Print under Mavericks 10.9.1

Since I upgrade to Mavericks, I can't use anymore my printer hp deskjet 5652.
I can't find new driver to make it run. Any suggestion to solve this problem ?

Since I upgrade to Mavericks, I can't use anymore my printer hp deskjet 5652.
I can't find new driver to make it run. Any suggestion to solve this problem ?

Similar Messages

  • How do you print comments in pages under mavericks?

    How do you print comments in pages under mavericks? Earlier if show comments was checked, all the comments were visible and could be easily printed. Now only those comments are visible on which the cursor is pointed but even those do not get printed! 

    Thanks to all for to the 'older Pages' suggestion. I don't have the last Pages on my mac anymore (although this is probably just me being really, really dumb), but the suggestion inspired me to try another very similar work around - which was also successful. Just in case anyone's in the same situation as me, am sharing it here!
    For absurd reasons I won't bother to explain, I've also got a version of Word for Mac. I prefer writing on Pages, though, so all my documents (and their comments...) are Pages files. In the really unlikely event that you've also ended up with both Pages and Word (I know...) just export to a .docx file, open it with Word, and print from there. It retains all comments, track chages, etc. This seems really obvious, but I hadn't thought of it...
    This can also be a work around for the lack of 'Compare Documents' and/or 'Merge Documents'.
    Of course this would all be much better if it were actually just in Pages...I hope this helps, and thanks!

  • Printing to an Epson 7900 under Mavericks

    Anyone experienced problems printing to an Epson 7900 under Mavericks OS X 10.9 ?
    According to Epson I have the latest drivers installed for the 7900, V9.04
    I have 2 MACS - a MacBookPro running under Mountain Lion and I've updated my MacBook Air to run 10.9.
    No problems printing the same file from the MacBookPro.
    On the MacAir, I certainly see the printer; can send a file to it - but it prints and is terribly garbled.  I see supply levels on the MacAir too.
    But the interaction with the Driver is strange - it keeps reverting back to my HP 2100, Updating the settings in the printing Presets doesn't stick, etc.
    the print is an almost total mess - it's the right size and you can see the image and some parts are fine - but the rest of it looks like it's done with drastic motion blur (so that looks like the driver is scrambling something).
    If nobody else has seen this, then I will start by deleting the driver; re-installing it all and so forth - but just interested to see if anybody else out there has had trouble with it.
    jc

    use a computer with an internet connection to download the installation files (to a usb stick, eg) and transfer the stick to your non-connected computer.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Problems to print contacts with specific fields under Maverick.

    I am unable to print contacts with specific, selected fields like `firm´ or `position´under Mavericks. The selected fields will not show up in the printing preview and not be printed at all. Any ideas?

    Thanks, John! It seems you guessed correct, partly at least. I turned some of the problamatic fields off and on again an these are showing up now and I can print them. Great!
    However, I can see the field "firma" (German = company in English) in the previewed sample card but not in the pull down menu "Add Field". That means, I am unable to turn it off/on. The intersting thing: The field is visible and selectable even in the printer dialog were you can select the fields you would like to print but it remains unprintable.
    Again, many thanks, John! 

  • How to remove duplicate POP messages in Mail under Mavericks

    Hello
    I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
    My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep ALL my mail (even the trash) so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails in around 250 subfolders. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
    A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. I left it while I decided what to do, and had time to deal with it...
    The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then planned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
    The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. I also rebuilt all the folders again, which doesn't seem to have resulted in any further loss of messages as far as I can tell. However, I hadn't figured on two things:
    1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
    2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
    So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size, because of the 'hidden' messages), a slow and unresponsive Mail program. I've come to the conclusion that there must be some corrupted email somewhere, which probably caused the original email haemorrhage, and may still be causing the inability to remove duplicates. Mail is so slow as to be almost unuseable.
    I figure I have a number of options:
    1. I could live with the situation and just archive most of the Mail in my inbox, with the side effect that there will be a bunch of messages I have never replied to that are missed.
    2. I could abandon the last week's efforts and revert to the version of Mail I was using a week ago, and then redownload the recent emails from my various accounts. That would still leave me without those thousands of emails I lost on my local machine.
    3. I could find another way to deal with this. Can I get the remove duplicates script working? Should I revert to the version of Mail from a week ago, download ALL the messages again, but do it in a way that allows me to find the duplicates and remove them? Should I move to another email program altogether (which would presumably be massively disruptive to my work!)
    Anyway, apologies for the essay length of this request, and thanks in advance for any help you may be able to offer!

