Printing in a Pre-printed Form

Hi,
One of my jsp page is suppose to generate another page to be printed in a pre-printed form....is it possible?? Could you give me any Idea how??
thank you very much
...spryt :D

You would have to give the end user a configuration screen where you set the coordinates and sizes of the data fields you wish to print on.
Commonly, there is a test screen where you can do an alighnment test to make sure all the fields are lined up and maxed out.
Then during real use, you print real data. Simple.

Similar Messages

  • Printing on a pre printed stationery

    Hi,
    I am trying to print data on a pre printed stationery. On one physical page two copies (1+1) of report is printed horizontally side by side. On each logical page there is repeating frame that displays 4 rows of data across the page.Now as soon as the number of records become > 4, the 5 th record instead of moving to next physical page, overlaps and sets on the logical page on the same physical. what could be done such that the 5 th record and onwards prints on the next physical page alongwith the copy of the 5 th record also displayed on the next logical page.
    thanks
    Prashant Mishra

    Not sure if I fully understand your description, you might like to give an example of what data you have and what you want on each page.
    However, for pre-printed forms, you typically use a fixed size frame to define the area that a repeating frame can print into. Alternatively you can use the "max records per page" property if you can guarantee that each record will only take up a specific amount of sapce.
    Where physical vs. logical pages are concerned. You can only have multiple physical pages making up a single logical page. In your case, you seem to want to have multiple logical pages for each physical page. Since Reports will insert page breaks after each logical page, it will be difficult to do this.
    If you need to get two sets of records onto a single physical page use an "across->down" repeating frame for a single repeating frame that encompasses one half of your physical (and logical) page.

  • How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

    This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.)  Only the user-entered info should print on the pre-printed form.  Users will use Adobe Reader to complete their templates; they do not have Acrobat.  Thank you!

    Use the template as non-printable background and add the form fields.

  • Pre-Printed Invoice Smartform Pagebreak

    Hi,
        I have designed the smartform as per the client Requirement ie in a Pre-Printed Format.The Pre-printed format contains the header and Footer, header contains Plant address and Footer contains the Privacy Policy.Every thing works fine...
    I have to display 2 tables on relted to SD module and the Other Related to MM I have retrived these Details and are working Fine  and after this ie at last before the Footer I have to display the Terms and Conditions. The Print format is Dotmatrix and it takes the carbon copies(4) of Invoices
    But My Prob is how to get the Page break  in the Preprinted Smartform for the Second Table if  it has many records to be continued to Print in the next page (I have declared in My page as NExt page as Page1 itself). I dont know how many records the tables have to be displayed ,it will be dynamic..
    Could u suggest me in this....
    Regards,
    Vijaya Lakshmi.T

    Solved bY myself

  • In Sapscript, print page 1 on printer 1 and page on printer 2 -(tray setup)

    Hello Experts,
    We have a requirement in our cheque printing program wherein we need to print on different printers.
    I think this has something to do with trays in sapscript. Because for page 1, we need to print
    on a pre-printed form and for page 2 onwards we just need to print it on an ordinary papaer.
    Can you please tell me how I can achieve this and how do we customize it in sapscript?
    Hope you can help me guys. Thank you and take care!

    The resource names are already set by SAP. TRY01, TRY02, TRY03 which correspond to the same trays in the Printer setup (txn: SPAD, Tray Info window). I suspect there are more possible values (some printers have more than 3 trays) but I've never seen them documented.
    Note, your basis team needs to make sure the tray settings are in SPAD and the print drivers are set correctly.

  • Pre-printed forms on IBM 5577 dot printer

    Dear all,
    I was wondering if there is any SAP tool in order to use pre-printed forms (with specific layout) on IBM 5577 dot printer which would allow to speciy a pre-defined layout.
    Or do I have to define for each field the position on the pre-printed form thanks to SAPscript editor?
    Regards.

    HI Cany,
    There is no such tool to identify the problem .In scripts and smartforms we have to define the layout pertaining to printer and its configuration settings.once the layout is defined and the printer is defined during the printing the printing begins automatically.in ur case u r talking about pre printed forms like application forms like cases, for this we have to know the length of the form initially and take care to identify the length of the field and also position.Hope u understand this.

  • Generating smart form on a pre-printed paper

    Hi, Can any one let me know how to develop a smart forms on a pre-pinted paper..? As i am facing lot of issues in layout alignment..

    hi bhanu,
    there is no difference on samrtfroms printing in pre-printed or normal paper .
    just you have to set text in small windows according to pre-printed page.
    regards

  • Printing from APEX onto pre printed forms - not PDF

    Hi
    What is the best solution within APEX for printing. I am looking to print out data within an interactive report record onto a piece of pre printed stationary. So fields from the database will need to be positioned on certain positions on the print out
    How can this be achieved? I have seen examples generating a PDF but I do not want a PDF to be generated or stored when the page has been printed.

