Printer recommendations for airport express

Hi all,
I posted a question regarding printer compatibility with airport express. I already bought two and both were glitchy. I am trialing a canon s520 with the view of buying the new model. I put up a post, and got a lot of answers. Unfortunately some say one thing and some say the other. I have noticed that when there is a serious issue with apple equipment, the answers become garbled like this. BTW the s520 hangs a lot. So canon is out. Best advice i got from a couple of posts was dont both with wireless printing via AE. Buy a printer with its own wireless set up.
Dont get me wrong, i love the discussion groups and the advice i get.
My question is this..
Does airport express really work PROPERLY for wireless printing. I thought is was great feature. Would love to continue using it. But since tiger, i seem to have had a lot of time wasting problems. Is apple losing it... And surely they must have a list of recommended printers to work with AE.

My question is this..
Does airport express really work PROPERLY for
wireless printing.
Yes I have managed to get various printers working PROPERLY with my Airport base stations.
And surely they must have a list
of recommended printers to work with AE.
There is the unofficial list.
The iFelix unofficial Airport Extreme and Airport Express Printer Compatibility List
http://www.ifelix.co.uk/tech/1013.html
This is an unofficial list of USB printers which are are compatible with the AirPort Extreme Base Station and Airport Express. Printers in bold have been added to the original list that Apple provided. Printers in dark red are in fact the only printers I have personally tested.
Please also note that due to changes in the firmware of both the Airport Extreme base station and the introduction of the Airport Express some printers which are in this list may no longer in fact be compatible.

Similar Messages

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I set up wireless printing to my Airport Express?

I run my 17" MBP through a DLink wireless router which is located next to my modem in my basement. I have an Airport Express station (not the Base or the Extreme) which I used to use for wireless iTunes serving to my stereo, but which I now wish to use as a wireless print server in my study upstairs. I am not, however, using the Airport Express station for internet.
I can't find any useful instructions or step-by-step guides to set up a printer on my Airport Express. Can anybody point out how to do this and/or refer me to the appropriate KB article?
Many thanks,
Dustin LindenSmith
Halifax, NS

Yes but they don't seem to be making it to the post to be deleted Punctuation seems to be a possible cause
If your goal is to use one network with the AE and your other router online the AE needs to be connected to the modem as the base station as the AE can only be a wireless bridge with an Airport Extreme or connect the AE via ethernet from your other router
The printing is usually as easy as plugging in the printer and selecting it from your printer list AE is a print server and I use a 4 port hub with 4 printers connected They used to be listed as Rendezvous printers but lately mine are just showing as a connected printer but is printing wirelessly
Finder > Applications >Utilities > Airport Setup and Airport Admin utilities are pretty straight forward for setting up the routers. I have had and there are still issues being reported with the AE and certain configurations. My first gen MBP1.1 could see it but not connect and my MBP2.2 connected immediately and settings on both machines were the same.
Sweet Polly

Will Windows 7 print to a printer connected to Airport Express

I have a late 2010 Macbook Pro with Lion. Just did a clean install of Windows 7 64 bit using bootcamp. Hooked up my printer via USB directly to the MBP while in Windows and loaded printer software. Prints fine. Then removed USB cable from MBP and re-connected it to Airport Express. Windows finds and connects to my Airport Express fine. When I try to print a document, Windows does not see the printer on Airport Express. Will windows not print to a printer on Airport Express or do I need to somehow tell Windows that the printer is on Airport Express? The printer prints fine from the mac side of my computer.

BobTheFisherman wrote:
You have to tell Windows to print to a network printer. Did you set up the network printer in Windows? How many printers do you see in Windows? If only the USB printer shows up then you did not tell Windows about the network printer.
In Windows Start > Devices and Printers > Add Printer. Make sure you select the network printer to add not a local printer.
After some more research, I found that I needed to download and run Bonjour. Which I did, and it seemed to load fine. I then went to the printer properties, port tab, and went to IP_local and selected config port. In the printer name and address box I put 10.0.1.1 (for airport extreme) and selected Apply. After this when I try to print, I actually get "printer ready" in the print dialoge box. When I select print, the doc goes to the print que and it says "printing" then disappears, but nothing prints. I have done research on THIS issue now and have found many others with the same issue, but not sure of the answer yet. Maybe I need to use Generic Postscript, but I am not sure where this is.

Will any non USB printer work with Airport express?

WIll any non USB based printer work with airport express?

If you have an iPad, you might want to concentrate on printers that are AirPrint compatible, so that you can print from the iPad.
See this Apple support document for more details.
http://support.apple.com/kb/HT4356

How can I print from my IPAD3 to a printer connected to Airport Express?

How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

You cannot.
The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
"Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
http://www.apple.com/airportexpress/#wireless-printing
"AirPrint-enabled printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
http://support.apple.com/kb/ht4356
The HP ePrint app also does not provide such functionality:
Can I print from the HP ePrint mobile app using USB or Bluetooth?
No. You can only print directly to supported HP printers on a local wireless network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
Shlomi

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again.

PIN-based guest access for airport express

how do I setup PIN-based guest access for airport express?
I have a 2010 iMac OS X 10.6.8 and an Airport Express of the same era.
Thanx in advanced...
Siegfried

Hello Bob,
Thank you for your time on this. I apologize for not giving you a more complete picture of what was going on.
I should have included that I had already performed the steps that you shared and had gotten to the place where I would enter the PIN.
The problem was that, after entering a PIN that I had come up with, the "continue" button never became active. I called Apple Care and ended up talking to 3 different people before I found someone that knew the answer. The answer is that the guest computer (client) MUST be present inorder for me to complete the setup. So, problem is now solved. Thanx...
Siegfried

Printer connected to airport express...shows up on iMac but doesn't on my ipad 2. What am I missing, please?

printer connected to airport express...shows up and prints on iMac but the printer doesn't show up on my ipad 2 when I try to print. What am I missing, please?

