PRINTING: Keynote will only print to a certain page # then stops

Just to get this out of the way: iWork '08/Keynote 4.0, Mac OS 10.4.10 and everything has been updated. I also looked for other strings relating but could not find any.
I have a few reports created in Keynote that will only print to a certain page. Each report prints the same page every time, but the page # differs for each report. For instance, one report will print to page 32 out of 64, another to 42 out of 70, etc...
Further, if I select the pages that were missing, they will not print at all.
I have tried different printers, networks and printers. Other programs (Word/Excel) will print in total.
Has anyone heard of this problem/have any advice?
Much thanks,
Matt

Not Charge
- See:      
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
  Apple Retail Store - Genius Bar 

Similar Messages

  • HP Envy4500 Printer. Will only print certain fonts.

    Windows 2007
    I cannot get the printer to print on common fonts such as aerial or times new roman.
    Is there a way to change this or is there a limited number of fonts that work on this printer?

    Hi larryhogan100,
    I wonder, does this issue occur when you copy? I have a feeling the issue is stemming form the computer and not a limitation of the printer. I would like to recommend you remove the driver from the Printer Server Properties and re-add it. Please use the instructions below.
    1. In the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
    Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
    3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
    After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software. If you do not see HP Setup and Software, click on the printer icon and the Setup and Software will open. Here is an image of the screen we are looking for. 
    Click on 'Connect a new Printer' and follow the on screen instructions.
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • PSE 13 recognizes printer but will only "print" as .xps

    I am trying to print photos using PSE 13 and it shows my printer as an option but after I click "print" it goes straight to the "Save file as" menu and I can save it as an .xps like my printer isn't there. I have tried uninstalling and reinstalling all the printer software and the PSE 13 software and it still fails to print.

    Hi James,
    Did this printer work correctly before ?
    To verify whether it is related to the printer ,please plug it in another machine to have a check if it is possible.
    Considering it is a USB device ,plug in  with another port to have a check or try to update the USB controller driver or reinstall the USB controller driver to have a check.
    Please check whether the Event Viewer contains  errors or warnings related to this issue .
    I found a similar symptom in the HP forum ,the solution in it may be helpful:
    HP LaserJet Pro 400 M401dne print only one page (document)
    (720 Views)
    http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-LaserJet-Pro-400-M401dne-print-only-one-page-document/td-p/6456104#.VK5gLHkfrwo
    You may need to look for help from the HP forum at the same time .
    Best regards

  • Will only print one page of four page document

    I have an HP LaserJet M1212nf and it will only print the first page of a four page document.  I tried to check the preview settings and inserted "pages 1 to 4" and print "all", but neither works.  What to do?

    Hi @5867 ,
    I see that you are experiencing issues printing a multiple page document. I will certainly do my best to help you.
    From the application your printing from, go to File, Print, Number of copies select 2. Uncheck Collate. You can now change the number of copies. Collate should now stay unchecked.
    Try printing the multiple page document again.
    You might have to disable all the startup items, to see if there is another program causing this issue.
    How to use MSCONFIG. Click on the Startup tab and disable all.
    Test the printer.
    Then go back in and enable all from the Startup tab.
    Download and run the Print and Scan Doctor if you are still having issues. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What applications have you tried?
    How is the printer connected? (USB/Ethernet)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Please provide in detail the results if you are still having issues.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Laserjet 2100 will only print one page at a time.

    I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Appleworks will only print one page at a time, please help!

    hi there ~
    no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
    Could this be because the pages are arranged left to right? that would seem strange.
    also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
    THANKS SO MUCH!

    Hi td,
    Welcome to AppleDiscussions and the AppleWorks forum.
    "no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
    My memory says the same as Yvan's.
    If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
    A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
    regards,
    Barry

  • My printer is Hp printer 932C it will only print in black and white not color

    my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

    There are a few things to check:
    Make sure the blue tape has been removed from the nozzle plate.
    Print a diagnostic page as shown in method 4 here.  Does this page print color?  If so the issue may be your driver settings.  Check for a "Print in grayscale" setting and uncheck this box.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • CS5:  will only print in black and white after upgrading to yosemite.  I have updated all drivers and cs5.  Still prints in bw/greyscale even when picture is color.  Advice?

    Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw.  I can print in color from Word but not photoshop.  I have updated all drivers and cs5.  Any suggestions would be appreciated. Thank you!

    Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw.  I can print in color from Word but not photoshop.  I have updated all drivers and cs5.  Any suggestions would be appreciated. Thank you!

  • Designjet T520 will only print one page.

    Hi, Brand new Windows 8 HP PC printing to a Designjet T520, will only print one page.I have met this problem on laserjets in the past and resolved it by enabling/disabling mopier mode.However none of the drivers I have tried (many) for the Designjet T520 have the option to turn on or off Mopier Mode. After many hours spent troubleshooting, I formatted and installed the Windows 8 machine again from scratch.Even with this brand new install on a bran new PC, I still cannot print multiple copies to the designjet. In the same office, 3 other Windows 8 machines are printing fine to the same plotter and can print mutliple copies. The driver versions are the same on all machines. Hope someone can help.Thanks.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.

  • I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

    I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

    Select a document, CMD+P, and set the color options as shown here:

  • Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

    for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

    For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
    A couple of thoughts:
    (1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
    (2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
    (3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
    In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
    (4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

  • Printer will only print from computer won't copy from printer

    My  printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected. 

    Hi @sandylouise,
    Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

  • My document will only print using wireless once I log off windows.

    I recently purchased the HP officejet wireless 4500 printer.  I am able to send documents to print, but then get an error message.  They will only print once I log off windows.  PLEASE HELP!

    Terry101
    Welcome to the HP Community Forum.
    To a large extent, the difficultly can be related to the type of document you are trying to print -- and the application you are using to print that document.
    PDF documents can be tricky -- sometimes, especially if you are trying to print these from the Internet, PDF files can be stupid-hard to print because the format is messed up.
    You can take a look at the following - no garantees -- it might help you find something that will help nail down what is going wrong or maybe help you figure out a way to get what you need.  For example, if all else fails, you can perhaps take a Snip of the document on the screen, save the Image, and print that.  It is a sorry excuse for a workaround - but at least you end up with something on paper.
    Manage Print Output with Print Preview
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • I have a Photosmart 6510e that will only print after I shut printer off and then restart..

    After setting up my 6510e photosmart all computers are able to print ---laptop, netbook and my iPhone can eprint.  However, my desktop PC will only print once the printer sleeps (white light is dim) after I completely shut off the printer and then restart it.   I have updated drivers and software.  The message comes up "Unable to Communicate with Printer." 

    I have the same problem - I bought the 6510 printer yesterday and it seemed to connect wirelessly to my PC and shows as the default printer ok but when I try to print I get the message 'unable to communicate wirh printer'. I troubleshoot and am advised to switch on printer (it is already on) but when I switch it off and then on again the printing starts Ok. Very annoying and not what I had hoped for.....

Maybe you are looking for