    hi Eric
    thanks for the tip, but I don't think that solves my problem, which is that Mail apparently hides the duplicates, so they're still there, you just can't differentiate or remove them. I actually *need* the duplicates there so I know I've got everything, but then I need to be able to move the ones I know I've dealt with from my inbox to an archive/trash, and/or remove them completely so Mail isn't totally bloated

  • Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Is there a way to use my HP6100 Printer with Mavericks?

    Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard? 

    It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
    I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
    http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
    Alternatively ou could try Gutenprint (open source software):
    http://gimp-print.sourceforge.net/MacOSX.php
    I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

  • I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

    I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

    I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • Printing under mac os 9 emulation in a mac os X

    hi all,
    i have a serious problem printing with my mac os X using the classic version.
    i installed the driver for the the 9 and X.
    printing under X no problem.
    but under classic
    when i go to laserwriter 8. i have no printer installed.
    can u help consernng this case
    Regards

    Hi Team1
    Can your computer boot up in OS 9? If so, try installing the OS 9 driver with the computer in that system, then testing the printer under OS 9. If you can get it running then, you should be able to get it running under Classic.
    Cheers!
    Karl

  • All Labels in the Smartform  should be printed under one spool request ?

    Hi All,
    I need to print the labels with some data .At a time I have to print 10 labels with the same Spool request. I have required data in one internal table .I am looping the internal table and printing the label.In this case every time control leading to Print prview, and when i click on PRINT button then only It is leading to the Spool.For each print it is creating a new spool .
      But My requirement is , I need all the labels should be printed under only one spool .And I can see the print preview only once , and  if I click on print  button 10 labels(depending on the records in internal table) should be printed .Cotrol should not come again to the Print popup .
    Thanks,
    Suresh Kumar D.

    Hi,
    As per your requirement, if you want to print 10 labels, in same spool request, design your smart form like that,
    I mean design 10 labels in your smart forms.
    I hope this is easy solution.
    Regards,
    Sreenu.

  • Multi-display windows under Mavericks

    Under 10.6.8, it has been my habit (and pleasure) to open very wide terminal windows across as many as three displays in order to see the results of somewhat wide database queries without text wrapping, which affects readability and cuts the number of lines visible on the display window at once.
    Under 10.9.3, when I adjust a window over towards another display so that the window would be on both displays, the window is "ghosted" until I let go of the drag bar, and if the move has not fully adjusted the window to land entirely on the display it is moving into, that half of the window promptly disappears.
    Am I missing something about window positioning under Mavericks? Or, is there any way to regain the previous, multi-display-friendly window handling in Mavericks?

    Am I missing something about window positioning under Mavericks? Or, is there any way to regain the previous, multi-display-friendly window handling in Mavericks?
    You have been IOS-ed (blindsided by features ported from IOS, the land of tiny screens and one-at-a-time processing) Turn this off to go back to the "Un-Natural" way of doing things:
    OS X: Using multiple displays in Mavericks

  • Main display blank after sleep under Mavericks

    I use a NEC Multisync LCD 2690 as my main display, and a small Hansol H550 as a secondary one; when waking up from sleep, the NEC is blank and everything is crammed up on the Hansol. Under Lion, I could go to the System Preferences, choose Monitors and Detect Monitors to force the displays to correct themselves but this feature is absent under Mavericks; any idea how I could correct this without having to perform a complete restart each time the Mac Pro goes to sleep?

    Found the so-called missing feature: in System Preferences, choose Monitors and hold down the Option key to get the Dectect Monitors button. Still, loosing the main display after sleep is a BIG bug...
    P.S. I’m working with a French system, the naming of the features might be slightly off.

