Printer escape code

hello,
i have designed a charachter mode report that require a page size height 66 and width 132 portrait mode to print,
i need to print this report on a generic printer, i have tried various generic printer defination files that are shipped with oracle reports, but the printer prints it according to the page size of height 66 and width 80 becuse of which data gets truncated, however if i send the output a file then it is correct.
Any body please could tell me what i should do, i am gone blank?
Thank you in anticipation of reply.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
hello,
i have in trouble in same kind of problem if you able to get ride off this problem please help me.
i have designed a charachter mode report that require a page size height 66 and width 132 portrait mode to print,
i need to print this report on a generic printer, i have tried various generic printer defination files that are shipped with oracle reports, but the printer prints it according to the page size of height 66 and width 80 becuse of which data gets truncated, however if i send the output a file then it is correct.
Any body please could tell me what i should do, i am gone blank?
Thank you in anticipation of reply.<HR></BLOCKQUOTE>
null

Similar Messages

Req: Example of report sending a printer escape code

Hello, I have a batch report that prints student transcripts. After a transcript, I need to tell the printer to staple.
Please point me to an example of sending a printer escape code.
By the way I'm printing from Win98 to a Konica 7055 using the postscript driver.
Thanks!
Gary C. Whitaker
St. John Health System
Information Systems
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
hello,
i have in trouble in same kind of problem if you able to get ride off this problem please help me.
i have designed a charachter mode report that require a page size height 66 and width 132 portrait mode to print,
i need to print this report on a generic printer, i have tried various generic printer defination files that are shipped with oracle reports, but the printer prints it according to the page size of height 66 and width 80 becuse of which data gets truncated, however if i send the output a file then it is correct.
Any body please could tell me what i should do, i am gone blank?
Thank you in anticipation of reply.<HR></BLOCKQUOTE>
null

Report printing escape codes

Hi,
My report comes out with escape codes printed.When I print to file it shows that the escape codes are interpreted correctly BUT they still come out as printable characters when I send to printer. Funny thing is when I output to file then print it using DOS (copy the file to printer port) my report comes out ok with the printer codes interpreted! What could be wrong? sb pls help urgently! I am using reports 6i on WIN2000 platform.
Mbachi

You need to set the printer to spool the raw data (and not try and be clever and interpret the escape characters, which is what's happening now). To do this on Windows 2000:
* Click Start , point to Settings , and then click Printers .
* Right-click the printer that you want to use and click Properties .
* On the Advanced tab, click Print Processor .
* Click Raw in the Default data type box.
* Click OK to confirm changes.
* On the Advanced tab, clear the Enable advanced printing features option.
* Click OK to confirm changes.
Hope this helps,
Danny

Escape codes for laser printer Kyocera FS-3920dn in reports 6i

Hi,
I use many reports for printing on laser printer Kyocera FS-3920DN. But now I need print some reports on special performed paper. For this we added 1 paper tray to printer ( Now we have 2 trays in printer ). How can I define for new reports which tray have to use ??? I wish to specified for report2.rep to use automaticly tray 2. Its a way through PRT file use escape codes ?? Have you any experience pls??

In the report itself you can use:
SRW.SET_PRINTER_TRAY('tray');
see the online help.
We do it differently, though. Our printers have 2 trays, one with blank paper and one with pre-printed logo paper.
On each PC there are two printers defined (PRINTER_BLANk and PRINTER_LOGO). They point to the same printer, just a different tray.

Leopard Terminal.app no longer supports ANSI print escape sequences?!!

I print my email using pine's "attached-to-ansi" option, which used to work great in Tiger with Terminal.app. It no longer works in Leopard. It also breaks things like the "ansiprt" Unix command.
This is a start/stop escape sequence that diverts text between the start/stop sequences to the printer. See http://www.termsys.demon.co.uk/vtansi.htm as a reference.
Is there some Terminal.app setting I need to use to enable this? Some specific terminal type perhaps?
Suggesting that I use enscript or other techniques don't work, as I use the Terminal to ssh into my mail server, then run pine on the mail server.
Anyway, any idea how to get this very desirable feature back?
Thanks,
-John

