Printing Suddenly Stopped

My Canon i9900 just suddenly stopped printing from any computer in my home network. My MBP just started displaying all prior print jobs in the print queue, even those completed going back almost a full year. There was no way to clear the queue, so I reset the print settings, clearing out the printer entirely, and trashing the printer from the library. While I'm working through the problem from the one computer, I can't print from any other computer to this printer. Do I need to reset printing system on every computer? Seems odd that everything wouldlock up and cause all computers to need to be reset.

Just an update - I was able to print from a Windows computer hooked up to the same printer, so I know the printer is still functioning properly. Airport device also appears to be working properly. Next will check USB cable - after that I'm at a bit of a loss.

Similar Messages

  • AuthenTec finger print suddenly stopped working

    Hi,
    Suddenly today morning AuthenTec software on my notebook (3000 N200 0769) has stopped working. I am not getting the finger print option when I start my vista and further when I open the software it says AuthenTec not installed or sensor is switched off...!!
    Please, if anyone can suggest any solution than it will be really appreciated.
    Thanks,
    Dhaval
    Message Edited by Dhaval on 05-02-2009 02:00 PM

    Dhaval and mike161,
    Please email info[at]authentec.com with the details of your issues and ask for (me) Scott Poole.  I will do my best to assist you in determining what has gone wrong with your fingerprint sensors.
    -Scott
    Moderator Note; e-mail address edited. To help prevent Authentec's spam filter doing over-time.
    Message Edited by andyP on 07-01-2009 09:13 PM

  • Airport Express printing with HP printer suddenly stopped

    * I posted this in a different forum... thought I'd give it a try here *
    I'm using an iBook G4 with an AirPort Express Basestation and an HP Deskjet 3740.
    I know that the printer isn't on the list of "approved" printers BUT all had been going well for weeks but one day my printer stopped working with the AE (I can still print if I plug the printer directly into my computer).
    I've tried going back to the older firmware update.
    I've tried using the suggestions at iFelix (many people have had success with this but it hasn't worked for me... could I be doing something wrong?)
    When I open the printer utility and try to add a printer to rendezvous it searchs for a driver. My printer is listed in the window but it says no driver is found and I can't add it to the list.
    Any suggestions? I've even tried restoring my AE to factory settings.
    Thanks for any help!

    If you are using the AirPort Express and your main wireless router, you need to look for an all in one that can connect and function over a wireless network.
    If you are using another router there with an available ethernet port, look for an ethernet network device.
    Bottom line, your device needs to connect to your network using wireless or ethernet, not USB.

  • Printer suddenly stops printing

    I have CS 5 on a Mac Mavericks version OSX 10.9 and suddenly CS5 will not print, I get an error message  which reads" There was an error opening your printer, printing functions will not be available until you have selected a printer and reopened any documents", I can print from Microsoft applications and from iPhoto and Aperture. Epson suggest it must be an Adobe problem as the R2880 will print from other applications. It has been suggested that I reset CS5 to original but I cannot where to do that, any help please

    This was partly helpful thank you, I have updated manually and all updates have gone in and I can now get my RAW files to open,
    BUT
    Despite removing printer , downloading drivers again and then resetting printers still CS5 does not give me the option to print, I also have an Epson SX 200 which does not appear as an optional printer when I give the print command,
    I seem to be between a rock and a hard place here, Adobe seem to think it is an Epson fault and Epson say it is definitely Adobe fault,
    I have over £1000 value of CS5 and an Epson R2880 printer and cannot get a print from it.
    I am loathed to take up Adobe offer of paying for CS6 and Lightroom on a monthly basis then find I cannot print on that either,
    Perhaps I will have to go back to Aperture, which I do not want to, I can print ok from that, which again points to an Adobe problem,

  • Printing suddenly stopped: no preview anymore

    Hi,
    My MacBook Pro suddely stopped printing through USB on an Epson Stylus Photo.
    It doesn't matter wich account I use for logging in or whatever application, if I click on "Print", the print window comes up, but nothing is displayed in the preview (although is checked)and nothing prints. There is even an error saying: An error occurred while printing (or something alike). I use 10.4.x, even an upgrade to the latest 10.4.7 didn't help. Nor resetting the printer or reinstalling drivers. I checked disk-permissions with disk-utility (Apple): nothing helped.
    I think there is communication anyway with the printer. If I disconnect and remove the printersettings, after connecting again the printer it shows up again: so there is communication?
    Any help is very much appreciated!
    Thanks in advance.

