Printer will only print one copy no matter how many I put in.

Hi Im now using Windows 7 Word 2010 and since then I can only ever print one copy of my document no matter how many I ask for.  Has this happened to anyone else.  I have tried using a newer printer in the hopes it was a printer communication problem
but still only printing one document.  Was fine using XP but not this.  Any help would be greatly appreciated.  In business its very frustrating to have to keep going into the print section and ask repeatedly to print for a letter to get the
copies I need. 
Regards Kaz

Have the same problem with windows xp and Word 2007 and Excel.
I fixed the problem with disabling advanced printing feature on printing preference->Advanced->advanced printing features.
This was with a kyocera 3820 laserprinter. hopes it helps u

Similar Messages

  • Printer will only print from computer won't copy from printer

    My  printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected. 

    Hi @sandylouise,
    Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HO D110 series printer will only print half of page get error

    Ever since I got a new lap top that has Windows 8 my printer will only print half of the page and then stops. I get an error message. I have used the online Wizard and downloaded the new driver but it still won't work. Also can't print wirelessly still from other devices.

    Hello mrshayes,
    I saw that you have a new laptop with Windows 8 and now the printer is printing half a page and will not print any more. I understand you also cannot print from other devices. I have some suggestions for you.
    First, try to make a standalone copy from the printer itself. If the copy is successful, the printer tests out okay. If the copy fails, try resetting your printer and ensuring it is plugged in directly to the wall outlet, avoiding power bars, surge protectors, etc.
    Here is a link on how to reset the printer: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03177455
    If the copy works fine, see if there is a Firmware Update needed: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02919168
    Also, run the Print and Scan Dr. to detect any issues. This tool might fix the problem.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-126353-1
    Please let me know if you run into any troubles and I will do my best to help.
    Thanks!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

    I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

    Select a document, CMD+P, and set the color options as shown here:

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

  • Printer will only print 10 pages at a time

    Printer will only print 10 pages even if I ask it to print 33

    Hi, are you printing from a mobile device or a desktop/laptop PC? What printer model do you have?
    Best
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Printer will only print for maps

    Just bought a new printer. We are trying to connect and we get the following message. We get the message printer will only print from aps. We can print with the chord but not wireless. We have a envy laptop

    Hi,
    Please run setup on your computer (using the CD) and select convert from USB to wireless.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MY PRINTER WILL ONLY PRINT OFFLINE

    I have a 309a HP printer and it will only print offline.  I have an HP computer, windows 7, 64 bit.  Can you help me and thank you so much.
    This question was solved.
    View Solution.

    How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?  Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Recently, when I try to Print from a web page the printer will only print 1/2 a page.

    Recently when I try to print from a web page or e-mail, it will only print the left side of the page.  My printer is a Photosmart Plus B209a.

    This article should help resolve your partial pages:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
    Give the steps listed under your operating system a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • When I go to a website, it takes me to a different one. No matter how many times I open it, it takes me to random sites.

    If I open a page in a tab it will take me to a completely different site, and no matter how many times I try to close and open a new one, it keeps going to different sites. It also happens when I type the website into the address bar, it still takes me to a random site. Is it something with my computer, or is it Firefox, and if it is a problem with Firefox, how do I fix it?

    Sounds like Malware on your PC.
    Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]
    Also, the '''''More system details...''''' to the right of your posting shows that you have a few Plugins that need to be updated. See the Mozilla Plugin Check page. <br />
    http://www.mozilla.com/en-US/plugincheck/

  • Network printer will only print one time

    the printer ( HP Laserjet CM2320 MFP) (Driver PCL 6)is networked on a print server running server 2012, the computer operating system is Win 7 fully updated, other people can print to it without issue. 
    the user can print to it one time. after the first print, you can no longer right click and chose printer preferences or printer properties. Then she needs to log out of the computer and back in to print again. if i have tried to open the printer properties,
    they will open just before the computer logs out. this is the only printer she has. 
    things i have tried are removing and re installing the printer, uninstalling the all the print drivers on the computer, using the most updated drivers on the server and the computer. i also went into Printer Properties, ports tab, unchecked Enable bidirectional
    support on both server and PC. checked after each change. also under the advanced tab i unchecked the Enable advanced printing features. both server and PC. checked after each change. when i tried to un-install the print drivers on the PC, i needed to rename
    the reg keys because they were in use, remove the drivers and rename the reg keys back to the right name. i am sure i forgot some things i have tried, but if you need any other information let me know.
    Any help would be appreciated!

