Printer Change of Production TO

Hi,
The requirement is to change the printer from XXX to YYY for Production TOs
YYY is already configured in SAP System.
But currently in OMLV the current setting is with ZZZ printer for corresponding Warehouse,
Is there any other place where I can change the printer for Production TOs?
Regards,
Vengat

It is in OMVL T.code only & it was for the particular to Storage type.

Similar Messages

  • Problems with Print Program of Production Order (CO03) !!

    Hi all,
      I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu <b>Functions >> Print</b>). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
    I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
    <b>I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification</b>?
    Thank you in advance.

    Hi MURUGESAN THANGATHURAI  ,
        Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
    When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), <b>it will not update this</b>?
    What's problem?
    Thank you guys.

  • Print out of production order from co02

    Hi All,
      How do I take a print out of production order from co02. If I go to co02- Functions-Print- I get an error that after the next update the order will be printed. Since the production order is already in the released state how do I take the print.

    Priya,
    What system is prompting is that once you use the print function in the change mode of the order, system prints the papers to Spool or Printer once it is saved, that is the reason it is giving you a message.
    Please save the order after using the Print function in the change mode of the order, I am sure that you would get the print output either directly to the printer configured or to spool. If it was configured for spooling, use the transaction SP01/SP02 to print the spool request.
    Regards,
    Prasobh

  • Need help with changing the product name for a HP LaserJet Pro 401n to use on a ePrint network.

    I am in a school environment, naming printers is imortant. 
    Bonjour Service Name and Device Description name have been changed. IOS7 devices see the Bonjour name but ChromeBooks see the Product name. How can I change the Product name on the printer so that it is then recognized by HP Connected and shown to ChromeBook devices?

    You should be able to change the product name in Google Cloud.  The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint).  Log into your google account and change the printer name there.
    I am an HP employee.
    Opinions expressed are mine and do not necessarily reflect the opinions of HP.
    Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

  • How do I change an hp officejet j6400 printer change from color to black and white?  I have a Mac 10.8 OX system

    How do I change an hp officejet j6400 printer change from color to black and white?
    I have a Mac 10.8 OX system

    Hi JasperNM,
    You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
    First locate the printer IP address as following:
    Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
    On the control panel, press the Setup button ( ).
    Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
    Press the OK button to select Print Network Settings .
    Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
    Now map a network driver by following the steps below:
    Click the Finder icon on your Mac.
    Click the Go menu.
    Click on Connect to Server.
    In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
    You will be prompted to enter the password. leave it as is and click on Connect.
    The Memory card will be mounted as a disk in the Finder.
    Shlomi

  • Assembly to order: change in sales order with change in Production order

    I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
    But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
    Please tell me the reason why it isn't happening!!

    Hi
    The sales order requirement can be made as the production order receipt once you save the order in the system.
    so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
    in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
    even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
    but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
    Edited by: raj on Jun 9, 2009 11:22 AM

  • BADI for changing the product cost

    Hi All,
    My requirement is to change the product cost when the costing engine is running via ck11n or ck40n. Iam looking for user exits and BADI's for this requirement.
    I did look into the BADI DATA_EXTENSION_CK but this particular BADI does not have export or changing parameters. Can anyone suggest any user exit or BADI's for this requirement. I also looked into other BADI's like
    CK_KALAMATCON2_CI
    COSTINGRUN_CK
    COST_APPORTION_CK
    CO_PROD_COSTING_CK
    DYNPRO_EXTENSION_CK
    ORDER_COSTING_CK
    QUANTITY_STRUCT_CK
    SUR_STOCK_TRANSF_CK
    VALUATION_CK
    But none of them served the purpose. Plz help...Thanks in advance...
    Regards,
    Nirmal.

    Hello,
    Will this help?
    Product costing with Enhancement (Valuation variant with User Exit)
    Cheers,
    TD

  • CO-PA Realignment: Changes in Product Hierarchy

    Hello all,
    We have changed the product hierarchy on some of our materials and we want to realign the PA data to reflect the same.
    Our product hierarchy which we have three levels is maintained in KES1. There are no derivation rules. KES1 is updated manually everytime any changes occur.
    For example:
    OLD
    Product: 1-189-01
    Hierarchy 1: 100
    Hierarchy 2:A7300
    Hierarchy3: B56220
    So on the material master the prod hierarchy is 100A7300B56220
    NEW
    Product: 1-189-01
    Hierarchy 1: 125
    Hierarchy 2:A7500
    Hierarchy3: B56120
    I tried using KEND for realignment and this does not change anything. Any help, how to proceed with the realignment is appreciated.

