Printing a large poster in pages

I would like to take a pages doc and print to poster size utilizing 8.5" x 11" paper, that I could tape together to post on an easel. Is it possible?

Thank you, thank you for the help from Monique, an Apple Education contact, for the answer to this problem.
To print a large poster.
1. Save your Pages file as a PDF.
2. Open file in a program that will open PDF files and let you convert them to JPEG. I used GIMP.
3. Use the program PoseRazor. This will let you drop the JPEG file in, and allows you to print the poster in sections, and then paste together.
Hope this helps.
Message was edited by: techteacherPA
Make that PosteRazor!

Similar Messages

Printing a large poster

How do I set Pages to print a large poster over several sheets of 8.5"X11"paper to form a composite that can be taped together? Thank you

You can't in Pages. What you can do is creating a larger paper size, the size you want for the poster, in the File > Page Setup > Paper size > Manage Custom Sizes
Create your poster and save it. Then Print to PDF.
Get the application (free) Tiler or Paster Razor which can split the PDF when printing on you home printer.

Tile Printing / Tiling Large Poster

I did not see this as a feature in the print module lr2 where you can tile a large image to print in smaller pieces then cut and tape together a large poster.

You can't in Pages. What you can do is creating a larger paper size, the size you want for the poster, in the File > Page Setup > Paper size > Manage Custom Sizes
Create your poster and save it. Then Print to PDF.
Get the application (free) Tiler or Paster Razor which can split the PDF when printing on you home printer.

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

Any way to print a large page through tile printing?

I have a PDF with dimensions larger than 8.5x11. When I try to print it will only print the center of the page. Is there any way to get it to print on multiple pages (tile printing)?
Thanks,
Jonathan

Ok, I did some digging on my own and here is what I found:
first is an app you have to pay for: *+Poster Print+*
http://www.luxordevelopment.ch/posterprint/
it cost about $20 and allows you to organize images and PDFs for tile printing. If you want to do a lot of tile printing it would be wroth the price, I guess.
second is a free option: PosteRazor
http://posterazor.com/
It is free. It does not import PDFs (so you will have to save them as images), but what's nice is that it will save your tiled image as a multipage PDF for easy printing.
If anyone has anything better I'd love to hear it.

How do you change the page format to print a larger area?

Hi there, another new to mac and new to numbers guy.
I'm trying to find the windows equivalent to change page format.
I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you from printing up to the paper edge?
cheers

Page margns in Numbers are set in the Layout Inspector.
Open the Inspector and click the Layout button.
Edit the four margin settings as you wish. Reduce the (page) header and footer settings to zero if you don't want to include running headers or footers on your pages.
Note that margins will be limited by the capabilities/settings of your printer. Printing to the edges of the paper usually requires a choice to be made in the Print dialogue as well as for the document itself.
Regards,
Barry

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

Print a large image from browser on one page

How can I print a large image that is generated by one of my servlets in a response page on one single paper page, (e.g A4 format). When I choose to use Print from Internet Explorer or Netscape the image is printed on 3 pages. Any stretch that I tried with Javascript does'n work. I dont want to use a plug-in. Can this be done with an applet or other way?
Thanx for any answer
Dan

So you are asking "How can I take an image in my browser and shrink it to fit on a single page?" This has nothing to do with JSPs, of course, because once the image is in your browser the JSP or servlet is long gone. What I usually do is to save the image to a file, then I use the (Kodak) Imaging for Windows accessory to load that file and print using the "Fit to Page" option.

Since installing update on 6/25, printing pdf pages OK, but bank account activity type is too large for the page. How do I shrink the type?

Since installing Firefox v.3.6. 6 update on 6/25, printing bank statements in pdf format is still OK, but when I select the print option for my bank account activity the type is too large for the page. How do I shrink the type? We are running Windows XP.
== This happened ==
Every time Firefox opened
== I installed Firefox update on 6/25

Firefox doesn't display PDF files all by itself, it uses your PDF reader program which is also what handles the printing of that file type.
As far as the large printed font from Firefox, open File > Page Setup and see what the '''Scale''' is set to. 100% is usually the best setting, but you might need to use a smaller setting.

Exporting An iPhoto To Make A LARGE Poster Print

After a bit of work on my photo in Iphoto, I want to get it printed as a poster 30 inches wide by 20 inches tall.
I have read through heaps of FAQs about pix and DPI ... being an old newspaper & magazine man I am fully conversant with Dots Per Inch, but that has little relevance today.
What is the 'best / most efficient' way to export the photo so I can take it to a professional print shop and achieve a pin-sharp poster that looks like it's been taken by an expert?
Specific settings ( Jpeg / TIF ) (Custom ????? px ) would be appreciated.

The easiest method would just to use the Apple online photo service. No exporting required... just select the pict, choose the 20x30 size, and the picture is uploaded.
As for best quality, as already stated, if your original image is a JPG, then all you can do is send the highest rez of that jpg. If you will be doing more posters in the future, you can set your camera to take those picts in raw and then import that raw into iPhoto.
An important point here is that a poster will not be viewed (by the human eye) at close range like a photo, so the dpi can be lower than a normal photo, and it will look just fine from 5ft away.
Again, the painless way to handle this is just to send the highest rez image you have to Apple/Kodak via the built in service in iPhoto. Your poster arrives at your door in a week.

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

Print too large Deskjet 3510

Lately whenever I print anything it is printing too large - margins are off page. I have done the align printer and cannot find anything in settings of the printer to set this to where it prints the correct size - it is not set to landscape and is set to portrait so I do not understand why it is printing like landscape. Does anyone know how to fix this problem.

Welcome to the HP Community Forum. Most of the time, the size of the font -- the margins, the scale -- and the "whole general page" that you are printing is handled in the application you are using at the time you are setting up the print job. In most browsers (Firefox, Chrome, Internet Explorer), document editors (Word, Libre), and PDF Readers (Adobe Reader and Foxit), this "setup" is handled a program or subroutine called Print Preview. You (that is, the print job) can get into trouble when the Page Scale does not match the paper -- perhaps the margins are not (and should be) set "Fit to Page". The font sizes can be too tiny -- or too large -- for similar reasons, although it can become somewhat more complicated than that. It is also true that some documents and Web Pages are better printed in Landscape mode than in Portrait -- and it is not always clear by glancing at the Page which is best. You might take a look at the following and see if the explanations and examples can help you sort what is going on in your situation: Manage Print Output with Print Preview When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

Print group name on a page of Report

I have sorted my data on my report, printing a group on each page of my report.
On each page, i would like to print the name of the current group (easy) but also the name of the previous page group. How can i do that ?
Using GroupName()...?

duplicate - please do not post multiple times

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash.

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Printing a large poster in pages

Similar Messages

Maybe you are looking for