Printing of Graphics and Frames ,not coming properly in dot matrix printer

Hi Experts,
I have one smartform layout for Good receipt note,have used the Logo and Frames .when i am printing in the Laser printer.everything is k.when i am printing in Dot matrix Printer(OKI Microline 380 24pin printer).the Logo and Frames are missing,but I could able to see the Print Priview Properly.
Could you give any urgent solution.it is very urgent.
Thanks in advance.
regards,
hpp

I agree with you that printing of Logo & Framesare not very supportive in Dot Matrix Printer.
You can ask the Basis consultant to check & change the printer setting & may be it may work, as you have already mentioned that it is OK in Laser Printer. The Dot Matrix printer is currently unable to read the Logo & frame for printing.
Regards,
Rajesh Banka
Reward points if helpful

Similar Messages

  • Smartforms Printing not coming properly in dot matrix printer

    Hi Gurus,
    We have implemented invoice printout using smartforms and required to use the dot matrix printer for printing.
    We are now facing the problem on the printout from dot matrix is different from the preview we get in the system. But the printout from Laser Jet is coming out correctly for the same smartforms.
    We are using EPSON DLQ3000 and we configure the output device using EPESCP2 as the Device Type. The problem is font size of the print out is all printed as courier size 12, but there are different font sizes in the smartforms.
    But when we use local printing (using SAPLPD), there is no problem, all different font size is printed.
    If we using to same output device to print some sapscript, everything is working well. Font size will print accordingly to the preview of the sapscript.
    Do you have any idea of the problem that we have. Thanks for your help.
    Regards,
    Lee Shi

    Dear Lee,
    Ideally the printout should come as it is shown in the preview.I remember once it had happened with me too.But in my case there is no problem with the settings at SAP level.When we checked we found the problem is with the printer cartridge.
    We co-ordinated with the system administrator and n/w guys.They in turn change the cartridge and issue was fixed.
    PS:In my case all SAP printout were coming properly except the smartforms.
    Regards,
    Ashutosh
    Edited by: ashutosh singh on Aug 18, 2008 10:20 AM

  • Printing on Preprinted form with EPSON LQ300 & EPSON LQ500 dot matrix print

    Dear Expert,
    im having requirement to print form on preprinted page whose size is 6*9 inches which is smaller than A4 size paper and using EPSON LQ300 & EPSON LQ500 dot mattrix printer. my question is that
    1)do i need to create diff.  o/p type for diff printer?
    2) also do i need to create page format with 6*9 inches lenghth or what?
    if is it so will this thing be created by BASIS person?

    When it's continuous paper, the printer is not able to detect "pages", so it must rely on paper dimensions you transmit.
    So, you must define new Z device type, Z format type and Z page format with these dimensions.
    For this device type, you must assign the Z format type and define "printer initialization" action by indicating paper length (you may copy the actions of an existing continuous format type like INCH11, for the device type you use, and adapt it). For example, we find the following "printer initialization" action for EPESCP/INCH11:
    # set page length to 11 inch (=66 lines at 6 LPI)
    \e\0x43\0x42

  • Printing w/graphics and borders...

    I have one small problem, when I'm trying to print an invoice from a osCommerce interface the packing slip to print includes in the shipping boxes straight lines and rounded edges which are not lined up on the Mac.
    This is OS X 10.4.6 and I can duplicate it on Safari and Firefox.
    Internet Explorer for the PC prints the invoices and packing slips fine with all lines and edges lined up, but Firefox along with Safari mis-align.
    The alignment isn't off by THAT much, but it does take away from it's professionalism.
    I'm hoping someone knows how to get around this.
    Thanks!

