Printing 2 photos borderless on single 4x6 sheet?

Ok, Ive been trying to get this to work without any luck. I'd like to print 2 pictures, borderless, on a single 4x6 sheet (cropped to fit as nicely as possible).
Can someone outline what permutation of options I need from the print menu? I've tried custom sizes of 3x4 (which should go side-by-side to fill the 6x4), and n-up printing from my ip5000 print menu - all without any joy.
Tips?
Jonathan

Just went through the same frustrations. I can't believe they've made what I think is a pretty common task so difficult.
Like you, I found that the default layout wasted so much space around the photos. I had chosen "borderless" and expected it the fill the space.
I ended up monkeying with the "custom" size until I found a setting that got as close to the edge as possible without it reverting to 1 photo per page. 2.75" x 3.75 was the best I found.
The software that came with both my Canon and HP does a much better job.

Similar Messages

  • Can't print photos from iPhoto on 4X6" paper from HP 5180 All in One

    Prior to Leopard using iPhoto, I had to select the 4x6 paper in the 5180 to get to that paper. Otherwise, it would print to the letter sized paper. Now it will only print with the large paper.

    My Mistake!  It is an 8610 All-in-One. (The 6000 series was our old one.) Sorry.

  • Printing photos with MG3520 4X6 borderless is impossible! How is it done?

    I recently purchased this printer and am having problems printing a 4X6 photo borderless and getting the full photo.  Am only getting about a 2X2 1/2" photo instead.  Keep checking my settings to see that I have 4X6 borderless designated in my preference, and I do - but continue to only receive a small photo centered on the paper.

    Hi dpol,
    What program you trying to print the 4x6 image from?
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

    Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

    jerryone1942 wrote:
    Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
    It depends upon the capabilities of your printer. If you have an HP printer with a photo tray then the Photo app will print to whatever size you load in to that tray.
    There's some more information here:
    Using AirPrint to Print Various Photo Sizes
    With other printers the user is given a choice from the printer's loaded paper sizes. You can see an example of that here:
    The Many Faces of the iOS Print Panel

  • HOW DO I PRINT MULTIPLE COPIES OF ONE PHOTO ON A SINGLE PAGE?

    Since Apple has not made this feature available, I am not able to print multiple copies of a single photo on one page. HELP suggested I download Portraits and Prints which I could use for free. However, I have downloaded this and note that DEMO watermark will appear on all photos unless I purchase the program. Is there a way to print without the DEMO watermark using this program or is there another free program that will allow me to print multiple copies of a single photo on a single page? Please help as I have spent 2 hours on the phone with Apple and it has gotten me no closer to a solution - something I could easily have done on the older versions of I Photo. Thanks!

    Sadly, I have no pull down menu when I click on Customize or settings? I am using IPhoto 08 vers. 7.0.1. I was told by Apple HELP that this feature is not yet available, even though the instructions say to do exactly what you have said. But there is no pull down menu and no option to print multiple photos. It says print a single photo and it is clicked and I cannot unclick it. Any help would be appreciated. Do you actually have a pull down menu with Print Multiple Copies of One Photo as an option? What version of IPhoto provides this? Apple seems to think it is not available and it certainly isn't available on my system. Any help will be appreciated. Thanks.

  • Can I print Photo contact sheets from my ipad? If so how?

               Can I print Photo contact sheets from my ipad? If so how?

    if you screen shot the contact you can........

  • Printing photos on HP 4500 using 8.1 photos 4X6 have a wide margin on right side..

    When I got a new computer that uses WIndows 8.1 I set it up to my  HP 4500.  Now when printing photos 4X6 I  get a wide margin on right side. When I send the photo out to print to Costco it comes out fine. Have tried to change all settings and nothing has worked. It prints fine with MAC and other Widows versions.  I have downloaded new driver and tried resetting margins.  Do you have a fix for this issue

    Hello @AngelJL,
    Welcome to the HP Support Forums!
    I understand that since installing your HP 4500 on your Windows 8.1 computer you have not been able to successfully print 4x6 photos. I would like to assist you today with resolving this issue. However, before I am able to provide accurate troubleshooting steps I do need to confirm a couple of things.
    1) What HP 4500 printer do you have?
    HP manufacturers several 4500 series products: Laserjet, Designjet, Officejet, Envy, etc. All products will require different troubleshooting steps to resolve printing issues.
    What's my Model Number?
    2) What program are you printing photos from?
    3) Have you tried printing photos from different programs on your Windows 8.1 computer to see if the margins issue is specific to one program or multiple programs?
    Once I have the answers to the questions above I will be more than happy to guide you towards a solution. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to print Photo Info in the Custom Print Package

