Printing from ActiveX Control in crystal report 10 in IE7 not working

Hi,
I am using ActiveX Control for printing in Crystal Report version 10 using Java. When I click on print button, ActiveX control dialog box opens and then click print button, the dialog box shows it's printing and does not stop and there is no print on printer. If any body have idea to resolve this issue, kindly tell me as soon as possible.
Thanks in Advance,
Nasir Nawab

Hello,
CR 10 is not supported in IE7. It may work if you use the Legacy mode in IE7. Also check your pop-up blocker and allow ActiveX controls to be installed.
Thank you
Don

Similar Messages

Conversion from VS2003 to VS2005 Crystal Report View is not compatible

I am trying to migrate an application from VS2003 to VS2005. I am trying to run it locally, using the localhost method. I am getting a parser error: The base class includes the field u2018CrystalReportViewer1u2019 but itu2019s type (CrystalDecisionsWeb.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)
I have a tried a number of solutions, including removing and then readding Crystal Report references (picking the 10.2.3600 ones).
I also created a websetup project, trying either the windows installer and the merge modules. Those both gave me the error "The setup requires Internet Information Server 4.0 or higher and Windows NT 4.0, Windows 2000 or higher. This setup cannot be installe don Windows 95, Windows 98, or Windows ME. Please install Internet Information Server and run this setup again." so I guess I don't understand how localhost works, but I know it's not a true web server.
I also followed a post to delete the assembly information that was in my web.config, which was <add assembly="CrystalDecisions.CrystalReports.Engine, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Shared, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
and expected it to be readded when I re-added my references and rebuilt but there is now just an empty <assemblies></assemblies> tag.
Note that I have VS2003, VS2005 and VS2008 all installed on my computer as we have application in various stages of conversions. I think I just downloaded SP1 for Crystal Reports for VS2005 but it doesn't specify when I do Help-About in VS so maybe I didn't.
I have spent so many countless hours and only just found this forum buried under the rather confusing SAP website.
Thank you SO much for any help,
Penny

removing all of the references and adding the 10.2 references is a good start. the problem is most likely that you still have a 9.1.5000 reference to CrystalDecisions.Web in the HTML source of your web form with a viewer control on it. Easiest way to upgrade that is to delete the viewer control and drag a new one on from the toolbox. the drag and drop of the viewer control is what will populate your "add assembly" tags.
Dan

The "next" button of crystal report viewer does not work

hi
I use crystal report viewer control to show my crystal report on my aspx page.
like:
<CR:CrystalReportViewer id="CRViewer" runat="server" HasRefreshButton="False" PrintMode="ActiveX" DisplayGroupTree="False"
AutoDataBind="True"
SeparatePages="TRUE"
Height="520px"
Width="900px">
</CR:CrystalReportViewer>
however when I try to navigate to next page by click "Next" arrow button on the crystal report viewer toolbar, it only can navigate to the page 2, whatever I click the "Next" button, it still stay on page 2,
actually this report has 10 pages.
On the other hand, if I input the page number, such as 5 on the "goto" textbox, it will jump to page 5 correctly.
Could you give me any good advices to solve this problem?
Thanks.

There are a few threads discussing the issue in this forum. See if these provide some guidance:
"Next Page" wont go beyond page 2 in Html Viewer (Crystal.NET for VS 2008)
Re: Crystal Reports .NET Visual Studio 2005
Problem in CrystalReportViewer
Ludek

Crystal Report .csv export not working

Hi Folks,
I developed reports in Crystal Report XI R2 version (with service pack 6) and calling them from Power Builder 11.5. When I export the report to .csv format I see only parameter names with values (supplied to call this report) in csv file.
For eg:
Parameters are
Start Date: 01/01/2012
End Date: 02/01/2012
CompanyID: 21234
Regular output:
colum1 colum2 ...... columnn
data1      data2             datan
data1      data2             datan
data1      data2             datan
..... 10 records
csv output looks like this:
Start Date 01/01/2012 End Date 02/02/2012 CompanyID 21234
Start Date 01/01/2012 End Date 02/02/2012 CompanyID 21234
Start Date 01/01/2012 End Date 02/02/2012 CompanyID 21234
..... 10 records
Please let me know what changes should I do.
Thanks
Indra

