Printer issue with Oracle11i Arabic report

Hi
We are using Oracle11i(11.5.10.2) on Aix 5.3
Oracle11i Arabic report output is not properly printing on printer.
Number in Arabic in Report is not printing ,it is printing international number like 1,2,3
we are using PAST driver and report in Text Format
Thanks
With Regards
A-Z

What is your database characterset?
Please see these docs.
HOW TO CONFIGURE PASTA FOR ARABIC [ID 816879.1]
PASTA 3.0 Release Information [ID 239196.1]
How to Setup EBS, VPasta, And Pasta for BIDI Languages [ID 839520.1]
Printing and Previewing Arabic Reports using PASTA in Oracle Applications 11i [ID 179801.1]
Thanks,
Hussein

Similar Messages

  • Issue with Exceptions in Reporting

    Hi BW Gurus,
                I am still new to BW, Like I have a issue with exceptions in reporting.
                Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
       V1                  46,782,434(this are rough figures)
       PD                  56,232,453
       Overall Result      102,434,111
            Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
            I have given threshold values in exceptions. like
       0           -
    > 45,000,000(Red)
       45,000,001  -
    > 65,000,000 (Yellow)
       65,000,001  -
    > 500,000,000 (Green)
           But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
           Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
           Thanks in advance.
    Regds
    Sam

    Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
    Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
    Hope this helps...

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

  • Strange Printing Issue With New HP & Pages

    Hello!
    I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
    You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
    After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
    This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
    Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
    Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
    Any advise, wise words would be greatly apprechiated!
    Thanks!

    Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
    We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
    Very Strange!

  • Crystal report Export/Print issue with Non default websites

    Hello ,
    I have an issue and its driving me nuts.
    My problem i guess with the crystal reports. Might also be with IIS.
    We have developed an website on VS2008. This website is configured on IIS 8.5
    The server on which iis8.5 runs is a virtual server.
    I have configured the website to run as two different virtual directories as mentioned below;
    1) To run under default website (servername/virtualdirectory)
    2) To run under complete separate website (www.abc.com/virtualdirectory)
    if i  run crystal report using the servername/virtualdirectory, then the report is rendered fine and i can export the results also to any format and print successfully.
    But when i run the crystal report using www.abc.com/virtualdirectory, then the report renders fine but i cannot export the results nor print. Nothing happens when i click the export button.
    Any help will be highly appreciated.
    Thanks
    Abdul Aleem

    In addition to Don's suggestion. Remember that almost any action in the viewer will cause a post back - including clicking on the export button. If the report is not in session, the post back may fail and nothing will happen. See the following code on how to place a report object into a session:
    1985571 - How to use sessions in web applications using the Crystal Reports viewer (the complete code)
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Smart form printing issue with LOCL printer and SAP printer

    Hi,
    The issues are as follows:
    1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
    2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
    In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
    Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
    What can be done to the reports to allow them to print on our HPLJ4?
    Thanks,
    Babu

    Hi Prathap,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
    Color: White
    Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    Please change the shading for window MAIN -> tab 'Output Options' to:
    Color: Black
    Saturation: 0%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Prabhu

  • Smart form printing issue with LOCL and SAP printer

    Hi,
    The issues are as follows:
    1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
    2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
    In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
    Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
    What can be done to the reports to allow them to print on our HPLJ4?
    Thanks, Prathap

    Hi Prathap,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
       Color: White
       Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    Please change the shading for window MAIN -> tab 'Output Options' to:
       Color: Black
       Saturation: 0%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Aidan

  • Printing Issues with HP OfficeJet 100 and Windows 8.1

    We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

    Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
    I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
    I would like to make some suggestions that may help. Let me know how it goes!
    1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
    Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
    Try to install
    2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
    How to disable realtime scans
    Try the install
    3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
    Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
    Try the install
    Enjoy your Monday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printing issue with DeskJet 6940

    About every 20 pages or so, printing in portrait mode, the printer does a form feed after printing about 1 1/2" of text. It happens intermittently, and there is no apparent logic or pattern.
    I have reinstalled the driver, changed the USB cord, but to no avail. My LaserJet CP3505 on the same computer does not exhibit this issue.
    Using Windows XP with SP 3, Dell Dimension 3150 with 3.25 GB ram. It also happened with earlier XP versions, so its not an operating system upgrade problem.
    It happens with B/W or color printing, always using 8 1/2 x 11 paper from the upper tray. It does not appear to happen when printing in two-sided mode.
    I don't know what to try next! Does anyone have an idea?

