Print table

i have table in rtf format i want to send it to crystal report to print it
but it is appears empty
please help
(use crs for vs2010)

Hello,
CR can not read the individual parts of an RTF file, it inserts it as an OLE Object. Get your data into an Excel Spread Sheet or other source and then use it as your report source.
Don

Similar Messages

  • Smartforms  how to print Table rows on to the next page automatically

    if this question is answered pls point to the the link
    SMART forms:
    layout :  Half of my A4 page is filled with templates, a small portion is footer, the middle portion is Table.
    Note: i have set the condition for the footer as (tick the check box) "only after end of main window"
    Output:
                       the template is displayed the table is populated on the first page, no footer on 1st page,
                    on page 2 the table rows are printed (table rows were a lot) and finally footer got printed every thing as per normal
    what i want is:
                     instead of the table lines printed in the middle of page 2 (bcz my main window table is in the middle, top is templates)
                     i want the table lines (after filling the main window table lines in the 1st page) to continue to print from the
                     top of the page on page 2 and immediately after the table rows finish. footer must be printed....
    what should i be doing to get this output

    dear bob,
    yes i have done that already as u said, when i do it......
    i created a new page (next page) directed first page to next page
    on the next page my layout is like below
    removed all the templates dragged the main window to the top of the page...... 
    when i check the result, there is an empty line as the first line in the table (2nd page)
    and also the footer (again a template) on the first page, which is ticked as ( print after end of main window) is NOT displaying.

  • Printing tables takes a long time

    Hi,
    I am using the printerJob.printDialog() to print tables (I implemented a print method).
    The problem is that when the table has many entries printing takes very long time (printing table of 100 entries might take a couple of minutes).
    I am using the SwingWorker when printing in the following way:
    final SwingWorker worker = new SwingWorker() {
        public Object construct() {
            try
                PrinterJob printerJob = PrinterJob.getPrinterJob();
                printerJob.setPrintable(printable);
                if (!printerJob.printDialog())
                    return 0;
                NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.WAIT_CURSOR));
                printerJob.print();
                NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
                JOptionPane.showMessageDialog(NMSMainWindow.getInstance(),  "Printing completed successfully", "Print", JOptionPane.INFORMATION_MESSAGE);     
            catch (PrinterException pe)
                pe.printStackTrace();     
                NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
        return 0;
    worker.start();My question is: Is there a way to send a print job in the background, but in the meanwhile, while it is being processed, keep on working?
    Thanks,
    Efrat

    Edit init<sid>.ora
    and add the following line
    _fast=true
    Seriously, you need to run the normal selects to find out 'what it is waiting for' and/or run statspack.
    Information about this can be found on the websites you so far avoided to use.
    And Cost Based Optimizer is not supported for SYS in 8i.
    Sybrand Bakker
    Senior Oracle DBA

  • Dot matrix printers Capable of printing TABLE lines In Smartforms

    Hey guys,
       we are using EPSON LX-300+ (dot matrix pritner)
    but the problem is,
    it is not able to print table lines present in a SMARTFORM..
    it can print the same table lines presnet in SCRIPT ...
    so i want to know,
      all the dot matrix printers in the market...
    that can print table lines in SMARTFORMS...
    (pls suggest the DM printers u are using and dont have this problem..i.e unable to print table lines in SMARTFORMS)
    thank you...

    Hi Sreesudha,
    I have used three different line types for the main window.
    LTYPE1(Header) : For printing the column heading along with the title for consignor address.
    LTYPE2(Main Area) : For printing the line items detail. For the first line, I have to print Material Description and chapter Id and if the same    material exists for the second line item, then it should not be printed, so I have written condition for not printing it.
    LTYPE3(Footer) : For printing the footer with the net and gross weight details.
    And for paragraph format, I have used the custom Para. Format only.
    Suggest me ASAP.
    Rgds,
    JK

  • Print Table data

    Hi all,
         I want to print table data. I came up with couple of solutions like export to excel , printversion and adobe forms.
    We do not want to go for Adobe forms.  My concern in case of excel and print version is I want the logo also to be printed as the heading when printing this table data.
    please suggest me a solution where in I can print table data as well as the logo on top of the data.
    Thanks in Advance.

    Hi,
    You can print the Logo with the data using the adobe integrated with u r webdynpro application.In this case you need to create UI element interactive form in your webdynpro application and integrate the form with it.This form can be designed based on your requirement.For eq.logo on the top of the page .
    Thanks and regards,
    Amita Gupta

  • I want to creat a "print table" link in my document...

    I am creating an interactive pdf document in InDesign. I want people to be able to click on a link to "print table". Someone in the InDesign forums said I would have to use Acorbat to do that and that I should post in these forums.
    Is this something I can create using Acrobat? Could someone give me an idea of how I would do that, and how it would work in terms of my InDesign document?

