Print subforms in different Order

Hi, I have a template with several subforms lets say A,B,C and D and sometimes the field definition file will have the info for A and B subforms, or could have the info will have info for B,C and A subforms (in that order), when the info comes in the order the subforms are created, I have no problem, the problem comes when the order of the info comes different. Any help on how to handle this will be appreciate it.
Best Regards.
Gustavo

Hi Gustavo,
maybe some more technical detail about your template definition would be useful.
In general there should be no problem with that, because subforms are triggered while scanning the input data. When a field is found, the corresponding subform is printed and it is filled with subsequent fields until a subform-external field is found (in this case the other subform is printed), or a field of the same subform is found again (in this case another instance of the same subform is printed).
This is accomplished using "^field" commands in the field-nominated file (data file), and a dynamic document.
Hope this help. Regards,

Similar Messages

How to print Checks in certain order than by Vendor Numbers?

We need to print certain batch of checks in different order than SAP standard(Vendor Number), is there anyway to make SAP to print them in different order?
Thanks in advance for the assistance.
Points will be awarded.

hi Frank,
Banking>Outgoing Payments>Checks for Payment . From that window you can access the print layout for checks and customise it to suit your requirements.
or,
If you are using SBO 2005, I would recommend going to Banking > Document Printing... See help details as pasted below.
Prerequisites
The following definitions are set:
· The required parameters in Administration > System Initialization > Print Preferences >Per Document tab >Checks for Payment option
· The print-related parameters for each house bank account in Administration > Setup >Banking >House Bank Accounts.
Procedure
1. Choose Banking >Document Printing.
The Document Printing Selection Criteria window appears.
2. In the Document Type field, select Checks for Payment. Enter all other parameters and choose OK.
The Print Checks for Payment window appears.
3. All checks are selected by default. Deselect checks that you do not want to print.
4. Ensure that the Next Check No. is correct. Change it if necessary.
5. Load the printer with the correct check pages or blank paper. Then choose Print.
The Check Number Confirmation window appears.
6. Collect the printed checks from the printer and compare them to the checks displayed in the window.
7. If the numbers assigned by SAP Business One do not match the printed checks, you can change them. Correct the number of the first check and press TAB. The following check numbers are updated accordingly.
Only checks with successive numbers issued by the same account will be updated accordingly. For example, if you change the check number from 999 to 2000, check numbers 1000, 1001, 1002 and so on will be updated to 2001, 2002 and 2003.
If the check numbers are not successive, you must correct each one of them manually.
8. By default, the status of all checks in the window is confirmed. Change the status if necessary.
9. Choose Update or OK.
Result
The numbers assigned to confirmed checks are marked as used.
The Next Check No. field in the House Bank Accounts Setup window is updated.
Check numbers used for overflow printing are marked as voided.
Checks with the Unconfirmed status are marked as printed, but the numbers assigned to them are not marked as used.
hope this helps u.
cheers,
Hema.

Is there a way to order printing between two different documents?

I have two different documents that need to be printed in a certain order. 1st document, 1st page ----> 2nd document, 1st page---->1st document, 2nd page---->2nd document, 2nd page---->ect.
Is there anyway to get it to print without having to merge? I have about 15 sets of 2 pairs of documents that need to be printed like this.
I also need to stamp every single page in the same spot with a signature. I am still doing research on how to do it efficiently but any recommendations would help alot.

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
 Cheers, Tom

Purchase order print out is different

Hi Experts
When i preview the purchase order and print, it print correctly in one page but i have setup three copies in the layout but it prints only one copy. But when i print it directly it prints three copies but the font sizes are bigger and margins are also not the same as preview so it jumps into many pages.
How can i rectify this problem ???
Thanks & Regards
Kanishka Wickrama

Hi...
Yes i did that, but why the when i print in two different ways the font sizes and everything is different ?
Thanks & Regards
Kanishka Wickrama

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

I want to order prints from two different albums but don't want to pay shipping twice?

I want to order prints from two different albums but don't want to pay shipping twice- How do I do this?

Select all the photos in both albums and order - or make a temp album containing all photos you want to order prints of and select all and order
The easiest way is the second suggestion -- make a temp album containing all of the photos and select all
LN

Suppresing Delivery note prints for certain sales order types/item category

Hi
I need to find a way of suppressing some delivery notes from being printed.
Relating to orders for consignment fill up and consignment issue.
The delivery notes are needed to be printed for 'Consignment fill up order' type, BUT not for Consignment issue - as this is confusing some of the warehouse staff at month end.
All have the same delivery type, the only difference i can see is the item category types are different
Is there a way i can use the sales order type, with customer number as an access sequence for the Output type ?
- Or the Item category type ?
Is it possible to add sales order type or Item category into the FIELD CATALOG :- output for deliveries
Your help would be much appreciated
Cheers
Tony

Hi,
I can suggest you something, but do remember that I've never done such kind of thing till date.
>> Copy LF and create new delivery type
>> Assign this to your consignment doc. types
>> Kindly remove the Header output determination procedure assigned to this new delivery type
>> Then assign output det. procedure at Item level {according to Item category}
>> Then check if will cater to your requirment or not.
Please keep one thing in mind that I am giving you a proposal by thinking in one logical way and I can't confirm the practicality of the proposal.
Hrishi

Not able to see Print Preview of Purchase Order.