    Hi Anusha,
    Did u also update PH level in KES3 - in specific hierarchy variant ? Also would like to know how did u reset the operating concern
    Thanks,
    Samik (SAP MM)

  • IDoc creation on save and change of production order

    I am looking for a way to create, and send if possible (if not I'll send with a batch job), on the save (creation and change) of production orders.  This will be a modified LOIPRO iDoc.  Currently we have a customer exit on the save of the production order but because it is before the save we must predict the number of the prod order.  This has worked but now we are creating one production order per line item in a sales order (automatically) so this is causing us to predict the same production order number twice.  We need a way to automatically create and send an iDoc for all production orders for given plants.  Right now the solution we are looking at is creating an output type and running through those output types a few times a day, sending them down to the Shop Floor system (proprietary system). 
    Is there anything setup in SAP that we can utilize?
    Regards,
    Davis

    Hi Rick,
    Follow the below sample steps for changing component quantity:
    DATA:
        l_methods TYPE bapi_alm_order_method,
        it_boperations TYPE STANDARD TABLE OF  bapi_alm_order_operation_e WITH HEADER LINE,
        it_components TYPE STANDARD TABLE OF bapi_alm_order_component_e WITH HEADER LINE,
        it_components1 TYPE STANDARD TABLE OF bapi_alm_order_component WITH HEADER LINE.
    1. Call BAPI :BAPI_ALM_ORDER_GET_DETAIL , it will give existing order component details.
    CALL FUNCTION 'BAPI_ALM_ORDER_GET_DETAIL'
        EXPORTING
          number        = <production order number>
        TABLES
          et_operations = it_boperations
          et_components = it_components
          return        = it_bapiret2.
    2. Move it_components to components table compatibel to BAPI "BAPI_ALM_ORDER_MAINTAIN".
    LOOP AT it_components.
    MOVE-CORRESPONDING it_components TO it_components1.
    _*"Note here while moving change the component quantity"*_
    APPEND it_components1.
    CLEAR it_components1.
    ENDLOOP.
    3. Build the methods table for change production order :
    it_methods-refnumber = v_refnumber.
                it_methods-objecttype = 'COMPONENT'.
                it_methods-method = 'CHANGE'.
                it_methods-objectkey = v_objectkey.
                APPEND it_methods.
    "Note v_refnumber has 1 to 1 relation ship with the components table, if you want to change First component in it_components1 then you have to enter value '1' here for v_refnumber.
    it_methods-method = 'SAVE'.
            APPEND it_methods.
    4 . Call
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
              TABLES
                it_methods   = it_methods
                it_component = it_components1
                return       = it_bapiret2.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

  • TWO Changes In Production System

    Hi , there are two changes in Production system,
    one is there is a report i have to do some modification in PROD,for this have to do in DEV,QA,PROD Respectively , here whether i have to use old request to new one , is this is the right practice or not,
    second in  transfer rules there is a conversion routine , i have to do some modification , How can i do like once again DEV,QA,PROD
    Hope u understand the problem
    With Regards
    MAHI

    Hi,
    Normally we dont have any authorization for changing the objects directly in production.
    You need to make the required changes in Dev and then move to Quality and then to Production. Hence you need to create a new requrest for all the changes you made in Dev and move to Quality and then to Production.
    Hope this helps.
    Regards,
    K.Manikandan.

  • How track changes in production order which is already Read PP master data

    Hi Gurus,
    Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
    We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it.  That It could not be able to distinguish to which order READ PP MASTER DATA done.
    So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
    Any table which can track the changes once the order been through with READ PP MASTER DATA?
    As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
    Hope to get a reply soon.
    Regards,
    Sap User

    Hi,
    A suggestion:
    Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
    Revert if you face any issues.
    Regards,
    Vivek

  • Vendor name is deleted after the approver changes the product category.