    Or Oracle Reports as a cheaper option, if your infrastructure is suitable.
    Done that for pre-printed forms before - pixel perfect, just not for APEX. But it's easy to call Oracle Reports from APEX.

  • Pre printed forms

    I am printing W2's on a pre printed form and some of the fields are randomly moving up and down. Some forms print perfect others are all over the place. Anyone have a suggestion.
    Thanks,

    Hi,
    Please check if you have the form online from the state/agency providing this form. If it is online you could try to open this form with Adobe Reader and print it.
    If you have a hardcopy pre-printed form, then you will need to scan it to your PC/system and then open the scanned form with Adobe Reader and print it.
    Hope this helps,
    Lucia

  • Printouts in Pre-Printed Forms

    Hi all,
    Please advise, if we can take printouts of invoice in a pre-printed forms.
    Thanks,
    Balaji

    Hi, Arshdeep Singh 
    cld u explanie breifly plz.
    we have 10x12 formate in inches how we can set in PLD. in
    tally thr TDL we can set exactly what we want. here is there
    any tool we have ? in ALD we have inches only. only problem
    we are facing to adgust in repetitive area 0 here feilds are not
    printing exactly in particular cell. how we can adjust ? is there
    any to do this?

  • Pre-prints forms

    hi everybody
    someone can help me..??
    I need to print some data in a paper pre-printed.
    (style like a bill). known as someone I can develop, so that people only write the missing data in preprinted paper
    Thanks for your help
    [email protected]

    hi everybody
    someone can help me..??
    I need to print some data in a paper pre-printed.
    (style like a bill). known as someone I can develop, so that people only write the missing data in preprinted paper
    Thanks for your help
    [email protected]

  • Pls Help! Adobe reader 9.0+ generated barcodes on pre-print is problem

    hi to all,
    I have a really strange problem and would like to share with you.
    Im generating the barcodes on the pre-print event, using LiveCycle Designer 8.0.
    Everything is ok when im trying to generate 2/3/4 barcodes in my form.
    The PROBLEM is if I decide to add more than 5 barcodes in my form and try to print it.
    Then - when I decide to print the form and to fill the information in my barcodes - the Acrobat Reader is just closed.
    No error alert..just closed. When i debugged the problem I saw that generating of barcodes is starting, but if there are more than 5 barcodes,
    the adobe reader closed before all barcodes to been generating.
    I do think about no enough memory, or something like that..but have no idea really what’s that.
    Do u have any idea what’s that problem..
    thanks in advance for yr time
    Regards

    Try and print the PDF as an image.
    Also when you send this to someone else are hey able to print without an issue?
    Have you've tried another printer?

  • Print Freight Terms on quotation form

    Hi ,
    Customer requirement -Print Freight Terms on quotation form. Freight terms are  Pre paid , Pre paid  and Add, Collect, 3rd party.
    How I can do this functionality, please help me in this business scenario.
    Thanks,
    vmr

    Dear Malla readdy,
    Incoterms will be maintained in customer master sales area data section inbilling view.
    Here you maintain the Incoterms.If incoterms are not visible in your customer master, it might be in supress mode so make it optional in (OBD2).
    Inco terms will be stored in KNVV - INC01
    So co-ordinate with the technical consultant in order to fetch the data to out put form
    Please revert if you have any further clarifications
    Thanks&Regards
    Raghu.k

  • How to print page numbers in adobe form

    Hi,
    Can anybody tell me how to print page numbers in adobe form.
    Thanks in advance
    Chaitanya

    Hi,
    Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
    My requirement is to have the user control on current page. For Example:
    Example for a Invoice with 5 PO items (stands on 2 pages) :
    1st  page is the letter : no page number
    2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
    3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
    4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
    5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
    Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
    I have used the follwing java scripting:
    this.rawValue = wv_pages - xfa.layout.page(this)
    where wv_pages is total no of pages calculated from print program.
    Please help me in this regard with some formcal or java scripting conditions.
    Thank You,
    Regards,
    Naresh.

  • Print layout in case of pre printed continous stationery

    Dear Experts,
    I have one query related to print layout designing.The issue is the PLD is set for an Invoice in the pre printed stationery & the printer out is take using continuous stationery the problem which i have faced is 1 page is printed properly but for 2nd page the print again starts from top so again the user have to do manual setting & print the 2nd page.
    Thanks & Regards-
    Manmath Das.

    Dear Manmath Das,
    It is too difficult to handle the print on pre printed continuous stationery by PLD. PLD is a very basic tool. You may only get it work by endless try and error to see.
    Thanks,
    Gordon

Maybe you are looking for