Printing books to PDF

I make InDesign CS3 books because it is more convenient and faster to create PDF files from a book than from indidivual documents.
Is it possible in the Export Adobe PDF dialog, under Marks and Bleeds, to add Page Information to each individual document in a book when exporting to PDF from a Book?

Since you are using CS3, you can define a text variable in each document (or do it in the master document, and then synchronize including text variables) which is of the "File Name" type. Then place a text frame containing that variable on the master page(s). I would suggest doing this in a slug area you define, and then making sure to turn on the "Include Slug Area" checkbox in the PDF Export dialog box.

Similar Messages

  • Print book to PDF with 8 by 11 and 11 by 17 pages in same book?

    Hello,
    I am using FrameMaker 8 (Structured Mode) and am trying to generate
    a PDF with both 8 1/2 by 11 and 11 by 17 pages in the same book.
    The 8 1/2 by 11 inch pages work good, but the 11 by 17 inch pages are generating as 11 by 8 1/2 (landscape view).
    Is there an easy way to get my foldout drawings to come into my book (with the correct dimensions, when there are also 8 1/2 by 11 inch pages in the same book?
    Thanks in advance.
    Jim

    James,
    When you generate the book, you must select the largest sheet size
    used in the book, i.e. 11x17. FM then outputs the all of the pages
    centred on this sheet and if using SaveAsPDF (or enabling Generate
    Acrobat Data when printing), will automatically crop the pages to the
    appropriate size(s).

  • Aperture printed book in pdf (mail) won't load in iPad2

    Any one has an idea how to convert a book printed from Aperture to a pdf (mail) format so it will load in iPad
    The file resulting from my book of 100 pages was 541MB an it can be seen with Adobe Reader but when loaded to iPad goinf through  the recommended method of dropping it in iTuene and sync it with the iPad.
    Just loads the cover and 100 blank pages. If I open it it freezes the iPas and crash the app.
    Is there an application that can make smaller files from exiisting odf files?

    Edlatour-
    I just realized there was a step left out.  When you get to the Print window, first check "Selected Images in Sidebar" under Pages. Otherwise I think you just get another copy like the original.
    The revised process:
    Open the PDF in Preview.  Under View, be sure Thumbnails is checked, so you can see all pages next to the one you are reading.  Click on the first page thumbnail.  Under Edit, Select All.  Under File, select Print.  In the Print window, check "Selected Images in Sidebar" under Pages.  Then select PDF-Save as PDF, and give it a new name.
    This is a handy way to make a PDF out of several individual files.  Open one in Preview and check View-Thumbnails.  Then one-by-one, drag each file into the Thumbnail sidebar.  Drag them into the order you want.  Under Edit, Select All, et cetera.  It is possible to mix file types as long as each is compatible with Preview.
    Fred

  • How to save book in pdf tiff 300 dpi? with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    how to save book in pdf tiff 300 dpi?
    with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

  • InDesign won't print all files in "Book" to PDF

    I have 69 .indd files created in CS5 (ver7) that are part of a "book". I have been trying to "print" this book to PDF so I can submit a single PDF to the commercial printer. I do this all the time and have never had problems like this, but this is a new publication.
    Here is what happens: I select all the files defined in the book, then click on the "Print the book" icon. After InDesign gathers all the document information, I select my Print Preset, with "Adobe PDF" as the printer, then print. After processing a few moments, I save the file, and InDesign/Acrobat starts processing the PDF. The complete book is 542 pages, but the PDF file pops up as completed with only about 38 pages processed; in the meantime, InDesign/Acrobat is still processing the files, but results in no new PDF file created.
    I have rebooted and the problem has persisted.
    In addition to this, another problem has cropped up and I wonder if it is somehow related. Parts of a master page (page heading) mysteriously appear on a page defined by another master page. There is no way to delete this unwanted heading, even if I "Override All Master Page Items".
    Any help is appreciated.

    I would recommend exporting the book to PDF rather than printing to PDF....
    Master objects from a different master might be appearing if they are on the other half of a master spread that is applied to the other half of the document spread and they touch that side of the master as well as being on the half not in use. Check the master in questina and be sure that the objec is not crossing the gutter.