Dear All ,
                                                                   I m not able to see the Print preview of Purchase Order , as the P.O is well release , but as i m click on Print Preview , an info displays in task bar , -> " Error in OPEN_FORM for document 4501472103
Message no. ME142
Procedure
Report the error to your system administrator.
I request you to pl help how to fix this problem.
Rgds,
sap11

thanx for your support , here i need to know one thing that i had gone to MN06 to display the cond. record , here for the output type i m using in P.O
Given below different key comb. are maintained for same p.o , but as p.o was created then in message tab the first combination of fax was displayed and for this combi when clicking on print preview the message came for " Error in open _form " .
1) P doc type / P. org./ Vendor = Medium = 2 ( fax) / Date / time = 1 , is maintained
2) P Doc. Type / P.org / Pgrp = Medium = 1 / date/ time = 1 is maintained.
3) P Doc. Type / P.org =         Medium = 1 / date/ time = 1 is maintained
4)P org.                        =         Medium = 1 / date/ time = 3 is maintained
Here my querry is that as medium = 1 ( print output ) is also maintain then why Other comb, were not triggered , why only Comb. for medium -=2 ( fax ) was trigered , and after that as i changed the medium to 1 , i m able to see print preview , why ?
why i m not able to see p prwe for medium 2 ?
Thanx n rgds,
sap11

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

Printing Report in same order as Paycheck Run (Important)

Hi,
For one of my current project's, the requirement is to the print a Salesman Incentive Paycheck Report in the same order as the paycheck run.
The report is needed in order to show the sales personnel which incentives they were paid on their paycheck. The report should print page per salesman ID and name.
How do you make the report print in the same order as the paycheck run?
Points will be rewarded to helpful answers, and all answers will be greatly appreciated.
Thanks, John

Ah, yes I know that.
It is the order of the output of the queries that is different. The result of Query 3 appears first, two second and reults from query one last.
Strange.
Edited by: user576781 on Feb 28, 2012 10:10 PM
Edited by: user576781 on Feb 28, 2012 10:10 PM

Prints received out of order

Is it normal to have Apple ship your printed photos (4x6's) in a different order than what you sent them from iPhoto as? I spent some time carefully arranging the photos in my album so that when I received the printed photos they would already be in order, ready for inserting into my photo album - alas, when I received the photos they were in completely random order, and not even date/time information anywhere to help me, not even on the index print! I had to spend just as much time arranging the photos in chronological order using my iPhoto display as a guide - it was time-consuming and frustrating! Is this to be expected when ordering prints from Apple, or should I make a complaint/comment?
Flint

I'm guessing that the uploaded files were arranged by the default alphanumerical order that the Finder uses. For future orders you need to arrange them in the order you want, batch rename them sequentially and then export to the desktop using the Use Title Option. Then, you need to manually add a zero to the first nine photos, -1 to -01, etc., so they will be listed in the correct order. Those are the files you'll need to upload for printing. Yes, it's a lot of extra work.
OT

Attachment printing along with Work order

Hi all,
i used search functionality..but I couldn't able to find any solution to solve my issue.
I have one requirement with my client...
They attach some documents(Picture or word docs etc...) to Maintenance order through attachment funtionality whcih is available in the left side of the screen on the top.
This attachments they want print automatically along with Maintenance order when ever they want.
Any one come across with these kind of requirement...pls through some ideas on this.
Will award good points for solution

Hi,
This will be a custom development (telling windows to print a document). In the past I created this based on SAP DMS, but the same can be done based on the object linking you mention.
Please take care that this will not work properly with background processes. Also windows printer can be different from the SAP printer.
Regards,
Paul

Report (summary) to print in the same order as the PAYCHECK run.

Hi,
I have a requirement where an incentive pay summary by salesperson, will need to print in the same order as the checks that print for those salespersons.
Is this possible and if so, what is required to accomplish the above requirement?
Thank You,
John

You can't change them once they are in the Photos app. On iOS 5 the photos will be sorted by the photo's 'date modified' field (from here) - so you will need to modify that field on your photos before syncing to get them into your required order. Or you could consider using a third-party photo management app instead of the Photos app e.g. Photo Manager Pro which allows you to re-order photos directly within the app.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

BAPI_ALM_ORDERHEAD_GET_LIST to select two different order at a time (urgent

hello all ,
Using BAPI_ALM_ORDERHEAD_GET_LIST i want to select two different orders at a time . As we do in IW38 using select single vaules(1) .
i want to know how to pass the selection .
Up to know i have tried like this :
FIELD_NAME                     S OP LOW_VALUE
OPTIONS_FOR_ORDERID            I EQ 500460
OPTIONS_FOR_ORDERID            I EQ 500400
But i am getting only the first order . But i want both order numbers .
So please help me on this .
Thanks are regards ,
Prem

Just for information. The following IT_RANGES fields map to the IW38 checkboxes at the top of the selection-screen:
SHOW_DOCUMENTS_IN_PROCESS      IW38 - Outstanding (CRTD)
SHOW_OPEN_DOCUMENTS                  IW38 - In process (REL)
SHOW_COMPLETED_DOCUMENTS       IW38 - Completed (TECO and CLSD)
SHOW_HISTORICAL_DOCUMENTS       IW38 - Historical
If you want to select TECO/CLSD orders, then you would use the following in IT_RANGES:
SHOW_DOCUMENTS_IN_PROCESS      I EQ
SHOW_OPEN_DOCUMENTS                  I EQ
SHOW_COMPLETED_DOCUMENTS       I EQ X
SHOW_HISTORICAL_DOCUMENTS       I EQ
As you then said, you need to filter out the CLSD statuses using:
OPTIONS_FOR_STATUS_INCLUSIVE I EQ TECO
I suspect this would be a more efficient way of selecting the data, but you'd need to check.
PeteA

Print subforms in different Order

Similar Messages

Maybe you are looking for