One more move to the correct forum; Legacy SDKs - SAP Crystal Reports
What CR SDK are you using?
How does an export to txt, CR and pdf look?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal Report Add-On not working

Hello Experts,
We have freshly installed Crystal Reports Add-On. when we start the add-on it says it is connected but when we try to access any of the forms in the Crystal Reports sap screen comes up with a message window stating
"There is already an open Datareader associated with this command which must be closed first"
which does allow any further transactions in crystal reports screens.
regards,
shreyas

Thread moved...
Please post Crystal Reports related questions only in the forum
Best regards,
Darius

Help - Crystal reports 2008 - will not work

I am a Systems Administrator for a small company of 450 users.
I am unfamiliar with Crystal reports
We have a recent problem with Crystal Reports 2008, only 1 user in the company uses it.
Since I recreated a windows profile on this users PC who has Crystal installed.
She is using .CSV files as her data sources. These CSV files are on her local machine.
She is trying to load an RTM template file, then do a refresh, and it asks for a datasource?
We try to select Excel, but it asks for a username and password to connect to the excel Datasource, and anything we type in fails.
Previously a refresh just worked.
I uninstalled reinstalled, still asking to select datasource.
I installed this originally 4 months ago and we did not have this problem.
Can you please assist?

Hello,
Sounds like possibly a Microsoft update which altered the security settings either on the CSV or the folder where it's located.
Can she create a new report off the CSV if she copies it locally? I assume the csv is on a network share?
Don

Crystal report export button not working

Hi i have a problem with a crystal report.......that in a crystal report when i click the export button the page refreshes and my report is dissapears but nothing happens i am unable to export the report in any format what shoould i do....if u wan to see the code than i would also provide it on demand....
It gives an error of Failed to export using the options you specified. Please check your options and try again.

Sounds like you are using one of our SDK's and wrote an application.
Need a lot more info.
Don

Suppress embedded field blank lines in Crystal Reports XI is not working

Hi,
We have a text box in a Crytal Reports XI report which has address information in it as follows:
These are individual fields from the database. We check the "suppress embedded field blank lines" option for the text box and preview it in the designer and the suppression works as expected in that when the unit field is blank the whole address line isn't suppressed. However when we run this report using the Report Viewer control in a VB.NET 2005 application the whole address line is suppressed when the unit field is blank.
This appears to be a bug in the suppression logic when the Report Viewer is used to view a report. While yes we can embed a formula into the address line this adds extra maintenance and confusion which is not necessary as it works as expected in the report designer.
I have seen others which are having a similiar issue and the only suggestions are to create your own suppression using formulas, etc. which is only a bandaid and is not the best solution as the suppression works as stated in the designer but not in the viewer embedded in an application. Please indicate if this is a known bug and if this issue has been addressed and fixed in a new merge module.
We are running Crystal XI 11.5.0.313 for the report designer and have deployed the needed dlls to run the reports with our application using the CrystalReports11_5_NET_2005.msm merge module.
Thanks in advance for any assistance in resolving this issue!

Hello,
Moved to .NET SDK forum.
Upgrade to XI R2 SP 6, you are using the original release:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
And the distribution files are for Visual Studio version of Cr, not R2 build.
https://smpdl.sap-ag.de/~sapidp/012002523100013451312010E/crxir2_fp64_server_ins.zip
Or
https://smpdl.sap-ag.de/~sapidp/012002523100013451332010E/crxir2_fp64_net_mm.zip
Don

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

Exporting or Printing each page of a Crystal Report to a separate pdf file.

