Volumes/Mavericks to the privacy list.  However, when I added the volume in one, it also appears in the other.  Another issue I've encountered is that while compiling on ML, I was getting errors complaining about the 10.9 sdk.
    So, can anyone advise on the proper way to isolate these two operating systems with a dual boot scenario?
    Thanks
    Adam

    Create two partitions on the hard drive. Install each OS on its own partition. This will only work if the computer can be booted from either version.

  • Major printing problem with Epson R1800 and 1.5

    I have an Epson R1800 and Aperture 1.5
    Any page that I try to print borderless has a quarter inch border around 2 edges. I've tried to calibrate but the two borders are way outside what the calibrate option can deal with.
    This happens on all paper sizes. There is no option that I can find anywhere to fix this.
    Every other app prints just fine, including iPhoto. It seems limited to Aperture.
    Thanks, Bill

    Behold the power of asking a question.
    It fixed itself.
    I have no idea how or why. But after 3 hours of working, it fixed itself in less than 5 minutes.
    Thanks, Bill

  • Problem with Epson WF600 and Mavericks printing

    My Epson WF600 no longer is recognized wirelessly, by my Macbook Pro, when I go to Add Printers in my System Preferences. I installed the new Drivers for Epson (I think), but unless I connect the printer with a USB cable, my laptop wont print wirelessly from the Epson. Please help.

    Try resetting the router (power off 15 secs, then back on), then reset the printer same way.
    Also reset Printing System:
    OS X Mavericks: Reset the printing system
    How did you install new drivers?
    The new driver paradigm for OS X is: manufacturers give Apple the current drivers to keep on their servers. It gets installed automatically when we add the printer in Print & Scan prefs. You can force OS X to re-find both installed and available drivers by resetting the printing system.
    Find current version of drivers from this:
    OS X: Printer and scanner software available for download

  • Experience with Epson R3000 and PS CS6?

    Just got recently an Epson R3000 inkjet printer and bought the Creative Suite and tried today some print outs on sheet and roll paper...
    Has anyone also experienced that printouts are larger then set in the print dialog?
    Depending on the paper size the print outs come larger around 2 - 5%...which isn't nice if I want to fit a photo to a specific frame size (o;

    Click on edit/preferences/file type associations and change the default program.

  • Canon iR7105, iR-ADV9065 with GX300 server, and Mountain Lion

    I am having no luck setting up two relatively recent, large and expensive Canon printers in Mountain Lion. The situations are different so there are two chapters to this wall of text.
    This is a fresh Mac, so it didn't have any 'old' Canon driver trash on it. I have installed UFRII 2.43 and PS 3.60 from Canon and restarted.
    The iR7105
    The iR7105 doesn't show up automatically in the Print & Scan add-printer menus. No problem; I go to IP, using LPD, and set it up there. (LPD access is enabled in the printer.) After that, I have tried setting it up with each of three drivers: a nondescript Canon iR7086-7105, Canon iR7086-7105 PS (US), and Canon iR7086-7105 UFR II (US).
    The nondescript driver results in no setup options for the printer, so I know there's  a problem. This is, however, the closest to a successful setup I have so far. In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of  finisher it needs to talk to? Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past). However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
    So I try to set up the PS driver. Now I get setup options and I can select the saddle finisher model. I also get a popup asking about unidirectional or bidirectional; I choose bidirectional because the printer is on a network. Also, setting it to unidirectional doesn't change what happens next:  when I do send the print job, the printer cheerfully spits out a dozen or more pages of single-line garbage instead of what I sent to print.
    On to the UFR II driver. Again I get setup options as expected when I set up the printer. Again, the print options are exactly what I expect as well. Unfortunately, the print job doesn't go through: I get an error that says, "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information." Well, the printer is pretty certainly connected, based on the performances above. It's also supported, if Canon's suggesting I should download and use this driver is any indication. Finally, Printer Utility gets printer information that looks quite accurate. Nevertheless, after all of that, actual attempts to print still get the UFR II Printer Driver error message, and no prints.
    The iR-ADV9065 and its GX300V2.0US server
    After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
    Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
    What would be awesome now would be to know what software I need to reinstall. Since I just installed the UFRII and the PS software on a fresh Mac, I'm not sure what's missing.
    So, back to manually installing with the IP address. From this point forward the results mimic those above, with variations for the printer's specific capabilities. The best driver option is still the non-PS, non-UFR version, and that 'best' option still won't control the finishing units. I must go through Command WorkStation to accomplish that.
    Bottom Line
    Because I am so close to having these set up properly, but not quite, I feel like I must be doing something wrong. Something small and subtle, probably, but hey, maybe it's something big and glaring! Can anyone help?