    Just an update - I was able to print from a Windows computer hooked up to the same printer, so I know the printer is still functioning properly. Airport device also appears to be working properly. Next will check USB cable - after that I'm at a bit of a loss.

  • Printing SUDDENLY stopped working

    I'm suddenly unable to print on my MacBook Pro. Choosing Print in any application does nothing, and I see the following error in the console log:
    May 6 18:52:15 Mcohen-MacBookPro Safari[464]: * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
    May 6 18:52:27 Mcohen-MacBookPro Safari[464]: NSExceptionHandler has recorded the following exception:\nNSRangeException -- * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)\nStack trace: 0x1ef19a 0x90b880fb 0x937c102b 0x937c106a 0x92da03df 0x92d1e218 0x1f52ce6d 0x1f52b196 0x1f5407b2 0x1f54a79b 0x961e070a 0x9617e6f4 0x9641b917 0x9641af54 0xa7c0a 0x19de5c1 0xa7ad7 0x964ab5c5 0x964ab4d1 0x19de662 0x964ab1d8 0x96249e56 0x2ccc8 0x962f87cc 0x962f84d1 0x962d53ae 0x952a5fc3 0x952a53fd 0x952c1e0e 0x952f686d 0x9531cfbf 0x9531cf7c 0x9531ce7e 0x952f9b1e 0x952f9509 0x952f937d 0x96211f77 0x96178c72 0x9617808e 0x7f2e 0x961710c5 0x9613e30a 0xb9906 0x2
    May 6 18:52:27 Mcohen-MacBookPro Safari[464]: * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
    I use 3 shared printers with my MacBook Pro: a Brother HL1440 (shared from my Mac Mini), a Brother MFC420CN connected to my router, and an HP PhotoSmart A620 shared from my Buffalo TeraStation. My MBP is networked wirelessly to an Airport Extreme 802.11n base station.
    I've tried resetting the printing system, clearing caches, multiple restarts, and running FixAirportPrinter (which shows an empty list). The only thing that changed was installing VMware 2.0 today.

    Hello Mike:
    A place to start would be to uninstall the VMware application you mention (I have no clue what it does as I do not use it). Third party applications sometimes do not play well with OS X. If you do not want to do that, contact the software developer.
    Barry

  • Printer Suddenly Stopped Printing in Color

    To isolate the problem to the printer, I printed a supplies status and printer test page from the printer touchscreen. They both printed in b/w. Any help much appreciated.

    Hi @EMSFL,
    Welcome to the HP Forums!
    I see that your HP Envy 110 will not print in color and that the black is streaky. I am sorry to hear that but I am happy to help!
    For further assistance, I will need to know: 
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    If you are using genuine HP ink cartridges or refills.
    In the meantime, please see this print quality guide. Troubleshooting Print Quality Issues.
    Hope this guide helps, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My printer suddenly stopped working. What do I do

    I have an HP Officejet 6500, whichis not turning on at all.

    Try rebooting the phone by holding both the sleep and the home button together until the apple logo appears and then wait for the phone to restart.  No data will be lost

  • Printer has stopped printing in black, HP Printer Photosmart 5514

    My printer suddenly stopped printing in black. We have two computers networked wirelessly, and from my husband's computer there are no problems. From my computer I can print other colors, but not black. Test prints print in colors but not black. I have tried uninstalling software, reinstalling, and reconfiguring for wireless without success. Reinstallation seems to have gone OK but problem is not resolved. I have also tried to connect via a USB port, but no success here either. I turned off the firewall for the last installation but this did not help either.
    Printer: HP Photosmart 5514
    OS: Windows 7
    No error message just blank pages
    No system changes made
    This question was solved.
    View Solution.

    Start by following the troubleshooting steps in this document, especially check the vent as shown in step three of Solution Six.
    I suspect when you print the test page in Solution Six there will be no black ink on the page.  Most likely the computer you have that appears to print in black has its media settings set to photo paper, which would use the color inks to print black.
    If the printer is in warranty I would suggest you Contact HP for replacement.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printing from desktop suddenly stopped

    printing from desktop suddenly stopped 2 days ago; remote printing still works perfectly; desktop shows printer "uninstalled." Print doctor says the printer and desktop are connected to different routers, but nothing has been changed; the issue simply arose suddenly, so I don't think this is an accurate diagnosis. When I try to install the printer again, it says the IP # is already installed (which it is and it prints from a laptop, just shows "uninstalled" for desktop printing. ) Help!
    This question was solved.
    View Solution.