Is there a way to export or print each page of a Crystal report to a separate pdf file? If possible, I would look to use the family nunmber field in my report as the file name. This is not required, but would be helpful. Thanks

Hello,
Standalone CR Designer doesn't have the ability but CR Server or BOE does. Or if you have a .NET or Java you could write an app that would spit out one page at a time.
Don

Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Hi Friends,
I am new user for SAP crystal report,
can any one help me for
Print Issue in VS 2010 Crystal Report Version 13.0.1.220

Font must be True Type and on the WEB server where the report is being processed.
Run Process Monitor and see if your app is loading the Font....
Typically if the characters show up as a box it means either the font you are using does not support UNICODE characters, it's not installed so font substition is done but the font used doesn't have the Glyph's required or there is a permission issue with the font being instlaled under a local User account and should be installed under the Admin account.
Also, Search for Font and Windows Framework, there are known limitations with .NET Framework and some fonts.
What font are you using?
Don

Display Document from BI Server in Crystal Report

Hi all,
I accessed BI Query from BI server in Crystal Report. We can upload any comments or documents to the query. I want to display the document and comments in Crystal Report from the BI server.
Is it possibel? If possible how can i do this?
Thanks & Regards,
Hemalatha J

As I see there was no response on these issue although it is marked as answered. I'll give a hint for the ones that might want to try this.
One could extract the metadata and documents from the tables names to be found in the tables SDOKLOTAB and SDOKPHTAB (as an example, for InfoObject documentation we have the tables BDSLOIO8, BDSLOIOT8, BDSLOPR8, BDSPHIO8 and BDSPHF8) or one could export the metadata from the BI repository (though, this is a manual approach).
Edited by: marius.grunca on Apr 27, 2009 5:58 PM

Crystal report 9 supports frame work 2.0

Hi experts,
we are using Crysatl report 9 and build the reports using VS2003 with the frame work 1.1.4322.
We are fetching the online report by deploying the same in the IIS server which has the frame work [1.0,1.1,2.0].
When we use Asp.net frame work 1.1.433 in the virtual directory, we have are not getting any issue.
If we go for Asp.net frame work 2.0.50727 in the virtual directory, we are receiving an error message in the event log as below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/19/2011 10:44:31 AM
Event time (UTC): 12/19/2011 5:14:31 AM
Event ID: 3099bcd049ab452cab409d38c750f222
Event sequence: 6
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/Root/Solitair-Reports-2-129687452447349006
    Trust level: Full
    Application Virtual Path: /Solitair-Reports
    Application Path: C:\SOLITAIR\KAReportingSystem-Solitair\
    Machine name: AAA
Process information:
    Process ID: 3936
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
Exception information:
    Exception type: SqlException
    Exception message: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Request information:
    Request URL: http://localhost/Solitair-Reports/Main.aspx
    Request path: /Solitair-Reports/Main.aspx
    User host address: 127.0.0.1
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\SYSTEM
Thread information:
    Thread ID: 1
    Thread account name: NT AUTHORITY\SYSTEM
    Is impersonating: False
    Stack trace:    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at KAReportingSystem.MainForm.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\KAReportingSystem\Main.aspx.vb:line 28
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Kindly advice me
Thank you
Deepan
Edited by: Deepan1 on Dec 19, 2011 2:20 PM

Hi,
As you must have guessed, Crystal reports 9 is not compatible / tested / supported with .NET 2.0.
Take a look at below wiki.
[http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567]
- Bhushan.

Crystal reports 2008 will not allow multiple exports in a row

I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?

Im not sure I agree with you designation that this report should be in the report DESIGN forum. I
My problem has nothing to do with report design in my OP. The MAPI function (in crystal reports itself) will not populate addresses once I export 1 report. When I try to export a second report that is when it quits works. This is basically the same problem that a hot fix or fix pack corrected but now instead of now working at all. I can only export 1 report before the same mapi issue happens????

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

Printing from ActiveX Control in crystal report 10 in IE7 not working

Similar Messages

Maybe you are looking for