Printing from LinuxMint-17 to HP7525 cuts-off top and bottom of pages, enforced 15mm margins

I am printing a page from my bank (Fidelity), but there is an enforced margin of 15mm at the top and the bottom of the printed page.
This cuts-off most of the form name at the top of the page and the most of the barcode at the bottom of the page.
I find I have to "take screenshot" and import into "gimp".  Then crop the page and then print directly from "gimp" to print the entire form.  I have tried to teach this to my wife, to no avail.  I wish HP would fix the drivers to allow Linux to print inside the margins.  There is no problem printing from Windoz XP, but that is using an old hard drive and the computer runs dog slow and is ready to die.
Again, HP please update the linux drivers so my brand new printer will work as it is supposed to.

Hi @Jimec ,
I have brought your issue to the appropriate team within HP. They will need to get information from you to look up your case details or serial number. Please look for a private message.
If you are unfamiliar with how the forum's private message capability works, you can learn about it here.
Thank you,
George
I work for HP

Similar Messages

  • Saving Illustrator file as PDF/ chops off top and bottom help pls

    I have some business brochures that I created in Adobe Illustrator
    I am tying to save one as a PDF however when I do the save it chops off the top and bottom of the page
    Help Pls  

    More help please another brochure I have created with illustrator When I try and save this file to as a PDF  after it save the PDF all I can see is a thin strip and in the 5% zoom box it shows a huge number 5166  thx

  • My HP 1005 laser printer cuts both top and bottom lines in half

    I have a 2nd hand HP 1005 laser printer and every time that I'm printing a full page it will cut on the first page the bottom paragraph in two and
    the other part will appear on the the other page. The page is set on US Letter and sometimes I have to scale to about 90% but the
    font will be small. So what can I do to fix this annoying problem?? I have a Canon printer too and it never printed this way even out of
    the box it always printed the last paragraph in full without any adjustments. Any help with this would be welcomed!!!
    THANKS!!!
    Serge

    Try downloading the latest HP driver from Apple.   Both the Laserjet P1005 and M1005 are listed on:
    OS X: Printer and scanner software available for download
    which suggests if having the latest HP driver, you may fix any issues on Snow Leopard through Mavericks.  Double check HP to find out if there is a more recent driver for your printer as well for Mountain Lion.

  • Try print from Microsoft Word XP : printer (HP Oficejet 4500 G510n-z) lops off top of random lines

    try print from Microsoft Word XP: printer (HP Officejet 4500 G510n-z) lops off top of random lines

    CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
    Now what?

  • HT201335 Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Photosmart c4480 cutting off top of photos

    hi, i bought this printer today and thought i would give it a test run on photos from a memory card on 6x4 paper but it keeps cutting the top of the photo off a little bit
    am i doing something wrong? is there a way of stopping this happening?
    thanks mandy

    It has to do with how all the camera sensors are made.
    You can't change the aspect ratio in the camera.  You need to crop the photo using some sort of photo modification software.  I think all the picture editors have a crop function.  So, the picture is a 4x3 aspect ratio.  You need to cut about 10-12% off the short dimension on the computer. 
    Of course, the dorky workaround is to always take pictures with about 5% of stuff you don't care about on the top and bottom of the picture.  So, you zoom out a little, and, when you print the picture, it will crop stuff that's okay to crop.  Of course, if the pictures are already taken, that doesn't work.
    Sorry about the frustration!  
    Let me know how it goes!
    CF
    I work for HP and hope to make your day Sproutastic!

  • Why does the top and bottom of my clips get cut off?

    Hi, I'm new to iMovie and I've encountered an annoying problem. I imported all my movie files from my flash drive without any issues. I dragged a clip from the section with all the clips to the play reel. I previewed the clip, both normal screen and full screen, and both times the top and bottom of the clip was cut off. I tried it again with different clips but the same thing kept happening? Can anyone tell me why this happens because my head keeps getting cut off and I don't like it one bit.

    First, you can go into File/Project Preferences and adjust the aspect ratio of your project to either widescreen (16:9) or standard (4:3), to match your footage.
    You can combine footage that is widescreen and standard in the same project. In this case, you have to tell imovie how to handle the clips that do not fit the overall project aspect ratio. To do this, you can select a clip in your project and use the Rotate, Crop, Ken Burns Tool. If you select FIT, it will preserve the whole frame by inserting black bars (letterboxing). If you select CROP it will cut off the top and bottom. You can select the default for this in Project Properties.

  • How to remove web data from the top and bottom of my Ebay invoices so I can print them without it.

    When I create my Ebay invoices, (which are generated through the browser in a new window) data is also generated at the top and bottom that I don't want to show on the invoice. The data is the date and time at the bottom, together with the page number, and at the top it shows the web location. In Explorer, you can remove this before printing but I can't work out how to do it in Firefox. Help please!

    Hello!
    You can change that in Page Setup, choose the "Margins & Header/Footer" tab and chose "--blank--" instead of the data that you don't want it to appear.
    You can visit [https://support.mozilla.org/en-US/kb/how-print-websites#w_margins-and-header-footer How to print websites] for more details.
    I hope that helps,
    Have a nice day

  • Ghosting from top and bottom of the workspace edges when moving around workspace?