  • Microsoft Office Documents Not Printing in Complete PDF Books

    Good afternoon all -
    Our users load Word documents and Excel documents into Workspace, then add them to reporting books. When they run these books in Complete Book in PDF view, the Office documents do not show up. They show up in every other view.
    Oracle Support suggested the following options:
    1) run the PrintServer from a command window --- this worked, but isn't viable long term
    2) change the 'Log On' properties for the PrintServer service to 'This account' and specify a regular admin type account/password. --- I have not gotten this to work yet. I have it running under a user in the local admin group for that server. I see the EXCEL.exe and WINWORD.exe services pop up in the task manager window, but nothing further than that.
    I'm wondering if anyone has advice or has run into this problem before. My server admins aren't offering much in the way of help here.
    Appreciated in advance,
    Sarah

    I spoke with Oracle Support and they say the patch will not fix this particular issue. I'll keep that in mind though in case we run out of other options to try.
    I found the following in the FRPrintLogging.log:
    [2011-12-20T16:47:59.980-06:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Oracle Workspace
    [2011-12-20T16:48:00.039-06:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Copyright&#169 2000, 2011 Oracle and / or its affiliates.
    [2011-12-20T16:48:00.039-06:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] All Rights Reserved.
    [2011-12-20T16:48:00.260-06:00] [EPMFR] [NOTIFICATION] [00194] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintServer] [SRC_METHOD: initialize] [arg: E:\Oracle\FINANC~1/products/FinancialReporting/PDFOutput/] PDF root directory is E:\Oracle\FINANC~1/products/FinancialReporting/PDFOutput/
    [2011-12-20T16:48:00.290-06:00] [EPMFR] [NOTIFICATION] [00282] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: startAndBindToRMIRegistry] [arg: 8297] RMI (Remote Method Invocation) registry created on port: 8297
    [2011-12-20T16:48:00.290-06:00] [EPMFR] [NOTIFICATION] [00284] [oracle.EPMFR.core] [tid: main] [ecid: 0000JHTeF4O8DwH6yvrY6G1EwH2W000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: startAndBindToRMIRegistry] Financial Reporting Print Server started
    [2011-12-20T16:48:18.616-06:00] [EPMFR] [NOTIFICATION] [00162] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: run] [arg: Thread[Thread-13,5,main]] [arg: com.hyperion.reporting.printserver.TaskInfo@1b33a0e] Start of run for Thread[Thread-13,5,main] job com.hyperion.reporting.printserver.TaskInfo@1b33a0e
    [2011-12-20T16:48:19.701-06:00] [EPMFR] [ERROR] [00180] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: writeExternalFile] [arg: E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Book test.docx] [arg:  -5: The system denied access to the specified file.] [arg: ] Cannot retrieve the document file: {0} The returned error code is: -5: The system denied access to the specified file., Last error:
    [2011-12-20T16:48:19.701-06:00] [EPMFR] [ERROR] [00176] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: processChapterPageInfo] [arg: Book test.docx] [arg:  0: The system is out of resources.] [arg: ] Cannot print document file: {0} \n\tError code: 0: The system is out of resources., Last Error:
    [2011-12-20T16:48:19.946-06:00] [EPMFR] [ERROR] [00180] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: writeExternalFile] [arg: E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Screenshot.docx] [arg:  -5: The system denied access to the specified file.] [arg: ] Cannot retrieve the document file: {0} The returned error code is: -5: The system denied access to the specified file., Last error:
    [2011-12-20T16:48:19.946-06:00] [EPMFR] [ERROR] [00176] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: processChapterPageInfo] [arg: Screenshot.docx] [arg:  0: The system is out of resources.] [arg: ] Cannot print document file: {0} \n\tError code: 0: The system is out of resources., Last Error:
    [2011-12-20T16:48:20.618-06:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000657     PrintInstanceThread      getInstancePageNumber     
    [2011-12-20T16:48:20.924-06:00] [EPMFR] [ERROR] [00180] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: writeExternalFile] [arg: E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Test for book.xls] [arg:  -1: Unknown or unexpected error occured.] [arg: Error #1004: Microsoft Office Excel cannot access the file 'E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Test for book.xls'. There are several possible reasons:\n\n• The file name or path does not exist.\n• The file is being used by another program.\n• The workbook you are trying to save has the same name as a currently open workbook.] Cannot retrieve the document file: {0} The returned error code is: -1: Unknown or unexpected error occured., Last error: Error #1004: Microsoft Office Excel cannot access the file 'E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Test for book.xls'. There are several possible reasons:[[
    • The file name or path does not exist.
    • The file is being used by another program.
    • The workbook you are trying to save has the same name as a currently open workbook.
    [2011-12-20T16:48:20.924-06:00] [EPMFR] [ERROR] [00176] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: processChapterPageInfo] [arg: Test for book.xls] [arg:  0: The system is out of resources.] [arg: Error #1004: Microsoft Office Excel cannot access the file 'E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Test for book.xls'. There are several possible reasons:\n\n• The file name or path does not exist.\n• The file is being used by another program.\n• The workbook you are trying to save has the same name as a currently open workbook.] Cannot print document file: {0} \n\tError code: 0: The system is out of resources., Last Error: Error #1004: Microsoft Office Excel cannot access the file 'E:\Oracle\FINANC~1\products\FinancialReporting\PDFOutput\HRPrinter1\Test for book.xls'. There are several possible reasons:[[
    • The file name or path does not exist.
    • The file is being used by another program.
    • The workbook you are trying to save has the same name as a currently open workbook.
    [2011-12-20T16:48:22.055-06:00] [EPMFR] [NOTIFICATION] [00163] [oracle.EPMFR.core] [tid: Thread-13] [ecid: 0000JHTeJas8DwH6yvrY6G1EwH2W000002,0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: run] [arg: Thread[Thread-13,5,main]] End of run for Thread[Thread-13,5,main] end
    Has anyone dealt with anything like this before?
    Thanks,
    Sarah