    The closest you can get to that is a button that prints just the page the
    table is on.
    But if your users use Acrobat (ie not Reader), then it's possible to create
    a script that will print the page the table is on, with only the table on
    it, but that will require a bit of scripting knowledge.

  • Print Table all Line

    Hello:
    I want to use all line printing function to print Table, because the print control function can only print visible, so could you tell me how to realize all the lines of print Table?
    Thank you

    GetNumTableColumns
    SetCtrlAttribute with ATTR_NUM_VISIBLE_COLUMNS attribute
    Generally speaking, when seraching for a function or an attribute of a control you can right-click on the control itself and select Control Attributes of COntrol functions from the context menu: the help will be shown on the correspnding item, for example the list of attributes that can be used on a table
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to: Print table on first page, use second page (back) for text only

    Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
    We need to print a table over several pages, but only on Odd pages.
    On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
    We are on ADOBE version 8.1
    In the file properties, double sided is switched on, and version set to 8.1 and higher.
    I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
    FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
    Two pages were created for the content area's:
    ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
    CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
    What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
    What actually happens is that the item table also gets printed in the content area for the Condition text...
    Also the "Conditions" are not printed on the last back page. But only once before it...
    Cheers,
    Edwin.

    Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
    I have created 5 pages:
    1. FirstPage
         - Odd/Even: Odd (Front) Pages
         - Placement: First page (In page set)
    2. FrontPage (For Odd pages)
         - Odd/Even: Odd/Front Pages
         - Placement: Rest of Pages
    3. BackPage (For Even pages)
         - Odd/Even: Even (Back) Pages
         - Placement: Rest of Pages
    4. LastPage
         - Odd/Even: No Odd/Even Restrictions
         - Placement: Last page (In page set)
    5. DummyPage
         - Odd/Even: Blank pages
    The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
    The table that is printed is (of course) located on a normal page (flowed subform).
    Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
    The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
    The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
    What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
    Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
    The DummyPage is NOT used anywhere.
    The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
    Duplex printing is now working correctly, and the text is printed on the back of all the pages.
    Cheers,
    Edwin.

  • How to print table items in column in smartform in 4.6c version.

    Hi Experts,
    I want to print the items i have in columns (like name invoice number) in smartforms but when i create table in main window there no options for header footer and main area, i have created the template for header and footer but how i print the items in columns. Pls reply ASAP.
    Thanks in advance,
    Abhishek Pandey.

    Hi
    create a table under main window
    Under the Header create a Row or Line
    Under the Row create a Cell and Under that Cell create a text field
    In that text you can write what ever field name u want to write
    Reward if it is helpful to you
    Thanks
    Krushna

  • Production Order Print . table data in print output of order

    Hi SAP Buddies
    Can any one tell me what are the steps required for setting the SFC print output.
    IMG setting for print output.. of SFC papers
    Actually my main purpose is to get TABLE : MARD and Field LGPBE to printed on Goods Issue Slip.
    Warm Regards
    Brijesh Verma

    hi
    IN iMG settings OPK8 you need to set the Script forms,program name, list contorls,and printer specifications. against the lists
    to get your required data you need to edit the program assigend to the Goosde issue slip.
    pl check
    -ashok
    Edited by: Ashok Keerthipati on Dec 24, 2008 10:00 AM

  • Purchase Order : printing table in the SAPScript.