Take a look at Printopia to see if it will do what you want.
There is a free trial, so you will know if it works before you buy. More info:
Printopia - Ecamm Network

If I have a normal printer plus an airport express device, do I need a wifi router as well?

If I have a normal printer plus an airport express device, do I need a wifi router as well?

Thanks LexSchellings
Eventhough if i connect it with the USB cable, but then i still need a wifi router to connect between Ipad and printer, am I right?

Is there any antenna for airport express?

I think i´m having problemas with the signal of my airport express and all the readings i made always refer antennas for airport extreme base station.
My question is, if there is any antenna for airport express that don´t needs an extreme base station.
Thanks
Ricardo
Pentium IV Windows XP Pro

Two quick things to check using AirPort Utility on both devices:
On your "main" base station
Open AirPort Utility - click Manual Setup
Click the Wireless tab/label located just below the row of icons
There must be a check mark next to "Allow this network to be extended"
Click Update to save your changes.
If you don't see this option, you likely have an older AirPort Extreme that does not support the "extend" feature. Please clarify on the version that you have
On your AirPort Express
Open AirPort Utility - click Manual Setup
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Name = Same name as your main network
Check mark next to "Allow wireless clients"
Wireless Security = Same setting as your main router
Wireless Password = Same password as your main network
Confirm Password
Click Update to save settings
If you do not see the "Extend a wireless network setting", you may have an older AirPort Express, or if you are sure that you have a newer 802.11n model, try holding down the option key while you click on the selection box to see if the "Extend" setting will appear.
Assuming no major obstructions between the main router and area that needs more wireless coverage, a good starting location for the Express would be a point that is approximately half the distance between the main router and the area that needs more coverage.
As I said, this feature works very well if major obstructions do not come into play.

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

Printer working but airport express is blinking amber

Hi. I configured my computer to print using the airport express and it is printing. However, the airport express is blinking amber. Does anyone know why and how to fix it so it is green?
Thanks!!!

I have read other posts that say to go to airport admin utility and check what the issue is (http://docs.info.apple.com/article.html?artnum=305101). the post says to install software that came with airport extreme - i don't have the airport extreme base station, only the airport express. so i'm not sure how to resolve the blinking amber light.
any help would be greatly appreciated!

Mini-UPS solution for Airport Express

Hello Airport community! This is my first post.
I'm wondering if anyone has had any luck with a battery backup (UPS) for Airport Express'. I have a larger UPS for my Time Capsule which is the main access point. I've hardwired this one into the network to broadcast the same network but extend the range. If the power goes off, since a number of devices are connected to the second, I'd like to have it on back up as well. However, it's installed very in a tidier manner in a smaller area – no room here for a big APC UPS.
I've been able to find 12 V battery backups, but nothing for the Airport since it's a 120/240 V input.
Anyone have any ideas of how this might be accomplished?
Cheers,
David

As a completely different kind of solution.. Although John's battery and car inverter idea is creative.. and will work..
Use an extreme or something else that is dc powered.. You can buy a cheap second hand extreme for $30-50 on ebay or whoever has your second hand market. It can even be a different brand.. tp-link, edimax etc.. most are 12v which is excellent.. then power it down the ethernet. So you don't even need a power point.
I'm wondering if anyone has had any luck with a battery backup (UPS) for Airport Express'. I have a larger UPS for my Time Capsule which is the main access point.
Plug the 12v power supply into your UPS.. with the TC.. and buy a set of injectors for ethernet..
They look like this.
http://www.ebay.com/itm/PoE-Power-Over-Ethernet-Injector-Splitter-Adpater-Kit-/3 60843249285?pt=LH_DefaultDomain_2&hash=item5403ef0685
Just a few dollars.. they passively use the extra pairs to carry power over the ethernet wiring.. you can also buy active sets but they are more expensive but keep the line at gigabit.
http://www.ebay.com/itm/TP-Link-POE200-Power-over-Ethernet-Adapter-Kit-Injector- Splitter-5-9-12V-DC-Out-/181210762297?pt=LH_DefaultDomain_0&hash=item2a3100cc39
I have not hunted for cheapest but I have tried to keep price in mind.
There was a time when Apple used POE in the old domed Extreme.. and that was very handy.. the Express should have always had it.. it is a natural to power over ethernet rather than require power outlet next to it.

How to find MAC address for WAN port for Airport Express 2nd Gen.

The New Airport Express has a LAN and a WAN ethernet ports. How can I find the MAC address for the WAN ethernet port as my Service Provider needs it for provisioning....I can fid MAC address for Ethernet and for two wireless 2.4 & 5GHz but not for WAN ethernet port using Airport Utility 6.1

Many thanks for the swift response. However, there is no WAN MAC address on the box or on the device anywhere. I even used magnifying glass to find one .
The airport utility shows only three mac addresses. One for 2.4GHz, one for 5GHz and one fo the ethernet (LAN port) whereas there is another ethernet port in the device mentioned as WAN port and I am still not able to find the MAC address for the WAN ehternet port for Airport Express (2nd Generation).
Will appreciate a response to make th device work wiht my service provider as providing them the WAN mac address is a must. Had there been an option for cloning mac address, the issue would have not been there.
Many thanks again - in advance.

Printer recommendations for airport express

Similar Messages

Maybe you are looking for