  • Export book to PDF doesn't remember previous settings - CS5

    I've just noted a somewhat annoying "bug" in the book export.  When I export book to PDF--which I do a lot--I have to rename the file and reselect the type of PDF I'm exporting every time. It should remember the last settings I used.I believe in the past that it did.
    I also really hate that it always defaults to the interactive PDF--which I will probably never use. Half the time I forget to check that setting, rename the file, click OK, and then have to cancel and go through all the steps again because I forgot that the stupid thing can't remember that I want a Print PDF.  I have gone through this annoying misbehavior several times in just the last few minutes. Add that up over all the hours that I work on books and do that export and we're talking about a huge time waster. Am I missing a way to set a defaullt here?

    The book export or the regular export?  Mine definitely always goes back to interactive PDF.  Even after I've saved a print PDF several times.  It's really annoying.

  • Is it possible to allow printing of a PDF document without a password but still restrict editing?

    We are putting a sample chapter of our book as a PDF on our webpage... the book is a workbook with exercises, so there are places for people to fill in a circle, write things, etc. (Which cannot be done the same way using the form feature and that is not my intent; the full workbook will be print-only.) I can imagine someone might want to print out the sample chapter to complete it... and then eventually buy our printed book. Ideally I would like to enable printing but DISABLE any editing of the PDF, just to protect our material. This PDF would be only for potential customers; I would make any changes to the original document in InDesign. The only options I see in Acrobat are to restrict printing AND editing with a password... you can't separate the two. Is there a way around this? (I have the latest Acrobat with Creative Cloud.) Thank you!

    In the security permissions there are 2 different entries for "Printing Allowd" and "Changes Allowed".

