Printer keeps showing "not connected" in ePrint - HP LaserJet Pro 200 color MFP M276nw

The printer works fine for a while, then goes offline.  I've basically got to kick start it again to get it to reconnect to web services.  There's got to be a better way?  This thing seems buggy.

So the printer is going offline and you are losing your web services?  Have you updated the printer's firmware, yet? There is actually a fix for this at www.hp.com/support.  Just select the green box that says Software and Drivers and type in the name of your printer and press the enter key.  Next, select the operating system of your computer, download and install the firmware update located on that web page.  If you have any more questions I am more than happy to help.  
However, if this doesn't fix the issue, I will need to know some more information.  Like what is the operating system of your computer (Windows 7 64 bit, Windows XP 32 bit, Mac OS Version 10.8, etc)?  How is the printer connected to the router (ethernet or wireless)?  Are you having any other problems as well (please be specific with any error messages if so)?  What is the printer's IP address? And lastly, are any other devices having similar problems?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

  • HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

    The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue. 
    Is there a way to check the status of the embedded web  server through the control panel on the printer? 
    Are there any other steps we can take to restore the embedded web server? 
    Thanks in advance. 

    Hello csandrews68,
    I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
    I suggest restoring the network defaults on the printer:
    From the home screen on the printer push Setup (wrench and gear icon)
    Go to and select Network Setup
    Push Restore Defaults
    With defaults restored, connect the printer back to the network and try to load the EWS.
    Let me know if that helped.
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

    Hello
    I've setup my LaserJet Pro 200 color MFP m276nw to connect to my home network using a wired connction.
    When connected directly to my router the connection initializes and successfully recieves an ip address. I've been able to access all the network function connected to my router directly either wired or wirelessly.
    I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with every other sevice in my network, including a few game consoles and a Mac Mini.
    Is there an advance network setting I should be looking at?
    Thank you
    This question was solved.
    View Solution.

    Hi,
    Remove any wired connection before attempting to connect via wireless.
    Print off the printers network configuration and check the settings against your routers settings.
    Ensure that router and printer are using the same frequency.
    Review this HP posted information once you have the above information in hand.
    This information might also be helpful.
    Review page the wireless setup information starting on page 115.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • HP Laserjet Pro 200 color MFP M276nw, cannot air print

    Madam/Sir,
    How do I install air print on my HP Laserjet Pro 200 color MFP M276nw so that I may print using my apple devices (ipad, iphone). Currently I can only print through wireless connection which is 'moody' - doesn't print at times.
    Regards
    Rahul

    Hi,
    It supports AirPrint as shown:
        http://support.apple.com/kb/ht4356
    Please read on the first page of the above link:
    How to print in iOS
    You can print from Apple apps like Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, and more. Many apps available from the App Store also offer this feature.
    To print, follow these steps:
    Tap  or  at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Make sure that you are on the same network as the AirPrint printer that you want to use. All AirPrint-enabled printers on the same network should be displayed, including those that are properly configured for a Wide Area Network (WAN).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp laserjet pro 200 color mfp m276nw no print preview

    Hello Folks,
    I have windows 7 64 bit HP laserjet pro 200 color mfp m276nw and do not see a print preview option. Is there a way to get this? In Linux I use print to ps file and ghostscript to view. Our oldink jet had a print preview option. I did see a message for another printer that there is no solution. Any help would be appreciated.
    Thanks
    timkat

    Hi @Timkat ,
    I understand that you would like to know if the printer has a print preview option. I can help you.
    You would have to use the print preview, from the application that you are printing from, under File, Print Preview.
    Most applications have this feature.
    Hope this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 color MFP M276nw - Printing problems with HPeprint App on Ipad mini

    Hi,
    my name is Domenico and I have the following problem:
    I have setup my HP LaserJet Pro 200 color MFP M276nw in HPePrint App on my Ipad mini, but I am able to print directly.
    When I send a page to print through my tablet, on the printer screen I can see the following message:
    "Manual feed.
    Plain, A4
    Or press [OK] to use available media"
    So, I have to press OK on the printer screen to print the page. 
    How can I avoid this problem?
    Thanks,
    Domenico

    solved!!!
    Domenico

  • Bluetooth connectivity on HP Laserjet Pro 200 color MFP M276nw

    Madam/Sir,
    Is there bluetooth connectivity on HP Laserjet Pro 200 color MFP M276nw?
    This question was solved.
    View Solution.