    mapinoregon wrote:
    The iR7105
    The iR7105 doesn't show up automatically in the Print & Scan add-printer menus.
    The Canon print controllers do not support Bonjour, so using IP > LPD as you have done is the correct procedure.
    mapinoregon wrote:
    The iR7105
    The nondescript driver results in no setup options for the printer, so I know there's  a problem.
    There's no problem. This is how the PPD works on 10.8. For older versions of PPD it was necessary to configure the options. But with the latest versions of PPD, it is assumed that all options are available, even when the machine may not have them or supports them.
    mapinoregon wrote:
    The iR7105
    In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of  finisher it needs to talk to?
    It is not a lack of being able to set what finisher you have installed. You just cannot saddle-finish with the PPD. This is only supported with the full driver, such as the UFR2 or PS, because you need the additional plugins that are included with these full drivers to get the additional functions.
    mapinoregon wrote:
    The iR7105
    Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past).
    Again, this is due to the lack of a plugin to support the submission to the mailbox. So it is another limitation of the PPD.
    And with you sending the print job to the mailbox in the past, you would have been using a full driver - not the PPD - to achieve this.
    mapinoregon wrote:
    The iR7105
    However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
    If you can connect to the iR7105 with Command Workstation, then you must have a Fiery connected to it, such as the imagePASS-S2. So this would explain why the UFR2 and Canon PS v3.60 driver did not work. The Fiery does not support either driver. They are for the iR7105 that is using its internal Canon controller. Not the optional imagePASS (Fiery).
    Now the issue for you with the imagePASS-S2 is that no 10.8 driver exists - the iR7105 was released in mid 2006. So you will have to use the Fiery Express driver, which has limited functions but it is better than using the Generic Postscript driver.
    mapinoregon wrote:
    The iR-ADV9065 and its GX300V2.0US server
    After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
    Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
    Like the iR7105 with the Fiery attached, the GX300 connected to the ADV C9065 does not support the UFR2 or PS v3.60 driver. But at least there is a 10.8 driver available for this model. Here is a link to the GX300 page from Canon USA.
    Now with this driver installed you can add it by selecting the "Canon iR-ADV C9000s GX300V2.0US" that appears in the Default Add Printer view (and the Nearby Printers window). The driver should be automatically found by the Mac, meaning the Use menu will be set to the correct driver. This will let you print and use most finishing features of the iR ADV C9065.
    Hope the above helps you. Reply if you need more info.

  • Hanging problem with Adobe CS6 in Mountain Lion

    I recently upgraded my retina Macbook pro to Mountain Lion and was having some trouble with Adobe CS6 apps hanging on startup among other things (including iCal crashing on startup)
    I did a clean install of Mountain Lion and Manually rebuilt my applications folder so that Adobe MAster COllection was installed freshly on a clean install of ML.
    Now it is still sporadically hanging when I try to open Photoshop, Bridge or other Adobe apps. The only thing that seems to fix it is a restart which is inconvenient when you're in the middle of work.
    ANy ideas?

    Thanks for this. I had heard of the fonts problem some people have had. All my fonts were freshly installed by either the system or Adobe when I installed Master Collection. Following your advice, I just verified every font and the only problem that showed up (as you had predicted) was a minor duplication which I corrected. So, it seems unlikely to be the fonts.
    As for your other point, I have been using Final Cut Pro X and that has worked fine. The only other app that has given me trouble has been Calendar which seems to get strangely stuck sometimes while it is updating. Makes me wonder if there's something going on with the network I'm using. 
    One thing I hadn't thought of was that it could be a problem with gfx card switcher. This seems unlikely but I'll try disabling it and see if that helps.
    Weirdly, today when I had this issue, Photoshop loaded up ok but then hung when I tried to load any file into it. Bridge wouldn't start at all. I didn't try the others. Yesterday I was having problems with Illustrator.
    Anyway, I see what you mean about it not being a widespread problem - which is why I started this thread. It seems no one else is having any issues. If anyone else knows what I should look for in my configuration please let me know.