    I have an older HP non-wi-fi printer connected to my Apple Airport Express wireless router which includes a USB port. This makes the printer available with my wireless network which I've used for printing wirelessly with my former Apple PowerBook and now with my MacBook Pro for years. I'm now able to print from my iPhone and iPad as well.
    You need to have the printer connected to a wireless router for your wi-fi network, or purchase a printer that is wi-fi capable and if you do that you might as well purchase an AirPrint compatible printer which doesn't require a wi-fi printing app purchased from the app store.

  • Hierarchy issue with Web Intelligence Report

    Hi All,
    We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
    BEx query shows correct data in RSRT with hierarchy nodes.
    We have built a Universe on top of this BEx Query.
    We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
    Please suggest, why such behavior with OLAP universe and how to resolve this?
    Best Regards,
    Ashish

    Thanks for your suggestions.
    I am little confused on how to check SQL generated for OLAP WebI Query.
    But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
    Do you know how WebI behaves with BEx hierarchies?
    There has to be some setting to make it work...
    Best Regards,
    Ashish

  • Issue with CRS Historical report scheduler

    Hello guys,
    I have a customer with ipccx 5.02 .
    THe customer could execute manual reports but  the  scheduler reports doesnt work.
    I follow the IPCCX troubleshooting guide :
    1.Stop and start scheduler service.
    2. Connectivity is fine.
    I dont receivce any error from CRS client , i need little help im new in IPCC world?
    Any suggestions please?
    Thanks,
    Carlos

    Hi Anubhati,
    PC is logged during the time that scheduled is programming and also is not in sleep mode.
    I have download the CiscoSch log from CRS Historical report and i found i issue with license :
    INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
    104 ERROR  Jan 19 2011|17:00:45 Getting of total available license info failed
    105 ERROR  Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
    I have the following license :
    UCCX enhanced
    IVR ports 150
    Enhanced seat 22
    CCX Maximum agents 300.
    I generated a report for see how many agents is logged in = 15 .
    Regards,
    Carlos

  • Issue with exporting Financial Report in Smartview 11.1.2.2

    If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
    I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
    So the issue is only with the FR using Shared members.
    Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
    Thanks

    Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
    Thanks for your help John.

  • Issues with BI publisher report in dashboard

    Hello all,
    I got some issues about BI publisher reports in a dashboard.
    I use a dashboard prompt in combination with a BIP report.
    1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
    So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
    2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
    3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
    4.) I can't use I-bots on BI publisher reports, or can I?
    5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
    Hoping for some answers ;)
    Thanks in advance!
    Message was edited by:
    Remc0

    Hi Venkat,
    Thanks for your quick respond.
    1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
    2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
    3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
    4.) Ok, I will have a look on that.
    5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

Maybe you are looking for

  • Issue with .jar file (double clicking)

    Hi. I've been having a problem with a certain .jar file when I attempt to double click it. From my understanding, I was under the impression that when someone double clicks a .jar file, the contents are supposed to execute by itself (kind of like a .

  • Partner bank type missing in custmer invoice.

    Dear Experts: I want to netting vendor and customer invoice usting F110. (The vendor is also the customer) Partner bank type should be the same so that these data can be groupped together when netting. But the Vendor invoices have the partner bank ty

  • BW table name

    I require 1> Table name for number of packets loaded in each request.

  • Receiving Transaction

    Hi all We created a purchase order and received the quantity in inventory. when I am checking the receiving transaction Table one item only received but one transaction got stck in the receiving transaction interface nowhow to clear the stucked recor

  • WRT54G.connection help needed

    so here is the problem,do not have great computer knowledge so i will try to explain in my terms. im presently online using my router although it does not connect automaticaly when turn my computer on.well it says that the internet is now connected a