    Hello there,
    I've looked up the specification sheet for you, and no, unfortunately there is no bluetooth feature.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=ca&dlc=en&docname=c03315988
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Blank pages when printing to laserjet pro 200 color MFP M276nw

    When printing to my Laserjet pro 200 color MFP M276nw, the pages are all blank.  I have tried turning the printer off and tried unplugging and replugging.  That didn't help.  Pages are still blank.  Any suggestions?
    This question was solved.
    View Solution.

    Thanks Regents Professor!  I just kept trying and it now works!

  • Laserjet pro 200 color mfp m276nw stop printing memory low

    laserjet pro 200 color mfp m276nw stops printing giving an error message that the is memory low. How do I clear the memory?

    I have had the same issue, cannot print multiple pages without having the memory low error appear.  I have cleared the faxes from the setting menu. I have done an NVRAM reset and am able to print a 3 page document once and then receive the low memory error when I attempt to print another 3 page document. Please PM me the way to resolve this problem.  Thanks in advance.

  • Duplex printing not available on HP LaserJet Pro 200 color MFP M276nw

    There are multiple posts on here and all over the internet from Mac users who simply want to print duplex, but I don't see any answers, so I thought I'd add my voice with a new post and see if it gets any attention beofre I start emailing HP's support VP directly.
    I'm using Mavericks and have downloaded the latest HP driver.  The 2-sided printing option is greyed out.
    This is a fundamental problem.  Come on HP, this is not good enough.

    Hi,
    The Twwo-Sided option expected to be grayed out as the M276nw does not support automatic duplexing.. you may find the product specifications listed below:
    http://shopping.hp.com/en_US/home-office/-/products/Printers/HP-LaserJet/CF145A?HP-LaserJet-Pro-200-...
    You may perform manual duplexing by opening the print dialog, click the lowest drop down which appear as the name of the software (e.g. TextEdit / Safari, will appear as Copies & Pages within MS Office).
    Select Manual Duplexing and change the settings as required.
    If you cannot see such an option, go to System Preferences > Printers & Scanners and click the plus sign.
    Select the listed printer and set the Use drop-down as the pritner model rather than the default AirPrint option.. then the Manual Duplex option should appear.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Unable to Add Printer (HP LaserJet Pro 200 color MFP m276nw) as a New Device to HP Connected Account

    (A)  When I click "Print Information Sheet" on the HP Web Services tab/ "Web Service Setup" to obtain my printer's email address to use in the claim code box...NOTHING HAPPENS.  No claim code, No email address
    (B) When I click "Print Information Sheet" on the HP Web Services tab/ "HP ePrint" to obtain my printer's email address to use in the claim code box, I get the following error message:
    Connection error.  Check Internet connection
    [email protected]
    If I try to enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
    (C) If I use the printer's email address obtained from the Printer's Configuration Report and enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
    What do I need to do to correct this?

    Seems that HP is not supporting your printer, it is written on the specs that it supports but in fact its not the case!!!
    Check on the following website if your printer is available
    http://support.hp.com/hr-en/document/c02814760

  • LaserJet Pro 200 color MFP M276nw prints image shifted 1/2" from top of page.

    When printing any report, diagnostic or form from the machine system I get printed image shift approx. 1/2" from the top.
    Is there any adjustment that can be made to the MFP to center image?

    Hi @patrick22152, 
    I understand that when printing documents or a printer hardware self test, it shifts 1/2" from the top of the page. I can help you with this.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    It sounds like the paper isn't feeding properly. Since you are having this issue with the hardware tests and printing from the computer. If it was just the computer, I would check the paper type selected in the print driver, to make sure it isn't set on the proper paper type and not the default unspecified paper.
    Try another type of paper to see if you get the same results.
    I have provided a document with some steps to try to see if that will resolve the issue.
    'Load Paper' Error Message Displays and the Printer Does Not Pick Up or Feed Paper.
    Disregard the title.
    Here is a example of how the Configuration Report should look like.
    Printing a Configuration Report.
    Run a cleaning page:
    From the Home screen, touch the Setup button.
    Touch the Service menu.
    Touch the Cleaning Page button.
    Load plain letter or A4 paper when you are prompted.
    Touch the OK button to begin the cleaning process.
    What size and kind of paper are you using?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet Pro 200 color mfp m276nw, black prints, black bars

    Read the two previous reports and the possible remedy from December 2014,but still not solved. Has there been any new solution to this problem on a nearly new MFP.

