Printing "Continue.." when report exceeds more than one page

Hi,
I have an invoice report which can prining in 2 or 3 pages too. in that case I want to print "Continue.." at the bottom of the report in the first & second page when the report output contains total of 3 pages.
Please guide me.
Regards
Ashok G

The requirement is to print the invoice details (lines) in the report. if there are 30 lines, first page will have 15 lines and second page has 15 lines. Since this report is of two pages, in the first page, we have to print "Continue..." in the First page bottom-right side (but not in footer) .
Thanks in Advance.

Similar Messages

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Why can't I print more than one page?

I'm pring a lafge text:
<af:inputText id="it1" value="#{main_bean.resp}" readOnly="true"
simple="true" rows="#{main_bean.kvitRows}" styleClass="AFStretchWidth"
visible="true"/>
That is I use one af:inputText with many rows.
To send it for pring I use JavaScript.
<af:resource type="javascript" >
function printPage(evt){
window.print();
evt.cancel();
window.close();
</af:resource>
When printing it clips the text. If the text is more than one page it print only one page. I need to continue printing on the next pages (not to clip). When printing othe web-pages it distributes it onto several paper pages.

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How to use more than one page to design a form-like report???

Hi
I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
Now there is no space at the window to complete designing the report!
How to make the repeating frame to contain more than one page or one window to complete designing the report?

change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

Reporting from more than one infocube and also from multiple ODS

Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
Sekhar

Hi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

When I read a pdf document using Safari I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

Hi snoreaustralia,
It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
Best,
Sara

When I open more than one tab with ikls.ru web site - safari freeze immediately.

I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.

In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

Pen pressure sensitivity stops when I have more than one window open

I recently upgraded to Flash CC and have noticed some new bugs. Here's one of them:
When I have more than one document open at a time, my pen pressure sensitivity stops working. In fact, it seems to work on the newest opened document, but will stop working on any previosuly opened documents. If all but one document is closed, the pen pressure returns.
I'm using Windows 8, and a Cintiq 21UX.
Steps to reproduce:
- Launch Flash.
- Open a new document.
- Select the "Brush" tool.
- Toggle "Use pressure" in the tool bar.
- Draw something to make sure the pen pressure is working.
- Open a new document.
- Draw something to make sure the pen pressure is working.
- Return to the previous document and attempt to draw.
- Notice how the pen pressure is absent.
Any help or suggestions would be great. Thank you.

No problem. I've been using older versions of Flash until CC gets the bugs squashed. This pressure issue is a deal breaker for my coworkers and me, and also this audio one: http://forums.adobe.com/message/6013488?tstart=0

When I have more than one tab open, if I click on a picture to view, when the window opens to view the photo, firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason.

When I have more than one tab open, if I click on a picture to view/enlarge, say eBay, and I click on the items photo to enlarge it, when the window opens to view the photo, Firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason, The green circle starts going round and round for no reason even though the tab is not being viewed. Both problems seem to have started after the last software update.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes

One position reporting to more than one position in other org unit

Hi Experts,
How to map in SAP if One position is reporting to more than one position in other org unit. plz explain me the in detail.
Regards,
Saumya Chawan.

Hi Saumya,
First you have to decide on the relationships you want for this position. The question is - who will decide pay increases for this position?...who will approve vacation time? That manager is the one who is the directly managing the position and so the position must be in the org structure for that manager's org unit.
Second, what is the relationship to the other manager? This is usually a "dotted-line" or functional reporting relationship to another position. You can use a standard relationship such as 005 or create your own.
Then you can use the Matrix to create the two relationships. Easy Access: Human Resources --> Organizational Managment --> Organizational Plan --> Matrix (transaction PPME). Use the "Standard selection" and create the two relationships between the position and the org unit and other position (or other object depending on your requirement).
Paul

Printing "Continue.." when report exceeds more than one page

Similar Messages

Maybe you are looking for