    Hi all,
            I want to print taxes in the PO . I have created SAPScript from the standard Script MEDRUCK & also attached it to the Appln - EF, in the T-Code : NACT.
            To pass the taxes i have written a code and that program i have called from the script. But, it is only the last entry in the internal table (it_out). I want to print all the taxes for the respective PO. And, the only last one tax entry in the it_out ,  it is showing in the print preview for 'Domestic PO', and, for 'Import PO', it is not showing any entry.
            Plz, try to solve this problem.... if anybody could give me the proper solution of this problem, i will definitely reward the points to him.
            I am giving the code that i have used in the report & in Script.
    Code in the SAP Script...
    /E  ITEM_CONDITIONS
    /:   PROTECT
    /:   DEFINE &TYPE& = ' '
    /:   DEFINE &TEXT& = ' '
    /:   DEFINE &PER& = ' '
    /:   PERFORM GET_TAX IN PROGRAM ZMM_PO
    /:   USING &EKKO-EBELN&
    /:   CHANGING &TYPE&
    /:   CHANGING &TEXT&
    /:   CHANGING &PER&
    /:   ENDPERFORM
    IN  ,,&TEXT&,,&PER&
    /:   ENDPROTECT
    Respective code in the Report
    *&      Form  GET_TAX
          text
         -->IN_PAR     text
         -->OUT_PAR    text
    FORM GET_TAX TABLES IN_PAR STRUCTURE ITCSY
                        OUT_PAR STRUCTURE ITCSY.
      TABLES : EKKO,         "Purchasing Document Header
                      KONV,         "Conditions (Transaction Data)
                     T685T.        "Conditions: Types: Texts
      DATA : BEGIN OF ITAB OCCURS 10.
      DATA :   EBELN LIKE EKKO-EBELN.
      DATA :   KNUMV LIKE EKKO-KNUMV.
      DATA : END OF ITAB.
      DATA : BEGIN OF ITAB1 OCCURS 10.
      DATA :   EBELN LIKE EKKO-EBELN.
      DATA :   KNUMV LIKE KONV-KNUMV.
      DATA :   KPOSN LIKE KONV-KPOSN.
      DATA :   KSCHL LIKE KONV-KSCHL.
      DATA :   VTEXT LIKE T685T-VTEXT.
      DATA :   KBETR LIKE KONV-kbetr.
      DATA :   WAERS LIKE KONV-waers.
      DATA :   KWERT LIKE KONV-kwert.
      DATA : END OF ITAB1.
      DATA : BEGIN OF IT_OUT OCCURS 10.
      DATA :   KSCHL LIKE KONV-KSCHL.
      DATA :   VTEXT LIKE T685T-VTEXT.
      DATA :   KBETR LIKE KONV-KBETR.
      DATA :   KWERT LIKE KONV-KWERT.
      DATA : END OF IT_OUT.
      DATA : PONO LIKE EKKO-EBELN.
      DATA : NO LIKE KONV-KPOSN.
      READ TABLE IN_PAR WITH KEY 'EKKO-EBELN'.
      IF SY-SUBRC = 0.
        PONO = IN_PAR-VALUE.
        SELECT EBELN KNUMV
                FROM EKKO
                INTO TABLE ITAB
               WHERE EBELN = PONO.
       READ TABLE IN_PAR WITH KEY 'KONV-KPOSN'.
        IF SY-SUBRC = 0.
         NO = IN_PAR-VALUE.
          LOOP AT ITAB.
            MOVE ITAB-KNUMV TO ITAB1-KNUMV.
            SELECT KNUMV KPOSN KSCHL KBETR WAERS KWERT
                  FROM KONV
                  INTO CORRESPONDING FIELDS OF ITAB1
                WHERE KNUMV = ITAB-KNUMV
                AND KAPPL = 'M'.
              ITAB1-KBETR = ( ITAB1-KBETR / 10 ) .
              APPEND ITAB1.
            ENDSELECT.
          ENDLOOP.
          SORT ITAB1 BY KPOSN kschl.
          LOOP AT ITAB1.
            IF ITAB1-KPOSN <> ''.
              SELECT *
                        FROM T685T
                       WHERE KSCHL = ITAB1-KSCHL
                       AND KAPPL = 'M'
                       AND SPRAS = 'EN'.
                IT_OUT-VTEXT = T685T-VTEXT.
                IT_OUT-KSCHL = ITAB1-KSCHL.
                IT_OUT-KBETR = ITAB1-KBETR.
                IT_OUT-KWERT = ITAB1-KWERT.
                APPEND IT_OUT.
              ENDSELECT.
            ENDIF.
          ENDLOOP.
          SORT IT_OUT BY KSCHL.
          DELETE ADJACENT DUPLICATES FROM it_out COMPARING KSCHL.
          LOOP AT IT_OUT.
            IF
                  ( IT_OUT-KSCHL = 'JADC'
                 OR IT_OUT-KSCHL = 'JCDB'
                 OR IT_OUT-KSCHL = 'JCV1'
                 OR IT_OUT-KSCHL = 'JECV'
                 OR IT_OUT-KSCHL = 'J1CV'
                 OR IT_OUT-KSCHL = 'JSDB'
                 OR IT_OUT-KSCHL = 'JEXC'
                 OR IT_OUT-KSCHL = 'JEXS'
                 OR IT_OUT-KSCHL = 'FRC1').
              AT NEW KSCHL.
                CLEAR out_par.
                CLEAR out_par[].
               LOOP AT OUT_PAR.
                  READ TABLE IT_OUT INDEX SY-TABIX.
                  SUM.
                  WRITE:/ IT_OUT-KSCHL,IT_OUT-VTEXT,IT_OUT-KBETR.
                  OUT_PAR-NAME = 'TYPE'.
                  OUT_PAR-VALUE = IT_OUT-KSCHL.
                  APPEND OUT_PAR.
                  OUT_PAR-NAME = 'TEXT'.
                  OUT_PAR-VALUE = IT_OUT-VTEXT.
                  APPEND OUT_PAR.
                  OUT_PAR-NAME = 'PER'.
               OUT_PAR-VALUE = IT_OUT-KBETR.
                  APPEND OUT_PAR.
               ENDLOOP.
              ENDAT.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDFORM.                    "GET_TAX
    Plz, help me by giving the solution...
    Thanks,
    Ajit