  • Flash Problem With Safari After Downloading Mountain Lion

    I'm getting a persistent "Shockwave Player Error" when launching or resetting Safari . . . posting here because I upgraded from Snow Leopard directly to Mountain Lion and that's when the problem began.  I have a circa 2010 Macbook Pro with 2.2 GHz Intel Core 2 Duo, with OS X 10.8 and Safari 6.0.  I have attempted fixes in earlier threads (mostly regarding the same exact problem when upgrading to Lion), such as uninstalling Flash and reinstalling the latest from the Adobe website.  Also tried (temporarily) disabling plug-ins to see if it's flash-driven.
    This is the thread with the similar problem ... the error message displayed is the exact message I'm getting here ----->  https://discussions.apple.com/thread/3222853?start=0&tstart=0
    Thanks for your help. 

    Maybe the solution you are looking for is this:
    System Preferenes > Network > Wi-Fi or Ethernet (whatever you're using) > Advanced > Hardware > Set 'Configure = Manually' > Change 'MTU = Custom' = 1380

  • Problem with different calendars under Mountain Lion

    I upgraded recently from Snow Leopard to Mountain Lion and experiencing an annoying problem with the calendars "On My Mac" (I am using a MacBook Pro from mid 2009). With iCal under Snow Leopard I had seven calendars - Meetings, Performances, Family, etc. with different colors. After the switch to Mountain Lion these categories aren't maintained properly. Four of them have been seemingly merged into two, so that for example an event can't be categorized as "Family" but gets shifted automatically to "Meetings" (both calendars stay checked in the editing panel, but only one "sticks"). So I have three  calendars I can use and a four I can't.
    If I try to add a new calendar it appears in the list, but no event can be assigned to it.
    Is there a limit to the number of calendars one can have?
    I don't use iCloud, so there is no issue there.
    I have one Google calendar (a work schedule I have subscribed to ) which also works with no problems.
    Any ideas?

    Same problem when reseted  the PRAM.
    I read some Chinese Web , Many people got the same problem after upgrade to mountain lion
    you can see the locked icon show in the bottom left conner even my card is unlock
    I can read but can not delete any Photos
    http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23227AM .png
    you can see the locked icon show in the bottom left conner
    But I can edit everything in my Harddisk
    http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23235AM .png
    External Hard Disk no locked icon show in the bottom left conner
    http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23220AM .png

Maybe you are looking for

  • Retrieving values from a table

    Hi all, I need to retrieve values from CSKS-KOSTL for values containing the pattern entered by the user. For example, if the user enters 1, need to retrieve all the KOSTL values starting with 1. But when i write a SELECT statement mentioning where ko

  • XMLReader throws "Invalid UTF8 encoding." - Need parser for ISO-8859-1 chrs

    Hi, We are facing an issue when we try to send data which is encoded in "ISO-8859-1" charset (german chars) via the EMDClient (agent), which tries to parse it using the oracle.xml.parser.v2.XMLParser . The parser, while trying to read it, is unable t

  • Displaying a report with 250 000 rows in BI Publisher 11.1.1.6 == very slow

    Hi, I try to display a report with 250 000 rows in bi publisher 11.1.1.6. Running the SQL Request in TOAD take 20s. From bi publisher 11.1.1.6 this operation take more than 2 hour without result. The temp file show an xml file which increase (53 M to

  • How can I add bulks of web sites to a certain existing source?

    Hello, we administrate web sites in a database application and we like now to sznc the list in this application with those inside oses for a certain exsisting source. So we need either to knwo how to bring bigger lists of web sites into oses via the

  • Email Button w/ Variable Subject?

    For feedback, I have been using buttons set up to "Send e-mail to" with an address of [email protected]?subject=SubjectDescription etc. This works fine but it would be of service to students, and considerably easier for me, if I could have the subjec