  • "Text on a path" and "paths" rasterised when printed from a PDF on an iGen

    I have just obtained from the printer the first proof of my book (printed on an iGen) and I'd like to find out where one of the problems lie. I'll ask the printer his opinion before second proof, but I don't like to annoy him unnecessarily.
    One of the chapters in the book has a lot of maps. I drew rivers by stroking a path, and named the rivers using 'Text on a Path' so that the text follows the curve of the river. Some of the maps have a pale background image on a different layer. And this is where the problem seems to lie.
    1. Rivers (and their names) appear normal on a map WITHOUT a background. By 'normal' I mean they look sharp. When magnified they seem to have been drawn as vectors.
    2. On maps WITH a background layer, 'Text on a path' appears very chunky (as if it has been rasterised at about 300 dpi) and paths (the rivers) appear to have the jaggies. Horizontal text does not appear to be affected.
    I can't be certain that (1) and (2) exactly define the problem, but it's as close as I can get at the moment.
    When I opened the original PDF file from which the book was printed, no matter how much I enlarge it, all paths and 'type on a path' retain their smoothness. i.e they are obviously vectors. However, I noticed when I opened the PDF in Acrobat 7 and tried to edit the 'text on a path', the PDF went haywire: the text I tried to edit disappeared, and other text frames on the page were shifted around.
    A sample PDF (6.7 MB, including an original two-page spread, and a scanned copy of the iGen print of the same), can be downloaded from:
    http://www.mediafire.com/download.php?oe4omuzoqzz
    Two questions:
    Q1: On the maps with a background image, is the rasterising of stroked paths, and 'text on a path' due to the iGen mishandling the file? Or might there be another explanation?
    Q2: Re Acrobat 7 mishandling my 'text on a path': is this a bug that has been fixed in later versions of Acrobat?
    To reproduce this bug do this: Open the PDF described above, and within Acrobat 7 select Tools > Advanced Editing > Touchup Text Tool. Then click inside the name "Georgina River", backspace to try and delete a letter, and the PDF should go haywire.

    Sandee: Almost certainly below the text, but I'd have to check them all.
    But before I do that, we'll have to go back a step. I can almost handle layers in InDesign, but didn't know they existed in PDFs. The printer printed from the PDF and as far as I can tell after a brief visit to HELP, there aren't any layers in the PDF. When I go to View > Navigation Tabs > Layers and click on the Layer Tab when it appears, there's nothing there; and all the items under Options are grayed.
    Q1: Why do I need a layer in a PDF? By not having layers, can that cause problems?
    Q2: Re Robert's suggestions: what do you mean by "move all the text to a top layer"? Within InDesign before I export to PDF?
    Q3: Is printing more foolproof when I export to PDF, if all my text is on the one layer in InDesign and that layer is above any images? There are several hundred river names, place names etc, sitting on lower layers, but if need be I'll move them all.

  • Exporting a book to pdf - any way to reduce the file size?

    Hi,
    So I have made a book using iPhoto and would like to send a pdf copy of it to another person who will fill in the texts. I am able to save the book as pdf via the print menu but the resulting file is over 300 mb in size (the book has only 20 pages)! On the one hand i like the fact that iPhoto is not downsampling my photos but it's a bit difficult trying to send a 300+ mb file over email Is there any way to create a pdf with the images compressed so i could send it as an attachment?

    http://beyondteck.blogspot.com/2008/11/how-to-reduce-pdf-file-sizes-on-mac.html
    Google is your friend.
    Regards
    TD

  • I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

    I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.  When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks?  Thanks....

    Hi jybravo70, 
    Welcome to the Apple Support Communities!
    It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
    The following information is located in the print at the bottom of the article. 
    Apple - iCloud - Family Sharing
    Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
    Have a great day, 
    Joe

  • Save as PDF or Save Book As (pdf format) Causes Frame 8 to try to quit after creating PDF

    I have Framemaker 8p273 and Acrobat distiller 8.1.3.
    When trying to creating PDFs from books using either Save as PDF OR Save Books As (PDF) file, the PDF creates FINE but the program then attempts to quit by throwing up weird dialog boxes.
    Steps to reproduce bug:
    1.Open any book
    2.Use File-->Save as PDF or File-->Save Books As and then choose type PDF
    3.PDF created fine - no errors reported in Distiller window
    4. Framemaker then throws up a small dialog box that says "cannot quit." You cannot close this box, only click OKAY.
    The only other issue that arises might be a "cannot print some graphics - will print as gray boxes"
    5. Clicking okay brings up sequence of 5 total of the same boxes (the book file has 7 files in it including the TOC).
    6. After last of 5 "cannot quit" boxes, a new Framemaker one appears, that says "Unsaved Changes in file (book name) Save before closing?" Options are Yes, No and Cancel. Yes saves file and quite Frame. No quits Frame. Cancel leaves file open.
    I have reproduced this error multiple times with different books, using both the Save as PDF and Save Book As (PDF) commands.
    File--Print Book using Acrobat printer works fine (making sure to enable the acrobat setting so bookmarks are properly generated).
    Just frustrated that the first two options cause such an annoying error. Reported as a bug.

