Printing a booklet on A3 paper

How do I set up a pages document to print a booklet using A3 paper?

Hi karismac,
In Pages, as in most applications, the paper size printed to is managed through the File > Page Setup menu. See this document for details -
OS X Mavericks: Page Setup dialog
http://support.apple.com/kb/PH14418
Note that if the size you want is not available in the dialog, you may add custom sizes.
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

Can the printer CM1312 MFP print in double face (same paper) with booklet format, like Canon 4850

Can the printer CM1312 MFP print in double face (same paper) with booklet format, like Canon PIXMA 4850

I can't help with your color proplem -- don't know the printer -- but you can use a script to impose your booklet in a new file, then export that to PDF.
The two I use are by Dave Saunders. The first, http://pdsassoc.com/downloads/Buildbooklet.zip merely shuffles the pages in a new file. You then export that as spreads. It's very fast and easy, but cannot handle objects that cross the spine.
The second is at Dave's CS3 Booklet Script and works by placing pages into a new spread-size document. This one does do cross-spine objects, but neither one handles creep. It's been awhile since I used either, but I think bleeds may be an issue for the second script, too.
There are also imposing plugins for Acrobat...

How can I print a booklet without a white outline around the border?

How can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.

You either need a borderless printer, or you have to print on oversize paper and trim off the bleed.

Printing a booklet

I am having a terrible time trying to print a booklet. The end result should be 8.5 x 11, printed on 11 x 17 paper.
If I try to print directly to our Canon ImageRunner, I get an error.
If I export to a PDF, it either prints out as an 11 x 17 page size or I get a booklet with the pages all out of order.
If I were printing from something like WORD, this would be a breeze.
How can I get help?

And don't attempt to use the Canon's booklet module from Print Booklet.
If the Canon has a finisher that can fold and staple, I think you'd do better to export the file to sequential pages as a PDF and print from Acrobat.

Creating a multipage PDF that prints 2 booklets side by side?

Hi I am a designer with NO pre-press experience and I need some help!
I am trying to print a booklet that is set at 8.5 x 7 as a 2 up document on 8.5 x14 paper. My problem is that I don't want the booklets to print consecutive pages (right now they would print 1,2 3,4 5,6 etc.) I want them to print side by side so that when the sheets are cut we would have 2 completed and collated books.
I know that I could just duplicate each page and print that, but I am wondering if there is a quicker way to make this happen? We have over 100 different multipage PDFs to print so I'm looking for a lean way to get this done.
Is this possible? Do I need to purchase pagination software?

When I need to do this I generally make a file set up as a single page (8.5 x 7, in this case) for easy design, then create a second, non-facing doc at two-up size (8.5 x 14) and place the pages from the first file int the second tow times so I have two copies per page. I use the Multi-page importer script for this: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files

Printing a booklet on 970Cse

I have a HP 970Cse and need to know if I can print a booklet (5.5 X 8.5) using letter size paper.

Hi karismac,
In Pages, as in most applications, the paper size printed to is managed through the File > Page Setup menu. See this document for details -
OS X Mavericks: Page Setup dialog
http://support.apple.com/kb/PH14418
Note that if the size you want is not available in the dialog, you may add custom sizes.
Thanks for using Apple Support Communities.
Best,
Brett L

RG1 printing format for A4 size paper with all records

RG1 register print not showing all details (Qty.) through J2i6 and no proper printing format for A4 size.
Is there any std. printing format for RG1 ?
Please give the std. ready format for RG1....
THANKS.

Your subject title mentions A4 sized paper, the body mentions US Letter size.
Assuming you want one half of a letter-size for each page, create the page size as portrait, 5.5" wide, 8.5" tall.
Thread in logical order, page 1 through...how many ever pages. You should have a page count evenly divisible by 4.
Export to PDF as normal...single pages.
Open the PDF in Acrobat or Reader, print the booklet from it.
Mike

Booklet Gutter Issue - When I print a booklet at 11x17, it causes a large white line down the center. But, when I try the same thing at 8.5x11 it prints side by side as it should. Help?

I have a 36 page booklet (each page is 8x5.5in). I have exported the booklet from InDesign as Pages. In Acrobat, when I select Print Booklet and 11x17 paper, it created a large white gutter down the center and the pages do not back up to each other.
I tried the same thing with 8.5x11 paper and they pages backed up to each other correctly with no white space down the center.
I tried again at 11x17 (size needed to print my booklet full size), and it's still causing the large white gutter. It's nearly half an inch or larger.
Help is VERY appreciated!

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

How to print 4 pics in a4 paper DJ2540

How to print four pictures in a paper hp DJ2540

Hello vpranav,
I see that you are attempting to print from Linux.
Please click on the following link for Imaging and Printing with Linux.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I am trying to print a booklet. I have printed it several times without issue. Now when I print, it gives me one blank page or else 2 out of my 8 pages?

I am trying to print a booklet. I have printed it several times with no issues. Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

How can I print a booklet where each pdf page is vertically placed on each half page instead of one pdf on each booklet page?