    Hi,
    Regarding current situation, I suggest we check the spooler service or clear the catch:
    How to Clear and Reset the Print Spooler Queue in Vista, Windows 7, and Windows 8
    http://www.sevenforums.com/tutorials/89483-print-spooler-queue-clear-reset.html
    After that, try to use following diagnostic tool:
    Diagnose and fix printer and printing problems automatically
    http://support.microsoft.com/mats/printing_problems/   
    If the issue still persists, please upload the printer log and application log here for our research:
    Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
    Kate Li
    TechNet Community Support

  • Printer will only print the first document then will do nothing.

    I am running a dell system with windows 7 pro 64 bit.
    I just got an HP LaserJet Pro 400 m401n printer.
    I downloaded the most current drivers for windows and updated the printer from the HP website.
    The printer will let me print the first document after the computer is restarted. Sometimes I can print a second document if I print it back to back with little to no time between printing the first document. If more than a few minutes passes and I try to
    print again the program im using to print enters a "not responding" state and goes into recovery mode. This happens with notepad, excel, word, or even printing directly from the internet.
    I can open the printer properties and see the document just sitting with "spooling" out beside it. I assumed it was a printer spooling problem and tried going to the Services.msc and checking the printer spooler. Ive started it and stopped it several
    times. Ive also gone into %WINDIR%\system32\spool\printers and deleted all files in this folder. This does not help. It still gets hung at spooling.
    Next I just went to printer property and turned the spooling off completely, by having it send the document directly to the printer. Again the exact same problem but instead of getting hung in "spooling" it now just hangs "printing".
    I have also gone to the printer properties on the ports tab to see if disabling the bidirectional support was enabled as per a google search result showing a potential solution. But im connecting the printer directly to the computer via a usb port so that
    option is not even available.
    The only thing that allows me to print again is doing a restart on my computer, then again I can only print the first document sent. Restarting the printer itself does nothing.

    Hi James,
    Did this printer work correctly before ?
    To verify whether it is related to the printer ,please plug it in another machine to have a check if it is possible.
    Considering it is a USB device ,plug in  with another port to have a check or try to update the USB controller driver or reinstall the USB controller driver to have a check.
    Please check whether the Event Viewer contains  errors or warnings related to this issue .
    I found a similar symptom in the HP forum ,the solution in it may be helpful:
    HP LaserJet Pro 400 M401dne print only one page (document)
    (720 Views)
    http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-LaserJet-Pro-400-M401dne-print-only-one-page-document/td-p/6456104#.VK5gLHkfrwo
    You may need to look for help from the HP forum at the same time .
    Best regards

  • 8750 printer will only print a small part of a photo what ever size paper I use and prferences

    Is there a solution to printing as when I try to print a photo either in 6x4 or even A4 it still only prints a small section of the photo in one corner of the paper and after all preferences checked it still remains the same.

    Hi there john2boy,
    With the jam and print missing ink lets try downloading and running the HP Hardware Diagnostic Utility located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=408...
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My printer will only print the first page of a doc from "Pages" in good quality.

    I've tried reloading drivers etc. Nothing works. My printer prints everything just fine EXCEPT for when I try to print a doc from the PAGES app. Then it only prints the first page (technically the last one prints first) and then all subsequnt pages are very poor quality.
    Lexmark tech support says the problem is not with their drivers.
    Any thoughts as to what the problem might be ??
    THANKS for any help !

    Then use the latest solution!
    Which doesn't need specifying either.
    Peter

Maybe you are looking for