Printing the Resource Profile in the Tracking View

As above.
Struggling to print the profile section of the Tracking View - there's a checkbox to print the profile, but it's greyed out.
Any suggestions - or a "it's not possible" - appreciated
Versiobn 6.2.1 - SP 3
David

Hi,
after selecting a resource in Resource Center, use "Resource Assignments" in the ribbon. In Resource Assignments view, use "Timephase Data" (second button from left).
This will give you information about Actual Work.
Hope that helps?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Similar Messages

  • Windows cannot load the user's profile but has logged you on with the default profile for the system.

    My Windows 7  crashed a couple days ago after a windows update, I got this message.
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    I restarted the machine and got this message
    Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
    DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
    I checked the event Log I found these .
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
     DETAIL - The process cannot access the file because it is being used by another process.
    This is the first error in the event viewer after a successful logon
    The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
     If the event originated on another computer, the display information had to be saved with the event.
    ccSetMgr
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Access is denied.
    Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
    The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    then this one
    The Desktop Window Manager has exited with code (0x40010004)
    Then this before it shutdown.
    The User Profile Service has stopped.
    I started up the PC and the first message I got was
    How can I get access to my user profile? do I need to createa new Administrator account? Please help
    The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

    hi do the following
    1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
    2. If prompted click yes,
    3.  expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
    something similair)
    5. right click the sid and press delete.
    6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
    in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
    i cant remember which one is which but just check both, one will still have all your files and folders in it.
    i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

  • When i add a background image to form and it gives me such kind of issues so i have deleted the resource file in the solution explorer and then when i reopened my projectt it again gives errors of missing root element of InvalidResx.file amd of XMl.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.
    Hello,
    It will be more specific if you could share the screenshot of that error with us.
    In addition, if this issue is mainly related to the BackGroundimage property, you could consider using the following suggestion.
    We could click our project to expand the nodes and click "InitializeComponent()" to navigate to its desiginer code.
    Then check whether there is a line which has " Me.BackgroundImage =", remove that line and then remove the resource file with the following step.
    Project property->Resources->Switch "Files" or "Images" to see where you have setted for that image file, find it and remove it.
    Then save all your changes to see whether it's OK.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Camera Raw RC 8.6 does not automatically locate the lens profile for the new Canon 16-35mm f4 lens.  The profile is in RC 8.6

    I have loaded Camera Raw RC 8.6.  It can not automatically locate the new Canon 16-35mm f4 lens, although the lens profile can be manually found.

    Hi
    I forgot to answer one question.
    When I have a file from the Canon 16-35mm f4 lens in Camera Raw and go to 
    Lens Correction and check the box Enable Lens Profile Corrections, when I
    select  the model in the first box as Canon, it picks the wrong 16-35mm lens. 
    It  picks the f2.8.  I hope that you can get this fixed in Raw 8.6.  It is 
    a major headache for the user of this new lens.
    In a message dated 7/28/2014 3:10:44 P.M. Central Daylight Time, 
    [email protected] writes:
    Camera  Raw RC 8.6 does not automatically locate the lens profile for the
    new  Canon 16-35mm f4 lens.  The profile is in RC 8.6
    created by ccastleb (https://forums.adobe.com/people/ccastleb)  in Adobe 
    Camera Raw - View the full  discussion
    (https://forums.adobe.com/message/6591754#6591754)

  • Can Not Calibrate the display. The factory profile for the display...

    I have an apple cinema display 20" and a mac powerbook g4 (1.25 GHx PowerPC g4, 1.25 GB DDR SDRAM) with os 10.4.9. All of my software is up to is date.
    I used to be able to calibrate my colorsync profiles. My computer's hard drive recently failed and I had it replaced and the system re-installed (If any of you live in NYC, I took it to tek Serve, and they know what they are doing).
    Now when I try to calinbrate my monitor I get the error "Can Not Calibrate the display. The factory profile for the display could not be found." Like I said I have updated to 10.4.9 but this hasnt solved my problem. I have restarted my computer, and this has also not solved my problem.
    Any help!?! Please! This is important to me as I do color work for print and I need to see colors accurately When I use my computer.

