Printer names in print dialog box
When I print a document the printer list contains printers I no longer own or with network addresses that are no longer valid/active. There are only two printers in printer Setup Utility but 5 or more in the print dialog box (even more when printing from a Classic application).
How do I delete these printers? A search of the hard disk does not find the names shown in the list and the various ppd folders do not seem to contain these printers (at least under the names given in the dialog box).
Thanks
Roger
G5 Mac OS X (10.4.8)
Thanks - all gone!
Printing Prefs are files named com.apple.print.*
I think it will be in one of those. It doesn't hurt
to delete them (except if you have some presets you
want to save, don't delete the presets one). Do File
Find file.
Similar Messages
-
I just installed the Canon MP160 printer. I downloaded the driver software from Canon version 12.1.4.0.(2/8/2008). I can print documents fine from Internet Explorer. When I go to print from Firefox the printer dialog box says the printer is "off line" and I get printer queue error messages. I can also print OK from windows. I have a PC 32 bit with Windows Vista.
PAHU wrote:
I think your issue is that even though you have the latest 10.2.0 driver for 10.9, you added the printer using the previous v2.43 PPD. So open Print & Scan, remove the current printer for the iRC3380 and click the plus button to add again. After selecting IP > LPD and entering the IP address, ensure you select "Canon iR C2880/C3380" in the Use menu. Note that there is no mention of UFRII in the model name, as is the case with the previous UFR2 v2.43 driver.
Thanks for the suggestion. I did that this morning (see Step 1) and deleted the existing printer before re-adding a new printer and using the newly updated driver and printer description. Here's what I get:
You can see my model number is listed in there as is the the proprietary Canon UFRII language.
Once added, here's what happens next:
So it would appear, at this point, that the printer is installed and communicating and that I should be good to print.
Alas, I get the same error message I've been getting. back to square one. -
I followed directions of another blog and when I got to the Separator Page dialog box, it said to "delete all templates listed in the Separator Page box", but mine was blank. If I click on the browse button, I do find pcl,sep; pscript.sep; sysprint.sep; and sysprtj.sep files. Do I delete these sep files? I have a HP Photosmart C7280 All-in-One Printer and am using Windows 7 (had same problem with VISTA).
I had this issue using FF 5.0, I fixed it by doing the following :
# Go to firefox button, select options, options.
# Find all the applications that are listed as Adobe
# Change the action from 'Use Adobe Reader (in FireFox)' to 'Use Adobe Reader'
Fixed :) -
Firefox 5.0 won't print web page - no dialog box
After updating to FF 5.0, I can no longer print using File>Print (or Control+P). No dialog box comes up, no error message - just nothing. My printer is an HP Deskjet D4260 and it prints fine from Internet Explorer or from files saved to my computer.
I tried a couple "fixes", including disabling HP Smart Web Printing and resetting the print.print_printer file from about:config. Neither option worked. Please help!
Thanks!Is Fixed! Someone suggested clearing the Firefox cache 9 (Preferences / Advanced / Network / Clear Now) and and after doing this now we can stream on the YouTube site as normal.
-
MULTIPLE PRINTS FROM MB90 WITHOUT DIALOG BOX
Hello Friends ,
I am to take print of goods receipt voucher from MB90 .
i have attached my smartform and program their its working fine , but i want to
print of all the documents together not indididual , for that i have suppressed the dialog box but
at a time time its giving only one print .
kindly explain me with elaborated steps .
Regards
Digvijay RaiHello Friends ,
I am to take print of goods receipt voucher from MB90 .
i have attached my smartform and program their its working fine , but i want to
print of all the documents together not indididual , for that i have suppressed the dialog box but
at a time time its giving only one print .
kindly explain me with elaborated steps .
Regards
Digvijay Rai
Hello
Are you taking the user´s printer?
All the goods receipts are in a internal table? If so, you can do a loop in this internal table and call your smartform.
Post here your solution, we can discuss about it
Kleber Santos
Edited by: Kleber Santos on Feb 1, 2009 5:32 AM -
Secure printing problems with the dialog box
Hi!
Some one which has problem with the scure dialog box then using secure printing?
then we print in Adobe acrobat reader X 10.0.1 the dialog box for entring your pin nummer appearing under acrobat, causeing the program to locking until you go to the dialog box and clicking on it and enter the pin. The problem is that adobe not showing the dialog box in front of the printing overall dialog.
had nog problem with the old 9, it started then we uppgraded. Haw tride a nother driver but haw same issue. And all other programs works greate, word, notepat etc so it is just Adobe that has the problem.. ?