  • IPhoto under Mavericks

    Got major problem.  Can't order previosly published projects under Mavericks.  Nothing else has changed so it looks like a software problem.  Anyone with any ideas?

    Created a number of books in iPhoto and ordered them from Apple store via the software link.  No problems except now that I have upgraded to Mavericks, I can't reorder the books since I keep getting a message at the end of the uploading to the Apple store which says "An error occurred uploading your Order" and asks if I wish to cancel order or retry.  I have retried a number of times but to no avail.  I have tried ordering from my MacAir instead of my iMac but still not luck.  I have restared with the shift held down to move to safe startup but still no luck. I have reinstalled iPhoto but still no luck.  It would be great if the Apple store could just reprint my books since nothing has changed and I just need more copies but this doesn't seem to be an option.

  • Intel Fortran compiler broken under Mavericks

    After upgrading to OS 9 on a Mac Pro and a MacBook Pro, and installing Xcode 5.0.1 on both, my Intel Fortran compiler (vs 12.0.5) no longer works.  I have updated the command line tools.  When I try compiling a source file it fails with the message:
    ifort: error #10001: could not find directory in which g++ resides
    There is a compiler option to specify the location of g++ "-gxx-name=" but this doesn't help - same error message.  I'm not sure if I need to set a system variable or if I need to go back to an earlier version of Xcode.  Has anyone managed to get their Intel Fortran compiler working under Mavericks?

    I haven't found this topic in the other Categories, so I'll reply here:
    I'm having the same problem!!! Leopard has crashed ifort 32 bits! So I can't run my programs on my macbook core duo (32 bits), although it's ok with the ifort 64 bits version. But I really REALLY need the 32 version working on Leopard. Anyone has any clue about how to solve it? I've tried some 9.1 ifort's versions and the new 10.1 version. You can find evaluation versions on the intel's site.
    Please someone help us.
    Thanks,
    Filipe

  • Mac Book Air 13 (october 2013) under Maverick /Flash Player 11 not active after installation

    I live in France and installed Flash Player 11 (last update) on my brand new Book Air.  Several times. Installation apparently succeeds, but it seems that nothing is effectively installed (I checked on the Adobe help site which confirms that). Indeed, I have nothing active and cant't hear audios, read graphics.... on web sites. I have messages saying " module manquant" (missing plug).
    I have checked Safari which correctly admits java and other plugs (security).
    Would my Book air be too weak for Flash Player (I have Intel 1,3 Mgz Core I5 processor). Would an older version of Player then help under Maverick ?
    Thank you !

    How to perform a "clean install" of Flash Player in Mac OS X

Maybe you are looking for

  • Gmail SMTP outgoing does not work after Yosemite upgrade on MacBook Air

    In my MacBook Air: I quit mail, opened my ~/Library, opened the Mail, V2, MailData, Accounts.plist. I find the offending mail account, change from <false/> to <true/> then reopen mail. But the same issue keeps reoccurring, because the change from <fa

  • Panel size won't "stick" when restarting LR.

    I want the left hand panel to be MUCH bigger so I can see more of my folder names. I can re-size it, but when I close and re-open LR, it returns the panel size to the original default size. Is there a way to get the re-sized panel to stay that way ac

  • How do I put a video that I made in Premier Pro onto YouTube?

    I've done all the exporting but I want to turn the video into an actual video file not a premier pro project because it won't let you upload that to YouTube. Please help it's urgent! I'm completely new to Premier Pro by the way, I'm using a trial for

  • Safari 4.0.3 'open in tabs'

    Hi, can anyone help with regard to the 'open in tabs' contextual menu option in Safari 4.0.3. When attempting to open multiple tabs the browser just hangs. I've tried uninstalling the Saft SIMBL plugin with no joy. Thanks in advance, Christian Macey

  • Cant load music from ipod to library

    my computer received a virus but we reformatted the computer so I had to download itunes again. so i lost my music from the library. I tried to do these instructions: - Start with the iPod disconnected from the computer - DON'T CONNECT IPOD YET - ope