I've printed a booklet before but each pdf page had two powerpoint slides on each pdf file. This binder has one powerpoint slide on each pdf page and if I try to print it as a binder, each pdf page takes up the whole half-page on the booklet. I want to print two pdf slides on each page of the booklet so when I open the booklet, there are four powerpoint slides printed. So I basically want to combine the ability to print multiple slides per page but in a booklet form.

Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

How to print equipment documents in shop paper

Hi Gurus,
I`ve maintain DMS to some of the equipments and those were scheduled in maintenace plans.SO whenever work order gets created based on the schedule....documents should also automatically get printed along wih the shop paper.
This is my requirement because users dont want to spend time on printing the documents manually.
Any user exits ?
Help would greatly appreciated with rewards.
Regards,
Vijay

Vijay,
We did something similar but in user-exit IWO10009 (at save).
The reason for using this user-exit and not the BADI described above is because we required a popup box displaying the options for printing. The user could then choose which documents to print.
Pete
[www.pjas.com]

How to print A5 doc on A4 paper (to be folded)

I've set up a document with A5 pages, facing left and right, to be printed in landscape on A4. In the +Page Thumbnails+ display the first page is alone on the right, then the pages beneath are adjacent in pairs - this is correct and how I want the printed document to look when I print and then fold it. (So page one needs to be on the right hand side of the A4 sheet with a blank on the left.)
However, when I print or save as a PDF, the first page now moves over to the left and all subsequent pages shift up so the alignment for printing a booklet is lost.
Please can you suggest a solution?
Many thanks,
Mancunius

The re-pagination to create a booklet is not available "out-of-the-box" in Pages, but you can do it. There are a few ways to do this. The first two involve setting your Pages document in File > Page Setup… to landscape orientation. I originally wrote this for Pages 2. In Pages 3, use the page layout mode for #s 1a & 1b.
1a - Use linked text boxes. This is easier done with the layout showing. First you need to add a page break to have two pages. Click in the body area & then Insert > Page Break. Now click outside the layout area to enter object mode & click the "T" in the tool bar or Insert > Text to create a text box & type something in it. This is to keep the box from disappearing if you click elsewhere & the text can be replaced later. If you already have some text to paste in you can just paste while in object mode & a text box containing your text will be created. You will now need to click outside the layout again & drag the cursor toward the text box to select it. You can now position the first text box in the lower right of your 2-page document. It is easier to see where it goes if you have the document set up with 2 columns. Click on the blue-outlined tab at the lower right of the text box to create a new of the same size & move the box to the upper left. Repeat for a box for the upper right & again for the lower right. You will now have 4 linked text boxes.
1b - Start as in 1a creating a 2-page document with 2 columns in landscape orientation. For this one you will use the body text area. Just type or paste your text in as normal, starting in the upper left. When you have your text done, cut all of the text in the first column (upper left), insert a column break after the last character on the now lower left column & paste the cut text after it in the now lower right column.
Neither one of these will let you automatically use page numbers because Pages "sees" each page & you actually have 2 pages per page. Page numbers would have to be created manually using text boxes or manually entering the number at the bottom of each page.
2 - Use Cocoa Booklet to create a booklet with any number of pages (best in a multiple of 4). This is my preferred method.
I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

How to print photobook pages into A4 paper

how do we print the photobook pages we made from Aperture after saving as PDF format. The PDF file when open in Adobe PDF is showing each single page only and it does not show 2 pages spread out like we saw in the Aperture photobook layout. do i need to use another program to do the layout beofre printing out in an A4 paper? I intent to do a layflat photobook which require the sticking of the pages for binding later. someone pleeas help. thank you.

I have give a several try to your new instruction but the gap is there no matter how i set the paper size. I gave an example of this page layout of 2.5in x 2.5 in . If i read your article correctly , my total page size is suppose to be 5inx5in.
Just look at the image and i had try out 2 custom setting in the paper size . You will notice the difference of these two layout after i open the preview for PDF.
the first one, the paper size remain as original as it is (2.5inx2.5in per page) .The image is pretty close side by side but the gap can still noticeable.
The second image is using your instructions earlier (When you export your book define a custom paper size that is exactly the size of two pages of your open book. That you define in the "Manage Custom Sizes"-entry of the "Paper Size" selector of the Print panel) - the result = it shrank to smaller size and left a huge gap in between those image. The paper size was set as 5inx5in per page.
Thanks again but still not resolve.

How to print red color in plain paper?

When printed on glossy papers, red color (in photo or text) looks great.
When I print on non-photo, plain papers, red color came out brownish.
I tried on premium ink jet papers, it does not print red but in brown color.
How can I print red color in plain paper?

When dealing with printing ink, R=100m+100y+0c+0k. What drives the color toward rust, maroon, and brown is the addition of c to the mix. That may be the result of the diffuse reflection of the uncoated paper surface, its absorb rate, the ink chemistry and – the light source. Since the easiest variable to test is the light source, look at that color using a source weak in blue emission, incandescent light, and watch the red shift. Remember also that the reflected color will never be as bright as paper it is printed on. Each ink film is a filter subtracting light from the paper reflection.
Shown above (with a mode change to RGB for the purpose of this display) is its version of 100 each of m+ y and a patch with the unwanted c

Printing a booklet on A3 paper

Similar Messages

Maybe you are looking for