    Hi @PaceS,
    I read your post and see that you are getting black bars when printing in black. Please clarify if this isn't correct. I would like to help you.
    I would do a hard reset to see if will help.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document with the steps for calibrating and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue. Some of the steps you have already tried, but please try the other steps listed. Troubleshooting Print Quality Issues.
    Print a Diagnostics Page: Go to Setup, Reports Menu, Diagnostics Page.
    Update the printer's firmware. Software and Drivers. Select Go under Option 2.
    Have you tried a new toner?
    Are you using Genuine HP Toner?
    What are the toner levels?
    What were the results of the Print Quality Page and Diagnostics Page.
    This will help determine if it is just one specific toner, possibly a fuser or hardware issue with the printer. Feel free to include a screen shot of both pages.
    If you appreciate my efforts, please click the Thumbs up button below.
    Please let me know the results. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I cannot print to a laserjet pro 200 color MFP M276nw

    I can scan from it and save the image, but if I try and print the image I get a printer error.  I can print from any other program other than photoshop elements

    In Windows, go to Control Panel>Devices and Printers.
    Right click on the printer, then Printer Properties>General.tab.  Rename the printer  to something short, like "My Printer".
    That may fix it. Please let us know.

  • LaserJet Pro 200 color mfp m276 Printing issues

    I have had this printer for about a year now.  Now it has started printing solid black lines across the page I am printing, whether it be from my computer or a fax.  I can run the cleaning process from the printer and its fine for a few hours and then back to the solid black lines.  It gets so bad there is more ink on the paper than white when it does this.  Have tried everything I can think  of to cure this to no avail.  I am running hp cartridges and just plain white paper.  Any ideas as to how to fix this.  These lines are thick lines, just not _____ but are about 1 " wide each.
    I really need help with this really soon or I will have to replace it with another brand.  I use this in my office and can't have important faxes coming across with all these lines so I can't read it.  I posted this Saturday and still waiting for someone to respond.

    Hi @RandallRaley , 
    I understand that when printing, you are getting solid black lines across the paper and now on the back of the paper. You are using HP cartridges, plain paper and have ran the cleanings with the same result. I can help you today.
    Try another type of 20lb -24lb plain paper to see if you have the same results.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
    Select your operating system, click next, click the link for firmware.
    Try printing again.
    If the issue persists, follow the steps for aligning and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue.
    Troubleshooting Print Quality Issues.
    How is the printer connected? (USB/Ethernet/Wireless)
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Are you getting the black lines on the Hardware Self Tests also?
    Where is the printer located? (on a desk, on a enclosed shelf in desk)
    What kind of paper are you using?
    What is the weight of the paper?
    Was there any black on the toner?
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • Very Bad Experience with EDGE Program, Trying to get a resolution for 2 Months

    This is long winded but a lot has happened in two months. My wife and I are both on the Edge program. When she initially signed up for the program she got the Iphone 5. She ended up having some technical problems with the screen on her phone so she t

  • Report Developed in Webi Rich Client Consuming more time in Data Retrieval

    Dear All, I am a BO Consultant, recently in my project I have developed one report in Webi Rich Client., at the time of development and subsequent days the report was working fine (taking Data Retrieval time less than 1 minute), but after some days i

  • Win 7 AutoAdminLogin not working before May Patching..??

    Problem : registry hack has been applied, gets to the point where user name is in, password is in and that's it.. You have to hit enter or the arrow and it logs in happy .. SO.. the registry data is correct, however something seems to be stopping the

  • Wrong file size in Encore?

    Hi, can anyone help? I encode a file into mpeg2-DVD fith file size approx. 4GB. When I import this file into Encore CS4, the program shows that this file will NOT fit into DVD-5. It shows about 8GB file size. Why? If I import the same file to Encore

  • Making Template Shifts page to right!

    I have a site that I have done 3 pages for and I'm making them into templates but as soon as I put an editable region in the whole pages shifts right in Dreamweaver. It doesn't effect the look on the web but look bad in dreamweaver. I dont know if yo