/JHi!
Its´s XP sp3 and the printer is a network printer(Toshiba e-studio 4520c) running a PCL6 driver.
Screen capture is not so much to see i think, running Swedish interface to. The ordinary dialogbox för printing is the first thing thats pops up, and then adobe reader frezes because the secund box pops up under adobe, you can click on it in the "toolbar" to continue. One thing that is diffrent when you print in adobe is that you can se on the "toolbar" for the popup box for the pin/password box is a Adobe icon on it. It is not so in example when printing in word, ie8 etc.
The problem is that many users dont see it and thinks the program has stopt working.
Im now going to try the PS driver from toshibas homepage..
thanks for help! -
I can no longer print email from my gmail account. when I select "print all" link, a dialogue box opens attempting to save as file type .xls. another dialogue box says firefox is preparing file... meanwhile firefox locks up.
Is your printer selected?
Or are you printing to XLS? -
I save batches of records from an info source and need to give them memorable names as I download them, so that I can find the correct record again easily. Currently the system just calls them, e.g. wrlb, wrlb[2], wrlb[3]. When I used IE, I could type a filename into the dialog box as I saved, but Firefox doesn't seem to have any option to rename. Can anyone point me to a solution?
See Tools > Options > General|Main : Downloads : "Always ask me where to save every file"
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.5.0_17 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
Specify the output file path and print name when printing pages
hi,
how can i Specify the output pdf file path and print name when i am using the function PrintPagesSilent from AcroAVDoc Object.
My Code :-
Acrobat.AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");Dear Irosenth,
i try with different format (doc, docx, xls, jpg, bmp and txt) and it working successfully, but it give an random name for the file which saved in default folder for Adobe PDF print.
you can use the following function:
private void PrintPDF(string[] inputfilepath){
foreach (string path in inputfilepath){
Acrobat.
AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");
Boolean v = doc.PrintPagesSilent(0, ((Acrobat.AcroPDDoc)(doc.GetPDDoc())).GetNumPages() - 1, 0, 0, 1);doc.Close(1);
and calling it by the following code:
PrintPDF(System.IO.Directory.GetFiles("c:\\t\\printjob"));
copy all files that you want to convert in side the mentioned path and run it program, then check the defualt print path for Adobe PDF printer.
test it and reply me. thanks again -
To change the printer name while printing the invoice
Hi,
I have a requirement like if there is already an entry in NAST table with o/p type ZURD and printer name USJC-PM03,then an error message has to be displayed like 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' on the vf03 screen.
But even if I change the printer name from 'USJC-PM03' to 'LOCL',it is showing the same error message.This message should not be shown.
I have used the following code in the program.
lf_formname = tnapr-sform.
determine print data
PERFORM set_print_data_to_read USING lf_formname
CHANGING ls_print_data_to_read
cf_retcode.
IF cf_retcode = 0.
select print data
PERFORM get_data USING ls_print_data_to_read
CHANGING ls_addr_key
ls_dlv-land
ls_bil_invoice
cf_retcode.
ENDIF.
IF sy-tcode = C_VF03.
SELECT SINGLE * FROM tnapr WHERE kschl = 'ZURD'
AND nacha = 1
AND kappl = 'V3'.
SELECT count(*)
FROM NAST
INTO lv_count
WHERE objky = ls_bil_invoice-hd_gen-bil_number
AND kappl = c_v3
AND kschl = c_ZURD
AND ldest = c_PM03.
IF LV_COUNT GE 1.
Message e000(zup) with text-001 text-002 text-003.
ELSE.
determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = lf_formname
variant = ' '
direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2
OTHERS = 3.
call smartform invoice
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_appl_obj =
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = space
is_bil_invoice = ls_bil_invoice
is_nast = nast
is_repeat = repeat
importing document_output_info =
*Uncomented the line to get the spool id or OTF formatted data -
*NY047532
IMPORTING
job_output_info = w_job
NY047532
job_output_options =
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
ENDIF.
ENDIF.
When should be done for the error message not to be shown when the printer name is 'LOCL'.Hi,
Here my requirement is first the user has to check the nast table if there is any entry with o/p type ZURD and printer 'USJC-PM03' .If there is an entry then an error message 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' has to be displayed.
Then if i close this popup window which is showing error message and change the printer name from 'USJC-PM03' to 'LOCL', and click on execute button,the printer name is not getting changed and still the error message is getting displayed.How to remove this error message? -
Print Configuration Dialog Box
Hello all,
I want to enable the print configuration dialog box pop up when a button is clicked in vi.
