Printer print size is very small. Do not have this problem with Internet explorer.

When I try to print something in Firefox, the printer print size is extremely small. I do not have this problem with Internet Explorer.

File > Page Setup - '''Scale''' <br />
100% or Shrink to Fit is usually best.

Similar Messages

  • Using Firefox 4.0.1, I am unable to "Compose", "Reply" or "Forward" messages in Yahoo Mail. I do not have this problem with Internet Explorer.

    Clicking on "Compose", "Reply" or "Forward" in Yahoo Mail does not do anything. I troubleshot the problem with Yahoo directly and they feel that the issue is with Mozilla Firefox. I do not have this issue when using Internet Explorer. Other buttons in Yahoo Mail, such as "Delete" and "Move" do work.

    I had the same problem and discovered it went away when I disabled the AVG Do Not Track extension on firefox.

  • I can't figure out how to make the print on webpages bigger. Right now firefox is making it very small. Not having this issue with internet explorer, so I know it's just firefox

    I'm on my company website and all of the content appears much smaller than usual. I can't find Tools to adjust the appearance. I check on Internet Explorer and the same website looks normal.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use one of these extensions to set a default font size and page zoom on web pages:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Using 3.6.12, when I enter a bid on eBay, FF immediately signs off eBay. Never had that problem with earlier versions. I do not have this problem with Internet Explorer.

    Using FF 3.6.12, I can log onto eBay, view my account, rate a purchase or win, and search for items. In other words, pretty much do anything normally on eBay.
    But if I try to enter a bid on an item, the program exits eBay.com and I get the "You've Signed Off. See You Again Soon!" screen. This happens every time I try to enter or re-enter a bid.
    I've been using Firefox for a few years to bid on eBay without any problems. This started as soon as I upgraded to 3.6.12 a month or so ago. Any suggestions?
    I've been forced to use Internet Explorer just to get on eBay and bid now. Not nearly as fast and elegant as Firefox. Help!

    To re-install Lightroom 5.4, there's no need to go back to the original full version and systematically re-install every upgrade you've ever purchased in order to re-install the latest version. All you need to do is re-install your most recent version (in this case 5.4), enter your Lightroom 5 serial number then enter your Lightroom 4 serial number when prompted. That's it.
    How did you first license the Lightroom 5 upgrade on your computer? Since it's not a subscription version, you must have received a version 5 serial number somewhere in the purchasing process. Without a record of that, Adobe Customer Care may struggle with your case.
    If you're running Windows, you can try running the free Belarc Advisor which often successfully retrieves your full serial number from inside your computer.
    Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

  • I can copy a URL, but cannot paste it in the body of an e-mail. Also doen't hypelink it. I do not have this problem using Internet Explorer..

    When I copy a URL and go to paste it in an e-mail, it won't paste. Some other box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When using Internet Explorer, I don't have this problem. I'm new to FF with a new computer.

    Did you try to use the keyboard to paste?
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete
    Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
    That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
    You can select the text and click that button to turn the link into a clickable hyperlink.<br />
    If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).<br />

  • I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.

    I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.  Apple, you have a quality assurance issue.  Don't be like Microsoft where they send out pieces of junk with testing it.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have a new IPhone5c and do not receive texts or calls from my daughter's phone. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot?

    I have a new IPhone5c and do not receive texts or calls sent from my daughter's phone; I'll call this phone 2. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot? My other daughter has a new IPhone5c too. She receives calls and texts from sent from phone 2. Any tips for remedying this problem?
    Thank you.

    Turn off iMessage in your phones settings.   Apple devices can only use iMessage to other Apple devices.
    Turning off iMessage will allow the messages to go as regular text messages.

  • Using windows 7 and FF4, randomly when I open FF all of my username and password info for my websites has been removed and i have to re enter my login info. I did not have this problem with 3.6.

    None of my security settings are being changed and this is not being caused by any anti spyware program. if I go back to 3.6 i do not have the problem. I have reinstalled FF4 and now, 4.0.1, thinking it might be corrected but still the problem persists and I get tired of having to reenter login information for 20 or more websites every couple of days.

    I also had terrible issues with 2 Wire Gateway and my mid-2010 MacBook Pro.  We changed to WPA2 and that seems to have fixed the problem.  The AT&T tech support person, Phillipines, was extremely helpful.  She went through network settings with me.  One interesting step was going into my DNS tab (Network Preferences and then Advanced Button) and replacing my entries with these:
    68.94.156.1
    68.94.157.1
    It's been several days and I've only seen a few random packet drops.  Still charging along at full signal strength.

  • V1.1 - Continuous Crashes! Did not have this problem with 1.0

    I posted a couple of days ago, still no changes. This is ridiculous. Adobe, why would you put out a faulty update? I had no crash problems with version 1.0 and though on the surface v 1.1 APPEARS to be faster, I can never keep the program on long enough to truly find out. When I try to change an image star rating or undo a processing edit, I get nothing but crashes...literally every couple of minutes.
    Now I've been having problems unistalling v1.1 so I can re-install v1.0. This is extremely frustrating, what are we supposed to do for help?
    System:
    PC Windows XP service Pack 2
    P4 3.2ghz
    2.5 GB of RAM