HI,
I tried to set "Escape non-ASCII input" without any change. I didn't see an option to change "Escape non-ASCII output". I tried a few other things without success either using a different terminal type and so forth. I looked in the .term file and didn't see anything text related to ANSI or ASCII or escape.
If I change a Terminal preference do I need to quit and restart Terminal to test the change, or does the change take place as soon as I change it in the menu? I tried quitting and restarting after checking "Escape non-ASCII input" and when I restart the box was unchecked. I couldn't find a "save preferences option either.
In Tiger, my terminal type was xterm-color- same in Leopard. I had checked off "Escape non-ASCII characters" under Tiger.
Here's exactly what I do, *which used to work in Leopard*.
I run Terminal.app on my MacBook, and ssh to a mail server. On the mail server, I run the pine command to read my mail. Pine has an option to print email using ASCII escape sequences. Terminal.app sees these escape sequences and diverts the text to the default printer on my MacBook.
Under Leopard, the Terminal doesn't catch the ANSI escape code, and just spews the text to the terminal window. Nothing has changed on the mail server side. I;m using the sane ssh command.
Enscript won't work, as the printer connected to the mail server is often as not in a different state than my MacBook.
Not all terminal emulators support the ANSI print escape sequences. Terminal didn't before Tiger, if I remember correctly. I used to use a very nice terminal emulator called Data Comet which did it.
ANSI printing used to be a fairly common way to print to a local printer connected to via a parallel cable. Besides pine, the Unix command ansiprt http://kb.iu.edu/data/abye.html could be used to print remote files on the local printer. Some terminal emulator programs used the idea to hook the ANSI escape sequence to the printing system, extending the functionality to use any printer accessible by the local system.
Thanks again for all your help. I hope I've clarified what I'm trying to do.
-John

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Use abap report program to print bar code instead of smartforms

Do anyone know how to use abap report program to print bar code?

Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Print Bar codes in SAP script.

Hi Experts,
Could you please tell me how to print bar codes through sapscript (the steps basically)?
<<text removed by moderator>>
Thanks in advance,
Suchi.
Edited by: Matt on Nov 13, 2008 2:04 PM - do not use ASAP or urgent.

hi,
check these.
[https://forums.sdn.sap.com/click.jspa?searchID=18572128&messageID=4724540]
[http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

Printer claim code, printer laserjet 600

Hi,
To get the printer claim code, I enter the IP address listed on the configuration page but I keep getting "problem loading page," so I cannot connect to the HP Embedded Web Server. I've triple-checked the IP address so I know I'm not entering it in wrong.
Please help.

Hi,
Please use the following setup to get claim code:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536#N304
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My HP 309a all in one printer will not print bar codes like airline boarding passes or tickets.

I use Windows 7 with XP Pro I have received no error messages and have plenty of free disc space. I have not a clue as to what has happened. I see the ticket with a bar code on my computer screen but when I try to print it the bad code will not print. Any suggestions?

my hp6980 printer won't print bar codes using windows 7 on computer

My printer was working fine. Now it will only print in code not words what do I do??

My hp officejet 4500 all in one wifi. Was working fine now it wont print words only will print in codes. Already reinstalled printer but that didn't correct the problem. Im desperate ;{

Did you completely power off the printer and the computer? Sometimes (maybe due to unexpected shutdown, glitch in the network, etc.), data get left in the port, and resulting in this behavior. A complete shutdown should clear the ports.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Printing QR codes and Barcodes together

Dear All,
I have referred the following link to print QR code as a post script:
http://scn.sap.com/people/robert.russell/blog/2010/10/25/barcodes-in-sap-with-the-barcode-writer-in-pure-postscript
While printing my SAP Script/ SMARTFORM output on any printer, if I specify output device as ZBWIPP then QR code is being printed perfectly, but barcodes (Which are already there in script and are expected to be there) are not being printed at all. When the output is printed without specifying any output device, then only barcodes are being printed and not the QR code.
I have tried adding print controls ZBW01, ZBW02, ZBW09 and ZBW91 to the output type of printer, even then QR code is not being printed.
I request your advice and help on how to get QR code and barcodes printed together. Thank you.
Regards,
Kartik
P.S. These existing barcodes are of type BC_CD39, not post script barcodes.

Hi Karthik,
I have a requirement to
1) Output data from an internal table into excel, and
2) Create a chart from the data in excel
So far I have been able to export the data using OLE calls, created a chart object,.
My question:
1. How to put Data Lables
2. How to put Data Table under the Chart
3. How to rename the series names.
Below is the recorded Macro. I don't know how to convert it to ABAP.
Sub Macro1()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlColumnClustered
Application.CutCopyMode = False
ActiveChart.SetSourceData Source:=Range("B1:E4")
ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
End Sub
I have attached the current output and expected output.
I have searched about this in google but i could not find any solution for this.
Your help is greatly appreciated.
Current Output:
Expected Output:
I hope that I have explained my query clearly.
Thanks,
Lakshmi.

Mass Receipt Printing (T-Code FPREPTM) - To be tracked in CORRHIST??

Hi Experts,
For Mass Receipt Printing(T-Code FPREPTM), with a specific BP/CO/CA, after the button 'Schedule Program run' is pressed, we need to create an entry in Transaction CORRHIST. Can anyone please suggest how this could be achieve?
Thanks a lot in advance.
Regards,
M.

Hi,
this is from my understanding an FI-CA question and not related to Fixed Asset Accounting (FI-AA). Please open this thread in an appropriate forum.
Thread moved to Forum ERP Financials.
Regards,
Markus

Printer escape code

Similar Messages

Maybe you are looking for