    I agree with you that printing of Logo & Framesare not very supportive in Dot Matrix Printer.
    You can ask the Basis consultant to check & change the printer setting & may be it may work, as you have already mentioned that it is OK in Laser Printer. The Dot Matrix printer is currently unable to read the Logo & frame for printing.
    Regards,
    Rajesh Banka
    Reward points if helpful

  • SAP B1 not printing on Dot Matrix Printer

    Hello everyone
    I'm trying to print from SAP B1 2007B PL:00 to a Dot Matrix Printer connected in network.I selected the printer and gave print.But it is printing one or two junk characters only.When i try the same in a laser printer it prints well. What might be the problem and solution for this
    Thanks and regards
    Raghu

    Hi
    The following dot-matrix printers are supported by SAP Business One.
    + Citizen PROdot 300                                               
    + Epson FX-880                                                     
    + OKI MICROLINE 320 Elite                                          
    If you are using the 2005 version you can use also the Epson FX-890.
    Paulo Calado
    SAP Business One Forums Team

  • Print to Dot-Matrix-Printer

    Hi,
    My actual job is to create an Report in Oracle Reports 10, running on an IBM AIX Unix Server and direct the output to an Dot-Matrix Printer.
    The Report is ready for Preview.
    What Parameter should be set as Report_DesFormat for that Dot-Matrix Printer?
    I found only the list HTML, HTMLCSS, PDF, RTF, POSTSCRIPT, XML but the Printer can not unterstand any of these formats.
    Thanks for any help
    Rolf Mamat

    Hi.
    Using one of graphical destination format can lead to unexpected results. What you should do is to configure your printer at the system OS level. Then you should include that printer into $ORACLE_HOME/guicommon/tk/admin/uiprint.txt file. The line you add to this file should be read as printer_name_you_specified_at_os_level:ASCII:1:some_comment:: For example :
    my_dot_printer:ASCII:Testing printer::
    Be aware of two colons at the end of the line.
    For a destination format you should use one of predefined formats (dflt, wide, ...) or you can make your own format file which should be stored in $ORACLE_HOME/reports/printers directory. And dont forget to define your report design in character units.
    Hope this answers your question.
    Best regards.

  • Printing line beginning aligment problem in dot-matrix printer

    in smart-forms i have two windows with same upper-margin and there is 10 mm space between them.
    i print both of them a text which two rows but in right window begining of text is sliding right , second row of second window begins one or two columns sliding right namely not printing properly texts by beginning in same column in the right window.
    my printer is oki microline 320 line printer.
    why can this be?
    thanks..

    Hi,
    Dot matrix printer.
    Problem with pritning with dot matrix
    About Dot matrix printer device problems
    Regards,
    Sandeep

  • Printing Barcode in Dot Matrix Printer

    Dear Experts,
    We have developed Smart form to print Barcode and it's printing fine in LaserJet printer & readable by the scanner,  We need it on Dot Matrix printer for (multiple copies) and tried the same with Dot Matrix printer it use to print but not readable with scanner.
    SAP Transaction - MIGO (GI Posting)
    Dot Matrix Printer - Epson DFX9000  & Oki data PACEMARK 4410
    Please help me to Print Barcode in Dot Matrix printer through Smart form.

    There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
    Could you also tell us what symbology you use, and do you use smart form new barcode technology?

  • THAI dot matrix printer model

    Hi,
      We have a unique problem with respect to printing Bank Checks on THAI characters.
    The existing printer being used is Epson 1170 which is a dot matrix printer.
    Customer wants to replace this with new printer model which supports continuous printing as well as THAI characters.
    Can anyone please help with the model being used for TH check printing at your environment. Thanx a ton for your help.

    Hi Madhaven,
    Since you need to switch to new printer, you can use HP printers.
    Please check this link
    http://www.hpgsc.com/solutionfile/SOLUTIONFILE2623.pdf
    Let me know, if any more help is required.
    Thanks,
    Anand.
    Reward points appropriately.

  • Smart form -Right Alignment is not coming properly

    Hi Folks,
    While Printing Smart form for Invoice ,using right aligned Paragraphs  texts are not coming properly.....but  using left aligned paragraphs text  are coming proporly....we want both left aligned and right aligned in same table ...for print preview it showing fine but while taking the print out it comes like this
    for eg:  ---
    Net amount
    1,000.00
          750.00
    2,000.00
            40.00
          100.00
          300.00
    30,000.00
    O/P showing like this ....i have checked all the options in right aligned paragraph but no use
    Kindly help ....
    Edited by: bismilpk on Dec 26, 2010 2:31 PM

    yes .....I solved....got the answer

  • WBS element output not coming properly .

