Printing problem with 8.0.  videos printing on paper

I have used acrobat 6.0 for years, and have made many forms for my customers. When I made these forms with 6.0 I put videos on the forms to explain how to use the forms then when they print them the videos are not printed. However now that I have purchased acrobat 8.0 these forms are printing the videos on the paper. I do not know why this was not available on 8.0 as it was on 6.0. Why was this not continued from 6.0 to 8.0. Is there a hot fix or something that can solve this problem for me? Has anyone else came across this problem? any help would be appreciated. Thank You.

Thanks for your response.   I may not have emphasized in my initial outline that all my other programs print fine on the Epson 7890; only printing from Photoshop is problematic.  Do you still think it is an Epson problem?

Similar Messages

  • Printing problems with Lexmark Wi-Fi printer linked to iMac

    We have a Lexmark X6570 Wireless printer. This unit works flawlessly with our MacBook Pro on the AirPort Express Wi-Fi system in the house, whihc was the first Apple computer we bought in September 2007. More recently, in November 2008, we purchased a second Mac, an IMac 24-inch desktop and linked it to the AirPort Express. The problem is that we cannot print via the iMac. Whenever we ask for a print of a Mail message, a Safari web page, an Adobe Reader page, a TextEdit page or a Pages file (when we are actually working on a draft), the application closes by itself and we get the following error message (for the Mail example): "The Mail application had to close unexpectedly. The problem could be caused by the IJPrintQuality module". By the way, the only time the printer actually printed from the iMac was when I open a saved Pages file. Then it prints OK and almost every time. But that is the only instance when the iMac prints from the Lexmark. We have spoken to Lexmark on numerous occasions and reinstalled all drivers and all Lexmark software on the iMac, but without success.

    For those running into this same prpoblem, Lexmark foun a solution for me. If you get that error message, try to access your HD -> Library -> Printers -> Lexmark -> PDE's folder. Under that folder, locate the IJPrintQuality, then remove it. Then try to print again. If you get another similar error message, you may also have to remove three other plug-ins: IJAdvancedOptions, IJColorOptions and IJPrinterServices before the programs stops crashing. I am now testing the printing of different documents from different applications, and it continues to work well.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Printing problems with hp laserjet 1018

    - printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
    - hp photosmart premium c309 works with all file types
    Windows 7 64 bit
    Adobe Acrobat Pro 10.1.7
    Acrobat Reader 11.0.3

    Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

  • Printing problems with Safari 5.0.3

    I just bought a new HP LaserJet Pro M1536dnf Multifunction Printer to allow me to use AirPrint on my iPad and iPhone. But now I have a problem with printing Web pages from the Safari 5.0.3 browser on my Windows Vista PC to the printer over my network. The printer does not print any type or graphics on the page although it does output several nearly blank pages each time I try to print. The only mark on the pages is a faint thin gray line at the bottom of each page.
    Safari is the only program where this problem occurs. The printer works correctly with Internet Explorer, Outlook, and Word. I did not have this problem with my previous HP printer.
    The M1536dnf also prints correctly from the Safari browser on my iPad through AirPrint.
    I also tried printing in Safari on a Windows 7 laptop on the network and had the same problem.
    Any suggestions?

    I reloaded the HP drivers. But that didn't fix the problem. Because the problem is only with Safari in Windows and not Internet Explorer (nor any other Windows applications), it seems to me to be a Safari problem rather than a problem with the printer. On the other hand, Safari for Windows printed correctly on my previous HP LaserJet 1022nw and its driver. I've contacted HP and they want to lay the blame on Apple. I have reported the problem to Apple as well and have heard nothing. Once again, after paying hundreds of dollars on new equipment to be able to print from my iPad and iPhone, the user is left to fend for himself. Others seem to be having this problem. Perhaps, Apple and HP might consider working together to the benefit of the customer.
    (One bright spot: the 1536 does print from the Safari browsers on the iPad and the iPhone.)

  • Printing problems with InDesign CS3 running on OS 10.6

    I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
    I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
    computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

    Hi again Peter
    It is version 5.0.4.  I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
    I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0.  I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it.  Then, when I got my new computer, I decided it was time to use the newer version.  However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader.  I contacted Adobe, and they sent me a patch which fixed it.  I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
    Richard
    Date: Tue, 15 Jun 2010 20:10:13 -0600
    From: [email protected]
    To: [email protected]
    Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
    I neglected to ask what version of indesign CS3 you are using. I also 
    notice that Mac OSX 10.6.4 has just been released. It actually 
    addresses some CS3-specific issues, though they seem to be related to 
    launching the apps, not printing. It may be worth trying to update, 
    nonetheless.
    Peter Truskier
    Premedia Systems, Inc.
    510-655-4454
    >

  • Printing problem with Summarize Comments?

    Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

    Um I dont know if im doing something daft but I tried this like you said
    PrinterJob printJob = PrinterJob.getPrinterJob();
    printJob.setPrintable(this);
    if(printJob.printDialog()){
    try {
              PageFormat pageFormat = printJob.defaultPage();
              if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
              landscape = 0;} else {
                   landscape = 1;}
              System.out.println("THE ORIENTATION IS "+ landscape);
              printJob.print(); }
    catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
    and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
    cheers
    pmiggy

  • Printing problem with 9.4 with Xerox WorkCentre 7435

    I have just upgraded my reader to 9.4.0 and having problem with Xerox WorkCentre 7435 printer. I have no problem with this pointer before the upgrade. I got the following error dialog when I print:
    Please help.
    Thanks.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system

  • HP Officejet100 Mobile L411a intermittent Bluetooth printing problems with PDF files

    Hello,
    Our company provides computer-hosted medical devices controlled by an application running on Windows7 computers we supply. We are currently using the HP Officejet 100 as a Bluetooth printer. In some of our customer offices, we experience printing problems using the printer in Bluetooth mode (there are never problems if the printer is connected by a USB cable.)
    The printing problems typically affect PDF files printed through Adobe Reader 10, and the symptom is one of the following:
    Send a print job to the printer. It doesn't print and eventually the print queue shows an "Error Printing" message. If any print jobs are removed and the printer is power-cycled, the problem goes away for the time being.
    2.  Same as above but power-cycling does not cure the problem and nothing will print, even a test page.
    In either of these cases there are no problems if a USB cable is used.
    The PDF files we are trying to print are typically 5 pages with 3 of the pages having a lot of graphics and the remainder being text only.
    Has anyone seen this behavior and is there anything we can do about it?
    Thanks.

    I don't anything about this printer, but I do know that bluetooth is really flaky with large files since it's got a crappy transfer rate, could be that the transfer is dropping and freezing the printer up. Does it have encryption turned on?

  • Printer problem with AW 6.2.9

    I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
    OSR
    Mac G4 Mac OS X (10.4.6)
    Mac G4   Mac OS X (10.4.6)  

    Welcome to Apple Discussions
    You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
    Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

  • Printing problems with Adobe SC3 on iMac 27"

    I have a printing problem: When I want to print something from any of Adobe CS3 applications they suddenly crushes. I work on new iMac 27” (Intel Core i5, 3,2 GHz, OS X 10.9.2). Adobe CS3 worked correctly on my previous Mac G5.

    Mylenium, thanks for replying!
    All Adobe Standard products I have: Illustrator, InDesign, Photoshop make problem with printing.
    When I get an order to print a page either on my Epson Stylus printer or PS printer application crushes.
    Dario Apostol

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Printing Problems with PDF - Adobe Acrobat

    Printer - HP Deskjet 3070A
    Laptop - Asus Zenbook running Windows 7 Home Premium
    Issue: Printing problems with PDF (Adobe Acrobat Reader)
    Dear All,
    Please help!
    My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
    Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
    I have tried fiddling with the printer settings; the  print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
    In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
    If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd  very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
    Much appreciation in advance x

    Hey there @Reverie!
    Thanks for posting on the HP Forums!
    I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer!  You mentioned you have run the updates and uninstalled/re-installed the printer software.  Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer? 
    I have located the HP Update Software Utility that may be able to help.  You can download an run the utility.  It may be able to locate any other updates for the printer.
    I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup.  It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
    Let me know if that helped and thanks again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Printing problems with InDesign CS3 with Mac OS 10.6.3

    I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3).  Although I can open CS3 and use the application, I cannot print with it.  None of my other applications has printing issues... just CS3.  Any suggestions?
    Richard

    Hi again Peter
    It is version 5.0.4.  I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
    I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0.  I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it.  Then, when I got my new computer, I decided it was time to use the newer version.  However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader.  I contacted Adobe, and they sent me a patch which fixed it.  I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
    Richard
    Date: Tue, 15 Jun 2010 20:10:13 -0600
    From: [email protected]
    To: [email protected]
    Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
    I neglected to ask what version of indesign CS3 you are using. I also 
    notice that Mac OSX 10.6.4 has just been released. It actually 
    addresses some CS3-specific issues, though they seem to be related to 
    launching the apps, not printing. It may be worth trying to update, 
    nonetheless.
    Peter Truskier
    Premedia Systems, Inc.
    510-655-4454
    >

  • Default printer problems with adobe 10.1.2

    I was having problems printing PDFs since upgrading to 10.1.2.  After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window.  The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC')  The second is "HP psc 2350 series" (lower case 'psc') .  The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly.  Now that I have solved my printing issue,  I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document.  The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window.  I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
    My computer runs in Windows 7 (64-bit).  The printer is HP psc 2355xi all-in-one.  Any suggestions are much appreciated

    I have not been able to select a different default printer for Adobe,  but I can print if I manually select the correct link everytime.
    Date: Tue, 6 Mar 2012 13:16:52 -0700
    From: [email protected]
    To: [email protected]
    Subject: default printer problems with adobe 10.1.2
        Re: default printer problems with adobe 10.1.2
        created by AMG13 in Adobe Reader - View the full discussion
    I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code

    unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code.  i don't believe mac allows for input on job code or printer code for permission to print

    I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
    One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
    Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

Maybe you are looking for