    Hello,
    We have implemented workflow WS14000044(Completion by Purchaser) and
    WS14500015(Item-Based Main WF).
    At workflow WS14500015 level, when the approver changes the product
    category, the vendor name is deleted.The previous validation allows the
    PO creation , But the PO is created without vendor.
    Furthermore under transaction process purchase orders 'BBP_POC' the
    purchaser can not access in change mode to the vendor field in order to
    add a vendor.
    How can we give access in change mode to the vendor field for purchaser in transaction 'BBP_POC' ?
    Regards,
    Lina

    Hi,
    Which SRM version are you working on?
    Please see if the foll notes help:
    <b>801591 Source determination after item change</b>
    881346 Vendor incorrectly deleted
    873972 Sources of supply in the shopping cart with catalog items
    908178 Transferring reference: Deleted vendor
    Note 829652 - Completion workflow in shopping cart: Vendor
    789087 Changed product category: Vendor not deleted
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Mass change on production order (assembly type) to put deletion flag status

    Dear all,
    I've make a mass change on production orders to settle the status DLFL through the Tcode CO78.
    Some of the production orders  are "assembly order" type. Those could not be up-dated with the DLFL because there are linked to customer order. The customers orders are closed.
    What can I do to change the status for this kind of production orders. It is necessary for me to be able to put the DLFL status in order to improve the process of production closure done each month.

    Hi kiran 
    Thanks for the response. As I cannot put deletion indicator on the Assembly order directly, Do we have to put deletion indicator on the sales order item?. If so, Can we put a deletion indicator after the sales order was delivered and invoiced. What exactly have you guys done to put deletion flag on the production order.

  • LOGO is not printing correctly in Production but printing correctly in Qual

    Hi Friends,
    I am an ABAPER.
    In Scripts I had a logo. Problem is in development and quality systems it is printing correctly but it is not printing correctly in Production system. I have tested all the development, quality & Production systems with the same printer. Experts please guide me where exactly the problem is how to solve it. Good points will be rewarded for related solutions.
    Hi Nageswar,
    The exact problem is the logo is alphabetical characters only, but for example APPLE is the logo. The word Heading 1: APPLE. is in Coloured BOLD letters. In development and quality it is printing as it was original logo. But in Production the letters for APPLE is printing in such a way that A is printing as dotted letter A and so on for PPLE. But in quality and development is working fine Printing as BOLD letters.
    Finally want to mention that APPLE is a scanned logo. Its properties were same in three systems i.e, development, quality and production.
    Experts please help me.
    Edited by: pavan kumar on Feb 6, 2008 12:26 PM

    Not correctly in the sense. Please explain the error you are getting.
    Hi Pavan ,
    Check the printer settings it SPAD transaction and check printer settings were smae in both systems.
    Regards,
    Nageswar
    Edited by: Nageswar Vattikuti on Feb 6, 2008 5:01 PM

  • Getting font problem for printing form in Production server.

    Hi experts,
                   We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
                  Can any one suggest me on this issue.
    Regards,
    Sagun Desai.

    Hi sagun,
    Please check the spool request generated on production server using tcode SP01.
    Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
    The printer connected to the test server  might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
    Hope this helps.
    Regards,
    Subodh

Maybe you are looking for

  • Solaris Management Console initialization

    Pulling hair out .. please help. i have applied the patches for smc/wbem/viper (i think). I am having a problem starting the SMC server. I finally managed to direct the error output and see this: Starting SMC server version 2.0.0. endpoint created: :

  • [SOLVED] setting up a Mail server - advice and or warnings

    I am about to set up a mail server for family (about 10 accounts) and could do with some advice on what to use, how to set it up and how to protect it from becoming a zombie spam server. I have courier functional now. Last edited by Cheifchimp (2010-

  • Taxinn configuration in sd from scratch

    can anyone tell me the full configuration of taxinn procedure in sd. Now i created a pricing procedure in ides system. i want to have the tax condition types like vat, sess etc in my pricing procedure. so anyone send me the links or any relevant oss

  • How to make a flash starter (to other flash animations)

    What is the code I must use when I click on a button (goto1_btn), it loads another flash animation (1.swf) which has a back button (back_btn) to return at the starter? (gallery) (Note: I'll use more than 30 btn on the starter → at the end: more than

  • Administrative Interfaces for Adapter

    Hi experts, Can we manage the life cycle of an Adapter, i mean are there administrative interfaces for Adapter-Framework-compliant adapter? Plz help. Regards, Sushama