    I am  using LR CC, latest version on a Windows7 PC.
    I am trying to print Photo Info in the Custom Print package. I have no trouble selecting Photo Info in the Single Image/Contact Sheet Layout Style, but when I switch to the Custom Print Package, the Photo Info check box in the Page panel, disappears. I can't find any reference to this in the manual as to why this would occur, or not be available.
    Appreciate any help with this matter.
    Best Regards
    Steve

    Hi,
    Have a look at: Lightroom Help | Print module layouts and templates
    Only on the Single Image and Contact Sheet layouts can you " ... print information about photos, such as the filename, title, caption, and keywords ..."

  • HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

    The printer will not grab the photo paper when I attempt to print a picture.  It works just fine when printing other things, such as text from WORD or something from the internet.  Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
    Any ideas?  Am I doing something incorrectly?  Thanks

    Hi hgr7,
    I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Trouble printing photos

    When I tried to print a borderless 4x6 photos on HP photo paper the image came out with too much red. I tried again with the same result. I then put in plain paper and the photo colors were fine. I was using a tri-color(97) and photo(99) cartridge.
    I have a HP Officejet 7210 All-in-One printer and am running Windows 7.  After the initial problem, I made sure that the latest drivers were installed. I printed a diagnostic page and it was OK on plain paper but was missing lines on the photo paper.
    I also found out that the photos are smaller than they are supposed to be. When I tried to print two 5 x 7 photos on the same
    page, I got two photos that covered a total area of 3 1/4 x 4 3/4.
    Do I need to uninstall everything related to the printer and then reinstall only the drivers? Or is there something else to try?

    Hi there,
    Instead of reinstalling lets try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printing photos with captions

    In a photo album I've put a caption into the Description box of each picture. I haven't been able to figure out how to print the photos with the caption beneath each picture. I can make a web page with the text in the Description box beneath each picture so surely there is a way to do it with printing. My goal is to print the sheets of a simple photo album -- two 4x6 pictures per sheet with the Description text below each picture. Can you help?

    If you want the captions beneath the photo then use the Contact Sheet theme in the Customize section of the print window. In the Settings page you can check the Comments box to have the comments printed under each photo.
    Click to view full size
    You'll have the option as to how many columns to have per page which determine how many photos will be per page.
    Click to view full size
    OT
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Printing photos from your Android device

    Have you tried printing photos from your Android device (Samsung, Nexus, HTC, Sony etc) ?  
    http://www.hp.com/united-states/campaigns/mobility/#android-tab-new
    Some people have reported issues with skewed borders when trying to print 4x6 & 5x7 photos (see example below of correct photo size v's photo with skewed borders)
    If you run into this issue I would advise you to download the free HP ePrint APP from the App Store or Google Play, this allows you to print perfect borderless photos, 
    Hope this helps.  
    I work for HP.
    Carrie 
    Although I am a HP employee, I am speaking for myself and not for HP.
    This question was solved.
    View Solution.

    Hi @Shania2015 
    That's it you should be all good to go now, you can also print from your Photos APP too.  
    Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    Thanks
    Carrie 
    Although I am a HP employee, I am speaking for myself and not for HP.

  • PSE8: printing off-center on a paper sheet?

    Hi,
    with photoshop elements 8, I can only seem to print a photo centered on the sheet of paper I use. For example, if I have a 10x15 photo, and I want to use a A4 sheet, I can't seem to be able to displace the photo so that, afterwards, I can print another photo below / aside.
    I understand that if I have 2 or more photos, the use of "Organizer" can be useful, however when I have only one photo I'd hate to waste the rest of my photopaper.
    In PSE7, it was extremely easy to move the photo all over the paper place, because there were the "locators" upper margin / left margin, or the "center photo" flag. In PSE8, all this seems to have disappeared and the help, be it on disk or online, is hateful and gives no useful information at all.
    Thanks in advance for any help,
    regards