    Sharon,
    Welcome to the HP Community Forum.
    If I understand what you are saying, it appears that one computer - the notebook - is working correctly to print.
    A different computer -- a Desktop computer - does not print, and is showing an error indicating that the printer is not connected properly (or something similar).
    Assuming you are using DHCP and not a Static IP address for the Printer, the following might apply to your setup.
    You might try / consider the following to try and fix the problem for the Desktop computer:
    On the Desktop:  Remove the Printer software from Control Panel > set icon view > Programs and Features > Right-Click >> Uninstall
    Shut down the Desktop Computer
    Optional
    Disconnect the extra bits from the Desktop -- USB drives, speakers, other unnecessary devices.  Leave the monitor and mouse connected; these are considered necessary.
    Unplug the Desktop computer for thirty seconds
    Reconnect the Desktop computer to the power (plug in)
    Reconnect the Desktop's devices as desired:  USB drives, etc.
    Shut down the Notebook, using proper shutdown protocols
    Shut down the Printer
    Switch off the Router - wait ten - fifteen seconds...
    Switch on the Router - wait thirty seconds for the Router to boot completely...
    Boot Notebook, Desktop computer,  and then start the Printer
    Install the Full Feature Software onto the Desktop computer:
    Install Full Feature Software – Printer
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

    May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
    Any suggestions?

    EPSON Stylus CX4800 All-in-One Printer
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

  • 1300 suddenly stops printing multiple copies

    My Laserjet 1300 suddenly stopped printing multiple copies. I am using the driver supplied with win7 and it has been working for the last year. I have tried installing PCL6 driver instead of PCL5 and I can print multiple copies for one job only and then the computer does not recognize the printer. Has HP sent an update that has changed the way win7 works with the printer? Any one with a solution or idea?  Thanks, John

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP2600n suddenly stopped printing in Windows 7 system 64-bit--wh​y? No error mes, no system changes

    After two months, HP2600n suddenly stopped printing in Windows 7 system 64-bit--why?  No error mes, no system changes.
    I tried reinstalling the drivers, changing USB ports and cables, printing from Notepad, and disconnecting the  printer.
    My computer will not let me uninstall the driver software, and I tried downloading the software upgrade to do that.
    Printer works with computer running XP.
    I am guessing that I need a driver upgrade.
    Which one?
    Thanks, whoever!

    Which version of the tool box are you using?Mine would not open after installting updates but after installating the latest version its working fine 
    http://www-307.ibm.com/pc/support/site.wss/MIGR-73783.html 
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • When I'm ordering prints from Apple, the transfer of data begins and then suddenly stops.  Cannot transfer pics.

    When I'm ordering prints from Apple, the transfer of data begins and then suddenly stops.  The file is not completely transferred and no prints can be ordered.

    Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
    OT

  • My iPad has suddenly stopped printing to my hp AirPrint printer although it says that it has contacted the printer. My iPhone still prints o.k.

    My iPad has suddenly stopped printing to my hp AirPrint printer. It was working fine but now although it says it has contacted .the printer etc. nothing prints. My iPhone still prints o.k. So don't think it is the printer or router

    Try rebooting your iPad by pressing and holding the Home and Sleep buttons at the same time until the Apple symbol appears (Ignore the power off slider).

Maybe you are looking for

  • 55TL515U no longer supports amplifier output from Net TV apps

    I have been happy with my 55TL515U for the 2 years or so I've had it but this latest episode has me very frustrated. This is the setup that has been working flawlessly for me: HDMI 1 is connected to my Yamaha RX-371 receiver as its HDMI output. I als

  • QuickVPN and Windows 8

    I had been using QuickVPN from home to connect to an RVS4000 at my office. I recetnly updgraded to a RV180W. I can connect a Windows 7 Pro PC on my home network to the RV180W with QuickVPN. But I cannot conncect with a Windos 8 laptop. I have tried a

  • Updating to 2.0 from a computer that is not mine?

    Alright, everyone. I have a small problem. I am on a trip, and the only computer that I have access to belongs to a friend of mine. Now, I can download the update through iTunes, but I cannot figure out how to backup my iPod for the big erase. I am o

  • Pavilion zt 1172 notebook

    I have a pavilion zt1172 notebook which i am trying to upgrade to usb 2.0 can anyone instruct me as to the best pcmcia card to purchase, i only need it to operate my logitech web cam/hp printer and my remote mouse.

  • [SOLVED] Missing LADSPA support and bs2b in mpv

    I'm missing LADSPA support in mpv. (I know that mplayer2 supports it, in general.) Specifically, when I run mpv the following way, I get an error message: $ mpv --af=ladspa=/usr/lib/ladspa/cmt.so:amp_stereo:1 some.avi Option af: ladspa doesn't exist.