    Hi,
    System will not display the Purchase order item details in the first screen. First enter the data on the Item overview like Material or short text then only it will display the Item details.
    I think you are checking with out entering the data on Item overview .
    Check by entering the material/short text.
    rgds
    Chidanand

  • Issue in printing table to PDF format

    Hi all,
    I am really facing an issue in designing reports. I have to customize the report that i am displaying in the dashboard while printing or sending it as mail.I need to create a multipage report.
    I have a table displayed on the dashboard. Now with the help of the print button i can print the table to PDF format. But before printing in need to add some pages to the report like on first page i have a introduction(static) then on second page i have a table of content then after that i need to place the table that is on the dashboard etc.
    Could it be possible to modify a report like this or any other alternative?
    Thanks a lot.

    I found the solution .
    I incorporated query,infofield,company logo in report designer and then i imported the report designer into WAD

  • Creating layout in PDF Based Form to print table content.

    Hi ,
        I am facing problem in creating the layout of PDF Based Form . I do not need any interactive text but only active table in my context whose data i need to print . What i did was drag the table from data view into  the body page and activate . When i run it i only get a table structure but without any data .
    Can any one help me or give a pointer to any tutorial for this ?. I have checked in SAPnet for PDF Based Print Form but it somehow skips how to create layout.
    With regards,
    Saurabh Kumar Pandey

    Have a look at help.sap.com:
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/b7/64348655fb46149098d95bdca103d0/content.htm">Interactive Forms based on Adobe Software</a>
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/4c/9cc19e5c874091a99790e540b06f3a/content.htm">Inserting a Table or Loop</a>

  • Printing Table data: How to print the row data in 'Western Text' ?

    Hi,
    Scenario:
    I have a table containing, say 5 records. The table is placed in a sub form (Properties: Content - Flowed, Flow direction - Western Text) which is adjusted in a manner to occupy only half of the page (vertically).
    I need the records to be printed adjacent to each other i.e. after printing the first row of the table , the next record should be placed in the other half of the page and so on.
    Issue:
    The problem is that even though I have set the property (flow direction) to Western text, the data is printed one below the other as in the Top to bottom property.
    Am I missing something?
    Kindly advice how to resolve this issue.
    Please let me know if the question is anyway unclear.
    Regards
    s@k

    Hi Otto,
    Thanks a lot for your prompt response.
    yes there is plenty of space.
    I am trying to display the records of a table. I used sub forms to behave like table and body row.
    The body row sub form occupies left half the page (to make it clear, say you divide the page vertically). The other half (i.e. right half ) is blank. I have checked the box to repeat itself for each data item.
    Now after printing the first record on the left hand side, I want the second record to be printed on the right hand side and if there is a 3rd record in the table, it should be printed just below the 1st record.
    Please do let me know if still the issue is not clear.
    Kindly suggest.
    Regards
    s@k

  • How to print table twice (and more)

    Hi,
    I have a problem with interactive form placed into WD4A. I have a table in it and I want to print this table on all my 4 pages. But table is printed only on first one, others are emty. What should I set to print the same table on all pages of my form?
    Many thanks for answer!

    Hi,
    your suggestion is solution, but only workaround (many thanks for it!).
    If I have binded only field (no table) for textfield on more pages, content of this field is printed on all pages, I think behaviour for tables should be the same, because sending same data 4times is nonsense. Isn't there any javascript to "reset" table after print?
    Many thanks for any answer!

Maybe you are looking for

  • The best way to import video in Edge Animate project?

    What is the best way to add video and audio in Edge ANimate project? Thanks Ares

  • Adobe Plugin not working in Protected mode

    We have an adobe plugin for our application. The plugin creates a toolbar button in Adobe and on clicking this button, it invokes one of the form from our application to save the document record for the PDF file in the database. The plugin was workin

  • PHP email form with Validation - not working

    Hello; I am new to using php. I usually use coldfusion or asp but this site requires me to write in php. I have a form I am trying to get to work and right now.. it doesn't do anyhting but remember what you put in the fields. It doesn't want to send,

  • CATS - Transfer program

    In CATS( Cross application time sheet) can we have same sender and receiver cost center ..If so will an transfer program that is RCATSTAL will error out this or will it get posted. Thanks

  • Ingres Raise Error versus Oracle  Exceptions

    I am working on converting an ingres database and procedures to oracle. The Ingres procedure does 3 updates and after each one if there is an error the procedure sets a different error. Ingres uses the raise error statement. So I am wondering how Ora