    @Mark Sand:
    neither did I, but I had to upgrade due to the lack of support for the newest Operating Systems. In particular, PSE8 is the first to be certified for Win 7... If you run XP, keep PSE2 !!!
    @Saurabh:
    I think Barbara B has already given the answer to the matter: if you uncheck "print one photo per page", you enable the possibility for Organizer to arrange your photos in rational patterns when you choose a standard format, but this is definitely not what I was asking. Yeah, wonderful, I can print 3 copies of the same 10*15 photo on the same A4 sheet... but what if I want to print 1 single 9*19 photo on a vertical A4 by moving it topmost so that afterwards, maybe some days later, I can print another 10*15 photo on the remaining paper, simply by reinserting it into the printer tray?
    Does Adobe think that photographic photopaper costs nothing? or that his users are all millionaires?
    @Barbara B.:
    the workaround works like a charm, except the fact I need to keep two templates (A4 vertical and A4 horizontal) which are very very huge in size... However, nowadays computers can handle it with absolutely no problem. Thanks !!
    Regards

  • Printing photos without a boarder

    I am posting this on behalf of a Forum member who send me a private message:
    Printing Photos
    From: fishdan
    To: SiobhanF
    on 09-29-2010 01:58 AM
    I have a photosmart c-5180 all-in-one. when i try to print a 8x10, the photo comes out with a one half inch white boarder on the top and right hand side. i preset to no boarder and it still happens also sometimes on 4x6. i will take any help i can get. thanks
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    HI,
    It looks like you tried some of the settings in the driver. 
    Are you choosing 8 1/2 x 11 Borderless in the Paper settings besides choosing the check box on borderless printing?   I think you have to choose the paper type first... Like the Photo Paper, then the size with the borderless wording, then click the check box for borderless.
    This would be the same for your 4x6 photo's too.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • PRINTING PHOTOS WITHOUT BORDERS

    i am trying to print 4 x 6 inch photos using photo paper with the appropriate orientation and selecting the 4x6 inch option for size but i cannot seem to print without borders, how do i print photos on photo paper without borders

    Hi @DOCMCG, thanks for reaching out to the HP Forums! 
    Based on what I could find in the printer Specifications, Feel free to take a look using the link above, simply click on Paper Handling. You will see that the only mention of borderless is B5 paper (7.17x10.12).
    When I look under margins, I see the following; 
    The document margins must match (or exceed) these margin settings in the portrait orientation.
    Figure : Margins in portrait orientation
    Media
    1. Left (LM)
    2. Right (RM)
    3. Top (TM)
    4. Bottom (BM)*
    U.S. Letter
    U.S. Legal
    A4
    U.S. Statement
    8.5 x 13 inch
    Customized media
    Photo media
    U.S. Executive
    B5
    Cards
    Custom-sized media
    Photo media
    3.2 mm (0.12 inch)
    3.2 mm (0.12 inch)
    1.5 mm (0.06 inch)
    Windows: 14.5 mm (0.57 inch)
    Mac and Linux: 12 mm (0.47 inch)
    Envelopes
    4.0 mm (0.16 inch)
    4.0 mm (0.16 inch)
    16.5 mm (0.65 inch)
    16.5 mm (0.65 inch)
    Thus, I suspect borderless is not supported. I believe you can choose 4x6 tab and used tabbed paper., but I am not 100% certain. 
    I hope this is helpful.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Error details propagation among proxies

    Hi all, I've a question about how to propagate back error details from one proxy to another. I've setup a simple alsb project: - proxyA that calls proxyB - proxyB a local proxy with only one stage where there is a 'raise error' action with a custom e

  • Can't setup ePrint / Web Services on a new HP 8600 Pro Plus Wireless Printer

    I just purchased a new HP Officejet Pro 8600 Plus All in one printer. I setup the printer on my home wireless network and it prints great. I am now trying to setup ePrint and when I go through the option to setup the Web Services /ePrint function on

  • Syncing issues with iTunes

    I keep getting "disk not ejected properly" error message over and over when attempting to sync my iPod with iTunes. I'm using MacBook OSX 10.9.4 and an old iPod Nano. I've tried restarting computer, restoring Nano, downloading most recent version of

  • File T3 in Weblogic 6.0

    Hi, I am trying to use the File T3 service in weblogic 6.0 and have created a file system named 'myFileSystem' and assigned the path './config/mydomain/logs'. This file system is used by a class (works fine in weblogic 5.1). I am including the code s

  • R12.1.3 throwing errors in oafm application.log

    Anyone know how to stop this error from filling my logs. Not sure if it is actually causing some of my issues. Seems to be looking for DB Time. java.lang.NullPointerException       at oracle.apps.ecx.oxta.SystemProperties.getCurrentDBTime(SystemPrope