Printer problem (after upgrade)

My Canon S750 was fine until the last upgrade. Does this has anything to do with the "replacement" of gimp print by gutenprint?
# lpstat -p
printer s750 disabled since Thu 31 Aug 2006 08:58:40 PM UTC -
Filter "rastertoprinter" for printer "s750" not available: No such file or directory

I've been abroad so I took a while to reply...
It turned out that reinstalling the printer didn't work.
a snip of my /var/log/cups/error_log.
d [10/Oct/2006:17:28:12 +0000] [Job 303] cups_get_params(0x860ad64, 0xbf9584dc)
d [10/Oct/2006:17:28:12 +0000] [Job 303] before gdev_prn_get_params()
d [10/Oct/2006:17:28:12 +0000] [Job 303] after gdev_prn_get_params()
d [10/Oct/2006:17:28:12 +0000] [Job 303] Leaving cups_get_params()
d [10/Oct/2006:17:28:12 +0000] [Job 303] cups_get_matrix(0x860ad64, 0xbf958504)
D [10/Oct/2006:17:28:12 +0000] [Job 303] cups->header.Duplex = 0
D [10/Oct/2006:17:28:12 +0000] [Job 303] cups->page = 1
D [10/Oct/2006:17:28:12 +0000] [Job 303] cupsPPD = 0x869cda8
D [10/Oct/2006:17:28:12 +0000] [Job 303] cupsPPD->flip_duplex = 0
D [10/Oct/2006:17:28:12 +0000] [Job 303] width = 4792, height = 6783
D [10/Oct/2006:17:28:12 +0000] [Job 303] PageSize = [ 595 842 ], HWResolution =
[ 600 600 ]
the above lines keep looping for the same job, but meanwhile the printer stays quiet. After I cancel the job lpstat -t returns "Printer not connected".

Similar Messages

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

Printer problems after upgrading. My kodak esp 5250 says it has the printer head jammed. Reloading the software let it work once. Obviously an interaction problem with Lion. Any ideas?

Printer problem. Since installing Lion my kodak esp5250 all in one says the printer head is jammed. It isn't. Reinstalled software and it worked once but still gives printer head jammed message. Any ideas?

Only the obvious one: do you have the latest driver, and does that cope with Lion? Kodak's stated requirements include this, which is slightly suspect. Obviously an interaction problem with Kodak? Try exploring whatever help Kodak have.
System Requirements
Operating System Compatibility
MAC OS X 10.6.x, MAC OS X 10.5.x, MAC OSX 10.4.8 or higher required
Processor Speed
PowerPC G4, 1.2 GHz

Printer problem after upgrade to OSX Mavericks

Help!! My Canon MX310 printer no longer works after I upgraded to OSX Mavericks. Does anyone else out there have the same problem or point me to a potential solution? Thanks

First and probably the most important is go up to your Black Apple uuper left and do the Software Update. Double check that your plugged in to the USB port on your Mac. Restart the Mac and you should be good to go. Iwould also go to Canons web site and make sure there are any New Drivers for Mavericks.

Printer problem after upgrade to Snow Leopard

My trusty HP Deskjet 1200C printer keeps giving an error now I have upgraded to Snow Leopard (on the way to Lion for iCloud). I checked for an upgraded driver on the HP site but there doesn't seem to be one after OS 10.6
I am getting this error - PrintJobMgr failed
Any suggestions welcome and advice for what will and won't work with Lion.
Thanks

Try to restart, see if problem still happens.
If it does.. remove printer (and other periferals) from the computer and do an SMC reset. Also unplug your printer's power as well to rest it too.
Also, do a PRAM reset.
Let us know how it goes.
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964

Solutions for printing problems after upgrade to Lion?

Since upgrading to Lion, I am having problems getting accurate colors to print with my Epson Stylus Pro 3880. I have the latest printer driver, and my screen is calibrated. I would appreciate any ideas of what to do.
Thanks -
Dudley

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

Printing problems after "upgrading" to Snow Leopard

Under Leopard my two printers (HP Deskjet 970 Cxi and Epson Stylus Photo 2100) worked just fine.
With Snow Leopard the quality of the prints with the two printers is simply bad. The print-driver is: gutenprint v5.2.3 even an upgrade to gutenprint v5.2.4 did not make any difference.
When printing a test page with the Epson Stylus Photo 2100 the printer simply pauses during the print somewhere along the test page. When the printer is started again (green button in the printer window) it starts printing from the beginning again and pauses again. Useless!

Eric,
For the Deskjet, I'd suggest using the Leopard drivers (off of the Leopard DVD). They will give you much better quality printing, although you'll have to deal with lack of features printing from 64-bit apps. The easiest way to work around them is to print through Preview an force Preview to run in 32-bit mode.
The other option would be to install the [HPIJS|http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macos x/hpijs] drivers.
Just trying to help.
Andrew

Printer problem after upgrading the Mac HD disk

After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Canon printer problem after upgrade.

Upgraded iMac to Yosemite 10.10.2. Now my Canon printer LPB6000-LPB6018 does not respond to print request. Even tho the printer is fairly new, I have forgotten what the procedure was in setting it up with Maverick that came with the Mac. Can it be set up again?

Also make sure you have the latest drivers, Apples latest for Canon is v3.1, should be available through auto update on App Store - if not you may have to go to the Web Site direct and download.

HT1338 Do I have to reinstall my print drivers after upgrading to 10.8? I seem to have lost both my printers and my ability to download from my camera. Never had problems with 10.7. I'm a little scared.

Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

How do I accomplish HP Officejet 6500A printer installation after upgrade to Windows 8?

How do I accomplish HP Officejet 6500A printer installation after upgrade to Windows 8?

Hi,
Please do not touch to the printer, run installation setup on Windows 8 (old or new) machine. The CD may not run at all, what is your 6500A ? E710* what is * ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer problem (after upgrade)

Similar Messages

Maybe you are looking for