    Well, one issue that you may be having is that your hard drive is
    reaching the practical limits of capacity, and is probably horribly
    fragmented.
    At 90% capacity a system drive basically becomes unusable, you are at
    83% capacity.
    It's something that needs attention that you might want to take a look
    at, since for a given library LR creates a billion gazillion files and
    folders (or at least it looks that way), and it becomes VERY disk
    intensive regardless of actual RAM.
    When you say it didn't see your previous catalog, have you tried opening
    and converting some old backup that you may have of the V1.0 versions. I
    haven't really been following this thread, but many people are just
    having trouble FINDING their old library for V1.1 to open and convert...
    once they find the old library, everything is hunky-dory. You may want
    to do a global search for " *.lrdb "
    [email protected] wrote:
    > My pc is Dell system is about 1 1/2 year old. I upgraded memory = (1)x512 & (2)x2gb.
    >
    > I currently only have about 25gb of free hard drive space on my 145gb drive.
    >
    > I'm not sure why v1.1 would have problems running on the system when 1.0 was fine.
    >
    > I have finally successfully uninstalled all to do with previous 1.1 installation and since it did not see my previous catalog, I set a default and am now importing a couple of image collections that were previously worked on in v1.0. So far so good but the test will be once I start batch editing and rating again. (side note, importing seems faster, especially when not rendering standard size previews.)
    >
    > Thank you both for responding and will continue to post results. *fingers crossed*

  • I have iMac OS 10.6.8 and FF 6.0.1 when I print pages, the type is large and does not print on the page. Safari does not have this problem. How do I fix this, or return to lower FF version ?

    To clarify, when I print the text is so large that it exceeds the page width. I can print same doc using Safari without any problems

    The sound seems very faint but can here static on playback.

  • How do I set page zoom? Page is to small, have trouble reading.....I never had this problem with internet explorer, there was a zoom bar at the bottom of the page.

    How do I change the zoom or text size, I have trouble reading this size.

    '''jeffmc''': First, you are using a version of Firefox that has been superceded/superseded and is no longer supported. The current version of Firefox if 6.0.2; you are using version 5.0. Consider upgrading.
    *See --> https://support.mozilla.com/en-US/kb/Updating+Firefox?bl=n&s=update%20automatically
    If you are using the Firefox button instead of the Menu Bar, you will not see "View" at the top of the browser window or on the Firefox button menu.
    *You can temporarily display the Menu Bar by pressing the ALT key or the F10 key and make the selection from the temporarily displayed Menu Bar; View > Zoom
    *You can instead, use ALT+V+Z to get to the Zoom settings
    *You can use CTRL++ to zoom in, CTRL+- to zoom out, CTRL+0 (<--that is a zero) to reset the zoom to 100%
    *See --> [http://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] '''''and''''' [http://support.mozilla.com/en-US/kb/Text+Zoom Text Zoom]
    Add-ons:
    *'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
    *'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • When I copy and paste a link into the body of my email, the link won't light up in blue and underline becoming a working link. I do not have this problem with Explorer. Who do I get the link to work?

    Not sure what more I need to say. If you still don't understand, let me know.

    In Rich Text mode, there's an "Add a link" button (an Earth with two chain links in front of it) in the toolbar, which opens a window where you can type a web address. Yahoo! Mail then inserts it into your email as a link.

  • What is going on with all the ads lately? I do not have this problem with Chrome or IE and I have done the update.

    I've been a big fan of what you guys are doing for a long time but can not stand using the browser lately due to the pop ups everywhere. It makes me question the whole "Proudly Non-Profit" thing.

    Do you have the pop-up blocker enabled?
    orange Firefox button ''or'' classic Tools menu > Options > Content
    Is there any pattern to the ads?
    In case it's a rogue add-on, could you disable all nonessential extensions here:
    orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions category
    After restarting Firefox, do you notice any different in the number or type of pop-ups?

  • I cannot use Microsoft Hotmail with Firefox 3.6.24 and Windows 7. I click on an email but nothing happens. I did not have this problem with Windows Vista. Any solutions would be greatly appreciated.

    The Windows 7 is on a new Dell Inspiron desktop. The Windows Vista is on a Dell Studio laptop that I have had for a while. The Hotmail also works fine on the new computer when I use IE9.

    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.2 r152
    # Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    *http://www.mozilla.com/plugincheck/
    Update the Flash plugin to the latest version.
    *https://support.mozilla.com/kb/Managing+the+Flash+plugin
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    Update the Java plugin to the latest version.
    *https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • There is a problem with the mail updating automatically in the toolbar at the top of the page ! my seeting s are correct. i did not have this problem with early versions!! not good,

    firefox wont update the mailbox to inform you you have new mail.
    preivious version was ok.
    all settings are correct .
    tried starting new and still the same

    Sorry, that "mail" thing isn't a standard part of Firefox. Seek support from the developer of the add-on you have installed that added that feature to Firefox. Support contact information should be on the download page for that extension.

Maybe you are looking for

  • Problem with printer on airport that was working 3 weeks ago.

    Hello I have an airport extreme and have connected to it an epson sp rx700. 3 weeks ago when I last used it, it was working fine. I have a macbook too which I print wirelessly through the extreme too. Yesterday I tried printing on my imac and it reco

  • Combined PDF page display speed difference between Acrobat 8 Pro and Acrobat X Pro

    I have encountered a display speed issue with regards to combining Tiffs with Acrobat X Pro.  The Tiffs are between 200 KB and 600 KB.  Tested the issue by using a series of Tiffs originally combined using Acrobat 8 Pro but used Acrobat X Pro to comb

  • My computer starts but then immediately shuts down

    Computer starts but quickly shuts down.

  • Scheduling Manager hangs...

    Hello, We are using Discoverer Plus 10g (10.1.2.45.46c) and migrated from an earlier version (4i) spring of 2006. - I am trying to schedule a workbook with multiple sheets created with the new version. - The workbook executes in about 4 minutes, when

  • Location of Apex 4.0 themes.css file

    Hi, I want to change/manipulate the size of the fonts, text wrap for the Interactive reports in APEX 4.0. I have read that it is possible by editing the themes .CSS file. Please advice me how can I do it.What is the location of themes.CSS file , how