    When I move around the workspace dark grey slightly transparent bars appear to be ghosting from the top and bottom of the workspace. If I move so they go off screen they disappear but more are made as I move around. Tried restarting Illustrator and my laptop, I have the newest version of Illustrator CC.
    *Update - It appears to only happen in my one file, when an image I'm drawing over is put on a lower opacity. If I have it opaque there's no weird line ghosting, but as soon as I make it more transparent the lines start appearing.

    All I am doing is the following:
    import my mov file that is 1024 x 820
    create a sequence that is 1024 x 768
    export the sequence
    I made a video showing the steps (very boring, sorry).
    I'm sure there is something simple I'm missing. i'm 99% sure my result is wrong from the looks of it in the movie player.
    here is the video:  https://www.dropbox.com/s/5wjs8p3v0sjh8uv/livewriterdemo_fromcamtasia_final.mov

  • Elements 8 [Mac IOS 10.9]:  4 X 6" borderless printing -- top and bottom 1" are cutoff in Portrait and right and left 1 " are cutoff in Landscape

    I am using Elements 8 [with a recently installed Mac IOS 10.9] and a new Epson Artisan 1430 printer .  When I print 4" X 6" borderless photos, the top and bottom 1" are now cutoff in Portrait orientation and the right and left 1" are cutoff in Landscape orientation.  I do not have the same problem printing from iPhoto.  Epson tech support says this is not an Epson problem.  Does anyone have any suggestions?  Maybe I should just install Elements 12 and see if this might solve the problem.  Any ideas?   

    When you have the problem, note the exact time: hour, minute, second.   
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

    How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

    Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
    Check your printer's page settings.

  • How can I print the top and bottom halves of 11x17 PDF on 8.5x11?

    I have a multi-page 11x17 PDF of quiz cards designed to be printed double-sided so that a question appears on one side and the answer on the other side. (Page 1 has the questions; page 2 has the answers.)  My printer is 8.5x11 so I would like to print the top half of 11x17 page 1 onto 8.5x11 page 1 and the bottom half of 11x17 page 1 onto 8.5x11 page 2. Then I will flip the 8.5x11 pages over and repeat the process, this time printing 11x17 page 2.
    Is there a way to print the top and bottom halves of an 11x17 PDF onto two 8.5x11 pages?
    Thanks!

    The easiest solution I know of requires you to have a copy of Adobe InDesign. You can easily layout PDFs within InDesign in the configuration you want and create a new PDF.
    I don't know any way to print it directly in that layout, unfortunately.

  • Can you trim top and bottom black from videos?

    Hi
    I have a project where I need to make all my video clips the same height.
    Some of the clips are in widescreen, and I'd like to trim the black from the top and bottom so that I maximise the height of the footage.
    Can this be done in elements, and if not, are there any programs that you can do that in?
    Thanks for your time and help.
    Shaun

    John,
    Glad that you found it. I use it constantly, as I often animate my Titles with Keyframed Effects, and will just Copy/Paste Attributes to all. Same for Effects that are common to multiple Video (or Audio) Clips.
    One caveat: when planning on use it, do one Clip with the complete Effects line-up, then Copy. Select all other Clips that you wish to Paste Attributes to. If you have already added some Effects, beyond the Fixed Effects, you will get multiple instances of that/those Effect(s), i.e. if you have already added Color Correction to the destination Clips, an have Color Correction in your source Clip, you will likely get 2 instances of Color Correction. Plan ahead, so that you do not have to go back and Delete any duplicated Effects.
    Good luck,
    Hunt

  • Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper  right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

    Hi,
    Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

    Hi Warunicorn,
    Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
    Jim

  • Get rid of the white space at the top and bottom of the report when Printing as PDF document

    Hello All,
    I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
    tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
    margins for the report and it was 0in. Please help.
    Thank You

    Hi There
    In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
    property of the report to “True”.
    Please try to adjust your margins (top + side) and hopefully this problem will get resolved
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    If you have any questions please ask.
    Many Thanks
    Syed Qazafi Anjum
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

Maybe you are looking for

  • While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

    Hey, I  am using video clips from sony digital hi8 camera and trying to import  video clips (.mov) 720*480  fps 29.97 .But unable to get into premiere  pro cs5.System configuration: MAC 10.6.4 2.66ghz intel core i7 4gb ram nvidia geforce gt 330 mn. E

  • Fix a video that has been recorded in full zoom?

    Is there a way to zoom out during editing or de-pixelate? I must have zoomed in by accident while recording on a tripod. Half the video is fine, half is in full zoom and therefore poo. Is there any way to correct this through editing or something? Or

  • Using dbms_job for the 1st time

    I am attempting to use dbms_job for the 1st time and doing some test, but I can't get it to run. Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 1 10:36:18 2006 I have alter system

  • Unable to install Exchange 2007 SP3 Rollup 13

    Grettings, I have a Server 2008 SP2 (64bit) DC with Exchange Server 2007 SP3 installed. I have followed all the pre-reqs per http://technet.microsoft.com/en-us/library/ee221147%28EXCHG.80%29.aspx?ppud=4 However, it keeps failing. I've run the install

  • App Store shows I downloaded Yosemite, but it failed

    When downloading Yosemite, it fails, but the app store won't let me download it again as it shows that I downloaded it already.  Any way to tell the app store I need to download it again?