    Hi ,
    I have a customized report with , project(proj-pspid) ,wbs element( prps-posid) as selection parameters . The output is coming preperly when project is given as output but is not coming properly when wbs element is given as input. I am using PSJ logical database . Not sure why in debugging while giving only wbs element it is going to 'Conversion_exit_abpsn_input' instead of teh conversion exit 'Conversion_exit_abpsp_input' . Any idea on how it can be resolved?

    Hi,
         Please refer the WBS element to PSPNR (PRPS-PSPNR) instead of prps-posid ,
         prps-posid refers to exit 'Conversion_exit_abpsn_input' and not 'Conversion_exit_abpsp_input'.
    Regards,
    Srini.

  • Condition value in billing not coming properly.

    Hi All,
    We have an issue wherein the condition value in billing document is not coming properly.
    When qty is multiplied by the price the value should come as 208.04 ( 54.51 * 4 qty ), but the condition value is coming as 16.77.
    We checked but could not find any proper reason for this.
    When checked in details of condition type, we can see the Condition Origin as manually entered, but we are ot ale to trace the changes and also who entered the condition manually.
    Kindly advise on the issue as it

    Hi Mr. Satish,
    I agree with Mr. Rajesh and for your 2nd question.
    We can easily track down who entered the condition type in order
    there are two possiblities
    Either user who created the order, enter that condition type, that will not recorded in the changes so you can see the user id at header level--> on sales data page "Created by"
    If some other user come in VA02 and enter the condition type then you can see it in
    Go to Menu "Enviroment" --> Click at changes --> your document number is there --> Execute and see who entered it
    Regards
    MT

  • Theme not coming properly

    Hi Experts,
    We are having Federated Portal and the custom theme XYZ is developed in Consumer Portal. The ESS/MSS iviews are linked through Remote Role Assignment from Producer portal.
    The theme is not coming properly. From Mashead to Top level navigation the theme XYZ is coming correctly but when I opens the page having iviews then the iView Tray is showing the SAP Standard theme and the content in the iView is sometimes taking correct XYZ theme.
    I have cleared Federated cache, navigation cache and also cookies, but still it is not coming properly.
    When I view source iView then
    <html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/sap_standard/prtl_std/prtl_std_ie6.css?7.1.6.0.0">
    Please suggest.
    Regards,
    Deep

    Try by re-starting the portal.
    This is rarely necessary when dealing with the SAP Portal theme.
    The advice from Sushil looks more like the solution as it is common to not upload the consumer portal theme in the producer portal. Because in an FPN the producer theme will be used when the consumer theme isn't found:
    [SAP Note 880482|https://service.sap.com/sap/support/notes/880482]
    http://help.sap.com/saphelp_nw04s/helpdata/en/5b/9f2d4293825333e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/46/06f6dc000a5a68e10000000a1553f7/content.htm
    "If you are using custom made themes or have modified any of the out-of-the-box themes on the consumer portal, an administrator must manually import these themes to the producer portal. "
    Next source of problems with themes is when your consumer and producer are on a different version (specifically when the producer is on a higher SPS or EHP) even when the consumer theme was imported into the producer.
    br,
    Tobias

  • My printer is Hp printer 932C it will only print in black and white not color

    my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

    There are a few things to check:
    Make sure the blue tape has been removed from the nozzle plate.
    Print a diagnostic page as shown in method 4 here.  Does this page print color?  If so the issue may be your driver settings.  Check for a "Print in grayscale" setting and uncheck this box.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

    Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
    Any ideas would be welcomed.
    Thank you.
    James
    <E-mail Edited by Host>

    Thank you for asking this question.  I'm having the same issues. 
    Liz

Maybe you are looking for