    I fixed it already. There was indeed a problem in the preferences. In my case I removed the whole preferences folrder to the desktop (which forces the computer to rebuild it fresh) and it worked fine! Then one at a time 'as it was needed, I put back the preferences for other applications (mail, itunes etc). Turns out no preferences was better than whatever corrupted preference was in there causing the problem. You know what I mean. If no preferences are there the applications start over building it new automatically. So it was like a preferences restart. sorta.
    Unfortunately, since I dont have applecare I had to spend 50 bucks on the phone with apple to figure this out. It's amazing how long it took them to actually pinpoint the problem. Hopefully if anyone gets that error in the future they'll find this post on google and save some bucks.

  • How to render web items based on the authorisation profile of the user

    Hello,
    Is there any way to render web items based on the authorisation profile of the user. The only way i can think of is:
    - Write ABAP to look up into the security mapping tables.
    - Convert the ABAP report into RFC-Enabled FM. The selection variables will be part of the import/export parameters of FM and table can be used to display the result.
    - Create HTML template using WAD, write Java Script to call the FM and map the import/export parameter. Display the result in Table.
    But i don't know How to use the Java Script to call Function Module (FM) and get back the authorization through parameter.
    Is anyone know about it or is there any other method to do it? I can't find any solution and it is very critical for me.
    Any help is highly appreciated.
    Rajat

    Hi Rajat,
    Do you mean that you want certain users to be able to use only certain web items? I think you can use the libraries for that and assign them to roles:
    http://help.sap.com/saphelp_nw04/helpdata/en/4e/0f813b420ce60ee10000000a114084/content.htm
    Hope this helps...

  • TS1702 We use one ID for  the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

    We use one ID for  the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

    This happens when you both use the same Apple ID for iMessage.  To fix this you have two choices:
    On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".  Also uncheck the other phone's phone number, if present.

  • Need Help! "Could not locate the resource file in the Configuration folder."

    I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
    ~Todd

    Nadia,
    Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
    First I downloaded both Cleaning  scripts. For CS4 & CS3.
    Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
    Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
    Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
    Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
    I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
    After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
    I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
    I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
    I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
    Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

  • "Could not locate the Resources file in the Configuration folder"

    While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says:  "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
    After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it.  Not sure where else to turn.  Please advise.  Thanks

    See if this previous thread regarding the same issue will help:
    http://forums.adobe.com/message/2274699#2274699
    Nadia
    Adobe Community Expert : Dreamweaver
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    Web Design & Development
    http://www.perrelink.com.au
    http://twitter.com/nadiap

  • The factory profile for the display could not be found.

    Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

    There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
    1) Download a copy of Plistedit Pro. It's shareware, so donate!
    2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
    Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
    I can now colour calibrate my iMac again. Phew!!!

  • Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

    Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

    ok thankx!  but i must to know the output impendatie of my  audio card= intel high definition audio? can somebody help me
    this is my mac book
    http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

  • Does the Resource Profile LOGICAL_READS_PER_CALL count TEMP

    Does anyone know if the profile resource LOCIAL_READS_PER_CALL counts reads from the TEMP/SORT segment.
    The reason I'm asking is because we had an adhoc report user write a query that caused a huge cartiesian product that consumed all of the temp tablespace, 8.5G. The knee-jerk reaction would be to add more space to the TEMP tablespace, but the poorly written query was the problem. The user running the query does have a profile that restricts the LOGICAL_READS_PER_CALL to 3500000. The query did fail since it could not allocate any space from the TEMP tablespace, but not before it caused two other sessions to fail for the same reason. The query had several sort/merge operations so I was hoping that when it was reading back from a temp segment it would be added to the counter and would then terminate the session.
    If this counter is not used for TEMP reads does anyone know of another way to limit the amount of temp space for a particular user?

    Logical read concerns the block read into the buffer no ? So I don't see relation with the tablespace TEMP.

  • I moved to a new pc but have the FF profile from the old one and how do I find out which FF version the old FF was?

    I want to use the old version of FF from my previous pc. I saved the profile folder etc on the old pc. The old HD is attached to the new pc via USB. How do I tell what version the old one was?
    After installing the old version on the new pc I want to use the former FF profile file on the new pc installation of FF.
    I have the sessionstore backups etc. from 3/21.
    BTW I typed all this info earlier and support automatically butted in with a guess to what would be an answer. And in the process overwrote what I typed. Please try to get mozilla to prohibit this behavior.