This is standard windows printer configuration dialog box which pops up when any file (xls,txt etc.)
is tried printing.Any suggestions please ?
Also i have attached the standard windows print dialog box, just incase.
Thanks in advance,
Nalin
Attachments:
print.JPG 33 KBIn general use a property node with nothing attached to it in LabVIEW with the property Printing >> Default Printer or Printing >> Avalaible Printers to return the printers configured with Windows. One of these string items can be wired into the printer input of the report generation Print Report VI to select a printer.
In regards to the Microsoft Common Dialog 6.0 ActiveX controls, the printer selection from the dialog seems to be determined by the hDC output, which stands for hardware device context. If you modify the demo posted above to send in the appropriate flag value, either an informational or a direct hardware device context handle is returned in the ICommon property hDC. Input the flag value 512 to the ICommonDialog property Flags to return an hardware device context handle from the hDC property, or 1024 to return an informational device context.
More information about how to extract any meaningful information from this I32 number can doubtlessly be found at msdn.com, but I'm not sure personally how to do it. Specifically, here are a few posts to start your search at:
Using the Print Dialog Box
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vbcon98/html/vbconusingprintdialogb...
Common DialogControl Constants
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cmdlg98/html/vbidxCommonDialogContr...
Alternatively, consider avoiding the Common Dialog Control calling a dll that will directly return the selected printer name from a dialog:
http://support.microsoft.com/default.aspx?scid=kb;en-us;322710
Hope this helps!
Jarrod S.
National Instruments -
I have a canon MX 7600 multifunction printer. Each time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns. This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
We have a grant application form that applicants will complete. We have tested it by completing the form and noticed that if it is printed, all of the dialog box entries don't print, just what is visible on the form. Any fix for this?
Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy -
Print without dialog box, scripting php
I have build a php based application that has a printing requirement.
I would like the user to be able to print a simple html file to a network printer without seeing a dialog box.
the JS window.print() shows the user a dialog box. I would prefer the user bypass this dialog and just print some output generated by a php script.
this is probably the wrong forum to post this, but i didn't see much activity elsewhere and i figureds some type of unix command line print function might be the solution.
any thoughts?You will have to use a tool like swfstudio
or zinc to achieve this.
Flash itself can`t (and shouldn`t) override the systemwide settings . -
HELP: SP01: Printer Name is Invalid
Hello SAP Friends/Gurus,
I am getting "The printer name is invalid" error message in SP01, when trying to print in SAP:
Windows/NT error 1801 [
<my machine name>\<my printer name>]: "The printer name is invalid."
The thing is, my machine and printer name are both correct. I even tried changing the settings of my printer (from its hostname to its IP address) in SPAD. My printer is directly connected to my computer.
Also, I could not print using LOCL.
Any suggestions on how to resolve this? Thank you very much in advance!
Best Regards,
AlbertHai,
Are you using 'C' as your access method, check that.
This message indicates that the printer name is invalid or otherwise incorrect. Click on Start > Run, and enter the same UNC to see if the printer can be accessed manually. If attempting to set the printer as default, the printer name and the share name must match exactly same (case sensitive also).
Enter the UNC name of the printer (name and network path) as it is defined in the Microsoft Windows Print Manager.
For example:
P09330\P330
http://help.sap.com/SAPHELP_NW70/helpdata/EN/26/ceea3b31aac554e10000000a114084/frameset.htm
Regards,
Yoganand.V
Maybe you are looking for
-
PO - Item Data - Delivery Schedule Tab - Delivered qty, issued qty, GR qty
Hi Frens, In a Purchase Order, under Item data < delivery schedule tab, we have delivered quantity, issued quantity and GR quantity fields. Is there any TABLE to find out these quantities against PO. Thanks and Regards, CK Vikas
-
Missing photos in iPhoto '08 v. 7.1.3
This is hardly a "new" topic on this discussion but after trying every recommendation I have been able to find, I am still no further forward so would appreciate any other suggestions that might be forthcoming. When iPhoto is launched it shows, at th
-
I am new to iweb but was able to create and publish a site. All was well, people viewed it. My husband changed what was called "Site2" on the site to our family name. Once he published, you can no longer connect to the site. I click to "announce" the
-
when I have less than 40%,I can't open my camera,because screen begins to fade , just turns black and had to reboot , but if attached to charging all works.Please help me. IiPhone 6.IOS 8.3
-
319- split Structured material into component
HI all, You are splitting structured material into component by Movement type 319. Basically used in Retail, Now we have a scenario to split structured materrial into component at the time of good receipt & 319 fullfill our requirement.. But problem