    Jaclyn,
    I've seen this happen when an API client attempts to close a document that doesn't exist, which defaults to closing the FrameMaker session, but the session cannot close because it's in the middle of some operation. It's normally the result of sloppy code. Do you have any third-party API plugin software running? For that matter, does anyone know if the "Save as PDF" uses an API client? If so, might be a bug in that software, although it seems that there must be something unique going on here to invoke this behavior in your case.
    Russ

  • Save FrameMaker Book as PDF - Files with different page sizes

    I've created a book with 2 files - the pages in the first file are 8.5 x 11, the pages in the second file are 8.5 x 14.
    How can I save the book as a PDF but keep both page sizes? Right now if I change the page size in the PDF settings dialog, it changes all pages.
    Thanks.

    Something's not right. Try this route then:
    1. Use the Print Book option and have the AdobePDF printer instance selected, turn off the the Print to File, enable the "Generate Acrobat Data" option.
    2. Click the PDF Setup button to ensure that the Page size is set to the largest (as in the previous message),
    3. Then click the Setup... button to configure the printer for the largest size required.
    4. Then click the OK button to get back to the Print Book and finally click Print.
    5. You should be prompted where to place the file (unless you left the default configuration which may place it on your desktop).
    This should have all the pages correctly cropped as in the following sample with Letter, Legal and Tabloid all in one book:

  • After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

    After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.)  Has anyone encountered this issue, and can you suggest a workaround? Thank you!

    Known bug - already fixed - get the latest FM11 patch

  • Export Book to PDF shows bad colours

    Hi all,
    I have created a book in Aperture, starting from a set of RAW/TIFF pictures.
    If I preview/export the book in PDF, it looks VERY BAD in the dark areas (posterized to very few RGB tones).
    The problem appears ONLY when I use the "Save as PDF" option from the "Print Book" menu, or I make a preview before placing the order.
    What I tested so far:
    - If I export from Aperture each single image to PDF (or tiff/jpg), the problem does not occur!
    - The images look perfect also if I open them from other apps, like photoshop/iPhoto/preview.
    - I created a test book with the images from iPhoto and there the exported PDF book looks fine.
    - I installed Aperture on a different computer (a mac mini recently reinstalled), and the problem is still there.
    Please consider that:
    1. my monitor (iMac 24") is hardware calibrated
    2. the source pictures are in RAW (no color profile on them) and (just a couple) in TIFF (16bit, Adobe RGB). I also tried reimporting in the album jpg converted versions, with no better results.
    3. OS and Aperture are updated to the latest versions.
    I would exclude a problem of the source images (because Aperture/iPhoto can export them properly to PDF)
    It looks to me like a problem of the PDF rendering engine when used for exporting Aperture books.
    Anyone had ever experienced something similar?
    Any advice?
    If you want to check with your eyes, I uploaded a few screenshots here:
    http://www.dropbox.com/gallery/5695776/1/Test?h=0a0f16
    Thanks in advance!
    Marco
    ps. I've posted this message also on the other Aperture's discussion group, please apologize for the repetition.

    It seems the same my problem:
    look here: https://discussions.apple.com/thread/4760913

Maybe you are looking for

  • Adobe Photoshop Lightroom CC never start in Windows 10 Tech Preiew

    I installed yesteday Adobe Photoshop Lightroom CC from my Creative Cloud. Currently my main machine is runnng Windows 1o Tech Preview Build 10061. The product do not start literaly. How I can fixed this? The version 5.6 work fine, but i unistalled Re

  • Lines round images problem

    Hi there, New to Fireworks and just getting to grips with it. I have what is probably a simple problem however it is still driving me crazy. I am rounding the edges of images using the rounded rectangle tool and cutting and pasting to get the result.

  • Cannot see users with server 10.7.3 update

    I updated to 10.7.3 and when I launch the server app I see only the administrator user in the users pane (all other users do not show up). Further, the knobs for + and - are grayed (disabled). I still can log in with any network user, though. How can

  • Will Upgrade Assistant work with MS SQL Server

    We have ODI installed om MS SQL Server 2005. Current version of ODI is 10.1.3.5 and would like to upgrade to 11.1.1. My question is can we use upgrade assistant to create 2 instances of ODI that has old 10g Repository DB and 11g Repository DB or is U

  • "Save for Web" does not work with mac OS 10.6

    Everything else runs fine with PSE 6 and OS 10.6, but nothing (!) happens when choosing "Save for Web" (German Version).