    Sorry to hear that the forum lost your question.
    I'm not sure I understand why you need an old version of Firefox. Were you way behind in updates? Normally when you install the current version, it will seamlessly update/convert any obsolete files in your profile folder to current versions.
    Perhaps I'm answering the wrong question. If the question is: "how do I get a new installation of Firefox to use all my old settings" then I can give you a way to do that.
    ''This assumes you might have data in your new Firefox that you don't want to overwrite and preserves your current profile.''
    Go ahead and open your old profile folder in a Windows Explorer folder. At this level you should see a bookmarkbackups folder, among others. Later you'll copy the ''entire contents'' of the old profile folder to a new location on your C drive.
    '''Overview'''
    These are the steps:
    # Create a new Firefox profile
    # Remove everything from that new profile folder
    # Copy in everything from the old profile folder
    '''Create a new Firefox profile (Windows)'''
    Exit Firefox and start up in the Profile Manager by pasting the following into the Start menu search box (or Run dialog) and pressing Enter:
    firefox.exe -P
    ''Do not delete anything here! Any time you want to switch profiles, exit Firefox and return to this dialog.''
    Click the Create Profile button, assign a name like OldSettings, and skip the option to change the folder location. Then select that new profile in the dialog and start Firefox.
    '''Open the New Profile folder in Windows Explorer'''
    Firefox in the new profile should look like a factory fresh installation. Open the Troubleshooting Information page using either:
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * Help menu > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table, click the "Show Folder" button. Firefox will launch your brand new profile folder in Windows Explorer.
    Leaving that folder open, switch back to Firefox, and Exit. Either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    When Firefox closes, the profile folder should be front and center, or you can activate it using the Task bar.
    '''Copy Old Data in Place of New'''
    In that new profile folder, select all the contents and delete.
    Leaving that window open, switch over to your old profile folder. At this level you should see a file named places.sqlite. If that isn't visible, try moving up a level until you find it.
    Select everything (Ctrl+a) and Copy (either right-click > Copy or Ctrl+c).
    Switch to the empty new profile folder in other window and Paste (either right-click > Paste or Ctrl+v). This may take a minute since some of the files are large.
    '''Start Firefox'''
    Firefox should start up in that new profile with the resurrected old profile data. Success?

  • I was upgrading to iOS5, backed up files on my iphone4, when relaunching the iPhone, I decided to create a new profile (and then copy all contacts from the old profile). The old profile then got erased, together with all contacts. No old profile in iTunes

    I was upgrading my iPhone 4 to iOS 5. The old files in my profile backed up. When relaunching the iPhone, I decided to create new profile on the iPhone, thinking I could copy my old contacts from the old profile (as iCloud seems to merge all contacts). When the ne profile was created on the iPhone, the old profile on iTunes disappared without a trace.  Please help restore my contacts.

    Did you use the Profile Manager or did you use reset to create that new profile?
    *https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
    A reset tries to import some data from the old profile and then moves the profile to the desktop, but if you use the Profile Manager then you need to copy that data yourself to the new profile.
    If you've deleted the old profile before making sure that your data has been recovered then you've lost that personal data.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How can i locate the resource file in the weblogic?

    hello
    in struts, i can leave some parameter in a resource file (such as "Application.properties")outside of my code,and get them in the "Action" class by the "getResource" method.
    in my data access tier,i still want to use such a machanism but i can't use the "getResource()" method,for example,there is a ConnectionPool class,i want to read some parameters from a resource file ("param.properties") that is under the same directory as the ConnectionPool class,the following is the code snippet:
    public static void init(DataSource ds){
    myself=new ConnectionPool(ds);
    java.util.Properties prop=new java.util.Properties();
    try{
    java.io.FileInputStream fin=new java.io.FileInputStream("./param.properties");
    prop.load(fin);
    }catch(Exception e){
    e.printStackTrace();
    System.out.println(prop.get("help.create"));
    the "ConnectionPool" class is in the "com.jhtop.task.forum.db.util" package,the "param.properties" is in the same package (com.jhtop.task.forum.db.util),
    but when i execute the program,it tell me that it can't find the file.if i use the absolute path,it works.
    i wonder how can i locate the file path in the weblogic,or what's my current path,or how may i setup my work directory?
    in tomcat,my current directory is bin directory,how about weblogic?
    who can help me?thank you!

    My english is bad and I'm not sure I've well understood your problem.
    How have you created your file ?
    Why do you put it in such a directory and not an other ?

Maybe you are looking for